Condition: excellent (used), Year of construction: 2008, operating hours: 58,000 h, Functionality: fully functional, clamping force: 100 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Hello dear customers, We have great cleanroom machines in our program again. Here we offer this Engel e Max cleanroom machine from 2008. This machine is equipped with a GEKU SR 500 ST linear robot. The machine has run almost 58,000 pump hours in automatic mode. The machine comes from a well-known manufacturer in the pharmaceutical industry, so the machine, including handling, was subject to very strict maintenance management and is in the very best condition for its age. There is hardly any damage to the paintwork. Cebvot A Ufwem Uk Nogt I would be happy to send you further information and make you an offer. I look forward to your inquiry. With sunny greetings Nick Schönfeld

Condition: used, Year of construction: 1983, Functionality: fully functional, machine/vehicle number: 4209, Dear Sir or Madam, Cobvm Ukewcflkj Negt We are offering for sale a used vertical cutting machine model IS/M from Albrecht Bäumer GmbH & Co. KG. The machine was built in 1983 and is in good working condition. Technical Specifications: • Manufacturer: Albrecht Bäumer GmbH & Co. KG • Model: IS/M • Year of Manufacture: 1983 • Machine Type: Vertical Cutter • Dimensions (L x W x H): 5,500 mm x 5,200 mm x 3,000 mm • Weight (static): 2.0 t • Voltage: 3x380 V/AC • Frequency: 50 Hz • Motor Power: 3 kW • Total Power: 9 kW Features & Features: ✔ CE marking present ✔ PLC 7 control system recently replaced ✔ Complete with safety fence and safety door ✔ Emergency stop switch ✔ Automatic operation possible ✔ Mobile table & adjustable knife guide ✔ Height-adjustable knife tree with knife tensioning ✔ Hardly any malfunctions when used in 2-shift operation Additional information about the machine & spare parts: For further details We will be happy to send you a separate information document upon request, including additional technical information and images. Various spare parts are available for this machine. An overview of these parts and further details can also be found in the separate document mentioned above. Price & Terms of Sale: • Price: Negotiable (plus VAT) • Payment: 30 days net • Delivery: Self-disassembly + self-collection • Inspection: Possible by appointment; the machine is ready for operation Note: Sales are made exclusively to companies, excluding any warranty or liability for material defects. Returns and guarantees are excluded. If you are interested or have any further questions, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Max. film width, mm: 495 Cgsbvmoq A Um Ro Uk Not Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 1995, Condition: ready for operation (used), Cutting angle (fixed): 45°, max. cutting height: 50mm, max. cutting width: 100mm, max. saw blade diameter: 250mm, machine dimensions X/Y: approx. 500mm/1100mm. On-site inspection is possible. Cebewfg E Rjvm Uk Nogt

Condition: used, Year of construction: 2004, Functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: DEMAG Typ: Concept 350/710-2300 Baujahr: 2004 Schließkraft 350 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 675 mm Schnecken DN: 55 mm Max. Hubvolumen: 890 cm³ Spritzteilgewicht: 800 g/PS Steuerung: NC4 Ausstattung: Ausstattung: Roboter, Hersteller: WITTMANN 2 St. Kernzüge Hochverschleißfeste Spritzeinheit Cebvm Ukewa Trgj Nsgt Verfügbar ab 16. KW/2025

Year of construction: 1980, Condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Cgjbved Sg Hcjm Uk Not Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Condition: excellent (used), Functionality: fully functional, Equipment: documentation/manual, Dear customers, Cebvmou Rqm Ue Uk Nsgt We are offering an automation system with very high-quality built-in components and robots. We are sure that some of you may need these parts and we will find a fair price for everyone. With best regards Nick Schönfeld

Condition: used, Year of construction: 2005, Hersteller: KRAUSS MAFFEI Typ: KM300-1400C2 Baujahr: 2005 Schließkraft 300 Tonnen Holmabsta 630 x 630 mm Einbauhöhe min.: 330 mm Öffnungsweg: 820 mm Schnecken DN: 45 mm Max. Hubvolumen: 373 cm³ Cjbvm Ujvzqhvjk Njgt Spritzteilgewicht: 335 g/PS Steuerung: MC3+ Ausstattung: 2 St. Kernzüge an BWAP Hochverschleißfeste Spritzeinheit Eine zweite zusätzliche Spritzeinheit DN 45 mm Innendruckmessung Kistler Verfügbar ab 16. KW/2025

Year of construction: 2000, Condition: like new (used), stock-No.1919 Cgobjb Aq Hpevm Uk Not complete set of extrusion-tools / calibrating parts , used but very good condition- very less operting hours, tools made in Germany ᐳ for the production of electric cable protection canals/ ducts, incl. punching unit to punch the fixing holes in the ready-made profiles

Condition: good (used), Year of construction: 2007, operating hours: 71,303 h, Functionality: fully functional, machine/vehicle number: 1634.., clamping force: 7,500 kN, screw diameter: 90 mm, injection weight: 2,850 g, plate length: 1,250 mm, plate width: 925 mm, Equipment: documentation/manual, This angel is in very good condition. One bar can be pulled out to better fit the shape. Cgjbvm Uksvta Nte Net

Year of construction: 2011, Condition: reconditioned (used), No.2401 1 used melt-Filter / screen-pack-changer back-flush / self-cleaning ECON Type: ESK 480-4B y.o.m. : 2011 2 pistons each 2x Ø 123,5 mm 2 pistons : each 2x Ø 176,3 mm complete incl. Hydraulic pack Siemens Panle control The Filter can be inspected in our workshop , date shortly by appointment. You´re welcome More melt-filter / screen-pack-changer ex our machine-stock Wuppertal - Germany available : EREMA RS and Laserfilter Kreyenborg K-SWE / RS Ettlinger ECO BD Plast Cobvogbfwmom Uk Nogt Alphatec Gneuss Brit-Ass

Condition: excellent (used), Year of construction: 2011, operating hours: 74,000 h, Functionality: fully functional, clamping force: 1,100 kN, screw diameter: 20 mm, Equipment: documentation/manual, Top Offer: Arburg 470S 170/70 2-Component Injection Molding Machine (2011) This reliable machine offers outstanding performance and versatility—perfect for demanding production requirements. Main Features: Condition: Well maintained and ready for use Mileage: 9.3 million cycles Operating hours: Manual operation: 74,500 hours Cobvmov Rf S Us Uk Nogt Automatic operation: 70,000 hours Injection units: Horizontal: Ø 170 mm, max. 36.2 cm³ Vertical: Ø 70 mm, max. 21.4 cm³ Technical Highlights: Opening stroke: 850 mm Electric indexing Integrated 15-zone hot runner 3 core pulls & 2 blow-out stations (including needle valve control) Additional functions: Multilift H (6 kg capacity) with: 2 vacuum connections 5 double-acting grippers Servo Z-axis (800 mm) Pneumatic control for C-, G-, X-, and B-axis Interfaces for ALS and temperature control units Included additional equipment: 2 Farrag Tech dryers (20S & 10S), compatible with dryer interfaces. This machine meets the highest requirements and is perfect for precise and efficient injection molding processes. Don't hesitate – For more information or to schedule a tour, contact us today.

Year of construction: 1996, Condition: reconditioned (used), Stock-No.1624 Strand "spagetti" pelletizer Capacity 500 kg/h Drive 4 kW Rotor width 200 mm - double bearring materials: PP,PE,PS,PET,PC,PA div material Noise- protected housing box OPTIONAL against additional cost: adjustable pellet length device Ask for our machine-stock-list, with more pelletizing equipment ex our stock availabe. Cobvm Ukjby I Sys Njgt

Condition: good (used), Year of construction: 2006, Functionality: fully functional, clamping force: 2,600 kN, Equipment: documentation/manual, Dear Sir or Madam, This Engel is just arriving and is being sold on behalf of the customer from direct production. The machine is of course thoroughly tested and cleaned before being switched off. Cobvmovxkpno Uk Nogt The machine can be inspected on site under load. With sunny greetings Nick Schönfeld

Year of construction: 2004, Condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Csbvm Uoiyx Uzjk Njgt Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Condition: excellent (used), Year of construction: 2006, Functionality: fully functional, overall weight: 10,600 kg, Hello dear customers, We have great cleanroom machines in our program again. Here we offer this Engel 2-component cleanroom machine from 2006. This machine can be purchased as a package with a GEKU SR 500 ST. A conveyor belt, protective cage and turntable are available as accessories. Cgobvst A Ui Asm Uk Nst The machine has run just under 33107 hours in automatic mode. The machine comes from a well-known manufacturer in the pharmaceutical industry, so the machine including handling was subject to very strict maintenance management and is in the very best condition for its age. There is hardly any damage to the paintwork. I would be happy to send you further details and an offer. With best regards Nick Schönfeld

Year of construction: 2004, Condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany Cgobvmjiyya Ae Uk Njt More extruders available

Condition: good (used), Year of construction: 2008, Functionality: fully functional, clamping force: 5,500 kN, screw diameter: 90 mm, clearance between the columns: 914 mm, column diameter: 155 mm, displacement volume: 2,480 cm³, Equipment: documentation/manual, Here we are offering a freshly arrived Engel CL 4550/550 built in 2008 Cgobvm Uovw Ad Ujk Njt Please ask for more information. Regards, Nick Schönfeld

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 300 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Screw speed up 143 r.p.m. Cgebvei Dtb Usm Uk Nst screw depth 14 mm heating power installed 35 kW 1x athm. venting port with „Stuffer“ * Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW control-board and operation panel OPTIONAL against additional price ᐳ * Vacuum pump ᐳ pellet classifier sieve, conveying, Big-Bag Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: reconditioned (used), partly overhauled granulator input 350x420 mm drive 11 kW new control board Optional: blower, pipes and cyclone against add. costs Cebogchddevm Uk Njgt Ready for test-run with your material We have more granulators and shredders in stock, as; TRIA Herbold Dreher Erema Vecoplan Alpine-Hosokawa Ask for our actual machine-stock-list or visit us in Wuppertal-Germany. You´re welcome

Year of construction: 2022, Condition: as good as new (ex-display), strand-pelletizer type Alphatec AS-G 200 Cgsbvjcpg Rqsm Uk Net Rotor width 200 mm ᐳ hard-metall cutting rotor drive 7,5 kW - AC speed frequency controlled Capacity 700 kg/h - depending material specifications More strand-Pelletizers ( ST ) ex stock Wuppertal-Germany available, ask for our most recent stock-list or visit us, you´re welcome

Year of construction: 2015, Condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head Cgjbvm Ued Sg Hrsk Not 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: Cgjbvm Uksgbdrqo Net 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Year of construction: 1996, Condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Cjbjh Eyd Asvm Uk Negt Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Year of construction: 2000, Condition: reconditioned (used), Stock - No.: 2107 1 used, partly overhauled and functionally tested strand-pelletizer COMAC Type SG-100 SV infeed width 100 mm Cutting Rotor width 110 mm, parallel cut with 32 teeth Rotor- Ø 200 mm >> strand-pellet cutting length adjustment 2 drives: Cobvsiyyc Ejm Uk Negt 1x for cutting-Rotor - 4 kW 1x for infeed-roller 1,5 kW with STÖBER reduction-speed gear Noise protected housing of pelletizing Chamber Inspection visit / trial-run shortly by appointment possible. We can also offer suitable strand-cooling bath, strandb-blower or pellet classifier ex stock. More strand-eplletizer and other pelletizing systems/units ex our stock availabe ( waterring - , hot-face- and underwater pelletizing )