Used Roll benders (motor-driven) for sheet thickness over 14mm for sale (116)

Condition: good (used), functionality: fully functional, Year of construction: 2007, roller (bottom) diameter: 260 mm, roller (top) diameter: 280 mm, roller diameter: 260 mm, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 18 mm, sheet thickness steel (max.): 18 mm, sheet thickness aluminum (max.): 18 mm, sheet thickness brass (max.): 18 mm, sheet thickness copper (max.): 18 mm, overall weight: 7,000 kg, power: 10 kW (13.60 HP), cone diameter: 10 mm, type of input current: three-phase, working length: 2,500 mm, Equipment: documentation/manual, emergency stop, Hydraulic plate bending machine 4-roll capacity 2500x18 mm thickness Brand MG model MH2518 Year 2007 Bending capacity with pre-pinch plate width 2500 mm thickness 18 mm pre-bend 14 mm --- Max width on the rolls 2600 mm top roll size 280 mm lower roll 260 mm minimum bending rolling dia. Ø 330mm Power electric 15Hp voltage 380/50 Vac --- Installed configuration Hardened rolls, high surface resistance Driven central rolls rotation hydraulic with gear unit Rolls parallelism lifetime with torsion bar Hnedpfou Ecq Ijx Aacsu Pre-pinch pressure adjustable for best pre-bend Conical plate rolling hydraulic with contrast pad Drop-end top roll front hydraulic opening unload Re-rolling calibration system for welded shells Digital readout display position of rollers Safety and emergency systems installed Manuals and schematics originals

Condition: ready for operation (used), functionality: fully functional, Plate rolling machine, 3000 mm capacity, H. Vuillot 3000 mm, used machine Manufacturer: H. Vuillot Sheet capacity: 3000 x 27 mm Hjdpfswcqpnjx Aacenu Top roll diameter: Ø445 mm Bottom roll diameter: Ø330 mm Year: 1972

Condition: new, sheet thickness: 20bending length: 2100upper roll diameter: 300 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting Hnedpod Ab R Nsfx Aacju - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation  - metarial feeding table  - oil coiler  - center support  - side supports  - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2023, roller (bottom) diameter: 410 mm, roller (top) diameter: 450 mm, roller diameter: 410 mm, working width: 3,000 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 50 mm, sheet thickness brass (max.): 60 mm, sheet thickness copper (max.): 60 mm, overall weight: 23,000 kg, total length: 58,000 mm, total width: 21,000 mm, total height: 25,000 mm, power: 22.06 kW (29.99 HP), outer diameter: 520 mm, type of input current: three-phase, working length: 3,100 mm, Equipment: documentation/manual, model capacity 3000x40 mm Digital readout Hydraulic 4 roll plate bending machine plate thickness rolling 40 mm pre-bend 32 mm minimum rolling diameter ID 520 mm plate max width on the rollers 3100 mm top roll size 450 mm Power on hydraulic unit 30Hp Vac 400/50 -480/60 Hnedpfx Aaeq Uk A Toceu Installed configuration Hardened rolls Conical plate rolling with digital position bending readout Electric control joysticks roll bending Digital position readout rolling save & repeat Hydraulic rotation central rolls driven parallelism lifetime with torsion bar. ( no electronic ) Pre-pinch load adjustable for pre-bending . Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality nr.1 Vertical Support hydraulic run 3 ton capacity to support large shell dia up to 4 meters ( see photo ) ----- Predisposed ready add-on accessories: CNC controller programmable 4 axis automatic plate roll, digital touch screen readout position of the 4 rolls for use manual-semiautomatic-fully automatic programmable with storage memory, network connect predisposed industry 4.0

Condition: new, sheet thickness: 16bending length: 3.100upper roll diameter: 330sheet length: 3.100 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll Hnedpfx Ajd Ab Rzsaceu - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Hjdpfx Ajwb Scmsaconu Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: new, sheet thickness: 20bending length: 3100upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle Hnjdpfxod Ab Rve Aacou - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- - center support EURO 13.600,-- - side supports EURO 9.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, Capacity plate width 3000 mm plate thickness 22 mm prebend 18 mm minimum rolling diameter ID 400 mm and above. dual initial pinch planetary technical data: -length of rolls 3100 mm -top roll dia. 350mm -lower roll dia. 330mm -Hydraulic power unit with 20Hp motor -Electric supply Vac 400/50 – 480/60 Configuration complete: -Hardened surface of the 4 rolls -Conical plate bend hydraulic attachment. -driven rolls rotation powered with gear unit axial hydromotor -Synchronized hydraulic power dragging . -front open drop-end to remove closed shells. -Calibration re-rolling feature for welded shells Safety configuration in compliance. Control console electric commands with digital readout ----- Predisposed ready add-on accessories: -NC controller programmable 4 axis automatic plate roll, digital 7" touch screen readout position of the 4 rolls for use manual-semiautomatic-fully automatic programmable with storage memory, network connect predisposed industry 4.0 -nr. 1 central hydraulic support for large diameters up to 4 mtrs ID -nr. 1 side arm hydraulic to hold in place the plate sheet being formed Hodpfx Aeid Al Nsacsnu

Condition: new, sheet thickness: 35bending length: 4100upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 6.940,-- - metarial feeding table EURO 5.100,-- - oil coiler STD - center support EURO 18.750,-- - side supports EURO 17.000,-- - Automatic material extractor Hnsdpfx Asd Ab N Ioacou - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: used, functionality: fully functional, Year of construction: 1980, machine/vehicle number: plate roll 2500x45 mm, roller (bottom) diameter: 500 mm, roller (top) diameter: 500 mm, roller diameter: 500 mm, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, overall weight: 40,000 kg, type of input current: three-phase, working length: 2,500 mm, Equipment: emergency stop, 3 roll mechanical plate bending machine 2500 x 45 mm brand Ferro Italy model CIT-23 Capacity: Plate width 2500 mm Plate thickness 45 mm Prebend 38 mm Diameter of bending 2000 mm Capacity 2500 x 35 mm for diameter 750 mm mechanical plate roll with pre-pinching upper roller size 500 mm side rollers size 500 mm left/right side independent vertical pinching prebend power installed to run each of the side roller 40 Hp electric motor rollers rotation centralized gear unit powered electric Hp 45 dual speed rotation fast/slow voltage 3 phase 380/50 Machine weight 40 Ton Hedpfjv Eyrrsx Aacjnu open front drop-end hydraulic to unload the closed shells top roll hydraulic tilt-up wide opening to unload the formed plate console with push buttons electric to control the machine position readout of bending rollers for repeatability of rolling works emergency stop buttons and safety shut down system all around the machine Electric power units with all wiring new rebuilt. Overhauled new bushings and bearing fully controlled and replaced

Condition: new, bending length: 2100sheet thickness: 30upper roll diameter: 360 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Hsdpfed Ab S Esx Aacenu Options: - variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 13.600,00 Side supports EURO 9.060.00 We have many references!

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: MG07100H, roller (bottom) diameter: 450 mm, roller (top) diameter: 480 mm, side roll diameter: 450 mm, roller diameter: 600 mm, roller length: 750 mm, working width: 700 mm, working height: 1,800 mm, sheet thickness (max.): 100 mm, sheet thickness steel (max.): 100 mm, sheet thickness aluminum (max.): 100 mm, overall weight: 20,000 kg, total length: 3,600 mm, total width: 2,500 mm, total height: 2,760 mm, power: 36.77 kW (49.99 HP), cone diameter: 600 mm, type of input current: three-phase, working length: 700 mm, Equipment: documentation/manual, emergency stop, 3roll plate bending machine year 1999 make MGsrl model 750x100 mm Thickness bending capacity 100 mm Width max 750 mm planetary hydraulic roll bending machine with pre-pinching Top roll size 480 mm Side rolls size 450 mm Voltage 380/50 Vac, 50 Hp motor electric power installed on hydraulic unit Configuration: hardened surface of the 3 rolls Hnsdpfx Ajv A Iwqeaceu 3 rolls power driven planetary gearbox and hydraulic motor each roll independent Calibration system for the re-rolling of welded shells. Set of rings to clamp on rolls for align and guide the plate sheet Console electric on wheels with centralized commands joysticks and digital readout. Opening front side hydraulic drop-end to unload closed shells. Variable speed working slow/fast Emergency stop and safety systems installed in compliance with regulation. Dimension 3600x2500 mm v height 2760 mm Weight 20 Ton Machine in good working condition , controlled and tested.

Condition: new, sheet thickness: 25bending length: 2100upper roll diameter: 330 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 4.681,-- - metarial feeding table EURO 3.400,-- - oil coiler EURO 1.040,-- Hedpfed Ab R Dsx Aacsnu - center support EURO 13.600,-- - side supports EURO 8.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 3ROLL3000X50MM, roller (bottom) diameter: 460 mm, roller (top) diameter: 500 mm, roller diameter: 500 mm, roller length: 3,100 mm, working width: 3,000 mm, sheet thickness steel (max.): 50 mm, overall weight: 26,000 kg, type of input current: three-phase, working length: 3,000 mm, Equipment: documentation/manual, emergency stop, model 3 roll planetary with pre-pinch 3000x50 mm upper roll size 500 mm CAPACITY plate width 3000 mm plate thickness 50 mm prebending 36 mm diameter rolling 2200 mm performance on plate quality 355 MPa Hnjdpfx Asvr S S Reacou ---- reducing plate width 2000 mm capacity thickness 55 mm --- minimum diameter of rolling 600 mm all the accessories installed hardened rolls conical attachment digital position readout power installed 50 Hp weight of the machine 26Ton

Condition: new, bending length: 2100sheet thickness: 16upper roll diameter: 270 Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: variable rotation speed EURO 4.682.00 Material feed table on request Oil cooler EURO 1,040.00 Center support EURO 8.250.00 Hodpod Ab Tfefx Aacenu Side supports EURO 5.700.00 We have many references!

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, machine/vehicle number: AK316, roller (bottom) diameter: 270 mm, roller (top) diameter: 300 mm, roller diameter: 350 mm, roller length: 3,100 mm, working width: 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 16 mm, sheet thickness aluminum (max.): 16 mm, sheet thickness copper (max.): 16 mm, overall weight: 8,000 kg, total length: 4,500 mm, total width: 1,300 mm, total height: 1,500 mm, type of input current: three-phase, working length: 3,100 mm, Equipment: documentation/manual, emergency stop, 3roll 3000x16 mm MG MODEL AK316 plate bending machine Surface width 3100 mm -Top roll 300 mm -Side rolls 270 mm Hedpov Agkpefx Aacsnu -Power electric 10 Hp -Weight 8 ton Capacity -plate width 3000 mm -plate thickness 16 mm -pre-bend 12 mm Rolling diameter from 350 mm and above Configuration complete for use: -the 3 rolls hardened high surface strength -the 3 rolls driven hydraulic with axial planetary gear individual each roll synchronized rolling speed hydraulic automatic balance -conical bending attachment for cone bending -re-rolling system for seam welded shells -console centralized with hydraulic commands -Digital position readout to repeat bending with accuracy -Safety installations with emergency stop. -Manuals of instruction DIMENSION 4500X1300XH1500 MM Machine in very good conditions

Condition: new, sheet thickness: 70bending length: 2100upper roll diameter: 540 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting Hodpjd Ab N Sjfx Aacenu - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 6.940,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 19.500,-- - side supports EURO 10.400,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: documentation/manual, emergency stop, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness Hedpfxjwfc S Ts Aacsnu -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: new, sheet thickness: 45bending length: 3100upper roll diameter: 480 Technical specifications: Hnsdpod Ab Rcefx Aacju - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 45bending length: 2100upper roll diameter: 430 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 3.506,-- - oil coiler   STD. - center support EURO 13.600,-- - side supports EURO 9.600,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) Hedsd Ab Rnepfx Aacsnu We have many references!

Condition: new, bending length: 3100sheet thickness: 45upper roll diameter: 510 Technical specifications: - Hardened and polished rolls Hnedpfx Aajd Ab Snsceu - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO  - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.150,-- We have many references!

Condition: new, bending length: 4100sheet thickness: 25upper roll diameter: 460 Hodod Ab Spepfx Aacsnu Technical specifications: - Hardened and polished rolls - Conic bending device - Digital readout for side rolls - Complete body made of ST-52 Steel - Portable control panel separated form machine - Rolls are mounted with bearings - Top roll cover, openable and closeable by hydraulic, controlled from control panel. - All rolls are driven by hydraulic motor and planetary gearbox - Side rolls upwards downwards movements are hydraulic powered Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO  - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 15.400,-- We have many references!

Condition: new, sheet thickness: 40bending length: 3100upper roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- Hedpfxjd Ab Rfo Aaconu - oil coiler STD - center support EURO 18.750,-- - side supports EURO 15.000,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 35bending length: 3100upper roll diameter: 460 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.325,-- - metarial feeding table EURO 3.896,-- - oil coiler STD. - center support EURO 12.058,-- Hjdpfx Aasd Ab Rgsconu - side supports EURO 11.258,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!

Condition: new, sheet thickness: 50bending length: 2600upper roll diameter: 510 Technical specifications: - Hardened and polished rolls - Complete body made of ST-52 Steel - Machine have 4 rolls and designed for symmetrical working principle - Hydraulic powered cover for easy material extracting Hedpfxjd Ab Ras Aacenu - Digital readout for side rolls (2 digital readout) - Side rolls are free for rotation and upwards downwards movements are hydraulic powered - Top and bottom rolls are driven by hydraulic and gearbox. Bottom roll’s vertical movements are hydraulic powered - Separate control panel form machine - Conic bending device - In accordance for CE norms Options: - variable speed of rotation EURO 5.858,-- - metarial feeding table EURO 5.100,-- - oil coiler STD. - center support EURO 18.750,-- - side supports EURO 12.750,-- - Automatic material extractor - PLC control - CNC control - Automatic material loading system - Changeable top roll - Adjustable bottom roll support system (for customer’s special requests) We have many references!