Used thread rolling machines for sale (64)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1028, Thread Rolling Machine LEISTRITZ RT 400-CCA Year of manufacture: 2004 / Control system retrofit in 2019 Connection voltage: 3x400 V Frequency: 50 Hz Rated power: 65 kW Main fuse: 125 A Operating pressure: Air: 6 bar, Oil: 270 bar Control voltage: 24 VDC Maximum shaft length: 275 mm Psdpoxytmhefx Abksgn Minimum shaft length: 125 mm Maximum roll set diameter: Tool Ø69.85: 215 mm, Tool Ø80: 210 mm Minimum roll set diameter: Tool Ø69.85: 176-178 mm, Tool Ø80: 176 mm Maximum rolling force: 40 t Space requirement: 3.4 m x 2.9 m x 2.2 m Weight: 4900 kg Accessories: - Coolant filtration system - Second spindle pair (1x for tools Ø69.85 mm, 1x for tools Ø80 mm)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Type RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Pgjdpszb Imasfx Abksn Reference: F24

Condition: good (used), Year of construction: 2002, functionality: fully functional, Pressing force: 10 t Workpiece diameter - max.: 2-50 mm Control system: SIEMENS SIMATIC Total power consumption: 12 kW Machine weight (approx.): 2.5 t Dimensions L x W x H: 1300 x 1500 x 1600 mm Roller stroke: 80 mm Smallest/largest center distance between roller spindles: 117/197 mm Roller spindle height above machine bed: 160 mm Max. tool diameter: 175 mm Roller spindle mounting diameter: 54 mm Roller spindle mounting length: 75 mm Swiveling angle of roller spindle: -/+ 10 degrees Roller spindle speed (variable): 10-100 rpm Pgodezd Dibjpfx Abkjn Motor for roller spindle drive: 7.5 kW Accessories: several thread rolling tool sets

Condition: used, Year of construction: 1971, machine/vehicle number: 15162, Roller diameter 150 mm, coolant device and machine lamp Pedpfey Sqigsx Abkegn

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm Pgodpfx Aozd Hhasbken roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Machine width 1450 mm Podjv Tqdbspfx Abkjgn Standard machine depth 900 mm Total machine height 1800 mm

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t Pjdpfxst Hw N Tj Abkegn dimensions of the machine ca. m

Condition: used, Year of construction: 1991, workpiece diameter 30 mm threading length 110 mm Pgjdpfx Ajt Hwzcsbkjn thread pitch 0,5-2,75 mm/GG total power requirement 4,5 kW weight of the machine ca. 1,7 t dimensions of the machine ca. m

Condition: used, TECHNICAL DETAILS - Max. part length : 1350 [mm] - Max. teeth length : 1200 [mm] - Max. teeth diameter : 120 [mm] - Power : 18,5 [kW] - Machine dimensions : 2840 x 1700 x 1420 [mm] Pgjdouhb Unepfx Abkon

Condition: used, TECHNICAL DETAILS - max. power : 40 [t] - max. workpiece diameter : 40 [mm] - spindle diameter : 80 [mm] - spindle length : 120 [mm] - max. tool diameter : 250 [mm] Pgedpfxeuhb Uhj Abken - dimensions : 2400 x 2100 x 2200 [mm] - weight : 7100 [kg] EQUIPMENT - control CNC (base Siemens) - tail stock device - coolant tank with pump - 2 boring wheel 80, diameter : 260 [mm]

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Pedpfx Absyml Ekokegn Spindle diameter : 69.85mm - Power of main motor: 7.5kw Photographs taken before reconditioning

Condition: good (used), Year of construction: 1998, FOR SALE: ORT ITALIA RP 24 Thread Rolling Machine Precision machine for thread forming, ideal for high-performance industrial production. Pgedpfx Abjy Shd Iekon Capacity & Technical Details Pressing force: 24 tonnes. Brand: ORT Italia. Model: RP 24. Year: 1998 Power supply: 380V / 20A. Equipment Automation: Integrated automatic loading. Control: Digital control panel. Ejection: Discharge chute included.

Condition: refurbished (used), Year of construction: 2026, ORT RP30 MS 2-roll 30 tons thread rolling, knurling, small gears Overhaul 2026 Podpfx Aouykz Djbksgn 2026 Electronic overhaul and electronic retrofit with Siemens PLC (2026) The machine is visible under power in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools Power (Ton): 30 Number of rollers: 2 PLC: Yes

Condition: good (used), Year of construction: 1998, thread length: 65 mm, Treading machine ORT Italia - RT 10 MACH-ID 9322 Make: ORT Italia Type: RT 10 Control: Siemens SIMATEC Year: 1998 Maximum pressure: 10T Max. workpiece: 30Ø Min. workpiece: 2Ø Min. Threading lenght:2mm Max. Threading length:65mm Pitch / lead: 30mm Shaft Ø: 85 - 135mm Podpfjx H Rmusx Abkogn Length: 1600mm Width: 1400mm Height: 1800mm Weight: 2300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW Podpfx Ajvpaa Robkjgn weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: used, ORT 3RP10 PLC thread rolling machine Pgedpfxszbx D Ns Abkjn inverter (RPM) scaffolding sleeves threading, shelves studs threading Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools Thread rolling is a metal forging process that forms threads into the mirror image of a roller die. Number of rollers: 3

Condition: used, ORT LE60 2-roll lapping-rolling-burnishing machine (of cylindrical surfaces), stainless steel shafts for example This machine can be inspected under power in our warehouse. We can supply the know-how required to run it Mimu Machine Tools Podpfxjzbx Dcs Abksgn

Condition: used, Year of construction: 1997, Technical details: pressure: 10 t workpiece diameter - max.: 50 mm threading length: 100 mm Psdjx Iu Ifepfx Abksgn max. rollable pitch: 3 mm rolling power: 100 kN workpiece diameter min/max: 117/175 mm revolution per minute: 0 - 150 U/min Weight approx.: 2550 t dimensions of machine: 1,25 x 1,38 x 2,15 m *

Condition: used, Year of construction: 1988, Technical details: pressure: 10 t workpiece diameter - max.: 40 mm threading length: 70-80 mm workpiece diameter min/max: 3 / 40 mm revolution per minute: 47-94 U/min feed speed: 0,5 - 6 mm/s work stroke: max. 7 mm total power requirement: 4,68 kW Weight approx.: 1,4 t dimensions of machine: 1,4 x 1,4 x 1,7 B T H m dimensions of hydaulic: 0,8 x 1,2 m Hydraulic drive manual and automatic cycle adjustable roller speed max. thread diameter 40mm min. thread diameter 3mm up to 3.5 mm pitch max. pitch 1.75mm roller width min. 80 mm max. 120mm shaft speed 47-94 roller shaft diameter 40 various rollers as accessories Pjdsw D Aq Tspfx Abkegn *

Condition: used, Year of construction: 1998, thread M5 - M75 thread length at plunge operation 150 max. mm thread length at continiuous operation 2000 max. mm spindle turning speed range 25 - 100 U/min Podpfey Nd Scex Abkjgn contact pressure capacity 500 - 25000 kp feed stepless 0,5 - 6 mm/s roll distance min/max 135/200 mm stroke adjustable from - to 0 - 30 mm taper length of the roll spindles 200 mm rest period infinitely variable 0,15 - 60 sec time control 0,15 - 60 sec weight 3,5 t dimensions of the machine ca. 2 x 1,5 x 1,6 m Machine has many rolls.

Condition: used, LEISTRITZ RR 120 BHF is a Thread rolling machine of precision, delivering high accuracy and reliable operation. Capacities: threaded Ø 2–50 mm; pitch 0.35–3 mm; max infeed 85 mm; max stroke 125 mm; min roll die Ø 120 mm; roll width 90 mm; roll axis swivel 8°. Specs: roll speeds 30–150 t/min (stepless); roller pressure infinitely adjustable 12 to; voltage 50 Hz 3x400 V; motor power 7.5 kW; connection power 8 kW; weight ≈2000 kg; dims L1440×W1260×H1805 mm. Achieves tight tolerances; applications: automotive, watchmaking, machine tools, aerospace, medical. Pgedpfxey S Ddqj Abkjn

Condition: refurbished (used), Currently undergoing rebuilt, it is possible to customize it. Ingramatic RP1 Fixed die length: 85 mm. Moving die length: 95 mm. Die thickness: 25 mm. Die height: 65 mm. Thread diameter: M2 ÷ M6 Shank length: 100 mm. Thread length: 62.5 mm. Psdpfx Abezcd Hfskegn Speed Range up to: 600 pcs./min.

Condition: good (used), Thread rolling machine (hydraulic) for sale. Suitable for manufacturing threads on bolts, screws, and rods. Robust industrial design. Machine comes from ongoing operation / warehouse clearance. Condition: used. Inspection possible. Loading can be arranged. Ideal for metalworking, screw production, industrial applications. Psdpfx Abjy Ez N Dekjgn

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Diameter of rolling spindles: 69.85mm Pjdpfoxl Ebhjx Abkjgn Max thread die diameter:210mm Variable spindle speeds: 20 -90 rpm

Condition: like new (used), Ingramatic RP1 Pgedeza Uw Ajpfx Abksn Fixed die length: 85 mm. Moving die length: 95 mm. Die thickness: 25 mm. Die height: 65 mm. Thread diameter: M2 ÷ M6 Shank length: 100 mm. Thread length: 62.5 mm. Speed Range up to: 600 pcs./min.