Condition: good (used), WIDE BELT SANDER SCM Sandya 10 Sanding width 1100 mm First unit with hard rubber calibrating roller Dsdpfxeyy Nnko Ag Djkk Second combination unit with soft rubber roller and pad Single motor for both units - 18.5 kW Pneumatic oscillation Adjustable feed speed Electric table adjustment Table position display Thickness gauge Good condition, tested and ready for demonstration

Condition: used, Year of construction: 1997, functionality: limited functionality, - Oscillation defective - Main switch replaced - Machine is operational - Sold without warranty Dodjyi Ug Aspfx Ag Djkk

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 180 mm, workpiece width (max.): 1,000 mm, No reserve price - guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. workpiece width: 1,000 mm Min. workpiece thickness: 3 mm Max. workpiece thickness: 180 mm Max. feed speed: 25 m/min Unit 1 Unit: Combined roller/pad Material: Rubber Unit 2 Unit: Vertical pad MACHINE DETAILS Motor power: 1.2 kW EQUIPMENT Working table with fixed height Working level Djdpfx Ajyttyvog Djkk Feed belt The machine is sold and delivered in its actual and legal condition (“as seen and approved”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 6385

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 38947, Machine available at the end of March/beginning of April 2026 Dedpeyrtriefx Ag Dskk incl. extraction nozzle Workpiece thickness: 3 - 150 mm Feed speed: 4/8 m/min Abrasive belt oscillation contactless (photo-electric) - 1st unit (calibrating) Drive motor: 11 kW Steel sanding roller D=140 mm Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Abrasive belt grit compensation Extraction nozzle D=180 mm - 2nd unit (calibrating/fine sanding) Drive motor: 11 kW Sanding roller hardness approx. 90° Shore Abrasive belt grit compensation 2 pcs stationary and flexible contact air shoes Workpiece infeed control Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Extraction nozzle D=180 mm - 3rd workpiece cleaning brush Extraction nozzle D=140 mm Feed table pneumatically adjustable (spring-loaded/fixed) Front and rear table extension

Condition: used, OTT MEGAtronic 111 Wide-belt calibration and fine sanding machine 1st sanding unit: calibration roller unit Dodeyw Rknjpfx Ag Dokk 2nd sanding unit: electronically controlled segmented pad unit Working width: 1100 mm Feed speed: 5 + 10 m/min Sanding unit motor power: approx. 11 kW Machine is WORKSHOP TESTED Available ex stock Lieboch

Condition: excellent (used), CATALOG NUMBER 7324 Technical Specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: steel roller + pad + steel roller - Bottom: steel roller + pad + steel roller Top: - 2 pressure rollers, rubber, feed - sanding unit - idler roller - 2 pressure rollers, rubber, feed Bottom: - sanding unit - side guiding rail - electronically adjustable sanding height 0.37 kW - 6 feed speeds + forward/reverse: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor 0.6 kW - main motors 2 x 4 kW - extraction port diameters: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm Dkedpjx S I Nqsfx Ag Dok - weight: 630 kg – unpainted – used sander, in very good condition Net price: 11,500 PLN Net price: 2,730 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: used, used 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Machine no. 7304051 Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Belt length approx. 8500 mm Dodpfoyvvr Uox Ag Dokk Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as seen, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Machine no.: 22138 CE type tested GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Electric adjustment Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Dksdpfx Ajyvvr Ijg Dsk Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: excellent (used), WIDE BELT SANDER Butfering 110cm Model – super 111L Dkedeyymlyspfx Ag Djk Sanding width: 1,100 mm 1 combination unit with steel roller The pad has quick raise/lower capability 11kW motor, star/delta starter Two feed speeds Electric table adjustment Electronic table position display Oscillation with photocells Sander in very good condition, ready for operation Machine dimensions: width 180cm, length 185cm, height 200cm Weight approx. 1,500kg

Condition: used, Year of construction: 1991, EDGE SANDING MACHINE LZK 4: Langzauner edge sanding machine LZK Machining and sanding of all types of wood, also in combination with plastics Year of manufacture: 1991 Motor power: 3 kW Belt speed: 22 m/sec Belt dimensions: 3000 x 200 mm Table size: 1250 x 350 mm Height adjustment range: 200 mm Extraction port diameter: 110 mm Minimum air speed: 20 m/sec Extraction capacity: 700 m3/h Total weight: 450 kg Total connected load: 3.2 kW Operating voltage: 3 x 380 V 50Hz Required space: 1900 x 900 mm All technical data and information as per brochure Dsdpew A Aa Esfx Ag Dekk

Condition: used, Year of construction: 2023, Used machine Year of manufacture: 2023 Condition: absolutely as new, machine is unused Equipment and technical specifications: - 2-belt machine; 1st belt: roller, 2nd belt: platen - Usable working width: 1100 mm Dedpfx Aew E Ty Ujg Djkk - Sanding belt dimensions: 1120 x 2150 mm - Max. workpiece thickness: 160 mm - Steel calibration roller: 150 mm - Platen width: 50 mm - Belt motor power: 11 kW - Belt speed: 18/16 m/s - Feed motor power: 0.55 kW - Adjustable feed conveyor with steplessly variable speed: 4/20 m/min - Height adjustment motor: 0.24 kW - Mechanical belt oscillation "Eco Gear Patent System" - 1 drum brake for belt deceleration - Swiveling roller for belt tensioning - 3 pressure rollers, rubber-coated - Emergency stop bar at infeed - Electronic workpiece thickness display - 2 roller conveyors (each with 2 rollers) at infeed and outfeed - 1 extraction port, 160 mm Ø - Automatic table positioning - New patented belt oscillation system - No valves - No photoelectric sensors - Not sensitive to dust - Energy-efficient, eco-friendly system - Since 2008 this machine model with the mentioned system has been running continuously without lateral belt runoff!!! - Includes Unitek belt motor 14.7 kW instead of 11 kW (upgrade) - Includes Unitek pneumatic platen with control synchronized to feed speed Availability: short notice Stock location: Saxony-Anhalt

Condition: good (used), Year of construction: 1988, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 32055, Wide belt sander - Veneer sanding - Solid wood - Intermediate lacquer sanding Dkedsyv H Akepfx Ag Dok With 2 sanding belts: - 1st belt: cross sanding - 2nd belt: longitudinal sanding with segmented pressure beam The machine is very well maintained and in good, ready-to-operate condition.

Condition: excellent (used), CATALOG NUMBER: 6145 TECHNICAL DATA - Maximum workpiece width: 1100 mm - Maximum workpiece height: 140 mm 3 units: 1) Calibrating grooved rubber roller – 15 kW 2) Calibrating grooved rubber roller – 11 kW 3) Calibrating grooved rubber roller – 11 kW From above: - Sliding metal roller - Sliding rubber roller - Unit - 2 sliding rubber rollers - Unit - 2 sliding rubber rollers - Unit - Sliding rubber roller From below: - Infeed table: 3600 x 1000 mm - Feed speed regulated via inverter 0.25 kW - Traction belt - 3 ejection sliding rubber rollers - Pneumatic belt oscillation with photocell control - Belt blowing - Electric table elevation adjustment – lifting motor 0.75 kW - Smooth feed speed control – feed motor 2.2 kW - With vacuum pump – pump motor 4 kW - Extraction port diameter: 110 mm, 80 mm - Operating pressure: 6-8 bar - Extraction connector diameters: 3×150 mm, 3×200 mm - Overall machine dimensions (LxWxH): 3400 x 2300 x 2800 mm - Feeder dimensions (LxWxH): 3000 x 1300 x 900 mm - Pump dimensions (LxWxH): 600 x 950 x 940 mm - Weight: approx. 5000 kg Net price: 39,900 PLN Net price: 9,500 EUR (depending on exchange rate of 4.2 EUR) Dsdox Rdf Sjpfx Ag Dskk (Prices may vary with greater fluctuations)

Condition: used, OTT Comet-2 1100 Wide belt sander Sanding width 1100 mm Machine is untested Service is recommended No warranty / No guarantee Ex stock Lieboch NET price € 1,900.00 Dkodpfx Aoywiyzsg Dek

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Condition: fully checked and serviced Dsdpfxew R Hh Uo Ag Djkk Equipment and technical data: - Incl. combination unit with contact roller and sanding pad - With height-adjustable contact roller for calibration - With air cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display unit for the electromotoric workpiece thickness setting - With automatic workpiece thickness adjustment - Extraction ports: 2 x 200 mm - Feed belt is ok; has a defect in one spot (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1987, Wide belt sanding machine Manufacturer: Samco Dodpexdnrgofx Ag Dskk Model: EG Year of manufacture: 1987 Sanding length: 3,000 mm Including spare sanding belts ä18326

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, machine/vehicle number: 0-001-747-312, Wide Belt Sander BÜTFERING, AWS-3E-1100, # 0-001-747-312, Year 1991 TECHNICAL DATA Maximum working width: 1,100 mm Maximum working height: 150 mm Abrasive belt width: 1,110 mm Dkjdpfxsyt Nvyo Ag Dek Abrasive belt length: 1,900 mm 1st Sanding Unit Profiled steel contact roller, D=200 mm Motor power: 15 kW 2nd Sanding Unit Combined contact roller and pad unit Profiled rubber-coated contact roller, D=150 mm Air-cushioned sanding pad Motor power: 11 kW 3rd Sanding Unit Pad sanding unit with electronically controlled segmented pressure beam Element width: 30 mm Co-running / counter-running Infinitely variable sanding belt speed (frequency inverter) Digital sanding belt speed display Motor power: 11 kW - Conveyor belt with continuously variable feed, 3 - 15 m/min - Vacuum table / vacuum clamping device, 11 kW - Rotating cleaning brush: 0.75 kW - Digital display of sanding height - Infeed roller table MACHINE DIMENSIONS Total length: 3,200 mm Total width: 1,850 mm Total height: 1,900 + 175 mm (extraction nozzle) Total weight: 4,100 kg

Condition: excellent (used), Wide Belt Sander SCM sandya 7 Dsdpfx Agsyx Dvyo Djkk Sanding width: 1100 mm 1st unit with metal calibration roller, 15 kW 2nd combination unit with rubber roller and pad, 15 kW Minimum electrical protection: 32A Pad with quick lift and drop function Pneumatic oscillation Variable feed speed Electric table height adjustment Table position display Pneumatic feed belt centering Robust sander, excellent sanding quality

Condition: used, Year of construction: 1983, Used machine Year of manufacture: 1983 Condition: completely checked + serviced, incl. new feed belt Features and technical specifications: - Incl. combination unit with contact roller and sanding shoe - With height-adjustable contact roller for calibration - With air-cushion pressure shoe controlled by the workpiece - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With a rotating cleaning brush at the machine's outfeed side - Belt oscillation via photoelectric sensor for automatic monitoring and regulation of the lateral belt position for even belt wear - With roller table at infeed - With digital display unit for the electric motor-driven workpiece thickness adjustment - With additional veneer sanding beam - With 2x spare sanding shoes - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Passage height: 150 mm - Main motor: 15 kW - Feed speed steplessly adjustable 2.5 - 12.5 m/min - Extraction connection 2 x 200 mm Dksdpfx Agswka T Sj Dsk Dimensions: approx. 2300 x 2000 x 2300 mm Weight: approx. 2300 kg Pictures show the machine in unrefurbished condition! Availability: approx. end of January 2026 Location: Röllbach

Condition: used, Used machine Dsdpfx Agjyq T H Ds Dskk Year of manufacture: 1987 Features and technical data: - Pneumatic sanding unit - Quick-change sanding shoe - Table size: 2800 x 1250 mm - Max. usable sanding length between machine columns: 2600 mm - Sanding width with table cross movement: 1000 mm - Clearance under belt, electric table height adjustment: 340 mm - Motor: 5.5 kW - Reversing switch for left and right belt run - Belt speed: 22 m/sec - Belt dimensions: 7800 x 150 mm - Extraction on left machine body: 1.1 kW, air output 1800 m³/h - Extraction nozzle: 180 mm Required space: 3950 x 2300 mm Weight: 900 kg Availability: short-term Location: 63934 Röllbach

Condition: ready for operation (used), Year of construction: 1977, functionality: fully functional, Langzauner LZG 1000/700/1400 long belt sander Dksdpfx Asr Axf Tog Dok large projection 1000 mm table dimensions 2500 mm belt dimensions 6800 x 150 mm right left run 2 belt speeds 11 and 22 m/sec vacuum clamping device lighting year of manufacture 1977 tested for functionality dimensions 3700 x 1200 x 1500 mm weight 950 kg price 2500.-

Condition: used, Year of construction: 1985, used cleaned, function checked, test run, partly revised, new ball bearing manufactured by Maweg type Saturn D built in 1985 Masch.-No. 85-12-018 number of band aggregates 2 piece number of Finishaggregate 2 piece motors 4 kW sanding width ca. 150 mm sanding height ca. 150 mm belt oscillation band blow out feed speed 4 - 16 m/min. belt length ca. 1800 mm Dodpfjvwfaljx Ag Dokk belt width ca. 200 mm height indicator  digital - mechanical Siko adjustment electrical fixed sanding pad 2-belt table height constant lateral moveable exhaust connection D 4 x 80 mm required space ca. l x w x h mm 2000 x 1200 x 2000 located in 97447 Gerolzhofen sale in current condition as seen - free on truck -

Condition: used, Sandingmaster brand calibrator model CSB/2/900, roller + pad, with 900 belt, roller motor of approximately 11 Kw, pad motor approximately 7.5 Kw. Used. Djdeiv Daujpfx Ag Djkk Sandingmaster brand calibrator model CSB/2/900, roller + pad, with 900 carpet, roller motor of about 11 Kw buffer motor about 7.5 Kw. Used.

Condition: used, Calibrator 1100, iron rollers and pad, used, tested. Worn conveyor belt. Dkedpsn A H Uxefx Ag Dsk

Condition: used, Year of construction: 1998, Brush polisher for elements brand Camam model C/1N/1S serial number 98001, year of construction 1998, CE marked Power supply 380V 4.5 Kw 13 Dodpfelagc Sex Ag Djkk Weight 530 Kg. Complete with declaration of conformity and installation and maintenance manual.