Condition: good (used), Year of construction: 2016, clamping force: 800 kN, Very good condition - CC300 control - Maintained exellent from big danish manufacturer. Cgsb Esvib N Tem Nidot

Year of construction: 2000, Condition: good (used), Number: 0107058 Cooling capacity: 1,100 W at +6° C Cooling capacity: 1.270 kcal/h at +6° C Max. temperature: 44 °C Cob Em Nishri Ahjdsgt Pressure: 25 bar Dimensions: 750 x 460 x 450 mm Weight: 80 kg

Condition: good (used), Year of construction: 1998, Closing force 600 ton Screw diameter 80 mm Weight approx. 31 ton Cob Em Nsv Enwvjidjgt Control EC 100 Including handling robot ERC 63 Machine can be inspected under power

Condition: excellent (used), Year of construction: 2015, ZHAFIR ZE 1900/430 (2015) ZERES, low hours Clamping force: 190 t Screw diameter: 40 mm Shot weight: 194 g Distance between tie bars V: 520 mm Distance between tie bars H: 570 mm Min mould height: 200mm Max mould height: 550 mm Shot volume: 213 cm3 Type: Horizontal Drive: Hybrid Cgsb Em Nsvx Uhbeidot

Year of construction: 2021, Condition: good (used), SN: 220840029, best. from: Magnesium injection molding machine, make JSW, type JLM850-MGIIe, year of manufacture 2021, SN 220840029, specification: dead weight 50,000 kg, screw diameter 100 mm, injection pressure 67-86 MPa, injection capacity (theoretical) 1,728 cm³, shot weight (theoretical) 1,417 g, injection rate (theoretical) 35,343 cm³/sec, screw speed 0-160 rpm, nozzle diameter 17 mm x R40 mm, nozzle lift-off travel 75 mm, nozzle contact force 233 kN, position of the injection unit (2 stages) 0-200 mm, closing technology 5.Double toggle lever (folds inwards), mold closing force 8,330 kN, mold opening force 833 kN, platen spacing max. 2,3000 mm, mold opening stroke 1,200 mm, mold height 500-1,000 mm, distance between tie bars (HxV) 1,060 x 100 mm, clamping platen size (HxV) 1,590 x 1,590 mm, centering ring Ø 190 mm, mold fastening method T-slot type, opening and closing speed. of the casting mold: closing casting mold 61 m/min, opening casting mold 59 m/min, ejector force x ejector stroke 350 kN x 150 mm, casting mold height (HxV) min. 640 x 640 mm, pump power motor output 75 kW, servo motor output 22 kW, heating power 63 kW, total power 160 kW, machine size 11,300 x 2,900 x 3,800 mm, hydraulic tank capacity 800 l, cooling water consumption 8 m³/h, magnesium feed tank, make DMS, type MAC-2300, year of manufacture 0, SN, specification: mobile, approx. 1,600 x 1,500 x 1,900 mm, dead weight 500 kg, without type plate, feed fan, make Matsuni, type JL4-6VC-J, year of manufacture. 2021, power 2.2 kW, linear sprayer, make AED Automation, type AED 1000 LST2-Tele, year of manufacture 2022, SN LST2-0010, specification: , 6-axis industrial robot, make Kuka, type KR50 R2500 F/SEL, year of manufacture 2021, SN 1421941, specification: dead weight 587 kg, load capacity 50 kg, reach 2,501 mm, with control cabinet, cooling shelves, with 2 output chutes, protective fence, with safety device, control, , deburring press, make Reis, type SEP13-07-65 Dialog IV, year of manufacture 2022, SN , specification: dead weight 10,000 kg, nominal force 650 kN, , hinge conveyor, make Knoll, type 500P-40-L, year 2021, SN 1517512/2021 Cob Em Nov Aanheidsgt

Year of construction: 2018, Condition: like new (used), Sawing machine for simultaneous cutting of 2 glazing beads Technical Features: - Simultaneous 45° cutting of two glazing beads. - Two-handed safety control. - Vertical adjustment of the cutting table for milling the coupling foot. - The machine does not require counter-moulds: the glazing beads are housed in a standard plate and rest against adjustable vertical stops simulating the glass. - Suitable for cutting various types of glazing beads. - Compatible with the QUOTA GB PVC motorized roller conveyor. Cgob Emowcyi Dj Nidot - Right-hand loading / left-hand unloading (or vice versa) available.

Condition: excellent (used), Year of construction: 2006, clamping force: 800 kN, column diameter: 30 mm, 3 pcs of Very well maintained 2K machines from big Danish Manufacturer. Always maintained 100% Cgsb Em Nisv Du U Sodot

Condition: good (used), Stock clearance SALE - Injection molding machines, peripheral equipments, mechanical equipments and others - Injection molding machines, - Blow moulding machines - Peripheral equipments - Mechanical equipments - others Csb Ejq Ul Item Nidegt For more details visit our website “PLAST TRADE” or contact us!

Year of construction: 2009, Condition: excellent (used), IPM-TP 40 - 400 PIPE SAW for PVC PIPE Application: Cutting and chamfering PVC, PE, PP PIPES With chip extraction fan Min. diameter 40 mm Max. diameter 400 mm Csb Em Nsvbvznjidjgt Year of manufacture 2009 Accessories: Various clamp jaws Machine locations: Sachal Extrusionsmaschinen D-26345 Bockhorn-Grabstede Bahnhofstraße 6 The machine is my property.

Condition: new, Year of construction: 2025, Our belt haul-off can be built in different sizes. 40-80 m/min Contact length 170mm to 800mm Cjb Ejhd Ndxsm Nidsgt MADE in GERMANY

Year of construction: 1995, Condition: used, Extrusion line Starex 1000 - without winding! We have no winding available for this machine, customer has to get his own winders. Cgsb Em Niewawpisdot Doser - Maguire Machine has been in production from 1996 24/7 until last year. In 2024 it was working perfectly. Machine is sold with no winders and no chiller, please keep that on mind.

Year of construction: 2018, Condition: like new (used), AF10 – Machining center for reinforcement fastening and frame drilling for wall fixing. Technical Features - Automatic profile loading and unloading - Automatic screw loading - Automatic profile feed - Automatic screw driving with selectable pitch - Distinction between sash and frame for specific drilling operations - Automatic frame profile drilling - Possibility to use screws with different lengths and diameters - Fastening of reinforcements from 0.5 mm to 2.5 mm thickness - Adjustable screw insertion point positioning Standard Equipment - Loading roller conveyor - Automatic unloading table with profile accumulation Technical Data - Voltage: 380V + N + T + L1 + L2 + L3 - Power consumption: 6 kW Cgebjwcx Swj Em Nidot - Working pressure: 8 bar - Air consumption per cycle: 530 liters/cycle

Condition: used, Year of construction: 2008, 8 units available (year 2007-2008) only as a package for sale. Arburg 320C 500-100 (2008) Clamping force: 50 t Screw diameter: 25 mm Opening stroke 350 mm Mould height : 200 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Mould clamping platens: 446x446 Injection pressure : 2240 Injection flow : 124 cm3 Ejector stroke : 125 mm Ejector force: 30 kN Net weight : 2080 kg Type: Horizontal Drive: Hydraulic Selogica CF card reader machine tested Csb Ejvtzqrom Nidjgt English language

Condition: good (used), Year of construction: 2002, clamping force: 3,200 kN, screw diameter: 75 mm, clearance between the columns: 610 mm, displacement volume: 1,259 cm³, injection pressure: 1,587 bar, BILLION HERCULE H2000 series - 320 T Csb Em Nevv Nwrsidsgt Clamping force: 320 T - 3200 KN Injection unit: H 2000 Screw diameter: 75 mm Distance between columns: 610 x 610 mm Plate dimensions: 920 x 920 mm Minimum/maximum mold thickness: 330 - 680 mm Opening stroke: 660 mm Injected volume: 1259 cm3 Material pressure: 1587 bars Dimensions: 7.1 x 2.1 x 2.6 m Weight: 14,000 kg

Condition: like new (used), Year of construction: 2019, operating hours: 150 h, Functionality: fully functional, machine/vehicle number: 101608334, Equipment: safety light barrier, All technical data is included in the attached PDF. The machine is in perfect condition (photo). Connected - on-site tests are possible at any time. It was used very little - a change in our production profile. We are selling due to the company's relocation. It is basically a new machine. The manufacturer's price for a new machine is in the attached PDF. Cgeb Em Niowa Ed Isdst

Year of construction: 2025, Condition: new, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Cgeb Eoiv H Ekom Nidet Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: like new (used), The control panel was given to me by customers in commission Csb Em Nion Tlhtjdsgt

Condition: ready for operation (used), Year of construction: 2017, A total of five Cannon foam systems are available. Materials: isocyanates and polyol, press plate dimensions X/Y: 720mm/650mm, lid opening angle: 100°, tilt angle: 60°, opening min./max.: 312mm/502mm, parallel stroke: 190mm, approach stroke: 95mm, press stroke: 95mm, ejector stroke: 75mm, control: PLC. Including material preparation. Documentation available. On-site inspection is possible. Cob Emev Hgkde Nidegt

Condition: excellent (used), Year of construction: 2003, 8x Caviete Cjb Emeh Rwlqe Nidegt Canister closure Year ca 2003

Condition: excellent (used), Year of construction: 2016, Functionality: fully functional, machine/vehicle number: 2DD16110003, total height: 1,700 mm, total width: 1,100 mm, total length: 900 mm, type of input current: three-phase, overall weight: 190 kg, Shini dryer-dryer in perfect working order. Ideal for hygroscopic plastics. Hopper capacity: 80L Heating + blowing power = 8,320W Integrated water cooling circuit. Very easy to use, with choice of drying temperature and drying time. The unit operates on the principle of continuous dehumidification of the atmosphere by condensation. Cjbork Nauo Em Nidogt Possibility of connecting an automatic vacuum filling and emptying system.

Year of construction: 2019, Condition: used, Glass sealing machine with the following equipment - automatic height measurement of the glass package - automatic thickness measurement of the glass package, or the sealing width - automatic dosing depending on the measurement - precise positioning with suction cups - automatic cleaning with automatic start - washing with detergent at high pressure - high power extrusion pump driven by servo motors with precise dosing, - CNC control for precise positioning - extrusion pump resistant to corrosion and high pressures Cobsv Hck He Em Nidjgt - uninterrupted operation for oversized units - automatic rounding of the corners - manual functions Power supply; 400 V ± % 10 - consumption 46 kW Air pressure: Min. 6 bar - Max. 7 bar - consumption 250 Ltr. /min 3. Dimensions of the elements • Minimum 190 mm x 560 mm • Maximum length 4000 mm Maximum height 2500 mm

Year of construction: 2020, Condition: not inspected (used), Functionality: unexamined, We offer you, a grinding line with a PS-H PS-H 600X900 knife mill manufactured by PALLMANN. The plastic grinding line is used for maximum recovery of plastics from waste in an automated manner on an industrial scale. Technical parameters: Input material: HDPE, PP EPDM Processing capacity: 1.7-2.1t/h Voltage: 400V Cgeb Em Nisv Ev Tljdet Equipment: -belt conveyor for the PS-H 600x900 F3/SD5 mill hopper; -tunnel metal detector on the hopper conveyor; -knife mill; -pneumatic extraction system; -double BigBag station for collecting regrind; -mechanical screw feeder for transporting regrind; -automatic filter; -control cabinet. Damage of an operational nature was found in the form of scratches and paint chips or slight deformations.

Condition: like new (used), Year of construction: 2024, Equipment: type plate available, Volumetric dosing systems - granules, powders and ground material We offer a range of fully functional volumetric dosing systems that are ideal for conveying granules, powders and ground material. • Various models available: We have different dosing systems in stock that can be adapted depending on the material and application. • Testing option: On request, we will test the dosing devices with your material to ensure that they meet your requirements. • Reliable function: All systems are tested and ready for immediate use. Cgsb Em Nisvmylzedet Contact us and we will help you find the right doser for your requirements. We are happy to answer any questions or provide advice!

Year of construction: 2018, Condition: new, Control system Battenfeld Unilog 9000 C for Battenfeld injection moulding machine Cgob Emsd Eam Rs Nidst

Condition: excellent (used), Year of construction: 2000, Angel ES 500/125 HL Closing 125 TO Year 2000 Scrow 45mm Cob Em Nish R T Sljdegt Spray weight 318 cm3