Tool room milling machine

Deckel FP1Aktiv

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed very good CONDITION Technical data: >> Year of construction 1990 Machine no. 2102-5046 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes Fsdpfx Adou Um Erj Nsgi >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electrical central lubrication >> Coolant device >> Operating instructions, spare parts plan Gojs3G About the machine : Universal milling machine Deckel FP1 built in 1990 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: new, Year of construction: 2023, machine/vehicle number: PRJ065958, ALZMETALL bench drilling machine drilling capacity in steel 16mm Short spindle MK2, spindle stroke: 80mm, throat: 190mm, column diameter: 65mm, machine table usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-table min./max. 75/357mm, machine table height adjustment via hand crank, machine table base plate, usable support: 300x240mm, with T-slots 2 x 12mm x 80mm, distance spindle-base plate min. / max. 437/437mm, feed by hand, machine height without options: 825mm, net weight: 83 kg. - Speed infinitely variable 100-2000 rpm Fsdpfx Adolubw Io Negi Standard equipment: 5" TFT - LCD display with touch function: manual input spindle speed setpoint, speed display actual value, integrated drilling depth display with touch zero point acceptance, virtual drilling depth scale in the display, machine status indicators and warnings in the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. AC motor 230 Volt, 50 Hz, Connector plug ready mounted, Cable length 2m, Three separate buttons for clockwise - anticlockwise - stop, spindle stop by brake function, spindle protection with electrical fuse, main switch lockable, mushroom pushbutton (latching) for EMERGENCY STOP, speed adjustment infinitely variable by means of potentiometer, protection class IP54, spindle protection with electrical fuse, paint: DD structure paint signal white RAL 9003, PANTONE 7545c, black incl. the following options: LED machine light pos. 12. Delivery time: ex stock Waiblingen Beinstein

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 340 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, Ladies and Gentlemen, We hereby offer a Deckel FP1 3-axis active milling machine with retrofitted safety devices. These machines of the newer version have, among other things, central lubrication, an electric coolant pump and a brake motor. In addition, the control cabinet can be disconnected from the machine in no time at all thanks to the Harting plug. This type of connector is also used to connect the safety components to the control cabinet, so that handling is not compromised in any way. The retrofitted safety devices, which we can offer for every machine type, come with a 12-month guarantee! The electronic spindle guard can be adjusted in several axes and is designed to prevent interference with the working spindle as well as hazards from flying chips, coolant, etc. The electronic spindle protection cap is designed to prevent interference with the rotating stub shaft and tool clamping. Delivery time: on request Fedpfxsuw Uu Nj Ad Nsgi Year of manufacture: 1989-1992 Machine no. 2102-xxxx Table: rigid angular table Travel: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1,9KW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Stepless 5-500 mm/min Rapid traverse: 1200mm/min Equipment and accessories: Coolant device, central lubrication, manual, machine feet, electronic spindle protection, electronic spindle protection cap Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and any worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, you can also order additional accessories such as tools etc. directly - On request, we can install additional accessories such as safety devices etc. - We are happy to take care of shipping and/or installation

Condition: reconditioned (used), Deckel FP1 AKTIV (3-Axis Active) Machine No. 2102-5745 Year of manufacture: approx. 1988 Travel distances: X-axis: 300 mm Y-axis: 150 mm Z-axis: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - HEIDENHAIN 3-axis active digital readout, type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill movement on vertical milling head: 60 mm - Vertical milling head swivels and extends horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Centralized lubrication Space requirements (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been visually refurbished and technically inspected. Geometry measurement videos can be provided upon request. Fedpfx Adsxpwfgj Njgi Backlash Y-axis: 0.15 mm Backlash X-axis: 0.3 mm Backlash Z-axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y-axis: 0.002 mm (measuring length 150 mm) Parallelism deviation X-axis: 0.002 mm (measuring length 300 mm) The following parts have been renewed: - Centralized lubrication checked - Heidenhain digital readout overhauled - New wiper set installed - LEDs in the Active display replaced - Oil changed - Vertical milling head fitted with new bearings - Oil sight glass replaced Net price, ex stock, free loaded

Condition: reconditioned (used), Year of construction: 1994, Universal Tool Milling Machine DECKEL FP 1 With 3-axis active digital readout Heidenhain TNC 123 Year of manufacture: 1994 Travel: X 300 mm, Y 160 mm, Z 340 mm Spindle speed range: 40 – 2000 rpm Comes with the following accessories: Fixed angle table, 600 mm x 250 mm clamping surface Fsdpfx Asw Agxrjd Nogi Movable vertical milling head Extendable quill Infinitely variable feed via potentiometer 1 machine vice 1 tailstock with counter bearing 1 long milling arbor Ø 22 mm, Ø 16 mm, Ø 27 mm Various tool holders S 22 x 2 Z axis bellows 1 chip guard Machine lamp Automatic central lubrication pump Coolant system Operating manual THE MACHINE IS IN EXCELLENT CONDITION! THE MACHINE COMES FROM A TRAINING WORKSHOP!

Condition: good (used), functionality: fully functional, DECKEL FP1 Active milling machine Manufacturer: Deckel Type: FP1 Active Condition: very good Control type conventional Control active HEIDENHAIN TNC X-path 300 mm Y-path 160 mm Z-path 340 mm Tool holder SK40 Fgedpjxnniasfx Ad Nei Speed 40-2000 rpm. Control Active HEIDENHAIN TNC Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. TBH 1200x1100x1600 mm

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and infinitely variable feed Super CONDITION Technical data: >> Year of construction 1984 Machine no. 2102-2601 >> Turn-tilt-swivel table >> Speed: 40 - 2000 rpm >> feed stepless in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: Dpbyzb >> 3-axis digital display Heidenhain TNC113 >> Coolant device >> Operating instructions, spare parts plan To the machine : We are offering a Deckel FP1 universal milling machine built in 1984 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training workshop where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site. Fedpju Racrofx Ad Negi

Condition: used, Year of construction: 1989, Universal tool milling machine Make: DECKEL Model: FP 1 Active Year of manufacture: 1989 - workshop tested Fjdpfjr En Dyox Ad Njgi Machine no.: 2102-5561 Milling head type: 2171 Milling head number: 4393 geometric acceptance with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 with active function in X-, Y- and Z-axis - Fixed table 600 x 210 (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Coolant device - Central lubrication, electric - Operating instructions used as seen, without guarantee The machine corresponds technically the state of the year of construction at that time.

Condition: reconditioned (used), Year of construction: 1989, Dear Sir or Madam, for sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly distinguished by its ease of operation. This newer version from year of manufacture 1989 has among other things a central lubrication, an electric coolant pump and a machine lamp. The machine has been extensively overhauled in our workshop and is therefore in excellent condition. You can convince yourself of this on site. In the course of the partial overhaul, among other things, the following work was performed: - Spindle bearing of the milling head renewed - Repainting - Various standard parts such as handles, oil sight glasses, keys etc. renewed - Wear parts like drive belts etc. renewed - Bellows partly renewed - V-guides adjusted - and much more... Delivery time: immediately year of manufacture: 1989 Machine No. 2102-xxxx Table: rigid angle table travels: X300mm/Y160mm/Z340mm quill stroke: 60mm Connected power: 1,9KW number of spindle speed: 16 Speed range: 40-2000 rpm Dlp00n tool holder: SK40 feed rate: stepless 5-500 mm/min rapid traverse: 1200mm/min Equipment and accessories: coolant system, central lubrication, manual, machine feet Fgsdpfopy Eldox Ad Noi Our service promise to you: - We are a certified master company in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and possibly worn parts are exchanged in advance - On request, we overhaul the selected machine completely or in part - If desired, they can order additional accessories such as tools, etc. directly with - On request we can mount further accessories like safety devices etc. for you - Gladly we take care of the dispatch and/or the bringing in

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Equipment: documentation/manual, F729 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 113 Heidenhain and stepless feed very good CONDITION Technical data: >> year of construction 1992 machine no. 2102-6289 >> Rigid angle table (newly planed) >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 Bmbwuweo9T3 Fedsu T D Nrjpfx Ad Negi >> Coolant device >> Operating instructions, spare parts plan To the machine : We offer a Deckel FP1 universal milling machine built in 1992 in very good condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this machine under power on site.

Condition: good (used), Year of construction: 1995, Universal tool milling machine cover FP 1 several machines see pictures Type : FP 1 3-axis digital readout Heidenhain Price : from 9.500€ excl. VAT Technical data: x-path: 300 mm y-path: 150 mm z-path: 340 mm Fgodpetdcfhofx Ad Noi Clamping surface: 600 x 210 mm T-slots: 5 T - slot width: 12 mm Speed range - vertical: 250 - 2000 rpm Speed range - horizontal: 40 - 315 rpm Speed steps work spindle: 8 Feed range: 10 - 500 mm/min Feed steps: 8 Quill stroke: 60 mm Spindle holder: SK 40 ... Dimensions/weight: 1235x1160x1800 / approx. 800kg

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, F736 Universal milling machine Deckel FP1 with 3-axis active digital readout TNC 111 Heidenhain 2008 Retrofit at FA Huttelmaier Very good CONDITION Technical data: >> Year of construction 1985 Machine no. 2102-2891 >> Rigid angle table >> Speed: 40 - 2000 rpm Fedsu Nvwvjpfx Ad Nsgi >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC111 >> Coolant device >> Operating instructions, spare parts plan To the machine : Universal milling machine Deckel FP1 built in 1985 in very good condition. The FP1 was overhauled by Huttelmaier in 2008. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed rate is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: like new (used), Year of construction: 1987, functionality: fully functional, Equipment: documentation/manual, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and infinitely variable feed Mint CONDITION Technical data: >> Year of manufacture 1987 Machine no. 2102-3536 >> Rigid angle table >> Speed: 40 - 2000 rpm >> Infinitely variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power .:1,5 / 1,9 KW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head can be moved 100 mm on headstock >> Vertical quill and horizontal quill - SK40 >> Tightening system S20x2 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital readout Heidenhain TNC113 >> Electric central lubrication >> Machine lamp >> Coolant device >> Operating instructions, spare parts plan About the machine : Fgjdpfx Adeu R D I Ss Noi Ccbroxg Universal milling machine Deckel FP1 built in 1987 in mint original condition. The machine has very little crank play and all spindles can be moved easily. The milling machine runs very smoothly even at maximum speeds. On this newer FP1 model, the feed is infinitely variable in three axes, and the machine also has rapid traverse in these axes. A great advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. The FP1 was in a training company where it was only used occasionally. An oil change was carried out. Mechanically and electrically tested. The Heidenhain digital display makes work easier and even more accurate. Take the opportunity to inspect and try out this little gem under power on site.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, 3-Axis Active Linear Control Heidenhain TNC 123 Speed 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque/milling performance Feed 5 to 500 mm/min, continuously variable Rapid traverse 1.2 m/min Fodpfjv Nqu Ejx Ad Nogi Quill: Extendable quill, vertical 60 mm SK40 M16 drawbar thread X/Y/Z axes 300/160/340 mm Angle table 600 x 210 mm, max. load 200 kg

Condition: excellent (used), functionality: fully functional, Universal Milling Machine Deckel FP1 with 3-Axis Active Digital Readout TNC 113 Heidenhain and Infinitely Variable Feed, Light Grey, Excellent Condition Technical Data: >> Year of manufacture: approx. 1990, Machine no. 2102-5231 >> Fixed angle table Fjdpfx Asxu E R Ijd Nsgi >> Spindle speed: 40 - 2000 rpm >> Infinitely variable feed on all 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel X/Y/Z: 300/160/340 mm >> Vertical milling head adjustable by 100 mm on spindle carrier >> Vertical and horizontal quill - SK40 >> Drawbar system M16 >> Weight: approx. 800 kg Accessories and Equipment: >> 3-axis digital readout Heidenhain TNC113 >> Central electric lubrication >> Coolant system >> Operating manual, spare parts diagram About the Machine: Offered is a Universal Milling Machine Deckel FP1 in very good condition in light grey. The machine has minimal backlash and all spindles move smoothly. Even at maximum spindle speeds, the milling machine runs very quietly. In this newer FP1 model, the feed is infinitely variable in all three axes; in addition, rapid traverse is available in these axes. A significant advantage is the active 3-axis digital readout. With this Heidenhain positioning control, you can input dimensions that the machine will automatically move to. The FP1 was previously used in a training workshop, where it was only operated occasionally. The oil has been changed. Mechanically and electrically inspected. The Heidenhain digital readout makes working easier and even more precise. Take advantage of the opportunity to view and test this exceptional machine under power on site. The machine is available immediately.