Condition: excellent (used), Year of construction: 2007, operating hours: 592 h, Calibration and fine sanding automatic machine, wide belt sander with electronic segmented sanding pad and lacquer sanding capability A video of the machine in operation can be provided upon request. Ideal sanding machine for interior finishing companies, also suitable for intermediate lacquer sanding. Single belt machine with combination unit and electronic segmented pressure beam, edge segments can be switched on and off Segment width of the pressure beam: 35mm Contact roller pneumatically adjustable, low wear thanks to grooved steel roller Grit compensation Drive motor 7.5kW with automatic motor brake, infinitely variable belt speed controlled by frequency converter from 2 - 18 m/s Feed belt speed infinitely adjustable via frequency inverter from 2.5 - 13m/min Pneumatic, workpiece-controlled belt blow-off device Cleaning brush at the outfeed Constant working height at 900mm by adjustment of the machine's top section, making it integrable into sanding lines Feed belt is still very grippy and in excellent condition Maximum sanding width approx. 1090mm Workpiece height approx. 3 to 150mm Standard sanding belt size 1120 x 1900mm 3 rubber-coated pressure rollers Infeed roller table and foldable outfeed table Kodpeym Du Rjfx Aalelp Preparation for vacuum blower. The conveyor belt is perforated, and a plug for an optional blower is available. Alternatively, the conveyor can also be connected to an extraction system. Extraction connection: 1 x 180mm, 1 x 140mm, and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine operation. Parameters: belt speed, feed speed, workpiece height, pressure beam application points front and rear, edge segments, belt blow-off nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE mark Operating manual (Delivered) without the connection cable shown Original paint, only repainted in a few areas Approx. 592 operating hours, about 40 minutes per week on average. Dimensions approx. 1800 (with table 2600) x 1800 x 2150mm (LxWxH). Weight approx. 2200kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available from our warehouse, see 'Other offers from this provider.'

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 4,200 kg, Fine and smoothing sanding machine Heesemann, model: FGA 6 For intermediate lacquer sanding, wood surface smoothing, and sanding of foils The machine is fully functional, well maintained, and in very good technical condition. The conveyor belt has been replaced. Sanding width: 1300 mm Working height: 880 mm, constant Maximum workpiece thickness: 3–80 mm Transport bed: with individual transport belts Drive: 2.5 kW three-phase motor, including blow-off unit Feed speed: 4.5–22 m/min, adjustable Units Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Bristle material: Fibre Longitudinal sanding unit Continuous electronic adjustment of the sanding belt speed via frequency inverter Wear-free brake unit Pneumatic belt tensioning Intermittent belt blow-off device Infrared belt control Counter-rotating sanding belt Sanding belt dimensions: 2620 x 1350 mm Belt sanding speed: 0.3–12 m/s Drive power: 11 kW Graphical operator terminal for inputting machine settings, including numeric thickness adjustment and displays for fault sources, workpiece throughput, and feed speed Electronically controlled pressure beam Control roller spacing: 40 mm Pneumatic belt tensioning The pressure beam's contact surfaces automatically adjust to the shape of the passing workpieces Workpiece vacuum hold-down system: Fan with 5.5 kW drive power Operator side and terminal: left Operating voltage: 400 V, 50 Hz Space requirements: 2550 x 2220 x 2300 mm Kljdpfx Aaeya I Iujljp Weight approx.: 4200 kg (Technical specifications are subject to change and errors, as well as prior sale.)

Condition: excellent (used), functionality: fully functional, grinding width: 1,350 mm, overall weight: 5,500 kg, working height: 880 mm, Wide belt sanding machine with cross and longitudinal unit for sanding, among other things, veneer before lacquering. The machine is fully functional, well-maintained, and in very good technical condition. The conveyor belt has been renewed. Sanding width: 1300 mm Working height: 880 mm constant Workpiece thickness max.: 3–140 mm Transport bed: with individual conveyor belts Drive: 3.0 kW three-phase motor, including extraction device Feed speed: 4.5–22 m/min, adjustable Units: cross/longitudinal/brush Brush roller unit: centrally height-adjustable Diameter: 150 mm Drive power: 1.5 kW Brush material: fibre 1. Cross sanding unit Kjdpfsya I Riex Aalslp - Wear-free brake system - Pneumatic belt tensioning - Belt run monitoring - Pressure lamella belt system, intermittent belt cleaning device - Sanding belt dimensions: 4900 x 150 mm - Belt sanding speed: 12 + 24 m/s - Drive power: 13 / 17 kW 2. Longitudinal sanding unit - Infinitely variable electronic control of sanding belt speed via frequency inverter - Wear-free brake system - Pneumatic belt tensioning - Intermittent belt cleaning device - Belt control: infrared - Sanding belt in counter-rotation - Sanding belt dimensions: 2620 x 1350 mm - Belt sanding speed: 0.3 – 12 m/s - Drive power: 11 kW Graphical operating terminal for entering machine settings, including numerical thickness adjustment as well as fault source, workpiece passage, and feed speed display Electronically controlled pressure beam Roller spacing: 40 mm Pneumatic belt tensioning The contact surfaces of the pressure beam automatically adapt to the shape of the workpieces passing through Weight approx. 5500 kg Space requirement approx. 2550 x 2675 x 2400 mm

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, grinding height: 100 mm, overall weight: 500 kg, grinding width: 300 mm, 3-sided profile sanding machine / brush sanding machine Manufacturer: Loewer Model: MultiMaster LZ 3 Compact 3-sided sanding machine for mouldings, facade boards, profiled timber, etc. The machine comes from a flooring and panel manufacturing facility. Year of manufacture: 2006 CE mark Working width: 300 mm Max. pass-through height: approx. 100 mm Fitted with 4 sanding brush units: Klsdpfjyinw Uox Aaljp - 2x from above - 1x from the left - 1x from the right Spindle diameter: approx. 30 mm Max. brush diameter: approx. 300 mm Brush speed infinitely variable Feed rate infinitely variable, max. approx. 16 m/min Voltage: 400 V, 50 Hz, 3-phase On-site circuit protection: 20 A Weight: approx. 500 kg

Condition: good (used), Code: 0330 Brand: FBR Model: L 85/1500 - CE Standard Automatic belt sanding machine with double gooseneck for wood, joinery, furniture, window frames, aluminum, metals, and various materials - CE Standard Klsdpjyu Ttrsfx Aalop Technical data: Work surface dimensions mm 1450 x 700 Automatic table lift Vertical stroke mm 750 Motor power 3 Hp three-phase Max belt length mm 4500 Belt width mm 120/150 Suction port diameter mm 100 Overall dimensions mm 2550 x 1250 x 1550 h Weight kg 320

Condition: used, Year of construction: 2005, Number of belts: 2-belt Max. pass-through height: 150 mm Max. working width: 1350 mm 1st unit: combined sanding unit Design of 1st unit: steel contact roller Sanding pad 1st unit: electronic segmented shoe, 35 mm Abrasive belt length 1st unit: 1900 mm Abrasive belt width 1st unit: 1370 mm Abrasive belt speed 1st unit: 18 m/sec 2nd unit: combined sanding unit Design of 2nd unit: rubberized contact roller, 65° Shore Kledpsytrf Rjfx Aalep Sanding pad 2nd unit: electronic segmented shoe, 35 mm Abrasive belt length 2nd unit: 1900 mm Abrasive belt width 2nd unit: 1370 mm Abrasive belt speed 2nd unit: variable 2 - 18 m/sec Belt cleaning unit: for 2nd unit Cleaning brushes: Yes Suitable for lacquer sanding: Yes Vacuum conveyor: Yes Feed speed: infinitely variable from 2.5 to 13 m/min Control: touch-screen Elect./pneumatic belt oscillation: yes Infeed height: fixed (top section moves) Table display: digital Working height / feed table height: 900 mm Motor power: 36 kW Location: Supplier

Condition: used, Year of construction: 2002, Grinding width: 1350 mm Grinding belt width: 1370 mm Grinding belt length: 1900 mm Workpiece thickness: 3 - 150 mm Feed speed: 2.5 - 13 m/min (infinitely adjustable) Drives: Grinding unit: 15 kW Total connected load: 17 kW Weight: approx. 2400 kg Dimensions: 2000 x 1850 x 2100 mm Storage location: Nattheim Klodsytrfkopfx Aalsp

Condition: used, total length: 3,700 mm, total width: 1,000 mm, total height: 1,700 mm, overall weight: 800 kg, oscillation stroke: 30 mm, grinding belt length: 1,500 mm, grinding belt width: 150 mm, power: 6.5 kW (8.84 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 2,800 rpm, No. 04513 Profile grinding machine / automatic edge processing machine Rehnen KBA Used Profile grinding machine / automatic edge processing machine for grinding edges, milling profiles, and grinding profiles in a continuous process. The machine also has a corner copying milling machine. The materials to be processed are solid wood, chipboard, and MDF. Material thickness 10 - 65 mm Material length min. 50 mm Material width min. 60 mm Feed speed 8 m/min Ksdpfx Aoytd Tmjalolp Total power 6.5 kW Equipment: - Oscillating edge sanding device (sanding belt dimensions 150 x 1500 mm / 1400 and 2800 rpm / oscillation stroke 30 mm / contact roller and sanding shoe) - Upper milling unit - Lower milling unit - Corner copying milling machine / corner rounding milling machine - Bottom profile sanding device - Top profile sanding device - Feed chain conveyor with top pressure Incl. technical documentation Incl. 6 used profile belts (must be refitted) Transport dimensions approx. 3700 x 1000 x 1700 mm LWH Weight approx. 800 kg To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Condition: used, turning speeds 450 / 700 / 1.400 U/min transmission ratio 3 output 0,2 / 0,5 / 0,6 kW current 0,6 / 1,0 / 1,1 A table surface area 540 x 390 mm 0 380 V / 50 Hz chuck RÖHM / 165 mm Brush diameter 235 mm dimensions 0,80 x 0,44 x 1,13 mm Kljdpfsym D Abjx Aalsp Brushing Machine HAHN & KOLB - UVM Type 2 - incl. braking system

Condition: good (used), Year of construction: 2008, functionality: fully functional, HESSEMANN 3-HEAD SANDER: Abrasive belt dimensions: 2,620 x 1,400 mm 1 Longitudinal sanding unit Klsdpfjx Rdn Tex Aaljp (with contact roller for calibration work (steel)) Roller diameter: 250 mm Belt speeds: approx. 18 m/s 22 kW Anti-wear braking unit, automatic band length adjustment Dust extraction system controlled depending on the workpiece, counter-rotating abrasive belt, abrasive belt grit compensation by computer Belt speeds: 1.0 - 18 m/s Drive: 15 kW 1 Longitudinal sanding unit Belt speeds: 1.0 - 18 m/s Drive: 15 kW Includes continuously adjustable sanding speed via electronic frequency inverter, with double number of extraction holes for the dust extraction device. Anti-wear braking unit, automatic band length adjustment for abrasive belt edges potentially of different lengths; dust extraction controlled by workpiece detection, deactivatable, counter-rotating abrasive belt. 2 Pressure beams with selective pressure adjustment system – CSD® system Continuously adjustable individual pressure elements, for single and multiple workpiece feeding. Spacing: 32 mm. Tolerance compensation for workpieces up to 2 m by maintenance-free pressure magnets. Working width as well as start and end positions of the pressure beam are electronically adjustable. The pressure elements are driven by lifting electromagnets capable of continuously varying the force of each sanding pad as the workpiece passes through the machine. This innovative CSD® technology guarantees constantly proportionate pressure relative to pad overlap on the workpiece. The risk of sanding through on the edges is virtually eliminated by this dynamic, continuous pressure force control.

Condition: new, Year of construction: 2026, Kündig Perfect-2 1350 RED-L Wide Belt Sander incl. Intermediate Lacquer Sanding Configuration Special price for exhibition machine - showroom model - Klsdpek Dpp Sefx Aalsp - Robust, space-saving wide belt sander for the highest standards - Constant working height due to upper part adjustment - Working width: 1350 mm - Overhead sanding, with 2 sanding units - Serrated rubber contact roller in proven hardness - Infinitely variable height adjustment of the contact roller according to grit scale - Electric lifting/lowering of the contact roller depending on unit selection - Electronically controlled segmented sanding pad - Entire sanding pad unit tiltable by 10° - Parallel spring-loaded, ground steel pressure roller at the infeed - Rubberized pressure roller between the sanding units and at the outfeed - 2 motors: 18.5 kW and 11 kW, 400 Volt, 50 Hz - Motorized precision height adjustment with digital readout - Belt tension, control, and oscillation pneumatically operated Compressed air consumption approx. 2 l/min - Optimum safety thanks to automatic instant stop with disc brake in case of belt breakage, etc. - Workpiece feed 2.2 kW with conveyor belt and drive roller - Vacuum system for the entire working table with additional perforation of 200 mm for smaller workpieces - Automatic thickness setting across the entire working width - Workpiece over-thickness protection with instant feed stop and lift-off automation - Stepless adjustment of material removal - Electronic feed control on operator panel, infinitely variable 3 - 15 m/min - PLC control with teach-in memory - Pneumatic conveyor belt control - Workpiece support with rollers at infeed and outfeed - Enormatic: fully automated quick setup and feed activation - Eco energy saving mode - Error diagnostics - Pass-through height 210 mm up to 18.5 kW - Sanding belt size 1350 x 2000 mm Perfect - Features: High-quality swiveling Plexiglas control panel - 10'' touch screen - Industrial control system - Automatic pressure regulation and storage of sanding pad elements - Electronic compensation for sanding belt grit size - Job and operating hours counter Lacquer Equipment: - Infinitely variable sanding belt speed on 2nd unit - Cleaning nozzles for the sanding belt of the 2nd unit, controlled by use - Electronic sanding pad with 22 mm segment width - Additional sanding pad insert Additional options included with this machine: Fold-down outfeed table extension (without panel) C10) LED package ASB5+AS3) ECS workpiece air blow-off with fan Location: 54634 Bitburg - Immediately available -

Condition: used, Year of construction: 1997, Used machine Year of manufacture: 1997 1 Belt sanding machine with combination unit with electronic segmented pressure beam for sanding soft and hard veneers Calibrating and fine sanding of solid wood Calibrating workpiece carrier boards Sanding defective veneers and lacquers Intermediate sanding of PU, hydro, UV, nitro, and polyester coatings Sanding barrier films with graphical control terminal NC-controlled thickness adjustment from 3 to 150 mm Calibrating roller can be activated via terminal Kedpfx Asyulfmjalolp with patented CSD segmented pressure beam for compensation of workpiece tolerances up to 2 mm Sanding width: 1100 mm Abrasive belt length: 2150 mm Abrasive belt speed, frequency-controlled: approx. 2–18 m/sec Sanding unit drive: 15 kW Feed speed: 5/10 m/min Compressed air: 6 bar Compressed air requirement: 15 NL/min Belt blasting: 490 l/min Extraction connection: 180 mm Air requirement for sanding unit: 1800 m³/h Required air velocity: 20 m/sec Total power connection: approx. 17 kW Weight: approx. 2000 kg Dimensions (W x D x H): 1840 x 1670 x 2200 mm Availability: short-term Location: Röllbach

Condition: used, Working width ca. 1.300 mm mm Number of sanding units 2 st. Workpiece thickness max. ca. 150 mm engine 18,5 & 15 kW Kündig ENORM 1300-2 wide belt sander for precise calibration and fine sanding of solid wood, veneer, and wood-based materials. The robust industrial design with two sanding units and cleaning brush enables high removal rates and precise surface quality in furniture and interior construction. Ideal for craft and industrial businesses with high quality standards, including sanding belts. Kedpfeypwarox Aaljlp

Condition: used, Year of construction: 1997, functionality: limited functionality, - Oscillation defective Kodpfsyi Ug Aex Aalolp - Main switch replaced - Machine is operational - Sold without warranty

Condition: ready for operation (used), Year of construction: 1994, Wide Belt Sander HEESEMANN KSM 8 CSD incl. EA2 Year of manufacture: 1994 Condition: used – ready for operation Description Wide belt sander Condition: Functionally tested – Working width: 1300 mm – Cross sanding unit with belt blow-off device – Longitudinal sanding unit with infinitely variable speed and belt blow-off device – Calibration roller, activatable via control panel – Vacuum conveyor belt – feed speed infinitely adjustable – Satin finishing roller – Brush roller – Machine settings and pressure control system CNC-controlled - EA dust extraction machine: High-pressure blow-off system with rotating nozzles and ionization for removal of statically charged dust Location: ex client site - Immediately available - Kjdpfx Aaox N A Aaoljlp Machine must be dismantled by the customer and collected at short notice

Condition: used, used Klodeyvvr Uopfx Aaljp 2-belt sander 1x with continuous pneumatic pressure feed 1x sanding unit 100 mm vacuum clamping device Manufacturer: Heesemann Type: BA2 Machine no. 7304051 Motor: 7.5 / 11 kW Sanding length approx. 2550 mm Sanding width approx. 100 / 150 mm Belt length approx. 8500 mm Table size approx. 2550 x 1350 mm Throat (right) approx. 600 mm Upper belt cover Table lighting Vacuum clamping device with pump 9 vacuum suction plates Belt speeds 710 / 1430 m/min Sanding shoe 2450 mm Extraction connection D 180 / 250 mm Required space approx. 4500 x 1400 x 1800 mm Weight approx. 1500 kg Total connected load approx. 12.5 kW Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as seen, as inspected, without warranty or guarantee

Condition: used, Year of construction: 2000, used, top equipment, excellent condition, low hours Manufacturer: Johannsen Model: T94 Year of manufacture: 2000 Kljdpfx Aoyvvr Ijaljp Machine no.: 22138 CE type tested GS wood dust tested Motor: 5.5 / 0.25 kW Sanding length: approx. 2600 x 960 mm Sanding width: approx. 960 mm Belt length: approx. 7800 x 150 mm Table size: approx. 2790 x 960 mm Throat depth right: approx. 850 mm Electric adjustment Upper belt cover Upper sanding support Table lighting Belt speeds: 1434 m/min Right-left travel Belt blow-off Sanding shoe: 300 x 140 mm Extraction connection: D 180 mm Required space: approx. 4000 x 1500 x 1500 mm Weight: approx. 1000 kg Total connected load: approx. 5.7 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Year of construction: 1988, operating hours: 1,437 h, functionality: fully functional, machine/vehicle number: 32055, Wide belt sander - Veneer sanding - Solid wood - Intermediate lacquer sanding With 2 sanding belts: - 1st belt: cross sanding - 2nd belt: longitudinal sanding with segmented pressure beam Ksdpfxoyv H Ako Aalolp The machine is very well maintained and in good, ready-to-operate condition.

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 38947, Machine available at the end of March/beginning of April 2026 incl. extraction nozzle Workpiece thickness: 3 - 150 mm Feed speed: 4/8 m/min Abrasive belt oscillation contactless (photo-electric) - 1st unit (calibrating) Drive motor: 11 kW Steel sanding roller D=140 mm Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Abrasive belt grit compensation Extraction nozzle D=180 mm - 2nd unit (calibrating/fine sanding) Drive motor: 11 kW Sanding roller hardness approx. 90° Shore Abrasive belt grit compensation 2 pcs stationary and flexible contact air shoes Workpiece infeed control Abrasive belt speed: 16 m/sec Abrasive belt dimensions: 1130 x 1900 mm Extraction nozzle D=180 mm - 3rd workpiece cleaning brush Extraction nozzle D=140 mm Klsdpfx Aaeyrtriolsp Feed table pneumatically adjustable (spring-loaded/fixed) Front and rear table extension

Condition: excellent (used), CATALOG NUMBER 7324 Technical Specifications: - Max workpiece width: 200 mm - Max workpiece height: 190 mm 2 sanding units: - Top: steel roller + pad + steel roller - Bottom: steel roller + pad + steel roller Top: - 2 pressure rollers, rubber, feed - sanding unit - idler roller - 2 pressure rollers, rubber, feed Bottom: - sanding unit - side guiding rail - electronically adjustable sanding height 0.37 kW - 6 feed speeds + forward/reverse: 2.25; 4.5; 9; 12.5; 18; 25 m/min - feed motor 0.6 kW - main motors 2 x 4 kW - extraction port diameters: 80 mm, 90 mm - overall dimensions (L/W/H): 1830 x 860 x 1760 mm - weight: 630 kg Kljdpfox S I Nqsx Aalep – unpainted – used sander, in very good condition Net price: 11,500 PLN Net price: 2,730 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Year of construction: 2014, condition: used, machine/vehicle number: 753.04.14, Equipment: - Brush grinding machine with rotating grinding brush belt Kodpfxsxrb Rfe Aaljlp - Motorized height adjustment of the grinding unit, adjustment range from approx. 0 - 80 mm, freely programmable via machine control. - Operating side in the direction of travel, right - Rotating brush set consisting of 174 segment brushes, length 1,300 mm. Segments are easy to change and are inserted into the brush belt from the side. - With vacuum conveyor belt - With cleaning roller for the feed belt Technical data: - Working width: 1300 mm - Max. part thickness approx. 80 mm (depending on the abrasive coating) - Working height: 850 - 900 mm - Year of manufacture 2014 - Feed continuously adjustable, 3 m/min-10 m/min - Machine length: 3860 mm - Machine width: 2400 mm - Machine height: 2000 mm - Paint finish in RAL 7035, light gray with - Contrast color green - Voltage: 400V/50HZ - Electrical connection 16kW/36A - Machine weight: approx. 2600 kg

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data:- Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s Kljdjyh Hwuopfx Aalsp - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: used, Technical data: Kledpfx Aevvbqwjaljp - Manufacturer Leif & Lorenz - Working width max. 1,200 mm - Brush diameter *160 mm - Suction connection D100 mm - Year of manufacture 2005 - Motor power 0.37 kW - Location, in stock in Blomberg - Also available for assembly with roller or belt conveyor

Year of construction: 2002, condition: used, machine/vehicle number: 200212102, Technical data: - Manufacturer: Heesemann - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers Kledpfx Aaoyffrnslsp - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized -Without own control (A new control can be offered as an option) - Location: Blomberg camp

Condition: used, Year of construction: 2009, Dust removal brush with spiral brush, suitable for installation on an existing transport system. - Manufacturer: Venjakob Ksdouulpqopfx Aalslp - Height adjustable via a hand wheel - Working width: 1,300 mm - Total width: 2,450 mm of the brush unit - In stock in Blomberg - Voltage/Hz: 400/50 - Extraction system required on site - Extraction nozzles, 2 pcs - Diameter: 120 mm each - Volume flow: approx. 2,000 m²/h - Machine without control cabinet and frequency converter (Optionally available) - Without roller conveyor, only the brush machine