Used plasma cutting machines for sale (142)

Condition: repair required (used), Year of construction: 2010, operating hours: 7,700 h, functionality: not functional, machine/vehicle number: 15158-10, working range: 4,000 mm, sheet thickness (max.): 12 mm, sheet thickness steel (max.): 12 mm, CNC plasma cutting system BACH ThermoCut 2000 with pipe cutting device, TEKA dust extraction system, and plasma source. Manufacturer: BACH Maschinenfabrik GmbH Type: ThermoCut 2000 Year of construction: 2010 For sale is a used CNC plasma cutting system BACH ThermoCut 2000, including pipe cutting device, plasma source, dust extraction system, and complete piping. The system was used in our machine manufacturing company until recently and is suitable for cutting sheet metal as well as processing pipes. Technical data: Working area: 4,000 x 2,000 mm Plasma source: Thermal Dynamics Ultra-Cut 100 CNC control: myBach Pipe cutting device included Pipe diameter: min. 50 mm max. 320 mm Max. cutting thickness: Mild steel: up to 12 mm Stainless steel: up to 10 mm TEKA filter and dust extraction system included Complete dust extraction piping system included CE marking available Maintenance and condition The system was regularly maintained during its entire service life. Official maintenance by the manufacturer was last performed on August 20, 2013. After that, ongoing maintenance was carried out in-house. Filters of the TEKA dust extraction system were renewed approximately 6 months ago. Cutting torch head was renewed approximately 4 years ago. Cooling water filter is changed regularly, approximately once a year. The operating hour counter of the dust extraction system currently shows approximately 7,700 hours. Since the system was operated exclusively with the dust extraction system running, this value can be used as a good indication of the total operating time of the system. Known defect The system is currently not operational. After consultation with Voortman and Mr. Sobiech from Magma Industries, the cause is likely to be in the cooling circuit of the plasma source. According to the experts, the most likely causes of the fault are: Defective cooling water pump Gkjdpfx Ajzizkyjcieb Defective flow sensor Leakage on the suction side of the cooling water system A final fault diagnosis has not yet been carried out. Spare parts for the installed Thermal-Dynamics plasma source are now only available to a limited extent. The machine is therefore explicitly sold as a system requiring repair or for refurbishment. Scope of delivery BACH ThermoCut 2000 CNC system Thermal Dynamics Ultra-Cut 100 plasma source Pipe cutting device TEKA filter and dust extraction system Control panel with controller Dust extraction piping Accessories according to existing equipment Special features ✅ Pipe cutting up to Ø 320 mm ✅ Complete package including dust extraction ✅ Solid industrial machine made in Germany ✅ Easy-to-disassemble gantry design ✅ Also interesting for buyers who already have a suitable plasma source Location 24161 Altenholz, Germany Price Negotiable €21,900 Inspection possible by appointment. Sale exclusively to commercial businesses, excluding any warranty for defects. Loading / Dismantling The system is offered exclusively for self-dismantling and self-collection. The buyer assumes full responsibility for the dismantling, loading, and removal of the machine at their own cost and risk. To assist with loading, a hall crane with a maximum lifting capacity of 10 tons is available on site. Use of the crane can be arranged in advance. Due to the size and weight of the system, we recommend an inspection before submitting an offer.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 80 mm, sheet thickness aluminum (max.): 50 mm, input voltage: 400 V, total length: 13,000 mm, cutting current: 300 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 12,000 mm, type of cooling: water, Here is the sales listing translated into professional English: For Sale: Teknohaus Thermcut 4500 P Gantry Cutting Machine (Bevel Plasma & Oxy-Fuel) For sale: A modern, industrial-grade Teknohaus Thermcut 4500 P gantry cutting machine, manufactured in 2021. This system combines high-precision Hypertherm XPR300 bevel plasma technology with IHT Automation oxy-fuel cutting, offering a versatile range of cutting capabilities from thin sheet metal to heavy plate cutting and beveling. Key Specifications Manufacturer: Suomen Teknohaus Oy Model: Thermcut 4500 P Year of Manufacture: 2021 Supply Voltage: 3 x 400 V Dimensions & Capability Gkjdpfxezy I S Es Aciob Cutting Area / Table Size: 2,500 mm x 1,200 mm Bevel Plasma Capability: Enables direct cutting of weld preparation bevels (e.g., V, X, Y, and K bevels) directly from the plate. Equipment & Features Plasma Power Source: Hypertherm XPR300 (X-Definition technology, 300 A) Oxy-Fuel Cutting: IHT Automation / GCE FIT+ torches with dedicated gas control panel (Preheat / Propane / Cutting / O₂) Control System: Modern CNC control unit with touchscreen and physical controls Safety Features: Emergency pull-wire safety system along the table sides and comprehensive safety labeling Cutting Capacity (Hypertherm XPR300) Mild Steel: Piercing up to 50 mm (Argon-Assist), Severance up to 80 mm Stainless Steel & Aluminum: Piercing up to 38 mm / Severance 50–75 mm The machine is in excellent working condition and has been well-maintained in an industrial production environment.

Condition: ready for operation (used), Year of construction: 2016, MicroStep Master Cut Eco Plus CNC plasma cutting system with nesting software Year of manufacture: 2016 Power source: Kjellberg HiFocus 161i Provision for retrofitting an oxy-fuel torch including Kemper filter system Maximum working area: 3000x1500mm Machine location: Hall in Tirol Gjdpfx Aozpf U Nociokb Immediately available

Condition: excellent (used), Year of construction: 2019, Plasma cutting system Swift Cut Pro 3000 Gkedpjzyvgdjfx Acijb Cutting area: 3000 × 1500 mm Plasma power source: Hypertherm Powermax 125 Plasma cutting current: 30–125 A Piercing (structural steel): 25 mm Well-maintained system, purchased in 2019, with few operating hours.

Condition: good (used), Year of construction: 2016, functionality: fully functional, working range: 6,000 mm, sheet thickness (max.): 30 mm, working width: 2,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 150 mm, type of cooling: water, We are offering this well-maintained MicroStep MasterCut Compact 6001.20P plasma cutting machine, manufactured in 2016. Gkodpfx Aezt Imiocisb Manufacturer: MicroStep Model: MasterCut Compact 6001.20P Working area: 6000x2000 mm Year of manufacture: 2016 Condition: good Plasma source: Kjelberg Hi Focus 161 neo Cutting range: sheet metal thickness 1-30 mm The machine is in operation and can be inspected. The machine has been serviced annually by Microstep. Includes dust extraction system Donaltson Torit DCE. Machine available from September. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Brand: Grotius Gkedpozupvuofx Aciob Control system: Linux CNC Working area: 3000 x 1500mm Length (mm): 4020mm Width (mm): 2330mm Height (mm): 1570mm Description: Includes Thermal Dynamics A40i plasma source & various wear parts.

Condition: used, Year of construction: 2010, machine/vehicle number: VG6000 3224, Equipment: documentation/manual, Koike Versagraph 6000, including cutting tables. Excluding strips. The machine was fully functional until April 2022. It has been disassembled and stored since 2022. Original new price: 450,000 euros. Gkodpfx Acezdz U Uoieb

Condition: good (used), Year of construction: 2017, functionality: fully functional, • Baykal BPL-H 4012 Gjdpfx Ajzp D S Tociokb • Supplied new in 2017 • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 2,016 and 3,120 • 4 m x 12 m bed

Condition: used, Year of construction: 2015, Swift Cut 3000 W/T Plasma Cutting Machine, 3000mm x 1500mm Cuttting Bed, Hypertherm Powermax 125 Power Source. S/No. 4500318 (2015). Country of Origin: United Kingdom Gkodpfxszn Uuis Acisb Please Note: Collection from 6th – 20th October 2026, Site will be closed from 10th September – 5th October 2026 Location: These lots are located in Cardiff, Wales, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2016, BEVEL head - 5 axes SIDEROS table with dimensions 4000 x 6000 mm SIDEROS ECO16CT external filter COLLECTION BY SEPTEMBER 2026 Gsdpfx Aszw Nmxscijkb

Condition: like new (used), Year of construction: 2022, operating hours: 238 h, functionality: fully functional, machine/vehicle number: PR5-2500-07221514, type of input current: AC, sheet thickness (max.): 22 mm, overall weight: 1,000 kg, input voltage: 230 V, total width: 2,200 mm, total height: 1,500 mm, total length: 3,800 mm, cutting height (max.): 120 mm, table length: 2,500 mm, working width: 1,250 mm, table width: 1,250 mm, cutting current: 105 A, working length: 2,500 mm, input current: 6 A, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 120 mm, type of cooling: water, height adjustment type: electric, input frequency: 60 Hz, Equipment: documentation/manual, Swift-Cut PRO 2500 MK5 CNC Plasma + Hypertherm 105 (LIKE NEW / 238h) 🇬🇧 ENGLISH DESCRIPTION: Condition: LIKE NEW (Only 238 operating hours, approximately 1 month of actual use). Availability: Immediately available. We offer a top-of-the-line CNC plasma cutting machine, the Swift-Cut PRO 2500 MK5 (UK, 2022). In perfect technical and visual condition, ready for immediate production. Equipped with a highly efficient Hypertherm Powermax 105 and a water table. Key Technical Specifications: - Cutting area (L x W): 2500 x 1250 mm - Z-axis clearance: 120 mm - Plasma source: HYPERTHERM Powermax 105 - Table type: Water table - Power supply: 110-230 VAC; 50/60 Hz Software Included: - CNC Controller - 2D Design: Solid Edge 2D - Nesting: SigmaNEST Companion Advanced Features & Equipment: - Soft Sense (IHS): Accurate piercing and cutting height control - DTHC: Dynamic and automatic voltage correction - XYZ Torch Protection: Advanced collision protection (Magnetic head) - Laser pointer for easy positioning - Precision linear rails and planetary gears Transport & Logistics (Our HUGE Advantage): - FREE Loading: Professional and safe loading included! Gkjdpoztu Aqefx Acieb - Transport Assistance: We assist in organizing fast and cost-effective transport in Europe. - Video of the machine in operation available upon request; on-site testing welcome. 🇩🇪 DEUTSCHE BESCHREIBUNG: Zustand: WIE NEU (Nur 238 Betriebsstunden, ca. 1 Monat Nutzung). Verfügbarkeit: Sofort verfügbar. Wir bieten eine erstklassige CNC-Plasmaschneidanlage Swift-Cut PRO 2500 MK5 (UK, 2022). Perfekter technischer und optischer Zustand, sofort einsatzbereit. Mit hocheffizienter Hypertherm Powermax 105 und Wassertisch ausgestattet. Wichtigste technische Daten: - Schneidbereich (L x B): 2500 x 1250 mm - Z-Achsen-Freiraum: 120 mm - Plasmaquelle: HYPERTHERM Powermax 105 - Tischart: Wassertisch Inklusive Software: - CNC-Steuerung - 2D-Design: Solid Edge 2D - Nesting: SigmaNEST Companion Erweiterte Funktionen & Ausstattung: - Soft Sense (IHS): Genaue Einstech- und Schnitthöhe - DTHC: Dynamische Spannungskorrektur während des Schneidens - XYZ Torch Protection: Fortschrittlicher Kollisionsschutz (Magnetischer Kopf) - Laserpointer zur einfachen Positionierung - Präzise Linearschienen und Planetengetriebe Transport & Logistik (Unser GROSSER Vorteil): - KOSTENLOSER Ladevorgang: Fachgerechtes Verladen im Preis inbegriffen! - Transportunterstützung: Wir helfen bei der Organisation des Transports in Europa - Ein Video im Betrieb ist auf Anfrage erhältlich, Vor-Ort-Test möglich

Condition: used, Year of construction: 2021, SIDEROS ORION 2 table with scraper, year 2014. Table dimensions: 2600 x 12000 mm. New cutting head. MESSER MULTITHERM 4000 oxy-fuel cutting machine, year 2008. PROFIMEC external filter. TO BE COLLECTED BY SEPTEMBER 2026. Gksdpfjzw H Igox Acisb

Condition: used, Year of construction: 2016, operating hours: 2,170 h, functionality: fully functional, input voltage: 400 V, total width: 3,880 mm, total length: 3,100 mm, input current: 160 A, Equipment: documentation/manual, MGM Omnicut Star 3100 CNC plasma cutting system Manufacturer: MGM Model: Omnicut Star 3100 Year of manufacture: 2016 Operating hours: approx. 2,100 h For sale is a well-maintained MGM Omnicut Star 3100 CNC plasma cutting system from 2016 with only approximately 2,100 operating hours. The machine is in good technical condition and is ready for immediate use. Equipment: CNC plasma cutting system MGM Omnicut Star 3100 Year of manufacture 2016 Approx. 2,100 operating hours Plasma source: Kjellberg HiFocus 161i neo Additional oxy-fuel torch for economical oxy-fuel cutting Precise machining of steel, stainless steel and aluminum Robust machine construction for industrial use The combination of the powerful Kjellberg HiFocus 161i neo and the oxy-fuel torch enables both highly precise plasma cuts and the economical cutting of larger material thicknesses. Note regarding the sale: We offer this machine on behalf of a client and act solely as an intermediary. The sale is made directly by the machine's owner. We will gladly facilitate contact and assist you with the entire process. An inspection of the machine is possible at any time by prior appointment. We will gladly provide further technical data, images and information on the equipment upon request. Gsdpfx Acozpwcfoiskb We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2021, • Baykal BPL-H 4012 • Supplied new in 2021 Godpfxszp D T Dj Aciskb • Hypertherm XPR300 AutoGas • EDGE Connect CNC • Twin plasma heads • Arc hours: 3,480 and 5,448 • 4 m x 10 m bed

Condition: used, Year of construction: 2012, operating hours: 2,795 h, functionality: fully functional, machine/vehicle number: 21214714, type of input current: three-phase, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 150 mm, sheet thickness aluminum (max.): 40 mm, input voltage: 230 V, cutting speed: 2,000 mm/min, table height: 700 mm, workpiece weight (max.): 30,000 kg, table length: 12,950 mm, table width: 2,700 mm, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used ESAB COMBIREX DX 3500 gas and plasma cutting machine, manufactured in 2012. Gsdpfjzc Hn Eox Acijkb Type: COMBIREX DX 3500 Machine No.: 21214714 Year of Manufacture: 2012 If you have any questions or require further information, please contact us by email or phone.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Table surface: 7,500 x 2,500 mm Positioning speed: 40,000 mm/min Positioning accuracy: = 0.06 mm/min Repeatability: 0.05 mm/min Machine weight approx.: 2,300 kg MicroStep CNC cutting system of the MG series with the following features: - Hypertherm® XPR170™ plasma power source with automatic OptiMix™ console - Plasma rotator for weld preparation - Fully automatic oxy-fuel torch - Fully automatic drilling spindle MG-40-P26 with 26.8 kW - Steel portal driven and stiffened on both sides for a clear and precise cut - AC servo motors from Panasonic for high drive power and excellent dynamics - Durable and low-maintenance planetary gearboxes - User-friendly machine control - High reliability and long service life, even in three-shift operation - MicroStep iMSNC® machine control with MMI console and 24" touchscreen - iMSNC® module | User management - iMSNC® module | Expert system - iMSNC® module | Automatic calibration of mechanical sensing - iMSNC® module | Visualization of wear parts - iMSNC® module | Assistant for loading CNC programs - iMSNC® module | Management of cutting programs (MRP) - iMSNC® module | EcoInfo - iMSNC® module | MachineInfo - iMSNC® module | Assistant for service and maintenance operations - USB 3.0 connection for storage media - Remote maintenance module MicroStep RemoteDiagnostics® - Remote maintenance access via TeamViewer - Two LCD control units on the portal - Laser pointer with automatic offset transfer - Hypertherm® XPR170™ plasma power source Gkedpjzwl Dmefx Acieb - Industry-leading cut quality - X-Definition - Advanced HyDefinition technology - Automatic gas console | OptiMix™ - CNC interface for the Hypertherm® XPR170™ Connection to the CNC control - Module for automatic power control of the Hypertherm® XPR170™ - Electrical and mechanical torch sensing - Remote activation of plasma power source - Double-sided cable protection (collision protection) of the portal bridge via emergency stop - Extraction table system with oscillating conveyor OXYtrac 2580 HD Main components and dimensions: 1 Table consisting of: 4 table elements WxLxH (mm) 2,600 x 2,080 x 950 Total support area: WxLxH (mm) 2,600 x 8,320 x 950 Contiguously usable working area per table: Vertical cutting: WxL (mm) 2,500 x 8,000 Bevel cutting: WxL (mm) 2,000 x 8,000 Table width (outer): W (mm) 2,830 2 Oscillating troughs L (mm) approx. 8,900 Cutting processes and associated extraction capacity: 1x Plasma max. 170 Amp., bevel cutting 1x Oxy-fuel max. 100 mm workpiece thickness regularly 200 mm workpiece thickness occasionally

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, sheet thickness steel (max.): 80 mm, table length: 6,000 mm, working width: 3,000 mm, table width: 3,000 mm, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 3,000 mm, Equipment: documentation/manual, CNC Plasma Cutting Machine 6000x3000 mm – Messer MetalMaster Xcel 6030 – Hypertherm XPR300 – Bevel Head CNC Plasma Cutting Machine Messer MetalMaster Xcel 6030 General Information • Manufacturer: Messer Cutting Systems year of manufacturing 2020 • Model: MetalMaster Xcel 6030 • Machine Type: CNC Plasma Cutting Table • Condition: Used – good working condition • Availability: Immediate available Working Area • Cutting table size: approx. 6000 × 3000 mm Plasma System • Plasma power source: Hypertherm XPR300 High-definition plasma system for precise and high-speed cutting of carbon steel, stainless steel, and aluminum. Equipment / Options • Bevel cutting unit: BEVEL-R (5-axis bevel cutting system) for weld preparation and angled cuts • Software: OmniWin – programming and nesting software for optimized material usage Dust extraction system • BEUTING PFM3-9 (100 L extraction unit Machine Advantages • Robust industrial gantry construction • High precision and productivity • Bevel cutting capability for complex parts • Efficient nesting and programming via OmniWin software • Suitable for heavy steel fabrication and industrial production Applications • Structural steel fabrication • Industrial metal cutting • Manufacturing of machine components and steel constructions Gsdpfoyx Svbsx Acijkb Additional Information Sold as it is dismantling and shipping not included. Machine can be inspected under power by appointment. Further technical details, photos, and videos available on request.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC oxy-fuel cutting machine in very good condition, lightly used. Godpszhby Ssfx Aciekb

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, number of axes: 3, Plasma cutting machine manufactured in 2007. This MicroStep SPLR-P features a Kjellberg HiFocus 160i PLUS plasma power source, offering a cutting current range of 10A to 160A. It includes an integrated CNC operator terminal for precise control and a filtration system by Donaldson Torit DCE. If you are looking to get high-quality plasma cutting capabilities, consider the MicroStep SPLR-P machine we have for sale. Contact us for further details. Gsdszzav Eopfx Acijkb - Voltage (Sp.): 400 V 50/60 Hz- Power Rating: 3 kW- Plasma Power Source Brand: Kjellberg Finsterwalde- Plasma Power Source Model: HiFocus 160i PLUS- Plasma Power Source Serial / Art. No.: Art.-Nr. 11.033.702 / 07057- Plasma Power Source Specifications: - Open Circuit Voltage (U0): 330 V - Mains Voltage (U1): 400 V (3~ 50 Hz) - Max Current (I1max): 47 A - Effective Current (I1eff): 47 A - Power / Pressure: P1/min = 0.7 kW, Pmax = 0.5 MPa - Cutting Current Range: 10A / 84V - 160A / 144V - Duty Cycle: 100% at 160A / 144V; 100% at 25A / 90V - Power Source Mass: 196 kg - Protection / Insulation Class: IP 22, . F - Cooling Type: AF- Gas Console / Control Units: Kjellberg PGC and PGV 1- Torch Systems / Cutting Heads: - 1x Plasma Cutting Head - 1x Oxy-fuel / Flame Cutting Head- Control Console: Integrated CNC operator terminal with keypad and display- Filtration / Dust Extraction System: Donaldson Torit DCE

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 403/05, table length: 3,000 mm, power of the servo motor: 1,500 W, table width: 1,500 mm, Equipment: double-sided, With plasma cutting system HyperTherm Powermax 1100 and air drier M.T.A. DE009 Gksdpfew I D Iasx Acieb Machine was used in the production of ventilation ducts and fittings. AsperWin (base program for operating CNC machine for Windows. Dxf-files can be imported) Asper Nesting (enables effective creation of nests with a big number of different cut parts to achieve best possible utilization of material with minimum waste) and Air Select (for ductwork manufacturers enables fast and comfortable design of HVAC components).

Condition: good (used), Year of construction: 2013, Used plasma cutting machine from Haco Gkjdjznun Nopfx Aciob Type: Compact 3015 Table dimensions: 3000 x 1500 mm Hypertherm HPR 130 amp power source Includes spare parts

Condition: used, Year of construction: 2011, total width: 2,400 mm, total length: 4,500 mm, total height: 2,200 mm, Empty weight: 3.000 kg Price: On request Including various accessories, replacement parts and spare parts - Year: 2011 - Documentation available: Yes - CE marking present: Yes Gjdpfxsxrz Hmj Acijkb - CE certificate present: No - Serial number: 289.112 - Drive system: CNC - Control system brand: Beckhoff - Power [kW]: 16.8 - Resonator brand: Hypertherm - Resonator type: Powermax 105 - X-axis travel [mm]: 3000 - Y-axis travel [mm]: 1500 - Max. material thickness [mm]: 32 - Control type: Beckhoff - Transport dimensions: 4500mm x 2400mm x 2200mm (l x w x h) - Transport weight [kg]: 3000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 2019, overall weight: 5,500 kg, total width: 3,000 mm, total height: 2,400 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, product length (max.): 6,000 mm, number of axes: 3, This 3-axis Baykal BPS 2004 CNC Plasma Cutting Machine was manufactured in 2019. It features a cutting table size of 2000 x 4000 mm and is equipped with a Hypertherm XPR300 cutting system, ensuring high-quality cutting capabilities. The machine includes advanced features such as automatic torch height control and True Hole technology. If you are looking to get high-quality cutting capabilities, consider the Baykal BPS 2004 machine we have for sale. Contact us for further details. • Control / cutting system: Hypertherm XPR300 with Optimix gas console; True Hole technology; True Bevel ready; automatic torch height control • Axes: 3 (X, Y, Z) with collision detection • Cutting table: 2000 x 4000 mm • Supported materials: mild steel, stainless steel, aluminium • Drive/mechanics: Helical gear drive; Bosch Rexroth servo motors and controllers • Machine hours: 275 cutting hours • Status/condition: Machine under power; like-new working condition Gkodpjzhvuwofx Acijb

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 30 mm, input voltage: 380 V, cutting speed: 6,000 mm/min, total width: 4,850 mm, total length: 10,150 mm, table length: 6,000 mm, working width: 2,000 mm, table width: 2,000 mm, cutting current: 260 A, working length: 6,000 mm, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, type of cooling: water, height adjustment type: electric, input frequency: 50 Hz, Equipment: double-sided, We offer this used Ajan PP15088 AUTO plasma cutting machine, year of construction 2015. Working area: 2000 x 6000 mm Machine type: PP15088 AUTO Construction year: 2015 Input voltage: 380 V Phases: 3 Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call. Gsdpfx Acoy Annbeiokb

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, working range: 1,500 mm, total length: 4,500 mm, track width: 2,000 mm, table length: 3,000 mm, ZINSER 1225, CNC 6010 Year of manufacture: 2023 Gkodpfx Ajzwvx Iscieb Arc height control ZAC 5070 with Hypertherm plasma system XPR 170 Core Plus Cutting table 1,500 x 3,000 mm incl. extraction system Software available upon request.