Condition: good (used), Code: 0026 Brand: GNT - ITALY Model: S 1300/2 Automatic cleaning machine for top and bottom surface cleaning of melamine covered panels, laminate, pvc, etc. Composition: Steel base Top and bottom cleaning unit composed of : dusting brush of special wire for dust elimination, wiping blade for residue cleaning, humidifyng group with one rubber and one milled metal roll, two brushes for finishing - reservoir for the cleasing liquid, recirculation pump made of stainless material Independent brush and felt rolls control to get back wearing down Motorvariator with continuous adjustment for advancement Motorvariator with continuous adjustment for humidifyng unit Brushes to clean the finishing felt rollers Residue collection tanks Emergency device to check thickness Technical data Working width mm 1300 Working height mm 6/80 Feed speed from 5 to 20 mt/min Working height mm 800 N° 3 dust hoods mm 150 Redpevw Uf Djfx Afnjt Installed power: Motorvariator for advancement Kw 0,37 - Motorvariator for humidifying group rollers each Kw 0,37 - Brush motor 1 Kw 0,75 - Absorbed power consumption Kw 17 Overall dimensions mm 2600 x 2280 x 1360 h Weight kg 2250

Condition: good (used), Code: 0424 Brand: DMC - ITALY Model: EUROPA 120 Automatic 2-belt calibrating sanding machine for wood, furniture, furnishings, wooden frames, doors, panels, composite materials and various Technical data: Sturdy construction Max working width mm 1200 Max working height mm 170 Rsdpfsv A Ta Dex Afnet Abrasive belt size mm 2200 x 1250 1° Group Rubber Calibrating Roller - Diameter mm 220 - Adjustable workpiece holding pressure brackets - Motor Hp 20 2° Group Finishing Pad with adjustable pressure - Motor Hp 10 Abrasive belt cleaning blowers Belt feed speed variator from 3,5 to 17,5 mt/min Vacuum table - Motor Hp 7,5 Automatic table lifting Automatic table positioning N° 2 suction inlets diameter mm 200 Working pressure 7 bar Overall dimensions mm 1900 x 1800 x 2100 h Weight kg 2500

Condition: used, Year of construction: 2006, Working width: 1100 mm Sanding belt dimensions: 1120 x 1900 mm Height: 1890 mm Length: 1335 mm Pass-through height: 3 - 150 mm Feed speed: 2.5 - 13 m/min. Extraction capacity: 1830 m³/h Extraction connection: 1x 180 mm Compressed air: 6 bar Drive motor: 15 kW Total connected load: 17 kW Weight: approx. 1500 kg Storage location: Supplier Rsdpfx Ajy Dd Ndjfnjt

Condition: used, Year of construction: 1997, incl. 3-roller feed, motor: 2.2 kW, electric oscillation, belt speed: approx. 22 m/sec, height-adjustable sanding table, table size: 1000 x 350 mm, infinitely tiltable sanding unit from 0 - 45°, angle scale and mechanical lock, foldable veneer edge sanding device, aluminum sanding shoe, height-adjustable radius sanding table, central extraction port: Ø 140 mm, sanding belt: 3000 x 150 mm. Storage location: Supplier. Rjdpsy Dd Igjfx Afnjt

Condition: used, Year of construction: 1987, Heavy-duty disc sander Model making machine with electric table tilt and digital display With approximately 20 additional sanding sheets Used, excellent condition, little used Make: L.A.R. Type: LVA D800 Year of manufacture: 1987 Machine no. 87-11-2 Many accessories Right table approx. 990 mm x 400 mm Tiltable/swivel +/- 35° electric with digital display Left table approx. 990 mm x 400 mm Tiltable/swivel +/- 35° electric with digital display Double-sided Disk diameter 800 mm New price approx. €20,000.00 Extraction connection D 140 mm Space required approx. 1500 mm x 1000 mm x 1600 mm Rsdpfxowi Rn Re Afnot Weight approx. 900 kg Storage location 97447 Gerolzhofen, free on load, unpacked Sold in as-is condition as seen No guarantee or warranty

Condition: good (used), Code: 0361 Brand: NERLI Model: PN 28 Semi-automatic sanding machine for wood, varnish, polyester, with 1 abrasive belt N° 20 pads with automatic lowering by means of selectors Table lenght mm 3000 Table width mm 950 Automatic table raising Electronic display Redpoy D T Eusfx Afnjt Inverter for belt speed Blowers for abrasive belt cleaning Main motor 20 Hp Table lifting motor 1 Hp Max working height 550 mm Belt dimensions mm 9650 x 150 Belt speed mt 25/sec Side support guide N° 2 suction outlets diameter 160 mm Overall dimensions: mm 4850 x 2000 x1850 h Weight kg 2000

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WEBER KSF-3-1350 (CMC) Fine/Cross Sanding Machine with 3 sanding belts for premium fine, veneer, and high-gloss sanding. Featuring a constant working height and configured as follows: Machine Frame Heavy-duty welded steel construction designed to accommodate 3 sanding units and workpiece cleaning components, such as workpiece air cleaning. Electrical control cabinet integrated into the frame. - Constant infeed height of 900 mm - Control and sanding belt change side is left in feed direction - Heavy-duty height adjustment via spindle lift gearing - High-quality transport table with conveyor belt - Stepless feed speed from 3–18 m/min, frequency controlled - Vacuum conveyor version with one vacuum blower, 5.5 kW, with a vacuum channel extending up to the machine’s upper edge - Safety systems compliant with CE standards - Electrical equipment conforms to VDE - Doors on both sides of the machine; on the belt change side with safety interlocks and sight window for monitoring belt oscillation - With one infeed and outfeed table with rubber-coated rollers Unit 1: Sanding units engineered for double-shift operation. - Belt run-off switches connected to oscillation monitoring on wide belts - Automatic sanding belt length compensation - Non-contact optical belt detection, self-cleaning, on belt change side - Oscillation adjustment on belt change side - Wear-free DC braking - Extraction hoods with optimal airflow to maintain TRK levels Unit 1: Cross-sanding unit with - Pressure lamella belt with felt and graphite for extended service life - ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blow-off unit Unit 2: CBF Combi Unit with - Grooved rubber contact roller, Ø 130 mm, rubber hardness 60 Shore - Cross-running lamella belt with separate 4.0 kW drive - ISA segmented pressure beam system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotation) - Workpiece-controlled oscillating sanding belt blow-off unit Unit 3: Cross-sanding unit with - Pressure lamella belt with felt and graphite for extended service life - ISD segmented pressure beam system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blow-off unit Control Control terminal: 'SIEMENS' MP 377 12" multi-panel - Graphical operator guidance via 12" color display - Program memory for 300 programs - Parameter setting via program - WANDRES Micro-Cleaning (single-brush version) Power sword brush with integrated micro-moistening of the linear brush (for optimal lacquer dust removal) Technical Specifications: Working width: 1350 mm Drive unit 1 (frequency controlled, Eco-Drive): 15 kW Drive unit 2 (frequency controlled, Eco-Drive): 20 kW Drive unit 3 (frequency controlled, Eco-Drive): 15 kW CBF drive: 3 kW Vacuum blower: 5.5 kW Feed drive (frequency controlled): 3.0 kW Height adjustment (frequency controlled): 3 kW Sanding belt speeds (frequency controlled): approx. 3–20 m/s Rsdpfxey A D Eio Afnjt Cross-belt dimensions (W x L): 2x150x5100 mm Wide belt dimension (W x L): 1370 x 2620 mm Workpiece thickness (min./max.): 4–140 mm

Condition: used, Year of construction: 2017, functionality: fully functional, We are offering this used HEESEMANN UKP 20 edge sanding machine, year of manufacture 2017. Manufacturer: HEESEMANN Model: UKP 20 Year: 2017 Condition: used If you have any further questions or require more information, please do not hesitate to send us a message or give us a call. If needed, the order confirmation with all technical details can be sent. 1 workpiece transport system – total length 5,015 mm – driven by a 1.5 kW three-phase motor, with double chain for workpiece transport Feed speed adjustable from 5 to 25 m/min, frequency-controlled, working height constant at 880 mm, including integrated control cabinets; Including adjustable stop ruler with digital readout and including counter fence with central width adjustment with central height-adjustable and laterally adjustable top pressure bar with digital display, which presses plate-shaped workpieces with ball-bearing rubber rollers (roller pitch 38 mm), including support rollers to extend the support for large workpieces, extendable sideways by approx. 1,500 mm. 4 side guide rollers between the sanding units for secure transport of strips 1 Industrial PC 3.0/4" LCD-TFT color display, 800 x 600 pixel resolution CF card 1GB Operating system: Windows Embedded Standard Redpfoy A D Ecsx Afnjt Touch-screen version with display for production and downtime periods. Ethernet connection available. 2 belt sanding units "M 4" – positions 1 and 2 for sanding straight edges, with intermittent belt blow-off device, belt break detector, tool holder with quick-change device, base plate for sanding tool, prepared for electronic path control for automatic engagement and disengagement of the sanding tool, operating in both climb and counter rotation. Belt dimensions: 2,300 x 80 mm Belt speed: 0/7–12 m/s Motor rating: 3.0 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 2 oscillation devices (positions 1 + 2) For optimal belt utilization 2 belt sanding units "K 4" – positions 3 and 4 incl. stand, for sanding small profile sections, also suitable for edge rounding; can be swiveled 90° upwards and 45° downwards, belt break detector, tool holder with quick-change device, base plate for sanding tool, intermittent belt blow-off device, prepared for electronic path control for automatic engagement and disengagement of the pressure tool, including climb and counter rotation, designed for manual adjustment and digital indicators for the adjustment axes. Belt dimensions: 2,000 x 50 mm Belt speed: 0.5–8 m/s Motor rating: 1.1 kW with electronic frequency control for stepless adjustment of the belt speed. Electronic sanding pressure control from the terminal. 4 electronic path controls for fully automatic, timed engagement and disengagement of the sanding tool depending on the set feed speed, sanding pressure, and angle position of the units. 2 steel tools for straight edges, equipped for air cushion sanding, incl. base plate, for 1 "M4" unit, item no. 9000191310 2 steel profile tools equipped for air cushion sanding, incl. base plate, for 1 "K4" unit, item no. 20000025684

Condition: used, sanding height 150 mm 390 mm Sanding paper width 400 mm engine tba Rjdpfx Aoyz Dfaefnot KED Type XXIII II4 single wood sanding machine for sanding and calibrating solid wood individual parts and smaller workpieces. The machine is suitable for precise sanding work in carpentry and furniture making and enables uniform surface finishing. Its robust construction makes it suitable for continuous use in woodworking.

Condition: used, Year of construction: 2007, functionality: fully functional, grinding width: 950 mm, grinding height: 170 mm, height adjustment type: electric, type of input current: three-phase, - Italian manufacture - year of manufacture: 2007 Rjdpfx Aexdxfqjfnjt - combination sanding shoe TECHNICAL SPECIFICATIONS: - sanding width: 950 mm - sanding height: 4–170 mm - motor power: 11 kW - 1st unit: steel drum with pneumatic engagement - drum diameter: 110 mm - 2nd unit: combination sanding shoe - pneumatic engagement for rubber drum: 78 Shore - shoe with pneumatic adjustment - pneumatic oscillation - air blast for belts - electric height adjustment - two belt speeds: 8.3 m/s and 16 m/s - electronic sanding height positioning - continuously variable feed speed: 4–20 m/min - minimum material length: 500 mm - extraction nozzle diameter: 2 x 140 mm - machine dimensions (L/W/H): 150 x 180 x 210 cm - weight: ~ 1010 kg

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Features and technical data: - Belt dimensions: 2600 × 200 mm - Work table: 935 × 460 mm - Auxiliary table at the belt tensioning roller: 350 × 350 mm (with contour sanding attachment) - Sanding mandrel with rubber drums, supplied with sanding sleeves in diameters of 30, 40, 50, and 60 mm - Oscillation (can be switched on/off), electromechanical with a separate, maintenance-free oscillation motor - Table height adjustment with handwheel, also adjustable relative to the sanding belt (front and back) - Sanding unit tiltable from -10° to 90°, tilting via handwheel with digital inclination display - Accurate angle precision via mechanical locking of the sanding unit - Motor power: 2.2 kW - Belt speed: 15 m/s - Feed console with 3-roller feed and veneer mechanism - Fast conversion from veneer to solid wood sanding - Height-adjustable idle roller table with adapter for dust extraction for sanding at the belt tensioning roller - Large mitre gauge with infinitely variable angle adjustment and movable ruler - Dust extraction: adapters Ø 100 mm on both sides (idle roller table, right and left extraction hood) - 2 power sockets 400 V on the machine stand (for machine and feed unit) - Torsion-resistant, heavy-duty steel frame for high running smoothness and stability - Large work table with sliding surface - Recess in the machine stand for pallet truck – facilitates internal transport Dimensions: 1700 x 1000 x 1100 mm Weight: approx. 415 kg Availability: short-term Rjdpfx Afjxwz I Ienjt Location: Röllbach

Condition: excellent (used), Year of construction: 2011, Profile Belt Sander, PS0 Rasprofil by Zimmermann with Extensive Accessories Belt sander with tilting table and additional fittings for rasping. Ideally suited for model making and mold construction. Designed for precision contour sanding. All settings made via clamping lever and fine adjustment. Drive motor: 400 Volt, 1.1 kW Table tiltable up to 45 degrees forwards and up to 20 degrees backwards Rjdsw Iqvqjpfx Afnot Machine table approx. 400 x 400 mm Upper extraction arm foldable for sanding large parts. By locking the freestanding profile rail in the upper machine section, high angular accuracy can be achieved. Includes three reversible profile rails (15, 30, and 40 mm, straight and radius profiles). Several sanding belts included, see photos Three unused rasps Extraction connection 80 mm Waldmann mounted work light Original paint, touched up in places CE marking Very well-maintained machine from prototype manufacturing in the motorsport department of a Wolfsburg automotive manufacturer. Apparent minimal previous usage. Dimensions approx. 600 x 850 x 1350 mm (LxWxH). Weight approx. 220 kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse. See 'other offers from this seller.'

Condition: used, Year of construction: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller Sanding pad 1st unit: electronic segmented shoe, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubberized contact roller, 65° Shore Sanding pad 2nd unit: electronic segmented shoe, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable 2 - 18 m/sec Belt cleaning unit: for 2nd unit Cleaning brushes: Yes Suitable for lacquer sanding: Yes Vacuum conveyor: Yes Rodpoytrf Rofx Afnot Feed speed: infinitely variable from 2.5 to 13 m/min Control: touch-screen Elect./pneumatic belt oscillation: yes Infeed height: fixed (top section moves) Table display: digital Working height / feed table height: 900 mm Motor power: 36 kW Location: Supplier

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Grinding belt width: 1370 mm Grinding belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed speed: 2.5 - 13 m/min (infinitely adjustable) Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Storage location: Nattheim Rodsytrfkjpfx Afnst

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: Used - ready for operation Description Wide Belt Sander Condition: Function tested – Working width: 1300 mm – Cross sanding unit with belt blowing device – Longitudinal sanding unit with infinitely variable speed and belt blowing device – Calibration roller, can be engaged via the control system – Vacuum conveyor belt – feed speed infinitely variable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC controlled - EA dedusting machine, high-pressure blow-off unit with rotating nozzles and ionization for statically charged dust Location: ex stock 54634 Bitburg - Immediately available Rodpex N A Aaofx Afnjt - Free loaded

Condition: good (used), Radii from 2 mm to 12.5 mm. Expandable up to 25 mm. 45° bevels up to 16 mm wide. Workpiece support extendable up to 380 mm. Optional feed system available. You will receive an invoice with VAT shown separately. Price applies ex stock Haldensleben. Rodpfx Afow Sw Syonet

Condition: excellent (used), functionality: fully functional, CALIBRATING SANDING machine model DMC TECHNOSAND TC 1350 RRP second hand machine CE standard : YES machine composed by 3 belts ( 3 independent motors ) 1° belt : Roller 2° belt : Roller 3° belt : electronic Sectioned Pad vacuum unit for table Rsdpfx Aoyrrr Ujfnot maximum working width mm. 1350 volt. 380/50

Condition: used, Code: 0354 Brand: JET/USA Model: DDS 225 - CE Standard Automatic 2-roller calibrating sanding machine for wood, furniture, joinery, custom made furniture, panels, wooden joinery, plastics and various materials – CE Standard Features: Sturdy construction Outfeed roller adjustment independent of the infeed roller Hard rubber coating on the rollers Rjdpfoy A Synox Afnot 2-speed conveyor belt Working width 635 mm Min workpiece length 230 mm Min workpiece height 0,8 mm Max workpiece height 133 mm Roller dimensions 152 x 635 mm Roller rotation speed 1400 rpm Conveyor belt speed 2–3 mt/min 2 suction inlets diameter 100 mm each Power output 5 Hp Enclosed base with door Abrasive belt 80 gr Abrasive belt 100 gr Overall dimensions mm 1150 x 1150 x 1050 h Weight kg 330

Condition: good (used), Code: 0351 Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sanding machine for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 110 Min working length mm 100 Variable-speed belt feed 5–30 m/min – Motor Kw 1,5 Tilting oscillating sanding unit – 2-speed motor 700–1400 rpm – Power 2 Hp Pneumatic belt tensioner – Timed entry and exit of the pad Mechanical oscillation of abrasive belt 0/20 mm Lifting and tilting via handwheel with special key Removable support for large panels Abrasive belt dimensions 80 x 2450 mm Suction inlet diameter 100 mm Rodpfxsy A Sq Te Afnet Compressed air 5–6 atm Overall dimensions mm 2600 x 1400 x 1500 h Weight kg 720

Condition: excellent (used), Catalogue number 7976 TECHNICAL SPECIFICATIONS - Max working width: 1100mm - Max working height: 160mm 2 units: 1) Grooved rubber roller for calibration 2) Pneumatic shoe + 2 metal rollers – From above: - 2 slip metal rollers - Pressure device - Working unit - 2 slip metal rollers - Working unit - 2 slip metal rollers - Cleaning brush – From below: - 2 slip rubber rollers - Feed belt - Pneumatic belt oscillation with photocells - Electric table lifting - 2 feed speed options - Operating pressure: 8-10bar - Extraction port diameter: 2x200mm - Total power: 30kW - Overall dimensions (L/W/H): 2230x2020x2050mm - Weight: approx. 3000kg Rsdpfx Afjy E Iycjnot ADVANTAGES – German-made – 2 working units – Used sander, in very good condition Net price: 16,900 PLN Net price: 4,000 EUR depending on the 4.2 EUR exchange rate (Prices may change with major fluctuations)

Condition: good (used), Year of construction: 1988, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 32055, Wide belt sander - Veneer sanding - Solid wood - Intermediate lacquer sanding With 2 sanding belts: - 1st belt: cross sanding - 2nd belt: longitudinal sanding with segmented pressure beam Redpfx Asyv H Akjfnjt The machine is very well maintained and in good, ready-to-operate condition.

Condition: good (used), Code: 0098 Brand: MINIMAX SCM Rjdpfx Aoy Au Disfnot Model: LS 3000 - CE Standard Belt sanding machine with double goose neck - with 3 motors - CE Standard Table length mm 3000 Table width mm 1100 Automatic table lifting stroke mm 580 2-speeds belt motor Sanding belt lenght mm 8100 Pulleys diameter mm 250 Belt width mm 150 Manual pad mm 150 Gooseneck depth mm 820 Overall dimensions: mm 4150 x 1500 x 1600 h Weight kg 485

Condition: new, Year of construction: 2026, functionality: fully functional, Edge sanding machine KSO 150 F PRO NEW Note: The milling table has minor scratches on the tabletop Scope of delivery: Rodpfx Aoyxqtfjfnst Sanding belt K 100, 5 x rubber rollers ø25, ø30, ø40, ø45, ø50 mm, 6 x sanding sleeves K80 ø25, ø30, ø35, ø40, ø45, ø50 mm, Tool kit, Mitre fence Sanding unit pivotable via hand crank, Machine stand made of welded steel, Oscillating sanding belt with separate gear motor, Oscillation can be switched on or off as required, Sanding pad with graphite coating, Height-adjustable sanding table, Auxiliary table with extraction ports, Sanding sleeve setup with attached work table, Adjustable stops 2 pcs extraction ports ø100 mm, Work table size: 950 x 450 mm, height adjustment 110 mm, 400 V, motor power 2.2 kW, oscillation motor 0.11 kW, Sanding belt length 2640 mm, width 150 mm, Belt speed 14 m/s, Sanding surface length 800 mm, width 150 mm, Oscillation stroke 15 mm, Sanding unit swivel range 0-45° Machine dimensions 1750 x 1050 x 1200 mm, Weight 310 kg RRP (list price) €11,050 Available at short notice Transport possible at extra charge!

Condition: new, Year of construction: 2024, Sanding belt size: 150 x 2280 mm Engine power: 2,2 kW Abrasive belt oscillation Rsdsdq H D Sepfx Afnst pneumatic belt tension Swiveling grinding unit 90 ° / 180 ° Additional table on pulley

Condition: used, Working width 1.350 mm Number of sanding units 2 st. Workpiece thickness max. 150 mm Multi-purpose surface sanding machine Heesemann type MFA 6 Impression Q2 - LF for precise surface, veneer, lacquer and intermediate sanding in woodworking. The machine is suitable for solid wood, coated workpieces and sensitive surfaces in furniture and interior finishing. The infinitely variable feed rate and vacuum clamping ensure a clean and even sanding pattern. Available from week 33/2026 Rjdpeyyc Drefx Afnst