Eddy Current separator

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, overall weight: 6,300 kg, roller diameter: 250 mm, working length: 3,100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bending length: approx. 3,100 mm Roller diameter: approx. 250 mm Gbodpfx Ae Ahg T Hjikow MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,000 x 1,800 mm Total weight: 6,300 kg

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: Gbodpeua Tbwefx Aikow The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, Year of construction: 1980, machine/vehicle number: 9089, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between December 1st, 2026, and December 10th, 2026! TECHNICAL DETAILS Gbsdpfxj Ahgxcs Aiksw Cutting length: approx. 3,100 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 4,000 x 2,000 x 2,200 mm Weight: 5,000 kg Lot number: 77

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 11520, year of last overhaul: 2022, overall weight: 3,800 kg, product height (max.): 280 mm, Equipment: documentation/manual, The machine was overhauled in 2022! TECHNICAL DETAILS Number of printing colors: 1 Product diameter: 20–130 mm Product length: 40–280 mm Product height: max. 280 mm MACHINE DETAILS Feeding system: K23 Scrambler with hopper Inspection system: Deco camera inspection system Operating voltage: 230/400 V Frequency: 50 Hz Rated current: 32 A Operating pressure, compressed air: max. 6 bar Compressed air consumption: max. 7 Nm³/h Dimensions & Weight Dimensions (L x W x H): 7,500 x 6,450 x 2,300 mm Total weight: 3,800 kg EQUIPMENT Fully automatic high-speed screen printing machine K9 Single-color screen printing system Gedpfs Ahppwex Aiksbw Automatic product sorting and feeding system K23 Scrambler Hopper Deco camera inspection system for print quality control Suitable for printing cylindrical products such as bottles, tubes, and similar containers Complete maintenance history available up to the time of storage.

Condition: ready for operation (used), Circumferential speed: 80m/s, an on-site inspection is possible. Gbjdpfx Ajrp E Nnjiksw

Condition: used, Year of construction: 2024, operating hours: 20 h, empty load weight: 2,800 kg, arm reach: 3,450 mm, working height: 9,600 mm, TECHNICAL DETAILS Gbodpj Ahm N Ijfx Aikjw Working height: 9.60 m Platform height: 7.60 m Lateral reach: 3.45 m Load capacity: max. 230 kg MACHINE DETAILS Drive type: Electric Dimensions of the aluminum platform: 1.20 × 0.87 m Turning radius (inside/outside): 0 / 1.21 m Turret rotation: ±180° Climbing ability: max. 19° (35 %) Permissible working inclination X-axis: max. 3° (5.25 %) Permissible working inclination Y-axis with automatic stabilization: max. 10° (18 %) Travel speed in retracted state: max. 2.8 km/h Travel speed in extended state: max. 1 km/h Weight: 2,800 kg Operating hours: 20 h EQUIPMENT Track chassis with white tracks Two-person work platform Additional single-person work platform with a load capacity of 120 kg Load hook

Condition: used, Year of construction: 2025, operating hours: 55 h, load capacity: 990 kg, arm reach: 4,200 mm, TECHNICAL DETAILS Load capacity: max. 990 kg (depending on the outreach and load chart) Hook height: max. 4.90 m Lateral reach: max. 4.20 m (with manual extension) Lifting capacity: max. 600 kg Working angle of the crane jib: -30° to +70° Swivel angle of the crane jib: ±25° Swivel speed: 2.5 kNm MACHINE DETAILS Operating voltage of the electric motor: 220 V Travel speed: 2.6 km/h Gradeability: max. 25° Operating pressure at the control block: max. 190 bar Hydraulic oil tank volume: 8 l Operating hours: 55 h Gsdpfj Ahm Iuox Aikebw EQUIPMENT Track chassis Winch for single-rope pulling Electric motor Manual jib extension

Condition: new, Year of construction: 2023, machine/vehicle number: 7YXXX, VIS G is the ideal and the most efficent solution for serap processing like stampings, trimmings, wires mostly recommended for the automotive industry, metal recyclers and non-ferrous metal remelting industry. Gbodpfxsmqi Akj Aikjw

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, spindle speed (max.): 10,000 rpm, bar passage: 20 mm, travel distance X-axis: 58 mm, travel distance Y-axis: 534 mm, Equipment: bar feeder, No minimum price – guaranteed sale to the highest bidder! Gods Ahgklopfx Aikebw TECHNICAL DETAILS Bar diameter: 20 mm Linear axes: 6 Travel range X1 axis: 58 mm Travel range Y1 axis: 534 mm Rapid traverse speed: max. 30 m/min Spindle speed: 100–10,000 rpm Spindle motor power: 3.7–5.5 kW Speed of driven tools: max. 10,000 rpm Tool positions: 10–14 MACHINE DETAILS Supply voltage: 400 V Phases: 3 Frequency: 50 Hz Connected load: 13 kVA Rated current: 19 A Fuse rating: 32 A Control voltage: 115/230 V Direct current: 24 V DC Dimensions & Weight Machine dimensions: 2,400 × 2,060 × 1,370 mm Machine weight: approx. 3,000 kg EQUIPMENT ROBObar SBF-532 bar feeder

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Sawing unit Milling unit Work table Table dimensions: 1,180 × 990 mm Fence Fence width: 300 mm Feed 3-roller feed MACHINE DETAILS Machine type: Combination machine Manufacturer: HUG Gsdpfs Ad Iyzex Aikebw Dimensions Length: 2,000 mm Width: 1,200 mm Height: 1,700 mm Weight: 600 kg EQUIPMENT Sawing unit Milling unit 3-roller feed

Condition: new, Year of construction: 2023, Coperion ZSK 27 MV Plus extrusion line. Application: Pet food and dental sticks. Year: 2023, never used, still in its original packaging. Gedpfx Asxr Hgxeiksbw

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WORK AREA Table length: approx. 1,500 mm Planing width: 410 mm Gsdpfx Ae Ad Ix Doikjbw MACHINE DETAILS MACHINE DIMENSIONS Length: 1,500 mm Width: 800 mm Height: 1,500 mm Weight: 500 kg

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Manufacturer Brand: Schuler Machine Type Model: Drop shear MACHINE DETAILS Dimensions Length: 1,600 mm Width: 500 mm Height: 1,500 mm Weight Gbedpfx Ao Ad Ixqeikew Machine weight: 400 kg

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 1,500 kg, total length: 3,340 mm, total width: 2,360 mm, total height: 2,925 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: Gbjdpew Ryl Hofx Aikew The ASCO SD Compact is a semi-mobile screening machine for efficient processing of soil, gravel, wood chips, waste, and recycling materials. It delivers high-precision separation, flexible operation, and reliable performance for construction sites, recycling plants, and material processing facilities. Key Features: • Modular design with interchangeable drums & quick-change system • Adjustable screen inclination & variable drum speed (5–20 rpm) • Up to four fractions per drum segment with cleaning brush system • Optional bunker expansion for +50% input capacity • Compact, semi-mobile design with easy transport & setup Tech Highlights: Drum Ø 1.3 m · L 2.1 m · Mesh Ø6–Ø100 mm · Qmax 20–50 t/h · n 5–20 rpm · P 5.5–7.5 kW · Weight 1500 kg · Screening surface 7 m²

Condition: ready for operation (used), Year of construction: 1961, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL DATA Manufacturer: PEHAKA Type: USF 4R Year of manufacture: 1961 Machine type: Metal band saw SAWING DATA Roller diameter: 380 mm Overhang: 380 mm Workpiece height: 260 mm Table dimensions: 600 × 600 mm Cutting speed: 0–2,000 mm/min MACHINE DETAILS ELECTRICAL DATA Total power consumption: 1.5 kW DIMENSIONS AND WEIGHT Length: 1,200 mm Width: 1,000 mm Height: 1,900 mm Weight: 1,300 kg Gsdpfx Aie Ad Iwyjksbw