Technical data:
Vtwfbi
- max. working width 1040 mm
- max. material thickness 3 mm
- roller diameter 96 mm each
- stroke 70 mm
- rear roller + bottom roller adjustable for conical bending
- top and bottom roller motor driven
- working speed right + left 6 m/min
- drive 400 V / 1,5 kW
- space requirement approx. W 1850 x H 1200 x D 870 mm
- weight approx. 800 kg
- with: - asymmetric roller arrangement
- bending
- swing-out upper roller
- E- foot switch for clockwise and anti-clockwise rota...
Sheet metal rolling mill ISITAN MRM-S 25-180 manufactured in 2014.
Technical data :
- rollers: 3-roller
- working width: 2550 mm
Bflowpntvp
- top roller diameter: 180 mm
- pre-rolling: 3 mm
- bending thickness: 4 mm
- thickness without bending: 5 mm
- minimum rolling diameter: 270 mm
- main engine power: 4 kW
- reverse engine power: 1.5 kW
- machine dimensions (LxWxH): 4150 x 950 x 1300 mm
- machine weight: 3050 kg
XZMP 20 x 2000 mechanical 3-roll bending.
Year of prod. 1989 (CZECH REPUBLIC).
Max. thickness of the bent detail 20mm.
Mqkrh
Max. the thickness of the rolling 32mm deatal.
Max. detail width 2000mm.
Diameter of the upper roll 400mm.
Main engine power 30kW.
Total power 76kW.
Hydraulic system pressure 40bar.
Dimensions (length X width X height) 7600 x 2860 x 2500mm.
Weight 34600kg.
working width: 1030 mm
metal sheet thickness: 1 mm
upper roller-Ø: 60 mm
below roller-Ø: 60 mm
Iw8bipcy0
weight: 170 kg
space needed: 560 x 1570 x 1080 mm
working lenght 2.550 mm
roller diameter 180 mm
max. thickness 5 mm
machineweight 5,8 ton
Cw07d7qm
incl. conic rolling
incl. flat and pipe rolling possible
Parameters:
- Max. length of rolled sheet of 3000 mm.
- Max. bending thickness of 16 mm.
- Max. thick roll of 22 mm.
3i38rmbpn
- Minimum diameter roll of about 450-500 mm.
- The diameter of the upper roller 420 mm.
- The diameter of the rollers is 405 mm lower.
- Installed power of 20 kW.
- Machine weight: 21800 kg.
- Machine dimensions: 5760x2150x2140 mm.
working width: 1050 mm
Njw93ychg
metal sheet thickness: 1,5 mm
upper roller-Ø: 70 mm
below roller-Ø: 70 mm
weight: 320 kg
space needed: 700 x 1300 x 1100 mm
Offered from a bankruptcy is a ready to use 3-roller bending machine
Manufacturer Fasti
Model 104-10-2.5
Built in 1991
Masch.Nr. 9114046
Bef9cwpu3h
Technical data:
Performance 1020 x 2, 5m
Motor brake
Before return by foot switch
man. Delivery of the rollers
Top roller swivel
Roll diameter: 90mm
Emergency-off per rope
380 volts
Weight approx. 400kg
Bending rolls independently adjustable, for double pre-bending capability on the leading and trailing end of symmetrical profiles
Lateral guide rolls with three-dimensional adjustment
Modular rolls that allow the bending of most profiles
Nppax
Year of manufacture: 2016
Cap max: 70mm.
Diameter of rolls: 245 mm.
Power output: 4,9 kW
Rolling speed: 6,1 m/min
Weight: 1520 kg.
Ex works, including belongings, spares and manual. Directly available.
working width: 1030 mm
metal sheet thickness: 1 mm
upper roller-Ø: 60 mm
Zxy8p9m
below roller-Ø: 60 mm
weight: 170 kg
space needed: 560 x 1570 x 1080 mm
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
-Max. Sheet width: 1030 mm
-Max. Sheet thickness: 1.25 mm
-Roller diameter below: 50 mm
-Top roller diameter: 50 mm
T077pwo9u
-Delivery: via handwheels
-Dimensions: 1600/550/H480 mm
-Weight: 150 kg
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
-Spare part top roller
-Drawing with the pictures
-Max. Sheet width: 2060 mm
Zaxdot3i3
-Max. Sheet thickness: mm
-Roller diameter: 141 mm
-Bearing diameter: 75 mm
-Transport dimensions: 2690/141/H141 mm
-Weight: 290 kg
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
-Transfer in current condition as seen
-Machine has a crack in the sprue, but this does not affect its function
-electrically driven
-Max. Sheet width: 2020 mm
Bc2o3nalaf
-Max. Sheet thickness: 8.0 mm
-Roller diameter below: 190 mm
-Upper roller diameter: 150 mm
-Delivery via: transmission
-Dimension...
Three-roll round, three-roll sheet metal bending machine, bending machine, sheet metal bending machine, 3-roll round bending machine, profile bending machine, three-roll sheet metal rolling machine
-electric: powered
-Max. Sheet width: 2030 mm
Nljgh
-Max. Sheet thickness: 5.0 mm
-Roller diameter below: 142 mm
-Upper roller diameter: 142 mm
-Delivery via: spindles
-Upper roller can: be swiveled to bend (bend without approach)
-Dimensions: 2550/820/H1395 mm
-Weight: 1460 kg
shaft diameter 50 mm
Roll diameter 155 mm
Delivery time prompt, subject to prior sale
shaft diameter: 50 mm
roller diameter: 155 mm
Driven rollers: 2
Motor power: 1,5 kW
Speed: 4,5 m/min
Bending capacity (cross-section / min. diameter):
flat iron upright: 60x10 mm / 500 mm; 40x10 mm / 400 mm
Flat bar lying: 100x15 mm / 450 mm; 60 x 10 mm / 350 mm
Dh9ro8t7
Quad wheel steel: 35x35 mm / 900 mm; 20x20 mm / 300 mm
Round steel: Ø 35 mm / 600 mm; Ø 30 mm / 400 mm
tube: Ø 70x2 mm / 1,000 mm; Ø 30x2 mm /...
Manual three roll round bending machine make FASTI type 103-20-1.5
Machine # 9113030 Year of construction 1991
Technical data:
working length 2040 mm
max. sheet thickness 1,5 mm
roll diameter 100 mm
weight approx. 740 kg
outer dimensions approx. 2500 x 980 x 1400 mm
with
- swing-out upper roll
- lower and rear roller adjustment with hand wheel
little used, in very good condition
Nmrft
Sheet rollers STROJARNE PIESOK XZC 3000/25 built in 1980 in Czechoslovakia.
Technical specifications :
- sheet width: 3000 mm
Bfw702njjm
- sheet thickness: 25 mm
- winding speed: 7.5 m / min
- upper and lower roll diameter: 430 mm
- side rollers diameter: 340 mm
- minimum rolled up: 600
- rolling machine weight: 36000 kg
Plate bending roll machine XZMP 3150/16
Producer: Stroje a zariadenia Piesok s.r.o.
YP: 1982
Max. Sheet thickness ... 16mm
Bleaching width ... 3150mm
Number of rolls ... 3
Drive ... Mechanical
Main motor power ... 30kW
L x W x H ... 8700 x 2150 2350mm
Bo0ya0ahpe
Machine weight ... 40000kg
Max. Sheet thickness ..... 3150 mm
The machine is in good condition, possible to test under power.
shaft diameter 80 mm
Roll diameter 260 mm
Delivery time approx. 6-8 weeks from order placement
shaft diameter: 80 mm
Roll diameter: 260 mm
Driven rollers: 3
Bdsjttpwyc
Motor power: 7,5 kW
Speed: 6 m/min.
Bending capacities (cross-section / min. diameter):
flat bars upright: 80x15 mm / 800 mm; 40x10 mm / 400 mm
Flat iron lying: 125x25 mm / 600 mm; 60x8 mm / 400 mm
Quad wheel steel: 45x45 mm / 500 mm; 15x15 mm / 350 mm
Round steel: Ø 50 mm / 600 mm; Ø 15 mm / 350 mm
Tube: Ø 100x2.5 mm / 1,200 mm; ...
Technical data:
- max. working width 1040 mm
- max. material thickness 2 mm
- max. material thickness with bending at 1.5 x Owd. 1.75 mm
- max. material thickness with 5 x top roller diameter 2.5 mm
- Roll diameter 80 mm each
- stroke 70 mm
- rear roller + lower roller adjustable for conical bending
- Upper and lower roller motor driven
- Working speed right + left 6 m/min
- Drive 400 V / 1.1 kW
- Space requirement approx. W 2050 x H 1200 x D 700 mm
- Weight approx. 800 kg
- with: - asymmetrica...
Nominal power: 3000x22/18 mm
top roller: 370 mm
Btwgdyv
bottom roller: 340 mm
side rollers: 270 mm
Drive power: 25 HP
Power supply: 400 V/50 Hz
Including hardened rolls, cone bending package, oil cooler, Easy Roll CNC control
Price on request.
Machine is delivered with commissioning and training in German.
We are DAVI trade and service partner for North, West and East Germany.
Technical data:
- max. working width 3030 mm
- Max. plate thickness 2 mm
- roller diameter 140 / 160 mm
- stroke of the rear roller 120 mm
- Working speed 4 m/min
- Drive - brake motor 400 V / 3.0 kW
- Space requirement approx. W 1750 x D 800 x H 1100 mm
- Weight approx. 2.9 t
- with - asymmetrical roller arrangement,
- Annex
- Back roller tiltable,
- Hinged bearing for swinging out the top roller
- Right + left rotation
- separate control panel
Pqfkqzx2
sheet width 3050 mm
plate thickness 3,0 mm
pre-bending 2,0 mm
roll diam. toproll 160 mm
Ben8f2okag
min. dia. 240 mm
engine output 4,75 kW
weight 2.650 kg
range L-W-H 4.850 x 720 x 1.050 mm
sheet width 2540 mm
plate thickness 3 mm
pre-bending 3 mm
diameter of upper rolls 150 mm
Drive 4 kW
weight of the machine ca. 2 t
dimensions of the machine ca. 3,25 x 0,9 x 1,13 m
Ff3bi9jc0
Condition: ready for operation
Electric 380 Volt
Foot switch f. Rechts & Linkslauf
Asymmetrical roller arrangement, crowned rollers,
Rear roller adjustment and bottom roller adjustment by handwheel,
Starting and finishing rounds in the machine, electr. Safety control with
emergency stop wire, top rol...
sheet width 2500 mm
plate thickness 3 mm
pre-bending .
Bozuovfz2z
total power requirement kW
weight of the machine ca. 4 t
dimensions of the machine ca. 5x2x1,5 m
sheet width: 1500 mm
Bht3mpgo
plate thickness: mm
pre-bending:
plate thickness: ca. 3,0 mm
distance between columns: 1645 mm
roll dia. top roll: Ø 110 mm
roll dia. bottom roll: Ø 110 mm
weight of the machine ca.: auf Anfrage t
dimension machine xH: 2,5 x 0,6 x 1,0 m
further technical features:
- bending roll adjustment course 100 mm
Operation takes place via control panel.
Technical data:
-Manufacturer: Binmak
-Type LBS 1050x130
-Country of origin: Turkey
-Bj. 2020
-working area approx. 1050x5,5mm
-round rolling up to 5,5mm possible
-the rollers are hardened
-with digital display
-with electric rear roller
-suitable for conical rolling
-with foot pedal
-Electric approx. 2.2 kw
-own weight approx. 1220Kg
-roller diameter: approx. 130mm
-machine with cast iron housing
-Laterally swivel out top roller
-Mobile control panel and foot pedal separate from the machine
Bhg...
sheet width 3070 mm
plate thickness 4 mm
pre-bending 3 mm
diameter of upper rolls 190 mm
min. bending diameter 285 mm
total power requirement 5,5 KW
weight of the machine ca. 4,3 t
Ocxb2
dimensions of the machine ca. 4,75 x 1,12 x 1,38 m
- Bending capacity 3070 x mm
working width: 1030 mm
metal sheet thickness: 3 mm
metal sheet thickness when bending:
upper roller-Ø: 90 mm
below roller-Ø: 90 mm
weight: 500 kg
Cxn37av
space needed: 2000 x 740 x 1250 mm
Technical data:
-Manufacturer: Binmak
-Type 3-LBS 1270x140
-Country of origin: Turkey
-Bj. 2020
-working area approx. 1250x5,5mm
-round rolling up to 5.5mm possible.
-the rollers are hardened
-with electric back roller
-with digital display
-for conical rolling
-with foot pedal
-Electric approx. 2.2 kw
-own weight approx. 1220Kg
-roller diameter: approx. 140mm
-machine with cast iron housing
-Laterally swivel out top roller
Cqqdeovd8
-main engine with braking device
-Mobile control panel and foo...
sheet width 2500 mm
plate thickness 4 mm
pre-bending 3 mn
number of rolls 4 Walzen
diameter of upper rolls 180 mm
roll diam. bottom roll 150 mm
speed 5,0 m/min
total power requirement 5,5 kW
weight of the machine ca. 3,8 t
dimensions of the machine ca. 4,4 x 1,39 x 1,4 m
Basic equipment:
- Conical bending device
- Swiveling top roller
- Electrically adjustable rear roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emergency leash
- CE certi...
sheet width 3000 mm
plate thickness 4 mm
pre-bending 3 mn
number of rolls 4 Walzen
diameter of upper rolls 200 mm
roll diam. bottom roll 180 mm
speed 6,0 m/min
total power requirement 5,5 kW
weight of the machine ca. 4,85 t
Bly3rpfjdu
dimensions of the machine ca. 4,9 x 1,39 x 1,4 m
Basic equipment:
- Conical bending device
- Swiveling top roller
- Electrically adjustable rear roller
- Conical bending device
- driven top roller
- Pre-bending device
- brake motor
- Safety device emergency leas...
sheet width 1050 mm
plate thickness 3,3 mm
pre-bending 3,0 mm
roll length 1050 mm
Beoanmiqhw
roll diameter 90,0 mm
min. dia. 130,0 mm
engine output 1,1 kW
weight 570 kg
range L-W-H 1.800 x 800 x 1.130 mm
sheet width 1860 mm
plate thickness 0,75 mm
pre-bending ja
upper roll diameter 68 mm
work speed 2 m/min
length of draw-in 500 mm
diameter of lower rolls ca. 90 mm
weight of the machine ca. 700 kg
B7zqdstl
dimensions of the machine ca. 2,45 x 0,7 x 1,1 m
Electric 380 Volt
Special reflector plate bending machine with automatic curve control
(templates) with
asymetric roller arrangement, hydraulic rear roll adjustment and three roll
drive. During automatic operation sequence a sensor valve o...
Ref. -No.: 10030
Brand: STÖLTING
Type of control: CNC
Control: Meier Modul SA 515
Storage location: Mülheim an der Ruhr
Country of origin: Deutschland
Top roller: 670 mm
Bottom roller: 600 mm
Usable length: 2500 mm
Sheet width: 2500 mm
Sheet thickness: 60 mm
Stretch limit: 360 N / mm²
main engine: 2 x 55 kW
Actuator: 18,5 kW
Bale length: 2600 mm
Cylinder diameter: 250 mm
Cylinder pressure: 278 bar
Rolling force: 5450 kN
Bending stress: 66 N / mm²
Deflection: 0,67 mm
Inquire. Torque: 430658 Nm
In...
sheet width 2000 mm
plate thickness 13 mm
pre-bending 7
upper roll diameter 250 mm
diameter of lower rolls 250 mm
Bjq8wbpux3
total power requirement kW
weight of the machine ca. 9 t
dimensions of the machine ca. 7,5 m
sheet width 1300 mm
Btiobxua
plate thickness 4,5 mm
pre-bending -
diameter of upper rolls 90 mm
diameter of lower rolls 120 mm
2,2 kW
weight 660 kg
dimensions of the machine ca. 2,0 x 1,2 x 1,4 m
unused 3-Bowl-Bending machine,
enables conical bending by adjustment of the lower rolls,
operation by foot pedal,
hardened rolls,
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.