Used Internal thread cutting machines thread up to M 8 for sale
3
Thread cutter, tapping machine, tapping machine
-Integrated reversing gear: with fast reverse
Qliz3oq0i
-Nominal consumption: 230 watts
-Max. Cutting capacity: M6
-Connection: 230 volts
-Weight: 2.5 kg
4
thread capacity 6 mm
thread pitch 1,5 mm
throat 130 mm
thread bore capacity in steel 1,5 - 6 mm
thread bore capacity in brass 3 - 10 mm
spindle stroke ca. 40 mm
speeds 6, von 290-1240 U/min
table-size 200 x 160 mm
total power requirement 0,4 kW
Cit0uxl
weight of the machine ca. 120 kg
dimensions of the machine ca. 0,5 x 0,4 x 1,8 m
Electric 380 Volt
Machine base
Machine dealer with own stock of 2500 m².
5
weight of the machine ca. 0,25 t
tapping bell
Eqcd0gd
2 bells
10
thread dia. M2 - M10 mm
Ckoto3s0
Tools speed U/min
table-size 485 x 350 mm
throat 200 mm
voltage 380 V
threading length mm
total power requirement kW
weight of the machine ca. 0,28 t
dimensions of the machine ca. 1,2 x 0,7 x 1,75 m
4
thread cutting performance in steel 1 up to 6 mm
outreach 125 mm
B9jpi8wwx9
electrical data 380 V
space requirements depth - 550 x height - 650 x width - 400
mm
weight approx. 56 kg
10
Drilling capacity: up to 10 mm
Spindle mount: drill chuck
Speed range:
Diameter pulleys
Motor side:
Spindle side:
38; 48; 66; 78 mm
90; 104; 120; 133 mm
Motor speed: 800 rpm
stroke: 100 mm
throat: 300 mm
table: 400 x 400 mm
distance table - drill chuck max: 580 mm
distance table - drill chuck min: 130 mm
table: 400 x 400 mm
footprint: 750 x 480 mm
total power: 0,4 kW
accessories/equipment: drill chuck
Condition: good
weight: 170 kg
Hlgzhzuh
dimensions: 750 x 480 x 1.450 mm
4
Thread cutter, tapping machine, tapping machine
Qlizs7lgh
-Integrated reversing gear: with fast reverse
-Nominal consumption: 280 watts
-Max. Cutting capacity: M8
-Connection: 230 volts
-Weight: 2.5 kg
5
thread capacity 8 mm
throat 200 mm
thread pitch mm
thread dia. 8 mm
threading length 50 mm
B78wbss2vt
motor speed 1400-2000-2800 U/min
min. dia. M 2
total power requirement 0,45 kW
weight of the machine ca. 50 t
dimensions of the machine ca. m
range L-W-H 400 x 230 x 960 mm
We sell this machine with a small special price but not tested.
Machine dealer with own stock of 2500 m².
4
Hydraulic thread cutting machine
Make: CMA
Model: RH 24D Plus
Condition: New machine
standard-standard equipped with:
Bmc3zgeo
- digital speed display
- digital depth setting
- Clamping table 800 x 600 mm (T-slot: 19mm)
- Quick change recording
- Cooling agent device
- Operating instructions
7
thread dia. M3 - M8 mm
Bh73yrsbzl
TapOne 1212 thread cutting machine
CoastOne Oy - Made in Finland
Thread diameter: M2-M8
Thread / min: (M4, 20mm distance) 60
Number of stations: 3
Including lowering function
Controlled tool change
X-axis 1250 mm
Y-axis 1250 mm
Z-axis 80 mm
X-axis speed 1000 mm / s
Y-axis speed 1000 mm / s
Z-axis speed 300 mm / s
Spindle axis U 0… 2000 rpm
Thread cutting principle CNC (U, Z, interpol.)
Positioning accuracy +/- 0.1 mm
Forming / cutting tap
Quick-release chuck DIN standard
Pre-hole detection Yes
...
3
Articulated arm drilling and tapping machine make KÜHNE GEFIX type P team machine
Hmrgkgj
year of manufacture 1989
Technical data:
Thread sizes M 0,8 - M 6
torque range adjustable 0,1 - 2,5 Nm
Speed infinitely variable 1000 - 3000 rpm.
Spindle stroke 85 mm
Drive Syncron servo motor
power supply 220 V / 50 Hz
with
- universal joint arm Gefix type P
- micro spraying device
- Cast iron straightening plate 1000 x 1200 x 120 / 60 mm
- underframe
used, in very good condition
4
Taps, tapping machine, tapping machine
Ckfqkzkm
-Version: Integrated reversing gear with quick return
-Nominal: 280 watts
-max cutting performance: M8
-Connection: 230 volts
-Weight: 2.5 kg
1
Pneumatic threading machine up to M8
Speed: 700 revolutions/ minute
Thread: M2-M8
Working radius max: 1900mm
Working radius min: 200mm
Quick change insert size: TCS 1B
Compressed air motor/ spindle
Parallel articulated arm
Compressed air/ maintenance unit
6 safety slip clutches included
Mounting column with flange
Dxytfu
Table threading machine
M1 - M10
Height adjustment via toothed rack and hand crank,
motor 0,22+032 kW
motor rpm 1420/ 2770
spindle Upm 480 - 580
Weight 100 kg
Tapping chuck with key
Under table
Connection cable with 16 A CEE plug
Bkwy9ex
5
thread dia. M3 - M12 mm
400 U/min.
28 Nm
air pressure 6 - 8 bar
working area 150 - 1900 mm
weight of the machine ca. 12 kg
Ju92lq
Pneumatic Tapping Machines for M3 - M12 thread, angle adjustable.
6 pcs. Keyless chuck with clutch.
optional:
Working table with T-slots: 750x600x650mm 990x700x800mm or.
Magnetic base.
Available up to max. M16, M22 and M33.
TapOne 1212 thread cutting machine
CoastOne Oy - Made in Finland
Thread diameter: M2-M8
Thread / min: (M4, 20mm distance) 60
Number of stations: 3
Including lowering function
Controlled tool change
X-axis 1250 mm
Y-axis 1250 mm
Z-axis 80 mm
X-axis speed 1000 mm / s
Y-axis speed 1000 mm / s
Z-axis speed 300 mm / s
Spindle axis U 0… 2000 rpm
Thread cutting principle CNC (U, Z, interpol.)
Positioning accuracy +/- 0.1 mm
Forming / cutting tap
Quick-release chuck DIN standard
Pre-hole detection Yes
...
2
Air Tapping Machine /Pneumatic tapping machine
For Tap M2-M8
Speed (rpm) 700
Work Range Rmax 950 mm Rmin 100 mm
Weight 16 kG
Bwwvydis
Standard Accessories
- Pneumatic tapping Spindle
- Stretch arm
- Slanted arm
- Table mounting column
- Air unit
- Choose any six safety clutch tapping adapters
- 90° and Various Degree Tapping Device
4
Thread cutter, tapping machine, tapping machine
Qlizjmfsg
-Integrated reversing gear: with fast reverse
-Nominal consumption: 230 watts
-Max. Cutting capacity: M6
-Connection: 230 volts
-Weight: 2.5 kg
1
Pneumatic threading machine up to M8
Speed: 700 revolutions/ minute
Bsz7feh7e3
Thread: M2-M8
Working radius max: 950mm
Working radius min: 100mm
Quick change insert size: TCS 1B
Compressed air motor/ spindle
Parallel articulated arm
Compressed air/ maintenance unit
6 safety slip clutches included
Mounting column with flange
4
2-fold internal thread in-line drill Fabr. WMW Type MFIV 4
Built in 1988
Technical data:
Thread cutting performance in steel M 4
in cast M 4
in brass and light metals M 6
max. thread cutting length
Through holes 18 mm
Sack holes 24 mm
Main spindle stroke max. 32 mm
Spindle extension 147.5 mm
max. distance spindle / table 270 mm
Bfjjbsdw9y
max. spindle stick adjustment 180 mm
Table clamping area 225 x 290 mm
6 spindle speeds 500 - 2800 rpm.
10 mechanical main spindle feeds
or thread pitch 0...
1
Pneumatic tapping machines with parallel arm models LCN and RN quality pneumatic motor
Ball-bearing wear-free parallel arm reach 1800 mm
Air supply unit with
-Pressure reducer
-Water separator
-Engine lubrication
Mikrospruehsystem for tool lubrication on RN models including
Flange for mounting on the table
Quick change holder for taps
Ba3xd8upxh
RNR 20 models are equipped with gear
M-models are available with multi function head
equipped
Further technical data see pdf. Document
Multitapper 1212 automatic threading machine
CoastOne - Made in Finland
New machine
Working area: 1250x1250mm
Thread sizes: M2-M10
Number of spindles: 3 (optional 4)
2x thread cutting; 1x countersink drilling station
Micro lubrication for every spindle / tool station
Control: TC15 touchscreen
N2mrz
Numerical entry, import of punches - NC files
1
Air Tapping Machine /Pneumatic tapping machine
For Tap M2-M8
Speed (rpm) 700
Work Range Rmax 950 mm Rmin 100 mm
Weight 16 kG
Standard Accessories
- Pneumatic tapping Spindle
- Stretch arm
23cw7kw03
- Slanted arm
- Table mounting column
- Air unit
- Choose any six safety clutch tapping adapters
3
Thread cutter, tapping machine, tapping machine
-Integrated reversing gear: with fast reverse
Y2pxddhh
-pneumatic: driven
-Max. Cutting capacity: M6
-Weight: 3.5 kg
7
- Horizontal threading machine -second hand-
- with 2off CHIRON threading units 751-1
Gyh2i0
- center hight app. 135mm
- distance between chucks app. 450mm
- electrical power each unit 0,25kW
- spindle speed of motor: 820rpm
- max. threading capacity: M6
5
Thread up to M 3.5
Throat 60mm
Spindle stroke max 65mm
Thread length max 24mm
Table size 150x130mm
MARCELS MASCHINEN CH
D8fpdqh
6
Tapping capacity 6 mm
Tapping capacity in steel 1,5 - 6 mm
Tapping capacity in brass 3 - 10 mm
Spindle stroke approx. 40 mm
Speed 6, from 290 to 1240 rpm
Table dimensions 200 x 160 mm
Total power requirement 0,4 kW
Weight of the machine approx. 120 kg
B70jezgai0
Space requirement approx. 0.5 x 0.4 x 1.8 m
Electrical system 380 Volt
Machine base
4
Thread cutter, tapping machine, tapping machine
-Integrated reversing gear with fast reverse
Wjyghqbk9
-Nominal consumption: 230 watts
-Max. Cutting capacity: M6
-Connection: 230 volts
-Weight: 2.3 kg
4
Thread cutter, tapping machine, tapping machine
-Nominal consumption: 280 watts
Noayn
-Max. Cutting capacity: M8
-Connection: 220 volts
-Dimensions: 290/200/H60 mm
-Weight: 2.1 kg
5
Thread cutter, tapping machine, tapping machine
-Manufacturer: Fein, tapping machine type ASsld 636
-Rated consumption: 180 watts
-Max. Cutting capacity: M6
-Speed: 450 rpm
-Connection: 220 volts
-Dimensions: 400/100/H80 mm
-Weight: 3kg
Fn8n27h
5
Thread cutter, tapping machine, tapping machine
-Manufacturer: Fein, tapping machine type ASg 648
Mxbvek
-Rated consumption: 500 watts
-Max. Cutting capacity: M10
-Connection: 220 volts
-Dimensions: 500/240/H80 mm
-Weight: 4.4 kg
8
Thread cutter, tapping machine, tapping machine
-Manufacturer: Fein, tapping machine type ASg 636
-Rated consumption: 280 watts
-Max. Cutting capacity: M8
I3chmob
-Speed: 450 rpm
-Connection: 220 volts
-Number: 2x tapping machine available
-Price per piece
-Dimensions: 330/150/H80 mm
-Weight: 2.3 kg
Used Internal thread cutting machines thread up to M 8
Search Machineseeker now with more than 200,000 used machines:This may be of interest to you
Sell now on Machineseeker! Over 250,000 inquiries per month
10 valuable tricks for buying used machines online
Photo gallery: The World's 10 biggest excavators
Olympic Games: Machineseeker sponsors Team Germany
Sample sales contract for used machines in nine languages
How to receive 100% of our e-mails
