Used ovens for sale (238)

Condition: excellent (used), TECHNICAL DATA This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm working height: 300 mm (over belt) Gedjgi Dv Depfx Admoil heated length: 4250 mm electrical heating power: 300 kW heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm furnace width: 2200 mm furnace height: 2800 mm exhaust gas quantity: 1200 m3 / h

Condition: used, Tempering oven ARTUR NOLZEN type TL30/30/50 Gsdpfx Adjq Ubqijmsil Warm air oven, convection oven, heating cabinet Fabrication no. 14785 Year of construction 1996 Temperature range max. 750°C Internal dimensions 300 x 300 x 480 mm Inner width at center bar 260 mm Connected load 6 kW Mains connection 400 Volt, 50 Hz - Temperature control NOLZEN type TRO t - 96 4 - THEBEN time control, type TR 635 top - Heating time to 750° C in approx. 95 min. Space requirement L x W x H 1300 x 1100 x 1400 mm Weight 310 kg good condition

Condition: used, Year of construction: 1992, Some parts of the burner are still in good condition and can be reused as spare parts. Parts that can be used in emergencies (50 pcs available): 1. Recuperator 2. Combustion chamber 3. Valves 4. Air guiding tube 5. Exhaust guiding tube 6. Ceramic tube for electrode 7. Air, gas, and exhaust heads Godpfx Aow N Rq Djdmjil If you are interested or require further information, please feel free to contact me.

Year of construction: 1997, condition: used, Usable space (height/width/depth): 800mm x 1200mm x 1200mm Maximum batch weight: 1000 kg Maximum furnace temperature: 1350°C, temperature uniformity: ±5 K Control: Stange SE-502 Heating: Electric Heating element material: Graphite Gedpfx Ajwp R Anjdmsil Heating element design: Graphite rods Total heating power: 190 kW Number of control zones: 2 Additional option: Convective heating Cooling gas / gas pressure cooling: Nitrogen N² 5.0 / 1.49 bar Cooling direction: 2 RK (vertical in alternation) Vacuum system make: Leybold Operational vacuum: 5 x 10-2 mbar (fine vacuum)

Year of construction: 2000, condition: like new (used), PADELTTHERM through-hull glow ovens Type: ROH 50 X 15 X 150 - E Circuit diagram no.: 6 - 16 -4. Bp Order no.: 9070/4 Year of construction: 2000 Rated voltage 400 ~ V Control voltage 230 V Rated power 32 KW Protection class IP 54 Rated current 58 Amp. max. temperature 1050° C Weight 2250 Kg Giodpfxocn Tr Ij Admjl very little used in a UNI

Condition: used, Year of construction: 1991, functionality: fully functional, VTTC 224 - R Useful dimensions: 350*600*450 Load: 180 Kg Vacuum level 10*5 (diffusion pump) Giedowlphujpfx Admjl Maximum temperature 1320°C Cooling pressure 5 Bars 1 spare Casing + turbine + spare parts

Condition: good (used), debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - with an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - controllable cooling housing with autom. ball valve - automatic exhaust damper - automatic exhaust flap - monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor. Gjdjmfn Rujpfx Admoil -The furnaces themselves, particularly the brickwork, heating elements, and insulation, are in excellent condition with low or no working hours, making them practically like new. -To operate these furnaces, it will be necessary to implement at least one temperature controller per furnace, a PLC, or a similar control system.

Condition: good (used), Hello, Gisdpfxsxykcas Admjl For sale: Chamber hardening furnace POK 73.1. The machine is fully operational and in continuous use, with the possibility of inspection and testing. The listed price is net and VAT must be added. The machine can be viewed in Starachowice, at 13 Kwiatkowskiego Street. Phone contact available from 7:00 to 16:00.

Condition: excellent (used), Stock number: 2896 Manufacturer: Heraeus Year of manufacture: Machine number: 7406922 Gisdpfx Adjurf H Rjmel Type / Model: MR 260 Interior width x height:: 260 x 160 mm Interior depth: 500 mm Temperature: up to 1000 °C Connection: Accessories/equipment: Condition: very good Weight: 0.15 t Dimensions: 1,100 x 700 x 1,600 mm

Year of construction: 1994, condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 110 mm high Electrical connection values: 3 x 400 volts, 50 hertz Heating: electric, heating coils, semiconductor relay "on/off", 100 kW, capacity: approx. 200 kg / h Working temperature: max. 1100° C Heating zones: 6 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 450 mm Cooling zones: cooling zone 1 approx. 1.4 m, cooling zone 2 approx. 3.0 m, cooling zone 3 approx. 4.5 m Gsdpfsv Ipcxjx Admsil Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: nitrogen N2, hydrogen H2 Dimensions: heated length (6 zones) approx. 3500 mm, furnace length approx. 4600 mm, feed table approx. 5280 mm, removal table approx. 1500 mm, total width approx. 1800 mm, total height approx. 2100 mm, total length approx. 23 m No gas table included.

Year of construction: 2007, condition: repair required (used), functionality: not functional, Belt width: 650 mm, usable height: 220 mm, heated length: 3250 mm. The furnace has 3 heating zones and a heating capacity of 125 kW. The furnace has been stored in a hall for several years, and many components need to be sandblasted and repainted. In addition, the interior of the furnace needs to be relined, and some parts need to be newly manufactured. The furnace can also be completely overhauled by us to meet current technical standards. Gjdpfx Ajxdantedmjil

Year of construction: 1990, operating hours: 16,400 h, condition: good (used), AICHELIN ROTARY FURNACE WITH HESS PRESS AND WASHING MACHINE description: Rotary hearth furnace AichelinModel: RDLGs-R-SJ-1,5m. Year: 1990 External dimensions: 2460 x 2460 x 2335mm Operation: Gas fired with 4 Rekumat self-recovery radiant tube burners. Consumption electrical connection: Connection voltage 380V/50Hz Control voltage 220V/50Hz Total nominal consumption 15Kva Nominal consumption motors 11,7Kva Max. temperature: 950º Cycle time approx. 50 seconds. Hess PressModel : HP 1-48 Year : 1990 Outside dimensions : 1830 x 1650 x 2630mm Empty Weight: 3000kg Max Cooling Unit: 230kg of SteelMax Workpiece Size: Approximately 210mm Gsdonzhx Hepfx Admjil Caber Washing MachineModel: 350 T Year: 1990 Outer dimensions: 7100 x 1470 x 2700mm Unladen weight: 4000kg Loading height: 1180mm

Condition: excellent (used), Walking beam-forging furnace, make Ruppmann Gijdpfsid Im Ejx Admsl max. temperature: 1.250°C useable dimensions (l x w x h): 3.400 x 1350 x 120 mm throughput: 1 ton/h heating: natural gas Heating thru 4 hot air radiant ceiling Bloom burners, with flame monitoring by Kromschröder burners. Temperature measurement by thermocouples, as well as automatic and stepless temperature control. Heat exchanger, combustion air fan.

Year of construction: 1988, condition: used, functionality: unexamined, machine/vehicle number: 26535, Heating: gas Fuel gas: propane Gas overpressure: 80-100 mbar Gjdovkwifopfx Admeil Working temperature: 150-750 °C Heating output: 550 °C (300 kg/h steel) Max. permissible load weight: 350 kg gross Type of loading: automatic with loading device Type of unloading: manually via loading device Max. batch dimensions: 610x910x460 mm

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Gedovxvgrjpfx Admsil

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 700 mm wide, 230 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 160 kW Heating: electric, heating coils, semiconductor relay "on/off" Working temperature: max. 1130° C Heating zones: 4 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 700 mm Belt speed: adjustable from approx. 50-800 mm / minute Cooling zones: cooling zone 1 as a wear part with insulation; 8mm base plate reinforced with beads, double-walled construction, length approx. 1.5 m, cooling zone 3 + 4 as double-walled convection cooling section Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle Protective gas: Exogas, Endexo retorts with insulating flange installed in the furnace Dimensions: Working height approx. 1000 mm, heated length (4 zones) approx. 3750 mm, furnace length approx. 6000 mm, feed table approx. 1200 mm, total length approx. 20 m Giodpfxsv Imhxj Admsl Furnace is available twice (built in 2008 and 2013)

Year of construction: 2002, condition: as good as new (ex-display), functionality: fully functional, Maximum operating temperature Zone 2.. 925ºC Zone 1..700ºC Dimensions of shaker shot Width..510mm Gijdpevtc Apofx Admol Length 3410mm Height 130mm Useful hearth area 1.23m2 Throughout (approximate value, depending from bulk density, shape and dimensions of parts) - Carbonitriding/Carburising case depth 0.1 - 0.2 mm; 550 HV.. - Hardening... 225kg/h Heating Connected load 156kW Idling consumption, 850 °C 50kW Number of radiation tubes Zone 1... 8 Zone 2....6 Removal space above smoke.. Atmosphere circulating Number of fans 2 Total connected load of the furnace apron kVA25

Year of construction: 2016, condition: new, Gas heated tempering furnace type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C Gisdpfx Ajcdixlsdmel circulation fan: 4,0 kW loading weight: 3.000 kg gross

Year of construction: 1986, condition: used, functionality: unexamined, machine/vehicle number: 43563, Heating: Gas Fuel gas: Propane Gas overpressure: 10-50 mbar Gisdpfx Aovkwqvodmjl Working temperature: 150-450 °C

Condition: ready for operation (used), A long furnace Löcher with charging trolley operation is available. The furnace was part of a bending plant for the production of flange rings. Interior dimensions X/Y/Z: approx. 14000mm/500mm/1500mm, max. temperature: 1200°C, total furnace dimensions X/Y/Z: approx. 4100mm/3850mm/16000mm, control: CNC. The machine has a control defect. Documentation available. On-site inspection is possible. Gijdpfx Adswkiipemjl

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 140 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 185 kVA Heating: electric, heating coils, thyristor control "on/off", heating output approx. 174 kW, output > 400 kg br. Working temperature: max. 1150° C Heating zones: 6 Belt construction: Mesh belt made of high-heat-resistant steel, width approx. 450 mm Belt speed: Adjustable from approx. 100-900 mm / minute Heating muffle: Heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 4m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: Nitrogen N2, Hydrogen H2 Dimensions: Working height approx. 1060 mm, heated length (6 zones) approx. 5800 mm, furnace length approx. 6600 mm, feed table approx. 10000 mm, removal table approx. 2000 mm, total width approx. 1900 mm, total length approx. 38 m, total height approx. 2100 mm Giodpov Igcpefx Admol

Year of construction: 2023, condition: ready for operation (used), An originally packed and unused Tanabe rotary kiln with all necessary accessories is available. 1) Rotary kiln: length: 17m, height: 2400mm (+400mm/600mm increase), width including drive: 2600mm, heated zone X/Y: 700mm/8000mm, heating capacity: 200kW, max. temperature: 500°C-550°C (900°C possible with retort change and heating upgrade), feed: screw feeder, speed control of the rotary kiln: 0.5U-2U/min, weight: approx. 23500kg, including separate supply air heater. 2) Rotary tube cooler: length: 10600mm, height: 1600mm (+400mm/600mm increase), width including drive: 2200mm, cooled zone X/Y: 700mm/3500mm, cooling type: water cooling with water circuit, speed control: 1.1U-4.3U/min, outlet: rotary valve, weight: approx. 8200kg. 3) Exhaust air filter including exhaust air fan, HEPA filter and dust collector with a temperature tolerance of 250°C. Control system: Siemens system control for local operation, 3x HMIs, several control panels and control cabinets. Including various accessories such as spare parts, transportation aids and associated smaller devices. The entire system is brand new and is still in its original packaging. The pictures were taken at the place of manufacture. Documentation available. On-site inspection is possible. Gjdpfxjulkums Admsil

Year of construction: 2008, condition: used, Protective gas conveyor belt furnace Working space: 600 mm wide, 200 mm high Electrical connection values: 3 x 400 volts, 50 hertz, approx. 300 kVA Heating: 10 pcs. Recuperator burner, make WS, connected load 400 kW gross Working temperature: max. 1150° C Heating zones: 5 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 600 mm Belt speed: adjustable from approx. 100-900 mm / minute Heating muffle: heat-resistant curved construction with bead reinforcements, length: approx. 6.85m, material: 1.4841 Cooling zones: Zone 1 approx. 1.5 m, Zone 2 approx. 4.0m, Zone 3 approx. 4.0m, Zone 4 approx. 3.0m Cooling zones made of normal steel sheet (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzle, base plate 8mm thick Protective gas: nitrogen N2, hydrogen H2 Godpfx Adev Ifzqemsil Dimensions: working height approx. 1060 mm, heated length (5 zones) approx. 6000 mm, furnace length approx. 6900 mm, loading table approx. 1500 mm, unloading table approx. 1500 mm, total width approx. 2900 mm, total length approx. 30 m The system is available twice (built in 2008 and 2015)

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Giedpfx Aetxb Avodmjl

Year of construction: 2023, condition: ready for operation (used), A foldable tube furnace from Thermconcept is available. Maximum temperature: 1100°C, heated length: 500mm, constant zone: 160mm, recommended tube diameter/length: 70mm/750mm, power: 3kW, dimensions X/Y/Z: 650mm/500mm/510mm. Documentation available. Gjdpfjtxb Apex Admeil