Used spindle moulders / table mills for sale (159)

Condition: good (used), Year of construction: 1993, functionality: fully functional, Table milling machine TF900 - Year of manufacture: 1993 - 380 Volt - 3 speed settings - good condition Gjdpsygm D Uefx Aciokb Transport possible at additional cost! Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: used, Technical specifications: Spindle diameter: 35 mm Spindle height: 160 mm Spindle rotation: left/right Electric spindle height adjustment Tilting spindle Adjustable cross-slide arms Dust extraction port: 120 mm Motor power: 5.5 kW Power supply: 380 V Manufacturer: SAC Overall dimensions: Length: 1120 mm Width: 1070 mm Height: 1040 mm Gkedjzilp Hspfx Aciob

Condition: like new (used), Year of construction: 2019, functionality: fully functional, SCM TF130ps Undercut Spindle Moulder Spindle diameter: 40mm Longitudinal carriage in the worktable Total spindle length: 180mm Main motor power: 7kW Spindle speed change via belt drive: 3000/4500/6000/7000/10000 rpm Gsdpfezlw Rnox Aciokb Spindle rotation: left and right Manual spindle lifting Technical documentation Year of manufacture: 2019

Condition: excellent (used), Year of construction: 1994, power: 5.5 kW (7.48 HP), SPINDLE MOULDER GRIGGIO T270 WITH 2-POSITION TENONING SLIDING TABLE RIGHT-HAND SIDE EXTENSION ADJUSTABLE FRONT SUPPORT BAR ADJUSTABLE SPEED FEEDING DEVICE WITH 4 ROLLERS 40 MM DIAMETER SPINDLE WITH 270 MM USEFUL LENGTH Godpfjznnx Iox Aciokb 190 MM USEFUL DEPTH OF TABLE CUP MAXIMUM SIZES OF THE TOOL ALLOWED UNDER THE WORKING TABLE: 320 X 190 MM HANGING CONTROL PANEL WITH ELECTRONIC HEIGHT PROGRAMMER 8 SPINDLE HEIGHT SETTING POSITIONS LOCKING SPINDLE LEVER WORKING TABLE SIZE: 1850 X 730 MM MAXIMUM OPENING OF FRONT ADJUSTABLE SUPPORT BAR: 330 MM WORKING TABLE HEIGHT: 900 MM SPINDLE USEFUL LENGTH: 270 SPINDLE STROKE: 250 MM SPINDLE DIAMETER: 40 MM SPINDLE ROTATION SPEED: 3000-4500-6000-8000-10000 RPM TABLE RING DIAMETER: 115-170-220-270-350 MM MOTOR POWER: 7.5 HP 2-POSITION TENONING SLIDING TABLE – WORKING TABLE SIZE: 900X300 MM TILTING: -60° +60° STROKE: 1300 MM NET WEIGHT: 900 KG VERY GOOD CONDITION

Condition: good (used), Year of construction: 1966, Spindle moulder type 54F, year 1966, V-belt drive, reversible (left/right rotation), 4 spindle speeds, 30 mm spindle, 3 kW, transport dimensions 940 x 780 x 1200 mm, weight 480 kg. Transport available at extra cost! Gsdey E Nuhepfx Acijkb

Year of construction: 1978, condition: like new (used), 4 kW engine max. tool diameter 270 mm 30 mm spindle spindle up / down adjustment spindle locking interchangeable spindle table dimensions 91 cm x 102 cm cast iron table top Gjdpfx Acshh S Dujiskb height to the table plane 850 mm

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: AB00017920, functionality: fully functional, power: 7 kW (9.52 HP), input voltage: 400 V, spindle diameter: 30 mm, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,000 rpm, table width: 810 mm, table length: 2,500 mm, overall weight: 510 kg, height adjustment type: mechanical, milling spindle length: 180 mm, spindle stroke: 90 mm, working height: 923 mm, Equipment: motor brake, - Stable steel and grey cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation thanks to precision components and high own weight - Standard with reversible rotation and electronic interlock when changing direction - Five speeds from 3000 to 10000 rpm - Speed adjustment is simple and convenient from the machine side - Standard with MK 4 quick-change spindle system - Large worktable made of cast iron for lasting precision - Easy handling due to control elements and speed display on the machine front - Large dimension milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via handwheel Godpfx Aewwkqhsciekb - Numerical display of the set spindle height, precise to one-tenth - High-performance industrial motors

Year of construction: 1989, condition: like new (used), Spindle diameter 30 mm 5.5 kW engine power 5 speeds 3000/4500/6000/8000/10000 U / T 1989 Gjdpfxohi Tv Hj Aciskb Can be purchased without advance

Condition: good (used), Year of construction: 1991, Scheppach spindle moulder hf 3000 Year of manufacture 1991 Table size 615 x 450 mm Table height 870 mm Finely adjustable router stop Spindle diameter 30 mm Max. tool diameter 200 mm Speeds 3,000 / 6,000 / 9,000 rpm Motor 400 volts / 3.0 kW Right/left rotation Gedpewhiumofx Acijkb Extraction nozzle 100 mm Bracket for sliding carriage Chassis Various accessories

Condition: good (used), Year of construction: 2020, functionality: fully functional, 5.5 kW, -45/+45° tiltable, electric height and swivel adjustment Left/right, 6 speeds Gsdpfsykar Hjx Acijkb Aigner fence 2 x 500 mm, digital readout on the spindle fence, table 2500 mm x 780 mm, mechanically programmable spindle fence with two displays, system for quick removal from the worktable New price: €18,700 Available around September 2026 Shipping available at extra cost!

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° Gkjdpfx Aszgtyhociob C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Condition: used, completely shut down Gksdpfx Acozd Hdhjiob used good condition cleaned function tested partially refurbished Manufacturer: Flottjet GS-tested kW: 2.2 Number of spindles: 1 Spindle diameter mm: 30mm Maximum tool diameter in the machine mm: 125 Table size l x w mm: 650 Table extension approx. mm: 2 x 300 Milling fence with fine adjustment Space required approx. L x W x H mm: 1260x500x1100 Weight approx. kg: 110 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee and warranty.

Condition: good (used), Year of construction: 1988, Spindle moulder Manufacturer: Chambon Model: 323 C Year of manufacture: 1988 Godpfx Acsyia Tfsiokb Table size: 680 x 1,000 mm Motor power: 4 kW Spindle diameter: 30 mm Speeds: 3,000/4,500/6,000/8,000 rpm Max. tool diameter: 200 mm

Condition: reconditioned (used), Gomad wood lathe, type DNXA-40x100 A, after overhaul. For sale: Gomad DNXA wood lathe, Polish-made. Overhauled, with new electrical components and a one-year warranty. Turning diameter: approximately 42 cm. Bed length: 132 cm. Tailstock with rotating and eccentric locking. Two sizes of tool rests. Can be disassembled for transport; delivery is possible within approximately 100 km upon agreement. Three turning speeds adjustable by belt. M24 thread on the spindle, making it easy to attach chucks and faceplates. Excellent for learning woodturning. Suitable for both small and large bowls. Godezhn Shjpfx Aciekb

Condition: ready for operation (used), Year of construction: 1991, Hofmann TFS 1200 tilting table milling machine Year of manufacture: 1991 Machine no.: P127-91-194-695 Motor: 54.7 / 5.7 - 11 / 13.5 Tilting range: -5° to +45° Motor brake Motor: 2 speeds / pole-reversing Gkodpjzmcz Iefx Aciob 6 speed stages: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Right-hand and left-hand rotation Table size: 2000 x 830 mm Milling arbor diameter: 30 mm Milling fence with fine adjustment Height adjustment: manual, with handwheel Tilting adjustment: manual, with handwheel Lateral sliding table for slot and tenon machining Feed device: 3-roller Elu, infinitely adjustable Dust extraction connection: D 2 x 120 mm Space requirement: approx. 2000 x 1600 x 1400 mm Weight: approx. 1000 kg

Condition: used, Year of construction: 2012, power: 5.9 kW (8.02 HP), rotational speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! Gkedpfszf H R Rox Acisb The pick-up deadlines stipulated in the General Terms and Conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Speed: 9,000 rpm Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected power: 5.9 kW EQUIPMENT Number of milling units: 1 Tilting spindle The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and is responsible for the installation, securing, and use of the machine at the destination. External reference: 8579

Condition: used, Year of construction: 2013, power: 5.9 kW (8.02 HP), No minimum price – guaranteed sale to the highest bidder! Gjdpezf H Nysfx Aciokb The pick-up deadlines specified in the terms and conditions apply. The absolute latest pick-up date is August 31, 2026! TECHNICAL DETAILS Working spindle length: 100 mm MACHINE DETAILS Motor power: 5.9 kW Total connected load: 5.9 kW EQUIPMENT Tilting spindle Number of milling heads: 1 The machine is sold and delivered in its current and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents with a descriptive nature. The buyer has the right to inspect the goods before pick-up and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8578

Condition: used, Year of construction: 2010, tool diameter: 210 mm, No minimum price – guaranteed sale to the highest bidder! The pick-up deadlines specified in the general terms and conditions apply. The absolute latest pick-up deadline is August 31, 2026! TECHNICAL DETAILS Working spindle length: 125 mm Max. tool diameter: 210 mm MACHINE DETAILS Motor power: 5 kW EQUIPMENT Tilting spindle Milling unit: 1 Number of motors: 1 The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents, which are of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8577 Gksdpfjzf H Iisx Acieb

Condition: new, Main motor with 7.0 kW (S6) and automatic star-delta switching Reverse rotation direction with electrical interlock during switching Fixed milling fence with aluminum rulers (version with electrical safety devices) complete with extraction hood (max. tool diameter 240 mm) Interchangeable milling spindle Controls on the front side Electrically adjustable spindle height and tilt Electrical pre-wiring for power feed unit (CE version) with table extension: 2,500 x 1,200 mm (length/width of milling table, incl. extension and workpiece support) Operating hours counter Technical data: Power 7 kW Working table dimensions (extendable workpiece support) 2500 x 855 mm (1200 mm x 855 mm) Spindle diameter 30 mm Spindle tilt 0-45° Spindle clamping length 90 mm Tool diameter under table 240 mm Spindle base protrusion from table 38 mm Spindle speeds 3500/6000/8000/10,000 rpm Extraction port diameter 120/120 mm Gksdpfjxnqx Dex Acijb

Condition: new, Year of construction: 2025, machine/vehicle number: 6939, functionality: fully functional, Fimal Swing Spindle Moulder TX 160 "Partnership Edition" Fence including parallel adjustment with handwheel and digital readout, Handwheel adjustment with digital readout for front fence jaw, Electric travel swing mechanism for the complete fence, Quick-release lever for locking, Aluminium fence jaws and pressure device, curved fence, Electromotive spindle height adjustment, including digital display and decimal impulse setting, Table insert adjustable to the milling tool diameter (instead of table insert rings), Indicator lights for the selected spindle speed, Electrics and safety devices according to CE standards, Table dimensions: 2,500 x 780 mm, Spindle: diameter = 30 mm, height = 140 mm, Gsdsvlw Idjpfx Aciekb Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm, Max. tool size under table: diameter = 320 mm, height = 50 mm, Motor: 7.5 kW / 10 HP, 400 Volt, 50 Hz, Including automatic star-delta switch, Sound level according to EN 27960: 83.9 – 87.3 dB(A), Spindle tilt: -45° to +45°, Electromotive spindle tilt adjustment including electronic readout and decimal impulse setting, "Partnership Edition" complete with: "L" version with bilateral table extension and pull-out workpiece support with EMERGENCY STOP button, Upper control panel including electronic display, Swiveling mounting plate for feed device, mounted on the vertical column of the upper control panel, Socket for feed device, Forward/reverse rotation in accordance with CE standards, Prepared for installation of AIGNER integral fence jaws, Available ex-location Seevetal, without pre-carriage, freight, or commissioning, As inspected, subject to prior sale.

Year of construction: 1989, condition: excellent (used), 4kW motor Spindle fi 50 Gkjdpfsiu Awuox Acisb

Year of construction: 1985, condition: excellent (used), Table: 1100X900mm, 4 speeds: 3000, 5000, 6000, 10000 rpm, Spindle fi 50 5.5 kW motor 3 roll feed, Gkedpfxsiu Awxs Aciob Possibility to sell without feed at a lower price

Year of construction: 2018, condition: like new (used), Maximum milling height, mm 120 Maximum diameter of cutters, mm 250 Vertical stroke of the spindle, mm 120 Gjdjhlhgzepfx Acijkb Shaft rotation frequency 6000, 8000, 10000 rpm

Condition: refurbished (used), Year of construction: 2025, Dear customers, we are currently offering, upon request/order, a refurbished table router, type FZ0 by F. Zimmermann. Here are the machine's technical specifications: Worktable: 590 x 420 mm Rotary movement: 360° Tilting: 2x90° Spindle power: 0.25 kW Speed: 22,000 rpm Tool holder: collet chuck with clamping nut Ø 8 mm - CE marking - Vernier stop - Plexiglas milling guard - Original base cabinet (optional) Dimensions: 1,100 x 1,180 x 1,760 mm Weight: 120 kg The machine has been repainted in RAL 7035 light grey, drives have been cleaned, inspected, and equipped with a new belt. With the machine, you will also receive an angle table and a set of milling tools – in other words, a complete setup! Gsdsxlzg Hjpfx Aciskb VAT is itemized separately on the invoice. Shipping available at an additional charge. Current delivery time: 6 weeks If you have any questions, please feel free to contact us!

Condition: as good as new (ex-display), Year of construction: 2023, Spindle swivels: Yes, -45 to 45° Height adjustment: Electric Swivel adjustment: Electric Stop adjustment: Manual Height display: Digital Swivel angle display: Digital Milling stop display: Mechanical counter Spindle diameter: 30 mm Speeds: 3000, 4500, 6000, 8000, 10000 RPM Power consumption: 7 kW Motor brake: Yes, automatic Dust extraction connection: 1 x 120 mm, 2 x 80 mm Machine length: 2500 mm Machine width: 1250 mm Weight: 510 kg Gkjdpfx Asgr Ufpecieb