Used Rolling Machine for sale (68,466)

Condition: used, Thread rolling machine UPWS 25. Iijdpfezd Rf Nex Aa Ioc

Condition: new, functionality: fully functional, Year of construction: 2026, control type: PLC-controlled, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Siemens, controller model: PLC, number of rollers: 4, roller (bottom) diameter: 190 mm, roller (top) diameter: 210 mm, side roll diameter: 170 mm, roller diameter: 210 mm, roller length: 2,050 mm, working width: 2,000 mm, roller height adjustment: 700 mm, working height: 700 mm, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 5 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 15 mm, overall weight: 5,000 kg, total length: 4,600 mm, total width: 1,400 mm, total height: 1,700 mm, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, number of digital displays: 1, warranty duration: 24 months, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, W12-8X2000 Four-roller Plate Rolling Machine This machine is equipped with plate end pre-bending and CNC rolling functions. It allows the metal plate to be fed in one single pass, completing pre-bending and roll forming of the workpiece without the need for turning over the plate. The upper working roller serves as the main drive roller, while the lower roller and two side rollers are hydraulically driven. Their lifting strokes are controlled by the CNC system, enabling automatic leveling with a synchronous display accuracy of ±0.1 mm. The tilting and resetting of the tilting bearing housing adopts a hydraulic transmission structure, and the upper roller is equipped with a balancing mechanism to facilitate the removal of the finished workpiece. The machine comes with a movable independent control console for flexible repositioning at any time, and is equipped with safety interlock devices to ensure safe and reliable operation. Iisdoy Ugtaepfx Aa Iec Working Roll Material The working rolls are made of 42CrMo high-strength premium alloy steel, manufactured through forging, rough machining, and quenching & tempering heat treatment, achieving a bulk hardness of HB 240–300. After finish machining, they undergo medium-frequency induction hardening, resulting in a surface hardness of HRC 47–58. The products comply with the JB/ZG4289-86 standard for roll steel, ensuring uniform roll rigidity with a controlled deflection of (1/700–1/1000)L. Note: L refers to the center distance between the two side frames. The entire production process strictly follows the standard manufacturing flow for rolls, fully guaranteeing the comprehensive mechanical properties of the working rolls. Working Roll Rotation & Drive System The upper roll is the driving roll of the four-roller rolling machine. It is fitted with an independent hydraulic motor directly coupled to the heavy-duty gear housing, with no intermediate gear transmission. This is the most energy-efficient drive design. The hydraulic motor is equipped with an instant braking device, enabling accurate positioning of the roll shaft during pre-bending operations. Double-row spherical roller bearing Excellent Self-aligning Performance The outer ring adopts a spherical structure, allowing the inner ring and roller assembly to deflect within an angle of 1.5°~3°. It can automatically compensate for misalignment caused by installation errors and shaft deflection, preventing seizure and abnormal wear. Heavy Load & Impact Resistance Line contact between rollers and raceways enables the bearing to withstand extremely high radial loads as well as bidirectional axial loads, perfectly suited for heavy-duty working conditions of rolling machine rolls. High Durability Made of high-strength bearing steel with quenching and other heat treatments. Combined with a well-designed lubrication system, it ensures long-term stable operation under harsh conditions and greatly reduces downtime for maintenance.

Condition: good (used), functionality: fully functional, Year of construction: 2012, MG SRL MH 316 C 4 Roll Plate Rolling Machine- Year 2012. Iisdpfjzc Rkwex Aa Isc 4-roll plate bending machine. 3000 mm up to 16 mm. Upper roll diameter 340 mm. Lower and lateral rolls 310 mm.

Condition: used, functionality: fully functional, Year of construction: 2013, MG SRL AR 140 Profile Bending Ring Rollers- Year 2013. Specifications Shaft Ø140 mm Number of rolls 3 Resistance moment 130 CM³ Iiedszc N Rcopfx Aa Isc Capacity flat 220 x 50 x R=2000 mm Horizontal and vertical Yes, Horizontal + Vertical . Stroke X-Axis 400 mm Capacity Tube 180 x 4 x R=4000 Ø x mm Capacity bar 80 x 80 x R=1000 mm Capacity HEA-Profile 180 x R=1800 mm. Dimensions Length 2100 mm Width 1900 mm Height 2100 mm Weight 6500 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Equipment: documentation/manual, ORT Italia Netting Machine CE certified Type RP 18/U Year 2012 Siemens SIMATIC OP17 CNC control panel Reference: F24 Iodpfxszb Imaj Aa Isic

Condition: used, sheet width 1050 mm plate thickness 2,5 bei 400N/mm² mm roll diameter 90 mm Weight ca. 490 kg Iiodpszfayfefx Aa Isc Motorised three-roll round bending machine in an asymmetrical configuration. Upper roll swivels forwards Bending roll adjustment via handwheel; suitable for conical bending Emergency stop cord The machine comes from a training workshop and is in very good condition

Condition: good (used), Year of construction: 2002, functionality: fully functional, Pressing force: 10 t Workpiece diameter - max.: 2-50 mm Control system: SIEMENS SIMATIC Total power consumption: 12 kW Machine weight (approx.): 2.5 t Iijdpfjzd Dibox Aa Ioc Dimensions L x W x H: 1300 x 1500 x 1600 mm Roller stroke: 80 mm Smallest/largest center distance between roller spindles: 117/197 mm Roller spindle height above machine bed: 160 mm Max. tool diameter: 175 mm Roller spindle mounting diameter: 54 mm Roller spindle mounting length: 75 mm Swiveling angle of roller spindle: -/+ 10 degrees Roller spindle speed (variable): 10-100 rpm Motor for roller spindle drive: 7.5 kW Accessories: several thread rolling tool sets

Condition: good (used), Year of construction: 2008, sheet width 2050 mm plate thickness 20.0 mm ST pre-bending 16.0 mm ST diameter of upper rolls ca. 270 mm side roll diameter ca. 240 mm diameter of lower rolls ca. 250 mm Number of working hours ca. 7.800 h Control "EASY PRO" oil volume ca. 200 Liter voltage 380 V total power requirement 13.5 kW weight ca. 9.000 kg Dimensions (only the machine) 4000 x 2080 x 1800 mm Good condition (!!) Current list price approx. 150.000 euros Special price available upon request Features: - Robust electro-hydraulic 4-roll round bending machine * Arc-shaped feed of the side rollers (swing arm technology) - 4-roller design offers a wide range of bending and rounding options * Rolling process completed in a single pass - Mobile control unit * DAVI "DAVI EASY PRO" numerical control * Manual or automatic operation selectable * Programming "Self-Learning" mode available * Control of all rollers and machine axes * Digital position display for the rollers - Curved feed of the side rollers (DAVI "PSG" guide system) * Tight bending radii of up to 1.1 times the upper roller diameter possible * Instead of the usual 1.5 times with linear guides * Optimal bending = short sheet ends during bending - Conical rolling possible via roller tilt * Tight diameters possible due to low machine frame - Electronic roller parallelism - Stepless speed adjustment (max. 5.0 m/min) - Bending on both sides - Forged and hardened rollers with a hardness of 53-55 HRC - Low-maintenance, robust machine design - Easy sheet removal thanks to low machine frame - Sturdy welded steel construction - Electro-hydraulic swivel bearing for easy tube removal - Operating instructions Iiodpfx Aaszc Rv To Ijc

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 20830013 - Drive system: Teach-in - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 2 - Power [kW]: 11.0 - Max. sheet thickness [mm]: 16 - Max. working width [mm]: 2000 - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Iijdpfxoxdigfs Aa Ijc Lukas van Rossum

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m Iodpfx Aozd Hhaja Ieic

Condition: used, Year of construction: 2011, Control Siemens Sinumerik 840D sl centre height 1.150 mm z-axis 1.559 / 307 mm x-axis 16 - 80 mm Swing circle diameter 92 mm roll spindle turning speed range 0 - 3.000 U/min Rolling mill roll clearance - axial 0,025 mm feed speeds infinitely variable 0 - 30.000 mm/min rapid traverse 30.000 mm/min Swivel angle range ±3,2 ° Max. speed - main spindle 375 U/min piston stroke 400 mm diameter of piston 90 mm with effective piston area 63,6 cm² In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, as well as the tools and clamping devices shown in the images, are included in the scope of delivery only if explicitly noted in the additional information. Subject to changes, errors in technical data and specifications, and prior sale! Ijdezdk Ikepfx Aa Ioic

Condition: used, Technical data paper roll cutting machine. This machine can only be used for small residual rolls up to a maximum diameter of 400 mm in order to automatically unwind these residual rolls and cut the paper into strips so that it can be better pressed into bales. Manufacturer unknown Type unknown Year of manufacture unknown Dimensions feed table for rolls: Width inside of rolls 2.195 mm Height inside of castors 465 mm Transport dimensions Feed table over all: Iedpfxeu Tg Sps Aa Ioic 2,650 x 1,300 x 2,150 mm (W x H x D) Dimensions roller cutter: Width cutting shaft inside 2.250 mm Transport dimensions of the roll slitter over all: 3,050 x 1,550 x 550 mm (W x H x D) Remarks: There are no further data or documents available. A viewing is possible by appointment. We assume no liability for the technical data and possible errors.

Condition: good (used), Year of construction: 2019, 1 used horizontal reciprocating roller grinding machine Manufacturer: Granlund Type: 650 XB Year of manufacture: 2019 Operating hours: 2905 Control: Fanuc Series 31i - B Technical data Max. workpiece length (mm): 300 Outer diameter of ring grooves (mm): 120-650 Grinding wheel diameter (mm): 356 Grinding wheel thickness (mm): 75 Tailstock quill stroke (mm): 45 Equipment: automatic grinding wheel dressing device, 2 x tailstock, paper band filter system, Iijdpfxsy Nxd Te Aa Ijc oil mist extraction, control cabinet with cooler, grinding wheel balancing stand Dimensions: 3800 x 2800 x 2200 mm Weight: 4500 kg Technical features It is possible to perform deep grinding on soft workpieces. This means that no pre-milled blank parts need to be manufactured or purchased, as the machine performs the entire process. The machine is equipped with an automatic grinding wheel dressing cycle, including automatic compensation for wheel diameter and cutting speed.

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Iedpfxjyurx Te Aa Ijic Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: used, Roll guiding device WITELS-ALBERT Berlin, type ER 7 Iiedpfezczvdex Aa Ijc Guiding roller width: 30 mm Guiding roller diameter: 30 mm Belt cross-section: approx. 1.5 x 10 mm or 0.5 x 25 mm - Individual adjustment for the 3 upper guiding rollers via wing nut and lock nut - Quick-release mechanism via eccentric lever for the 4 lower guiding rollers - 2 pre-forming guiding rollers, Ø 32 x 13 mm, mounted with a 90° offset - For guiding strip steel, last used for a belt cross-section of approx. 1.5 x 10 mm Space required L x W x H: 250 x 100 x 150 mm Weight: 5 kg Good condition

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, roller (top) diameter: 130 mm, side roll diameter: 110 mm, working width: 1,030 mm, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 6 mm, power: 2.2 kW (2.99 HP), number of digital displays: 3, Equipment: emergency stop, foot remote control, 4-Roll Round Bending Machine Manufacturer: Sahinler, Type: 4RM 10-130 HRC Year of Manufacture: 2008 Technical Data Manufacturer: Sahinler Type: 4RM 10-130 HRC Year of Manufacture: 2008 Usable Length: 1030 mm Top Roll Diameter: 130 mm Side Roll Diameter: 110 mm Sheet Thickness (without pre-bending): 6 mm Sheet Thickness (with pre-bending): 5 mm Total Power: 2.2 kW Dimensions: 2.4 x 1 x 1 m Weight: approx. 1.5 t Equipment • Hardened rolls • Digital display for roll positioning Isdpfxszcpu Uj Aa Isic All information without guarantee.

Condition: good (used), functionality: fully functional, input voltage: 400 V, type of input current: three-phase, overall weight: 700 kg, year of last overhaul: 2023, Head machine Fortuna KM 5 Head machine Fortuna, Model: KM 5 VATW, 5-row Iiodpfx Aezbz E Nea Isc Weight range approx.: from 30 to 80 grams Dough dividing and rounding machine with spreading belt Connection: 400V, 16A-CEE plug Used machine

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Iijdpfjx Sr Dfox Aa Iec Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: good (used), functionality: fully functional, input voltage: 400 V, working width: 320 mm, total width: 2,300 mm, total length: 750 mm, total height: 1,370 mm, DGUV certified until: 07/2027, type of input current: three-phase, Lippelt Mini Rustica roll production line for all types of specialty rolls stainless steel design simple and efficient production of square dough pieces machine is mobile connection: 400V, 16A-CEE plug dimensions approx.: L 2300 x W 750 x H 1370 mm used machine Optional: Rumo seed dispensing unit Iiodsyy Scqspfx Aa Isc maintenance contract delivery service training and commissioning We have many other machines in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, total width: 7,680 mm, total length: 1,490 mm, total height: 3,000 mm, type of input current: three-phase, Fortuna Premium K roll production line Iedpfx Aasyv Uwpe Ijic Fortuna combined roll production line Heading machine, dough divider and shaping machine Primus, 4-row, manufactured in 2019 with spreading belt, proofing cabinet with lateral discharge Transfer device Stainless steel design Connection: 400V, 16A CEE plug Dimensions approx.: 7680 x 1490 x 3000 mm (W x D x H) Used machine

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, DGUV certified until: 07/2027, type of input current: three-phase, overall weight: 1,000 kg, König Rex T5S Depositing Machine Depositing machine for dough portions and forming machine robust technology Iiodpfx Ajyaklija Ijc weight range approx. from 30 to 85 grams with discharge conveyor connection 400V, 16A-CEE plug used machine Visit our large bakery machine warehouse!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, total width: 1,740 mm, total length: 815 mm, total height: 1,650 mm, type of input current: three-phase, Roll forming line Lippelt Mini-Rustica GST Head machine for square specialty rolls Model: Mini-Rustica GST with guillotine and punching device including 2 longitudinal cutting rollers, 3 and 4 rows Band mehler for infeed belt Touchscreen control Stainless steel design Rumo seed station Machine is mobile Connection 400V, 16A CEE plug Dimensions: 1740 x 815 x 1650 mm, WxDxH Used machine Iiodpfoyv U Eaex Aa Ioc

Condition: new, Year of construction: 2026, number of rollers: 3, roller (bottom) diameter: 95 mm, roller (top) diameter: 95 mm, side roll diameter: 95 mm, roller length: 1,270 mm, sheet thickness steel (max.): 3 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity 1270 x 3 mm - Conical rolling - Swing-out top roll - Foot pedal operation - Brake motor - Emergency stop - Documentation - 400V Iodpfxexn Rrqe Aa Isic

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts etc Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm - Power of main motor: 7.5kw Isdpfxeyml Eks Aa Ijic Photographs taken before reconditioning

Condition: good (used), Year of construction: 1998, FOR SALE: ORT ITALIA RP 24 Thread Rolling Machine Iedpfx Aey Shd Ija Ieic Precision machine for thread forming, ideal for high-performance industrial production. Capacity & Technical Details Pressing force: 24 tonnes. Brand: ORT Italia. Model: RP 24. Year: 1998 Power supply: 380V / 20A. Equipment Automation: Integrated automatic loading. Control: Digital control panel. Ejection: Discharge chute included.