Condition: excellent (used), Belt grinding machine HOLZKRAFT LBSM 2505 - used - Grinding belt cover, Right-/left-hand rotation, Swiveling grinding unit ----- Technical data ----- Table size: 2,400 x 800 mm, Dedpfx Akoyfwcrskjuw Throat depth: 650 mm, Motor: 3 kW, Grinding belt dimensions (LxW): 150 x 6,400 mm Quality information: - Belt tracking checked - Grinding shoe checked - Height adjustment checked - Grinding table guide checked - Complete basic cleaning performed - Electrical system checked - Immediately ready for operation

Condition: new, -Continuously adjustable sanding unit (0 - 90°) for vertical and horizontal sanding -Oscillating sanding belt for better sanding results and a longer service life of the sanding belt -Quick and easy sanding belt change via quick-clamping system -Grinding sole with graphite coating as standard for a longer service life of the sanding belt -Work table made of gray cast iron adjustable via handwheel with T-slot -Including side sanding sleeve device for sanding curves and radii -Two suction nozzles Ø 100 mm -1x sanding belt 2750x 150mm grain 80 -1x sanding sleeve Ø38mm grain 80 -1x sanding sleeve Ø50mm grain 80 -1x sanding sleeve Ø75mm grain 80 Dimensions and weights: - Length (product) approx.: 1515 mm - Width/depth (product) approx.: 550 mm - Height (product) approx.: 1150 mm - Weight (net) approx.: 207 kg Extraction connection: - Extraction nozzle diameter: 100 mm Work table(s): - Work table length: 900 mm - Work table width: 305 mm - Work table height adjustment: 120 mm Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz Grinding unit: - Sanding belt length: 2750 mm - Sanding belt width: 150 mm - Belt rotation speed(s): 16 m/s - Oscillation stroke: 15 mm - Sanding surface length: 1010 mm Dedpfx Aksvxkv Uokeuw - Sanding surface width: 190 mm - Sanding height max.: 170 mm - Sanding unit swivel: 0 – 90 ° Workpiece: - Workpiece width max.: 1010 mm - Workpiece height max.: 150 mm - new exhibition machine -

Condition: new, Edge sanding machine HOLZKRAFT KSO 200 F - Exhibition machine - Relief rollers on the fence rulers, with swiveling sanding unit, and oscillating sanding belt, Veneer sanding device, Oscillation with separate motor, height-adjustable sanding table, extendable roller table extension, rubberized sanding drum ----- Technical data ----- Sanding belt dimensions: 3,000 x 200 mm, Work table dimensions: 960 x 350 mm, Work table height adjustment: 230 mm, Sanding surface: 1,050 x 300 mm, Dujdpfeu R S Erox Akkjw Belt speed: 20 m/sec, Oscillation stroke: 20 mm, Suction nozzle Ø: 140 mm, Motor 400 V: 4.0 HP / 3.0 kW, Dimensions (LxWxH): 1,900 x 900 x 1,350 mm, Weight: 290 kg - new exhibition machine -

Condition: used, Wide Belt Sander SCM UNO RCS - used - Combination unit with contact roller and sanding pad, contact roller made of steel, rubber-coated contact roller, sanding belt oscillation, infeed and outfeed table extension. ----- Technical Specifications ----- Working width: 920 mm Number of belts: 2 units Sanding belt size: 930 x 1,525 mm Feed speed: 4.5 / 9 m/min Max. workpiece thickness: 160 mm Min. workpiece thickness: 3 mm Extraction port Ø: 2x160 mm Motor power: 11 kW Dimensions (LxWxH): 1,700 x 1,480 x 1,600 mm Weight: 1,175 kg Djdpfxjy Dhude Akkjuw

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use Djdpexnm Rcsfx Akkjuw

Condition: new, HOUFEK SPB Buldog 5 RC wide belt sander -Exhibition machine- Includes: - HOUFEK SPB Buldog 5 RC wide belt sander Working width: 1,350 mm Includes: - Grooved steel roller Ø 160 mm HOUFEK Including: - HOUFEK segmenter sanding pad electronically controlled, for width 1,350 mm Sanding pad PS 50 E Includes NC control with Duodpfx Asu R Szmekksw 10.1" touchscreen Frequency converter for the sanding unit 3-18m/s Automatic table positioning Two-zone interval blow-off device with Nozzle oscillation for sanding belt cleaning - new exhibition machine -

Condition: excellent (used), Year of construction: 1999, Manufacturer: WEGOMA Model: KS 2400 Category: Edge sanding machine Year of manufacture: 1999 Table width: 300 mm Table length: 730 mm Total units: 1 Max. sanding belt width: 150 mm Sanding belt length: 2,400 mm Main motor: 1.85 kW Sanding sleeve Round sanding support Oscillation Height adjustment: Table, manual Sanding belt tiltable: Yes Required length: 1.7 m Required width: 0.8 m Required height: 1.5 m Location: ex-stock 54634 Bitburg Dusdpfxoyza Aho Akkew - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Dusdpjzh Rufofx Akksw Features and technical data: MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT ROLLER, 2ND BELT COMBINATION UNIT ROLLER/SHOE FOR SOLID WOOD, VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 - Rubber-coated SANDING ROLLER mm: 180 - SANDING SHOE WIDTH mm: 50 - MAIN BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER hp: 0.75 - Infinitely variable feed belt gearbox, speed adjustable m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR hp: 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed Availability: short notice Location: Flörsheim

Condition: repair required (used), Year of construction: 1996, MACHINING CAPACITIES: - Height (thickness): 3 to 160 mm Dedjy I Srzjpfx Akkeuw - Maximum workpiece width: 1100 mm - Minimum workpiece length: 390 mm - Abrasive belt speed: 18 m/s - Conveyor feed speed: 4.5 – 9 m/min - Suitable belt dimensions: 2150 x 1115 mm MACHINE CONFIGURATION: - 4 infeed rollers and 4 outfeed rollers - Table positioning with sensor - Vacuum conveyor system (perforated belt and motorized fan) - Pneumatic foot switch 1) Calibration 2) Calibration / sanding 3) Finishing sanding MACHINE SPECIFICATIONS: - Main power supply: 400V, three-phase, 50Hz - Automatic star-delta starter - Ammeter(s) for power consumption monitoring - Pneumatic tensioning, oscillation, and retraction of rollers - Pneumatic supply, working pressure: 6 bar - Dust extraction, 3 upper ports, Ø mm Recommended air flow: 2500 m³/h per hood Note: For optimal performance, please ensure that sanding belts are released when the machine is not in use, and avoid any moisture, including condensation, inside your facility during winter. Machine dimensions: 1920 x 2050 x h.2240 mm

Condition: used, Belt length: 7330 mm x 150 mm, handwheel adjustment Storage location: Nattheim Dusdezkl Ufepfx Akkew

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, feed rate X-axis: 24 m/min, working width: 1,100 mm, grinding belt length: 1,890 mm, grinding belt width: 1,100 mm, empty load weight: 3,500 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of units: 3 Unit 1 Position: Top Dedpfx Aezdzraokkeuw Unit type: Contact roller Sanding belt length: 1,890 mm Sanding belt width: 1,100 mm Roller diameter: 260 mm Roller material: Rubber Motor power: 18.5 kW Unit 2 Position: Top Unit type: Sanding shoe Sanding belt length: 1,890 mm Sanding belt width: 1,100 mm Roller diameter: 100 mm Roller material: Steel Motor power: 15 kW Unit 3 Position: Top Unit type: Brush unit Roller diameter: 140 mm Motor power: 0.55 kW Max. working width: 1,100 mm Infeed table length: 620 mm Outfeed table length: 1,200 mm Feed motor: 1.5 kW Feed speed: Manual Min. feed speed: 1 m/min Max. feed speed: 24 m/min Feed speed control: Stepless MACHINE DETAILS Voltage: 400 V Power: 36 kW Dimensions & Weight Dimensions (L x W x H): 2,300 x 1,800 x 2,450 mm Empty weight: 3,500 kg Transport packages: 2 Operating hours: 12,542 h

Condition: used, Year of construction: 2005, Number of belts: 2-belt max. Passage height: 150 mm max. Working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller, sanding shoe 1st unit: electronic individual segments 35 mm Sanding belt length of 1st unit: 1900 mm Djdpfxozkh Sys Akksuw Sanding belt width of 1st unit: 1370 mm Sanding belt speed of 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubber-coated contact roller 65° Shore, sanding shoe 2nd unit: electronic individual segments 35 mm Sanding belt length of 2nd unit: 1900 mm Sanding belt width of 2nd unit: 1370 mm Sanding belt speed of 2nd unit: continuously variable 2 - 18 m/sec Belt blowing device: for 2nd unit Cleaning brushes: Yes Finish sanding possible: Yes Vacuum carpet: Yes Feed rate: continuously variable from 2.5 - 13 m/min Control: Touch screen, electric/pneumatic Belt oscillation: yes Infeed height: fixed (top part moves) Table display: digital Working height or table height: 900 mm Motor power: 36 kW Storage location: Nattheim

Condition: used, Year of construction: 2007, machine/vehicle number: MR006928, Robust and precise wide belt sander with a working width of 1,100 mm. In good condition and ready for immediate use. This Kündig Premium-2 is a robust and precise wide belt sander, equipped with two sanding units: a calibration roller for efficiently sanding solid wood and sheet material to size, and a sanding shoe for a fine, uniform finish. This sander is in good condition and ready for immediate use. Technical specifications: - Number of sanding units: 2 - Sanding unit 1 type: Calibration roller - Sanding unit 2 type: Sanding shoe - Maximum sanding width: 1100 mm - Maximum working height: 200 mm - Minimum working height: 3.5 mm - Feed rate: 3 - 15 /min - Sanding belt length: 2000 mm - Sanding belt width: 1120 mm Dedpfx Akjzh Hixokouw - Serial number: 26453

Condition: new, Year of construction: 2023, Exhibition machine Year of manufacture: 2023 Features and technical data: - Double-sided operation with surface and contact grinding sides - Abrasive belt size: 200 x 2000 mm - Belt drive motor: 3 kW - Programmable oscillation stroke: 10–90 mm - Grinding unit motorized tilting up to 45 degrees Dujdoxvnmnjpfx Akkew - CE-compliant / Dust-tested Accessories: Semicircular table at the belt drive roller Dimensions (LxWxH): 1800 x 1000 x 1500 mm Weight: 610 kg Location: Solingen Availability: short-term

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). These enquiries will not be answered. Features and technical data: • Robust, space-saving 2-belt wide belt sander for demanding pre- and finish sanding • Constant working height thanks to adjustable top section • Working width: 1,350 mm • Overhead sanding, with 2 sanding units • 1st unit equipped with a grooved rubber contact roller of proven hardness • Pneumatically (program controlled) adjustable contact roller; contact roller height continuously adjustable according to a sanding grit scale • 2nd unit equipped with an electronically controlled, segmented sanding pad (segment width 35 mm) and quick-change graphite wear strip • Parallel spring-mounted, ground steel pressure roller at the infeed • Rubber-coated pressure rollers between sanding units and at the outfeed • Motor: 15 kW (20 HP), 400 V/50 Hz, with soft start for reduced current draw during startup • Motorized, fine-adjustable height adjustment with digital display • Belt tensioning, tracking, and oscillation are pneumatically controlled, compressed air consumption approx. 4 l/min • Optimal safety thanks to automatic emergency stop with disc brake in case of belt breakage • Workpiece feed: 0.75 kW (1.0 HP) with fabric-reinforced rubber conveyor belt • Fully integrated electrical system with contactor control; automatic star-delta start for the main motor, motor protection, and ammeter for monitoring material removal • Maximum passage height: 200 mm • Sanding belt dimensions: 1,350 x 2,000 mm Comfort features: • Automatic thickness adjustment across the entire working width • Workpiece overthickness protection with immediate feed stop and automatic lift of the machine top section • Continuous adjustment of material removal • Electronic feed rate control at the operator panel, stepless from 3 to 15 m/min • PLC control/programming with color touch-screen and TEACH-IN memory function (store parameters at the push of a button based on sanding results, i.e., no manual data entry required) • Pneumatic conveyor belt tracking control • Workpiece support rollers at infeed and outfeed • Enormatic: Fully automatic quick setup and feed solution • eco*-Energy saving mode • Error diagnosis Dsdjuhiq Depfx Akksuw • Job and operating hour counters • Machine in E-Plus version (RE) Including outfeed table extension, 1,350 mm, foldable, without insert plate Location: Solingen Availability: short-term

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored Dusdpfeyh Hwujx Akkjw - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Year of construction: 2024, condition: used, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Dedpfx Aszf N Ncokkouw Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: used, Technical data: - Manufacturer Leif & Lorenz - Working width max. 1,200 mm - Brush diameter *160 mm Dodpfjzf N Ekex Akkeuw - Suction connection D100 mm - Year of manufacture 2005 - Motor power 0.37 kW - Location, in stock in Blomberg - Also available for assembly with roller or belt conveyor

Condition: used, Year of construction: 1994, Max. passage height: 160 mm Sanding belt length, unit 1: 1900 mm Max. working width: 1350 mm Dusdpey Naq Uofx Akksw Number of belts: 2 Belt, unit 1: Calibrating roller, grooved, rubber design Unit 1: Steel, grooved Sanding belt width, unit 1: 1350 mm Unit 2: Combination sanding unit Design, unit 2: Roller/shoe Control: Manual control panel, electric/pneumatic Belt oscillation: pneumatic Infeed height: fixed (top section moves) Table stroke: electro-mechanical Table display: mechanical numerical display Working height or feed table height: 900 mm Location: Nattheim

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 2-Belt Wide Belt Sander - Usable working width: 1100 mm - Abrasive belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller, Art. 018: 150 mm - Sanding shoe width: 50 mm - Motor power: 14.7 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with infinitely variable speed: 4–20 m/min - Motorized height adjustment: 0.24 kW - Mechanical belt oscillation "ECO GEAR PATENT SYSTEM" - 1 pc. drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pcs. rubber-coated pressure rollers - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 extraction ports, Ø 160 mm - Automatic table positioning Additional options: - Electronically segmented sanding pad with 20 segments - Increased belt motor power to 14.7 kW instead of 11 kW - Frequency-controlled feed speed - Electronic machine function control with 7" touchscreen Duedpfxsxz Ialj Akkew BASE MACHINE ACCORDING TO CE STANDARD Art. 029 IMPORTANT: New patented belt oscillation system 1. No valves 2. No light barrier 3. Not sensitive to dust 4. Energy-saving and environmentally friendly system Availability: Short notice Location: Holm

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Industrial cross-sanding machine for high-quality surface finishing of wood, veneer, and painted workpieces. The combination of a cross-sanding and longitudinal-sanding unit enables efficient and precise processing in a continuous flow. Processing units: 1 × Cross-sanding unit with pressure pad belt 1 × Longitudinal-sanding unit 1 × Brushing unit Technical data Technical data: Sanding width: 1,300 mm Maximum workpiece thickness: 140 mm Working height: 780–920 mm Feed rate: 4.5–22 m/min Duedpfx Akezinviokjw Cross-sanding belt: 4,900 × 150 mm Pressure pad belt: 4,650 × 140 mm Longitudinal-sanding belt: 2,620 × 1,350 mm Brush roller: Ø 150 mm Workpiece vacuum clamping system: 7.5 kW Total connected load: 44 kW Machine weight: approx. 3,850 kg

Condition: used, Year of construction: 2008, total length: 2,060 mm, total width: 830 mm, total height: 1,180 mm, Colour: Grey Empty weight: 566 kg - Year: 2008 - Documentation available: No - CE certificate present: No - Table length [mm]: 1000 - Table width [mm]: 400 - Sanding belt width [mm]: 200 - Sanding belt length [mm]: 3200 - Extraction nozzle diameter [mm]: 120 - Conveyor belt speed [m/s]: 13 - Min. tilting angle [°]: 0 - Max. tilting angle [°]: 45 - Transport dimensions: 2060mm x 830mm x 1180mm (l x w x h) - Transport weight [kg]: 566kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dusdpsywlfysfx Akksw Yorick Diebels

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 2435059, total length: 1,500 mm, total width: 700 mm, total height: 1,450 mm, table height: 900 mm, type of input current: three-phase, table length: 1,000 mm, table width: 280 mm, height adjustment type: electric, input voltage: 380 V, grinding belt length: 2,580 mm, grinding height: 150 mm, Enorm (now Kündig) edge sanding machine in very good, used condition. LBK-D/solid – manufactured in 1995. The edge sanding machine was purchased from a dealer in 2022. The machine is being sold as part of the closure of our carpentry business. Price for pickup – delivery possible upon request. The sale is made with the exclusion of any warranty for defects. Liability for intent, gross negligence, as well as for damages resulting from injury to life, body, or health remains unaffected. Claims for defects that were fraudulently concealed also remain unaffected. Dodpfx Aksziupiokeuw An inspection of the machine is possible by arrangement. Fixed inspection dates are July 18th or August 1st from 10 a.m. to 2 p.m. at our facility in Stemwede.

Condition: good (used), Code: 0437 Brand: CMC - ITALY Model: CL 300 - CE Standard Belt sanding machine with double gooseneck and 3 motors for joinery, furniture, custom-made furniture, window and door frames, doors, panels, metals, aluminium and various other applications – CE Standard Worktable length 3000 mm Worktable width 800 mm Vertical table stroke 670 mm Transversal table stroke 800 mm Gooseneck depth 700 mm Gooseneck height 250 mm Pulleys diameter 250 mm N° 2-speed motor 3/4 Hp Djdpfx Akozkhmkokouw Table lifting/lowering motor 0,5 Hp Suction motor 0,5 Hp Belt width 120/150 mm Belt length 7850 mm Overall dimensions mm 4000 x 1550 x 1600 h Weight kg 490

Condition: used, Year of construction: 2021, Oil Application Machine LW100.6/300 Two-Roller Machine – Roller width: 300 mm, material passage up to 80 mm. Oil application on top and bottom. Adjustable feed speed approx. 6–35 m/min. Motor 0.37 kW, 400 Volt, 50 Hz. CE certificate. Machine table working height 900 mm, powder-coated. Additional safety hood with adjustable pass-through thickness, with plexiglass insert. Non-driven roller conveyor 1300 mm, working height 900 mm, height adjustable. Storage location: Nattheim. Dsdpfxsxy Tmuo Akkeuw