Three rolls bending machine 3000 x 40 mm

FACCIN HAV 3145

Year of construction: 2024, condition: new, New mechanical and electromagnetic clutches and brakes for Bulgarian machine tools of the following types: CU400, CU500, CU502, CU580M, CU582, C11MT, C11MB, C11, C13B… We also offer a wide selection of various spare parts for the above-mentioned machine tools, most of which are available from stock, while for the rest we offer the fastest possible delivery times. We cordially invite you to cooperate! Rcodpsv Rpn Tefx Almeb

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault Redpfetv H Ucsx Almocb in the electrical system.

Year of construction: 1991, condition: like new (used), overall weight: 1,420 kg, rotational speed (max.): 1,485 rpm, 3 stainless steel volute casing pumps in process design 2 x CPK-CM 250-315 built in 1991 1 x CPKN-C1 250-315 year of construction 2011 !!! Price per piece !!! Pumps were operated on a test bench and all have very few operating hours! See pictures !!! Flow rate: 1001 m³/h (278 liters / second) Delivery head / delivery pressure: 18 m / 1.8 bar Pump speed: 1485 1/min NPSH: 5.00 m Shaft seal: single mechanical seal with sealing water Manufacturer: Burgmann Impeller type: closed centrifugal impeller Impeller diameter: 324mm Bearing type: roller bearing Lubrication type: Oil Lubricant monitoring Oil level controller Materials: 1.4408 (AISI 316) Pump housing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Bearing bracket lantern: Gray cast iron JL1040 Shaft sleeve: CrNiMo steel Nominal diameter of suction nozzle: DN 300 Discharge connection Nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure pressure side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without intermediate sleeve Base plate: Painted gray cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 1/min Frequency: 50 Hz Rsdpfxeqabiao Almjcb Rated voltage: 400 / 690 V Rated motor power: P2: 75 kW Thermal class: F Motor protection class: IP55 Cosphi: 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 82,500 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 65 m/min, feed rate Y-axis: 65 m/min, feed rate Z-axis: 65 m/min, spindle speed (max.): 20,000 rpm, rapid traverse X-axis: 65 m/min, rapid traverse Y-axis: 65 m/min, rapid traverse Z-axis: 65 m/min, torque: 63 Nm, overall weight: 90,000 kg, Equipment: rotational speed infinitely variable, First commissioning: 2008 Redpfxexl R Hvj Almecb Control system: Heidenhain iTNC 530 incl. HR420 handwheel X-axis: approx. 5,000 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,750 mm A-axis: -120 / +95° C-axis: ±360° Maximum workpiece dimensions 3,800 mm (X-direction) 1,800 mm (Y-direction) 1,150 mm (Z-direction) 5-axis machining is possible in a single setup with a 300 mm long tool (A-axis at 90° swivel). Machine operating hours: approx. 82,500 h Total spindle hours: approx. 36,500 h Clamping table No machine table is included in the delivery. However, we are happy to offer a customer-specific solution at extra cost. 2-axis fork-type milling head 5 Spindle power: 20 kW Spindle speed: max. 20,000 rpm Torque: max. 63 Nm Tool holder: HSK 63A Tool release: hydraulic Holding torque (clamped) A & C axis: 2,000 Nm Drives, linear axes Feed rate X, Y, and Z axis: up to 65 m/min Axis acceleration X, Y, and Z: up to 5 m/s² Connection data Voltage: 400 V Frequency: 50 Hz Power requirement: 130 kW Dimensions, weight Space required machine without peripherals: approx. 7,500 x 8,500 x 6,600 mm Total weight: approx. 90,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 5002 aquamarine blue Additional equipment - Minimum quantity lubrication - 50-fold tool changer - Work area enclosure Optionally available at extra cost: - Renishaw RMP60 probe - BLUM LaserControl NT mini Condition of the machine Fully functional, in very good condition. Can be inspected under power until April 2026.

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rodov U Ea Hopfx Almocb Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. VACAM CNC Control. Short piece removal.

Condition: used, Year of construction: 2015, Vertical CNC machining center with 3 controlled axes and exceptional Y-axis machining capacity. It is equipped with a vacuum table clamping system that holds plates and sheets with the help of vacuum. This solution is particularly effective when machining thin parts that are difficult to fix using conventional clamping systems. The machining center is equipped with a set of valves that allow you to turn on or off different table zones, thus concentrating the vacuum in a specific area and optimizing the clamping of small components. Possibility of performing interpolated milling and drilling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Tekna provides user-friendly software that can be operated by both experienced CNC programmers and less experienced users. The TKE 783 is a machining center with 3 controlled axes for interpolated drilling and milling in composite panels, aluminum, steel or titanium sheets and aluminum profiles. Technical specifications: Model: Tekna TKE783 Year of manufacture: 2015 Power: 29 kW Dimensions of the machining table: 2010 x 6300 mm Weight: 4842 kg Speed: X axis 70 m/min; Y axis 55 m/min; Z axis 30 m/min Software: Windows, Embedded, Teach-in software CAD/CAM 2D NC TOOL Made in: Italy Rodpov D A Imofx Almecb Other: aluminum milling up to 4 mm was worked on. The machine is connected, you can see how it works and test it in Estonia. It will be ready for transportation in April-May. If you have any additional questions, we will be happy to answer them.

Condition: new, Year of construction: 2023, sheet width 1540 mm plate thickness 4 mm Rcedpfx Asvx Uvxslmob upper roll diameter 110 mm diameter of lower rolls 110 mm bending roll diameter 110 mm total power requirement 1,1 kW weight of the machine ca. 0,9 t dimensions of the machine ca. 2,5x0,6x1,1 m New machine Cone bending equipment, hardened and ground rollers, motorized bending roller stationary control panel, digital display bending roller right and left, digital display bottom roller

Condition: like new (used), Year of construction: 2024, load capacity: 1,200 kg, Equipment: foot remote control, 1200 kg load capacity welding positioner, CE certificate. Very robust design. Infinitely variable speed from 0.05 to 0.7 rpm, higher speed available on request. Turntable diameter 1200 mm. Tilting up to 120°. Height horizontal 950 mm, tilted to center 720 mm. Hand and foot remote control. Dimensions: length 1.35 m x width 1.2 m. Rjdpfed A Etujx Almocb

Year of construction: 1965, condition: used, pressure 150 t throat 550 mm stroke 10 - 140 mm table surface area 1180 x 980 mm no. of strokes 40 Hub/min dayligth 500 mm ram surface 1040 x 800 mm ram adjustment 70 - 150 mm tool shank hole (depth x diameter) 435 x 55 mm required power 15 kW Rcsdpfjcubatex Almeb weight of the machine ca. 12 t dimensions of the machine ca. 3 x 1,7 x 3 m - with additional brake - slide weight compensation - motorized slide adjustment - central grease lubrication (manual) - table mounting plate - safe for manual inlay work

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Rcodpfevbcxtjx Almeb Movie available