Condition: as good as new (ex-display), Year of construction: 2016, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Dkelqshtm E Nj Nx Shel Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: good (used), 4 x eccentric press Ebu / Weingarten consisting of the following types: 1 x Ebu 15 1 x Ebu 25 2 x Ebu 35 1 x Weingarten A 40 Delq Nsq Rdr Tox Shjkl The machines can be inspected on site.

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, Any accessories can be discussed on site Delq Nxov Naq Ae Shjkl

Condition: new, pressure capacity 100 t max. stroke 380 mm passage between the uprights 1100 mm cylinder diameter 220 mm diameter of piston rod 90 mm diameter of piston head 120 mm pressing speed 2,47 mm/s Feed speed 7,54 mm/s retraction speed 9,06 mm/s Motor power 2,2 kW Machine dimensions L x W x H 1665 x 865 x 2140 mm Weight 970 kg Accessories / special features: - Movable cylinder - Chrome-plated, tempered piston with unscrewable base - Integrated pressure gauge Dkjlqshauyye Nx Shel - Pressure control - Two speeds and regulating valve - Adjustable work table - Joystick for piston operation - Hand pump with double operation for high precision pressing work - CE-compliant Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D-44143 Dortmund - Wambel

Year of construction: 2018, Condition: excellent (used), PH-15 PRO Hydraulic press - 2018 Agme 2018 model in very good condition. AGME hydraulic presses incorporate important new features: - Low-maintenance hydraulic cylinder. - Electronic movement sensor - Viewing window for cylinder course adjustment - Cycle counter and operator alarms - S7-200 programmable automaton, etc. Dolq Nxjizrh Dj Shjkl MODEL: PH-15 Pro Maximum force KN: 150 Maximum return force KN: 15 Maximum course mm 200 Working pressure min/max bar: 30/265 Approach speed mm/sec: 300 Working speed mm/sec: 32 Return speed mm/sec: 330 Motor power Kw: 6 Voltage V / Hz: 230/400-50 Power circuit V DC: 24 Maximum tool dimensions mm: 630x300x390 Maximum tool weight at head kg: 30 Table dimensions mm: 480X400 “T” dimensions mm: M12 Throat depth mm: 200 Distance between table and spindle: 400 Tool holder diameter mm: 30 H7 x 40 Machine general dimensions mm: 2380x1255x910 Two hand control: Optional Photoelecric barrier: Included Parts counter: Included Weight kg: 1450

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, total height: 3,050 mm, total width: 1,750 mm, total length: 1,150 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, oil tank capacity: 300 l, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. Dolqewbt Uqs Nx Shekl It is possible to inspect and check the machine in motion.

Condition: good (used), Year of construction: 2000, operating hours: 5,000 h, Functionality: fully functional, machine/vehicle number: 2089, total height: 5,000 mm, table height: 1,000 mm, total width: 3,000 mm, pressing force: 250 t, overall weight: 25,000 kg, MIB BRAND HYDRAULIC PRESS YEAR 01/2000 CAPACITY 250T MACHINE TO BE RESTORED, COMPLETE Djlqjv Hbh Rj Nx Shokl

Year of construction: 2016, Condition: ready for operation (used), A GSI pneumatic hot press is available. Working dimensions X/Y: 620mm/720mm, pressing force: 52t, max. temperature: 240°C, power supply: 80kW, weight: approx. 4300kg. Including various accessories. Documentation available. On-site inspection is possible. Djlq Nx Sev I U Hvehskl

Condition: used, Year of construction: 1994, Hans Schoen NH65 pressure 65 t +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Dkelqsvrk Epo Nx Shsl

Condition: good (used), Year of construction: 1979, Condition: 2012 overhauled to the latest UVV Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Dkolqsv Dvrre Nx Shjl Video about functionality available

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Dkelqsfhcc Uj Nx Shjl Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Year of construction: 1993, Condition: used, TYPE : DEA 400/2000 Type YEAR : n.d. Year MAXIMUM SLEDGEHAMMER PRESSURE : TON. 400 Ram capacity Dksloihf R Uoq Nx Shol SLIDING STROKE : mm. 1,100 Slide strok MAX VERTICAL LIGHT : mm. 1,600 Max shut height TABLE DIMENSIONS : mm. 2,000 x 1,600 Table size RAPID SPEED : mm/sec 650 Fast stroke TABLE PRESS CAPACITY : TON. 160 Cushion capacity PRE-MILER stroke : mm. 400 Cushion stroke HEIGHT ABOVE GROUND : mm. 5,800 Ground up to floor FRONT LIGHT : mm. 3,400 Distance btw uprights LATERAL LIGHT : mm.1,600 Lateral window

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Clamping table changed! Not an original table! Delq Nov Dvq Iex Shekl

Condition: repair required (used), Year of construction: 1972, Manufacturer WEINGARTEN Model VK.1250.46.76 Condition Used Warehouse number cod.323 Structure Double upright Used press Thrust: 1,250 ton. Thrust points n°4 Plunger kinematics Slide stroke 762 mm. VERTICAL LIGHT from the mold holder, CBRA 1,530 mm. Slide - registration 610 mm. Mold holder surface size 4,460 x 2,400 mm. Djlq Njvm Eifjx Shskl Extractable carriage n°2 lateral exit (possible mold of 5,000 mm) Mold holder surface height 400 mm. Number of strokes/min 8/18 Front useful passage 4,400 mm. Sheet metal passage in the upright 2,400 mm. Hydraulic safety Present

Condition: excellent (used), Year of construction: 2013, Nominal pressing force: 30 kN Working area installation height: 450 mm Table clamping surface: 400 x 400 mm Main ram max. Stroke: 280 mm (infinitely adjustable) Operating hours: 265 Instruction manual available according to the latest UVV further technical data see pictures Dslq Nx Ssv Dvqzehjkl

Condition: like new (used), Year of construction: 2008, YEAR : 2008 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER SLIDE : mm. 200 Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600 Cushion capacity STROKE OF THE BLANKHOLDER SLIDE : mm. 400 Dkslq Njvm Eixsx Shel Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights TOTAL WEIGHT: KG. n.d

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Dkslq Nx Ssv Dvqnohel Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW

Condition: as good as new (ex-display), Year of construction: 2006, YEAR : 2006 Year MAXIMUM PRESSURE OF THE RAM : Ton. 2.000 Ram capacity SLIDE STROKE : mm. 1500 Slide strok TABLE DIMENSIONS : mm. 5000 x 2380 Table size PRESSION OF THE BLANKHOLDER UPPER : Ton.300 Blankholder STROKE OF THE BLANKHOLDER slide : mm. 200. Cushion stroke ram RAPID SPEED : mm/sec 220 Fast stroke PRESSION OF THE BLANKHOLDER CAPACITY : Ton. 600. Cushion capacity STROKE OF THE BLANKHOLDER slide : mm. 400. Cushion stroke HEIGHT ABOVE GROUND : mm. 9,145 Ground up to floor FRONT LIGHT: 5000 mm Distance btw uprights Dkolovm Ei Ssq Nx Shjl TOTAL WEIGHT: KG. n.d

Condition: good (used), Year of construction: 2000, Thrust: 2000 TON. RATED CAPACIT Model: S4-2000.5000-2500-LD Dkjlq Nevm Eirox Shjl TYPE Year of construction: 2000 YEAR OF CONSTRUCTION Table size: 5,000 x 2,500 mm TABLE DIMENSIONS Slide adjustment: 400 mm SLIDE ADJUSTMENT Strokes per min.: 10-16 c/min. CONTINUOUS SPEED (variable) Stroke: 800 mm SLIDE STROKE Mold clearance at BDC: 1,200 mm SHUT HEIGHT Hydraulic Safety: present Hydraulic Safety

Condition: like new (used), Year of construction: 2009, Thrust: RATED CAPACIT Model: TYPE Year of construction: YEAR OF CONSTRUCTION Table size: Delq Nxjvm Eh Ue Shokl TABLE DIMENSIONS Slide adjustment: SLIDE ADJUSTMENT Strokes per min.: CONTINUOUS SPEED (variable) Stroke: SLIDE STROKE Mold clearance at BDC: SHUT HEIGHT Main motor power: MAIN MOTOR POWER Hydraulic Safety: Hydraulic Safety 1000 TON. PDM/4B 2009 4,900 x 2,380 mm. 500 mm. 8-16 c/min. 900 mm. 1,500 mm 220 kw present

Condition: as good as new (ex-display), Year of construction: 2004, Functionality: fully functional, Thrust: 1000 TON. RATED CAPACIT Model: PDM/4B TYPE Year of construction: 2009 YEAR OF CONSTRUCTION Table size: 4.900 x 2.380 mm. TABLE DIMENSIONS Slide adjustment: 500 mm. SLIDE ADJUSTMENT Strokes per min.: 8-16 c/min. CONTINUOUS SPEED (variable) Stroke: 900 mm. SLIDE STROKE Mold clearance at BDC: 1.500 mm SHUT HEIGHT Main motor power: 220 kw MAIN MOTOR POWER Hydraulic Safety: present Hydraulic Safety Dkolq Njvcq Ufsx Shol

Condition: used, Thrust: 600 TON. Dkolq Nxoq N Etts Shsl Barbed points: no. 2 Model: AF 600 MB 30-60 Year of construction: 1994 Table size: 3,000 X 1,600 mm. Slide size: 3,000 X 1,600 mm. Front passage: 3,000 mm. Side passage: 1,200 mm. Slide registration: 150 mm. Strokes per min: 20- c/min. Stroke : 500 mm. Mold clearance at PMI: 1,118 mm. Main motor power: 30 kw Hydraulic Safety: present Weight: 110 ton.

Condition: good (used), Thrust 100 ton. Thrust points No. 2 110 mm stroke Slide adjustment 80 mm. Press tables 1,200 x 600 mm Lateral passage 460 m Hits per min. 40,180 Dkslqeq N Et No Nx Shsl Min. 460 mm Transfer DGM

Condition: good (used), Manufacturer CLEARING Model S4-900-180 Condition Used Stock No.0274 Dkolq Netzy R Nex Shjl Thrust: 900 ton. Thrust points No. 4 Plunger Slide stroke 940 mm. Slide adjustment 762 mm. Number of strokes/min No. 16 Mold clearance at PMI 1,412 mm. Slide size 4,572 mm. x 2,438 mm. Table size 4,572 mm. x 2,130 mm, Pull-out carriage Present Useful front passage 4,622 mm. Side passage in the shoulder 1,400 mm. Hydraulic Safety Present Cushion in the Basement Present Bottom plate press stroke 280 mm.

Condition: good (used), Functionality: fully functional, pressing force: 1,500 t, table width: 2,440 mm, table length: 4,572 mm, die cushion stroke: 360 mm, clearance between the columns: 4,800 mm, stroke distance: 1,320 mm, Equipment: documentation/manual, Manufacturer Muller Model BZE 1500 Year 1980 Excellent condition Stock number cod.0313 Thrust: 1500 ton. Thrust points: no. 6 Slide stroke: 1320 Maximum sled opening:m 2,620 mm. Maximum slide closure:m 1,300 mm. Slide size: no. 6 Table size: 4,572 x 2,440 mm. Dkeleq Hdz Usq Nx Shsl Stroke premiums bottom plate: 360 mm. Useful front passage: 4,800 mm. Lateral passage in the shoulder: 2,600 mm. Pull-out carriage with possibility in the upright Location :Italy