Used Heating System for sale (39,984)

Year of construction: 2024, condition: ready for operation (used), The heat exchangers are part of the system but were commissioned separately. The new price of the system was therefore over EUR 2 million. Lhjdpfx Aeyt Ihboalod The official commissioning took place in April 2024; however, this only involved trial runs and not series production. Technical Data – Modular Chamber Furnace System for Homogenizing Aluminum Billets (Used Equipment) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum billets in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks System Construction The system essentially consists of: • 1 preheating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air circulation • 1 charging machine (BSN 1612) – electric/hydraulic • 12 charging racks (BSN 1614) • Control system with PLC (Siemens S7 1515F 2PN, Profinet) and operator panel • Contact thermocouples for direct billet temperature measurement The system is designed as a complete machine in accordance with Machinery Directive 2006/42/EC (CE compliant). Further information can be found in the attached PDF.

Condition: used, Year of construction: 2012, Müller wood chip boiler 1600kW with moving grate firing, year of manufacture 2012, including pneumatic cleaning, hydraulic feed, hydraulic unit, control system (control system is a few years old and was recently renewed!), boiler pump with mixing valve. Dismantling needs to be carried out. Lhjdjvyrwpopfx Aalsd

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Lhjdoyalblspfx Aaljd

Condition: used, This listing is for 1 of 2 Ortho Biovue System Heat block-32 Lsdpfxsxzh Rko Aalshd

Condition: used, functionality: fully functional, Oil heating system for sale. Available for collection from April. Lhodpfsym N Uvsx Aalsd

Condition: used, Year of construction: 2023, tank capacity: 100,000 l, GENERAL Equipment: Venting/air release Design: Horizontal Year of manufacture: 2023 Notes: Manhole diameter approx. 600 mm; includes optical leak detector, tank fitting for heating oil, overfill prevention device, and ladder with working platform; External diameter: 2,900 mm Total length: 16,050 mm Heating/cooling: present Location: External storage Minden Technical documentation: Drawing, various documents Lodpfx Aaoyckwqslohd Nameplate: Volume: 100,000 liters Product-contact material: Steel Condition: used Cylindrical length: 14,960 mm Last application: Heating oil TANK Support type: Saddles welded on HEATING/COOLING JACKET Internal temperature control: Immersion heater EQUIPMENT Manhole / dome: on the tank

Condition: excellent (used), Year of construction: 2014, Viesmann Vitoplex 100 LS with Weishaupt WM - G10/4A Lsdpfstrl Skex Aaljhd

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 777 kg, heating capacity: 60 kW (81.58 HP), smoke pipe connection diameter: 200 mm, Pellet and split log combination furnace with discharge screw approx. 300 cm, 17.6 to 60 kW. Equipped with new control board, sensor, and ignition fan. Available due to conversion, approx. end of April. Lodpfx Asyq R H Isalohd

Condition: used, functionality: unexamined, Year of construction: 2004, Thermal Oil Heating System AURA Max. permissible pressure (bar): PS 10 Max. permissible temperature (°C): TS 350 Min. permissible temperature (°C): TS 25 Volume (L): V 60 Medium: Thermal oil (Diphyl) Category: III Lhjdpfjw Hxgvjx Aalod The system is available twice, price per unit Note: The machine is still installed and can be inspected on site. The buyer is responsible for dismantling and organizing transport. This is not included in the offer price.

Condition: good (used), Year of construction: 1994, Heating system for hot water or steam Heating capacity: 6 MW Fuel: wood chips With oil burner as backup heating Dismantling must be carried out by the buyer Lhodpfx Aaoyizqnolsd

Year of construction: 2018, condition: excellent (used), EFD Type: MINAC 6/10 SM Heat treatment The compact design of the Minac induction heating system allows for easy installation Lhsdpfx Aaet Din Ajlod and offers fast, concentrated and controlled heating with full repeatability. repeatability. Medium frequency product line Technical data: Maximum output power 10 kW Continuous output power 6 kW Mains voltage 400-480 V Frequency range 10-25 kHz Control range of output power 2-100% Recommended back-up fuse 16 A Cooling water approx. 4 l/min Cooling water flow temperature min./max. 18 - 35°C Cooling water pressure min./max. 4 - 6 bar Weight approx. 50 kg Dimensions (WxDxH): 345 x 708 x 453 mm Year of construction: 2018 optris CTlaser infrared thermometer Abbreviation: 3ML Measuring range: 50 to 400 °C Spectral sensitivity: 2.3µm Typical application: Metals at low object temperatures (from 50°C) Temperature control ECU 1214C Hyfra eChilly water cooler 4-S Cooling capacity 4395W The device comes from the laboratory sector. Only a few operating hours. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: not inspected (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 230 V, We offer this reconditioned Schwank supraSchwank 15 / 2 gas heating system, year of manufacture 2015. Ledpfxsygbbze Aaljhd

Year of construction: 2013, condition: ready for operation (used), Technical details on demand. Ledpfxog Uwx Rs Aalehd

Condition: new, - NEW -without side panel and without baseKanuk® Originalwarm air stove- combustion chamber opening H x W (cm): 31 x 31- flue pipe connection:top / rear- efficiency (%): 83.9- log length (cm): 48- minimum flue draught (Pa): 16- ash box: no- BimSchV stage 2: yes- lignite briquette: no- CE mark: Yes- Total power (kW): 17,7- Room heating capacity (m³): 540- Viewing pane (cm): 24 x 14- Weight (kg): 153- Wood consumption (kg/h): 4,2- Flue gas throttle: No- Type 1 (self-closing door): Optional- Logs, wood briquettes: Yes- AT §15a B-VG standard: Yes- Outside air connection (mm): 80 mm- Dimensions H x W x D (cm): 80 / 58 / 95- Flue pipe connection (mm): 160- Door diameter (cm): 28- Flue gas temperature (°C): 232- Flue gas mass flow (g/s): 14.28- Combustion chamber H x W x D (cm): 40 x 44 x 49.5- Pane flushing: Yes- DIN EN number: 13240- Primary, secondary, tertiary air: Yes- LRV Switzerland: YesNo. 2100108 Lsdsvyd Awspfx Aaljhd

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. Ljdpfxsxwhw Aj Aaljhd BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: used, Year of construction: 2016, functionality: fully functional, Heating boiler for sale. Available for collection from February 2026. Lhodpfjx At Nbjx Aalsd Rated thermal output: 150 kW Combustion thermal output: 45–150 kW Boiler water capacity: 370 liters Boiler class: 3 Maximum operating overpressure: 3.0 bar Maximum operating temperature: 90°C

Condition: used, Year of construction: 1998, Mawera FU 550 RIA wood chip boiler, output 550kW, year of manufacture 1998, incl. feed auger with backfire protection, incl. fuel conveyor auger, incl. bunker discharge with oscillating discharge auger, incl. ash removal, incl. dedusting with exhaust fan, incl. control system, incl. return flow lift, complete fuel conveying/feeding system was newly built in 2010, plant must be dismantled by buyer. The installation can be rolled outside in one piece. Lhsdpfx Aovgcwmjaljd

Condition: used, Year of construction: 2018, functionality: fully functional, heating capacity: 675 kW (917.74 HP), Complete biomass heating system based on wood pellets Brand wood pellet boilers: KWB Type: Pelletfire Plus MF2S135 (135 kW) Number: 5 (cascade setup) Control: KWB control with online remote control Power range: 40 - 675 kW Year of construction: 2018 Thermal efficiency: 93% Filters: Yes, electrostatic filters are mounted in all flue ducts to collect fine dust Setup: 2 containers on top of each other The installation is complete and custom-made as a "stand-alone", so that the containers are on top of each other. The lower container contains the 5 biomass boilers with the control technology and the upper container contains the bulk stock for the wood pellets. A fuel compartment with a removal system and drop tube has been mounted per boiler. Lhedpfxjv Uz Efj Aaljd The installation is very well maintained and only certified wood pellets with the EN plus A1 quality mark have been used as fuel. The heating installation is currently stored in a preserved state. If you are seriously interested, the installation can be visited by appointment at the storage location near Rotterdam. Transport and commissioning in consultation. The steelwork that can be seen on the outside photo is not part of the installation. The biomass installation is suitable for, among other things: apartment complexes, apartment buildings with block heating, public swimming pools, large utility buildings, horticulture

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, power: 350 kW (475.87 HP), Heating system, heating, chip heating Manufacturer Endress Type USF-W 350 Output 350 kW Year of manufacture 2010 with feed Lsdpjx E Auzefx Aaljhd with ash discharge with control

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Lhedpfxjyhlrmj Aalsd

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system Lhodow Rpdropfx Aalsd 60 kW heating capacity year of manufacture 2014 without discharge unit (can be provided if needed)

Condition: excellent (used), Year of construction: 1998, Viessmann Paromat-Triplex Output: 225kW Installed in a container. Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. Lhedpfx Aot Iuyfoalsd The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2007, Viessmann Vitoplex 200 boiler Version: SX2 Output: 150Kw Burner: Several oil and gas burners available Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. The seller accepts no liability for typing and data transmission errors. Lodpfsmnqb Nsx Aaljhd Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2008, Boiler Buderus GE315 Output:170kw Burner: oil or gas Weishaupt burner available on request Viewing by telephone only! Preferential sale to dealers, tradesmen or export. All information without guarantee, subject to errors and prior sale. Lhsdpfxomnqcme Aalsd The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Condition: excellent (used), Year of construction: 2002, Fröling boiler Output: 1250Kw Year: 2002 Burner: Gas or oil burner available on request Lsdpfomnqhrex Aalshd