Table mill

GRIGGIO T270

Condition: new, The unit is new, complete including controls, diesel tank, exhaust and batteries. Godpfomgbayox Aciokb Description Model: NWR55 Ricardo Motor Newpower Generator Generator set Maximum power: 40kW / 50 kVA Engine : Kofo RIcardo N4100ZDS-42, 4 cylinder water-cooled Connection: circuit breaker Frequency : 50 Hz. Voltage: 400/230 V including mechanical speed control, AVR, battery charger, galvanized soundproofing, cooling water heater, Control unit: Comap AMF8, mains feed Dimensions: 2280x1030x1260 mm Weight: approx. 1020kg Diesel tank: 118 L. At 100% load: 8.5 L/h At 75% load : 6.5 L/h At 50% load : 4.4 L/h Network monitoring, network feed-in, soundproofed Ready for immediate use. additional costs 63A automatic switch: € 500 100A automatic switch: € 620 Shipment: - Worldwide transport including unloading is possible for an extra charge - In order to be able to quote an exact freight price, please send us a request with your data and your complete address

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % Gsdsr Iyvbopfx Acijkb - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % - triple brick offset 25 %

Condition: used, Year of construction: 1992, with Centrofix cutterhead Machine cleaned, fully inspected Tables measured – adjusted very precisely, max deviation 0.05 mm Test planing carried out Used, good condition, low hours Manufacturer: Maka Type: AH 430 Year of manufacture: 1992 Machine no.: 9201531 GS wood dust tested Motor: 3.0 kW Control panel on top Planing width approx. 430 mm Infeed table length approx. 1500 mm Outfeed table length approx. 1200 mm Swing guard Slotted/low-noise table lips Number of knives: 4 Centrofix cutterblock Table adjustment via handwheel automatic brake Extraction connection D 140 mm Gksdpfxoxuv Rrs Acieb Space requirement approx. 2700 mm x 1200 mm x 1400 mm Weight approx. 800 kg Storage location: 97447 Gerolzhofen, loaded free of charge, unpackaged Handover in as-inspected condition, without any warranty or guarantee.

Condition: used, Year of construction: 2001, total length: 2,680 mm, total width: 1,200 mm, total height: 2,200 mm, Colour: Grey Gedpfjwl I E Esx Aciekb Empty weight: 950 kg Price: On request Table milling machine Hofmann TFS 1200 Serial no. 127-01204 Year of construction 2001 7.8kW, 16amp, 400V 45 degree tilt adjustable. Aigner guide Feeder - Year: 2001 - Documentation available: No - CE certificate present: No - Serial number: 127-01204 - Main motor power [kW]: 7.8 - Spindle diameter [mm]: 40 - Table length [mm]: 2680 - Table width [mm]: 450 - Tiltable spindle: Automatic - └ Min. tiltability [°]: 0 - └ Max. tiltability [°]: 45 - Feeding device present: Yes - Brand: Masterwood - Type: Euromeo - Number of wheels [pcs]: 4 - Number of speeds: 2 - Guide present: Yes - Brand: Aigner - Min. spindle speed [rpm]: 3000 - Spindle speed control: Incremental - Transport dimensions: 2680mm x 1200mm x 2200mm (l x w x h) - Transport weight [kg]: 950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: good (used), Year of construction: 2017, - Milling spindle swivel range: 90 degrees / 45 degrees Gedpfx Aey Tm Rpociokb - Spare milling spindle: included

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested Gkodpeyi Efcefx Acieb

Condition: used, Year of construction: 1997, incl. 3-roller feed motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/s, height-adjustable grinding table, table size: 1000 x 350 mm, continuously adjustable pivoting grinding unit from 0 - 45°, angle scale and mechanical lock, fold-up veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central dust extraction connection: 140 mm diameter, sanding belt: 3000 x 150 mm. Location: Nattheim Gjdpfx Asy Dd Igeciskb

Year of construction: 1994, condition: ready for operation (used), There are two Spindle Moulder Casadei available. (1) Casadei FM5L, max. milling height: 100mm, motor power: 6kW, length: 2540mm, width: 1195mm, height: 1500mm, weight: approx. 950kg, year of construction: 1992, with table extension. (2) Casadei FM5C, motor power: 6.8kW, year of construction: 1994, with trolley. On-site inspection is possible. Gkjdpfx Aourwy Nocieb

Year of construction: 2014, condition: ready for operation (used), A mobile extraction and filter unit Höcker is available. Filter class: H3, motor power: 4kW, suction connection: 200mm, filter surface area: approx. 12m², max. volume flow: 3400m³/h, max. negative pressure: 2700Pa, collection container volume: 350l, machine dimensions X/Y/Z: approx. 2000mm/1100mm/2000mm, weight: approx. 420kg. On site inspection is possible. Gkedpfx Acsyg Nu Nsiob

Condition: excellent (used), Year of construction: 1995, WITH SLIDING TABLE AND FEED DEVICE Gksdpfowcq Idjx Aciob TABLE SIZE: 1350 x 850 mm MILLING SHAFT DIAMETER 35 mm MOTOR POWER 4 KW (5.5 HP) SLIDING TABLE SIZE: 900 x 350 mm FEED DEVICE WITH 4 ROLLERS