Thread rolling machine

Pee-Wee P24US

Condition: good (used), Year of construction: 1988, grinding length: 1,000 mm, grinding width: 550 mm, grinding height: 400 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Giedpfx Acju Rqynjwer Year of manufacture: 12-1988 Delivery time: immediately Electro-permanent magnetic clamping plate SAV 1000 X 400 mm Fine pole pitch 45-5 mm Electric straightening device with compensation Digital display vertical Holder with grinding wheel max. 400 X 100 X 127 mm Spindle motor 7.5 KW 1435 min/1 Setting wedges Coolant system with universal paper belt filter Complete documentation

Condition: used, Thread rolling machine ORT RP30U 2-roll 30 ton swiveling heads variable speed drive Gjdpjt H Ty Uefx Acwoir #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior Power (Ton): 30 Number of rollers: 2

Year of construction: 1987, condition: used, Kehren rotary table type RS 7C, second-hand manufacturer: Kehren, Honneff Comm.: 4179 year of construction: 1987 Control: Siemens 3G SPS: Siemens S5 grinding motor: BBC QUB 200 rotary table ø: 750 mm ø grinding head:460 mm Control panel with screen Coolant system Flushing pump Godpfehgmwgjx Acweir Coolant pump Automatic paper belt filter system Control cabinet

Condition: used, functionality: fully functional, Grinding length: 973 mm Center height: 250 mm Maximum worktable tilt: +6° / -9° Centering center: MT5 Maximum grinding head travel: 100 mm Maximum grinding head tilt: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centers: 400 kg Maximum internal grinding device grindable bore: 160 mm Gedpfswhp Dnsx Acwsir Machine weight: approx. 5,000 kg

Condition: good (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: C4655, grinding length: 5,000 mm, grinding width: 500 mm, Sanding length: 5000 mm Sanding width: 500 mm Workpiece height: 250 mm spindle diameter in front bearing: 190.5 mm pivotable 0.7° Max. Torque: 1771 Nm Max. speed: 593 min/-1 Gjdpfx Acoq U Ihvswsir Feed: infinitely variable 20-35,000 mm/min Trapezoidal segment head diameter 800 mm with Trapezsegmenten: 94/103x38x200mm Marposs measuring device Hydraulic upper part clamping and swiveling Sanding mist extraction system: Hydrocyclone cleaning system Machine weight approx. 27.6 tons Space requirement approx.: 11.2 x 4.3 x 3 m

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece. Giodpouz If Njfx Acwsr

Condition: good (used), Grindable, largest diameter: 200 mm Center distance: 450 mm Weight of the machine approx: Gijdpfolz Nxwex Acwjr 2, 2 t Machine dimensions:

Condition: reconditioned (used), functionality: fully functional, turning diameter over cross slide: 690 mm, spindle bore: 150 mm, turning diameter: 1,040 mm, turning diameter over top slide: 690 mm, center height: 500 mm, center width: 2,000 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 380 mm, bar passage: 55 mm, Center height: 500 mm Distance between centers: 2.000 mm Maximum turning diameter: Over cross slide: 690 mm Over bed: 1.040 mm Over gap: 1.070 mm Bed width (hardened guides): 670 mm Giedpfx Acsyhhuwewjr Gap length: 480 mm Gap length in front of the faceplate: 320 mm CARRIAGE Length of bed guideways: 1.020 mm Cross slide travel: 640 mm Compound slide travel: 360 mm SPINDLE Spindle nose: ASA 15’’ Spindle bore diameter: 150 mm Front bearing size (NN): 200 / 310 / 82 mm Rear bearing size (NNU): 190 / 260 / 69 mm Internal Morse taper reduction sleeve: No. 6 Number of spindle speeds: 24 Speed range: 4 ÷ 800 rpm THREADING Total number of threads: 398 Metric threads: 0.5 ÷ 224 mm Module threads: mod. 0.25 ÷ 11 Whitworth threads: 56 ÷ 1/8 TPI Diametral pitch threads: 112 ÷ 1/4 DP FEEDS Number of feeds: 108 Longitudinal, cross and compound feeds: 0.05 ÷ 22.4 mm/rev RAPID TRAVERSES Longitudinal, cross and compound: 2.500 mm/min Longitudinal return: 5.000 mm/min TAILSTOCK Quill diameter: 130 mm Quill Morse taper: No. 6 Quill travel: 420 mm STEADY RESTS Bed steady rest capacity: 140 ÷ 500 mm Carriage steady rest capacity: 40 ÷ 350 mm PERMISSIBLE LOAD Cantilever load: approx. 1.500 kg Between centers, without steady rest: approx. 5.000 kg Between centers, with steady rest: approx. 6.000 kg Machine weight: approx. 7.800 kg

Condition: used, Year of construction: 1992, grinding length 0800 mm grinding width 500 mm workpiece height 400 mm table-size 800 x 400 mm table speeds 1 - 25 m/min cross feed autom. 0 - 60 mm/Hub grinding wheel size 400 x 100 x 127 mm grinding spindle speed 1400/2800 U/min Gjdpfxowgnz Aj Acwjir total power requirement 10 kW voltage 380 V weight of the machine ca. 6 t Machine has cooling arrangement, auto. vert. feed, dressing arrangement and wheel flanges.

Condition: used, Year of construction: 2006, turning diameter Ø30/300mm mm Giedjugnxdspfx Acwer turning length 3055mm +/-0.3mm mm