Year of construction: 1999, Condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 6, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400m³-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Fgsb Hb Nsu Damdstweb

Condition: new, Working width 318 / 295 mm Working height 170 mm Feb Heu Imn Nsb Ntwogb Motor output 2,25 kW Length of the planing table 1300 mm Number of knives 3 St. Feed speed 5,3 m/min. Dust suction hood 100 mm connected load frequency 400 V machine weight ab. 160 kg Dimensions (L/W/H) 1150 x 530 x 930 mm The planer and thicknesser is delivered almost fully assembled. For thickness planing, the same connection is used for suction as for surface planing used. However, this is placed upwards over the storage table.

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, working width: 230 mm, working height: 120 mm, jointer table length: 2,500 mm, number of spindles: 6, 4-sided planer TECHNICAL DETAILS Number of spindles: 6 Sawing unit: horizontal (glazing bead saw) Spindle arrangement: bottom / right / left / right / top / bottom Saw unit power: 2.2 kW Spindle power: 5.5 / 7.5 / 7.5 / 5.5 / 7.5 / 5.5 kW Fobeualg Ee Hb Ntwogb Working width: 20 - 230 mm Working height: 8 - 120 mm Spindle diameter: 40 mm Dressing table length: 2.5 m Feed rate: 5 - 24 m/min, 4 kW Waxilite pump: manual Rollers in machine table: 2 pieces, driven

Condition: used, working width: 410 mm, planing width: 410 mm, working height: 410 mm, total length: 2,590 mm, Planer, planer SAC 410 mm Specification: • condition - used • working width - 410 mm • length of the tops - 2590 mm • culaga adjustable at an angle • engine power - 4.0 kW • spindle speed - 5000 rpm • manually adjustable planing height • health and safety guard above the shaft • 4-knife shaft with a diameter of 120 mm for traditional knives Fjb Hbowa A R Ee Ntwjgb • start-up 0-1 • output for sawdust extraction - fi 100mm • weight approx. 600 kg • dimensions 259x90x105 cm (length x width x height) Additional information: • acceptable technical condition, after replacing the bearings • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • the price given in the auction does not include VAT

Condition: used, machine/vehicle number: G-ADHM115775cP, AD planing machine Holzprofi STÖ410, 410 mm planing width, 4 blade shaft Fgeb Hbjvw Ebio Ntweb Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Four-sided / 4-sided planer Compact 23 Max. working width 230 mm Max. Working height 125 mm Max. Diameter of profile tools 180 mm Dressing spindle 4 kw Vertical spindle 5.5 kw Upper horizontal spindle 4 kw Lower horizontal spindle 4 kw Fgjb Hb Ntst Dk Rxsweb

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, WEINIG Unimat 500 - 5 spindles - planing width max. 230 mm - Planing height max. 120 mm - Feed electronically frequency-controlled 5-30 m/min. - Feed motor 4 KW - 1st spindle bottom 5.5 KW - 2nd spindle right - motor right / left 11 KW - 3. spindle left with electric axis adjustment FORWARD - BACK - 4. spindle top 7.5 KW with electric axle adjustment HIGH-LOW - 5. spindle bottom 5.5 KW - Spindle speed 6,000 rpm. - Spindle diameter D=40 mm - Dressing table 2,000 mm with jointing ruler - Infeed roller in front of 1st lower tool pneumatic, high-low controlled - Lateral pressure roller in front of the left spindle, moving and spring-loaded - Pneumatic pressure roller - Driven rubber roller in the outfeed table - electronic digital displays to 1/100 mm - Manual lubricant pump - Central positions of the lubrication points - GRP safety hood - interior light in the safety hood - Total connection approx. 36 KW 2x radial CNC-controlled adjustment: - Positioning of the spindle in conjunction with the memory function for spindle no. 3 + 4 Memory system: - For saving the setting values of profiles Fgsbjtqd Nwj Hb Ntweb - Spindle axes with electronic double displays Functions: - Save the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are brought into alignment by manually adjusting the spindle - 99 memory locations Dimensions: - Length 3,320 mm (3,620 mm discharge hood) - Width 1,710 mm - Height 1,850 mm Machine technically and optically in very good condition Price: by arrangement Payment: net cash before loading Delivery time: approx. 2 - 3 months All changes, errors in the technical data reserved. No guarantee on printed data. Subject to errors and prior sale.

Condition: excellent (used), Weinig Profimat 23 four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 4kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 5.5kw Spindle diameter 40mm Working speed 24m/min Fsb Hbov Ealro Ntwegb Pneumatic pressure of the pulling rollers Electric adjustment of the pressure wheels Drive on cardan shafts CE certificate

Condition: good (used), Year of construction: 1983, machine/vehicle number: 616-257, Weinig Unimat 22A four-sided planer. Machine for short material. It has a grooved table. With automatic left spindle (hydraulic) Fsb Hbjwapkfe Ntwsgb

Condition: ready for operation (used), Year of construction: 1995, Functionality: fully functional, machine/vehicle number: 65003/009, working width: 180 mm, planing height: 120 mm, Machine in good condition ready to use complete with double set of tools for rough planing and finishing Fgob Hb Nsv D Iufstwob

Condition: excellent (used), Technical data: Max planing width: 230 mm Max planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 5 1, 4, 5 spindle on a separate engine 2, 3 spindle on one engine Number of upper steel pulling rollers: 4 Number of upper rubber pulling rollers: 3 Diameter of the extraction nozzle: 100, 110, 140 mm Smooth feed adjustment: Feed on cardans Work table lubrication pump 1 smooth roller in the table top Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Total power: 35 kW Overall dimensions: Length: 4860 mm Fgobev Tyg Ej Hb Ntwsb Width: 1640 mm Height: 1670 mm

Condition: excellent (used), Jaroma planer table width 50 cm table length 290 cm shaft with 4 classic knives manual adjustment of the gear at an angle manual adjustment of the table height cast body Fob Hbjv Dtfcs Ntwogb power 7.5 kW

Condition: like new (used), Year of construction: 2023, For sale is a used Hammer A3-31 planer-thicknesser with a planing length of 1400 mm. The machine has been checked by our specialist staff and is in mint condition. Technical data: - Silentpower spiral knife shaft Fgsb Hbjv H Afdo Ntwjb - Planing width 310 mm - Planing length 1400 mm - Max. passage 230 mm - Extractable Ø 120 mm - Motor power 3 kW / 4.1 HP - Year of manufacture 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: planer, thicknesser, planing machine, planing, thicknessing Reference: R-A0117-72

Condition: good (used), WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW Fob Hb Ntov Hqn Towogb feed on cardan shafts with smooth adjustment electric lifting up and down electric adjustment of planing width branded machine preserved in good condition

Condition: used, machine/vehicle number: G-ADHM132618bH, AD planing machine Robland XSD 310, year of manufacture 2000, very good condition, including slotted board, 2.5 kW, 1400 mm table length, 310 mm table width, 3 knives, 250 kg Feb Hbsvw Ebvj Ntwegb Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, Planing and moulding machine Weinig Unimat 22E for four-sided planing and profiling of wood with groove bed for short and curved workpieces, mobile spindle for falling widths, a set of processing tools and a long planing table. spindles: 6 spindle 1: Bottom (5.5 kW) spindle 2: Right (4 kW) spindle 3: Links (5.5 kW) spindle 4: Right (5.5 kW) spindle 5: Top (7.5 kW) spindle 6: Bottom (4 kW) Spindle speed: 6,000 rpm spindle diameter: 40 mm working width: 220 mm working height: 120 mm mobile spindle: Yes groove bed: Yes Fgjbovdu Hhs Hb Ntwjb feed: 5.5 kW / / 6-36 m/min

Condition: good (used), Year of construction: 1997, Functionality: fully functional, Equipment: cabin, 7 Spindle Scm Moulder: Max Working width 230mm Max Working height 160mm Feed Speed 5-40 M/min Diameter of spindles Ø40mm Spindle configuration: 1 Bottom 5.5 Kw 2 Right 5.5 Kw 3 Left 5.5 Kw 4 Top 5.5 Kw 5 Bottom 5.5 Kw 6 Top 5.5 Kw 7 Saws/ Bottom 22 Kw Fjb Hbjtp Dfms Ntwogb Machine comes with some parts and tools incl 4 New 6 knife spindles Ø163x240xØ40 + One full set of tools on the machine.

Condition: ready for operation (used), Working width: 220 mm Working height: 120 mm 5 spindles Spindle arrangement: bottom / right / left / top / right Fob Hb Ntjv Dh Sdowsgb Motors: 5.5 kW, 7.5 kW, 5.5 kW, 5.5 kW Table lubrication Feed speed: 6/22 m/min Year of manufacture: 1990 Machine length: 4400 mm Width: 1700 mm Height: 1250 mm

Condition: new, Exhibition machinemain features:quick changeover system to open the tables,speed, ergonomics and safetywork table adjustment via parallelogramdurable precisiontechnical data:usable working width 520 mmtotal table length 2310 mmcutterhead D 120 mmplaner shaft speed 5000 rpm.4 knives 35 mm x 3 mm x 520 mmaluminum planing fence 1200 mm x 190 mmplaning fence inclination from 90° bi s-45°min./max. planing height 3 / 250 mmfeed speed thickness 5-8-12-18 m/tion stroke diameter dressing 120 mmsuction stroke diameter thickness 120 mmbasic equipment and accessories- work table adjustment in infeed by means of parallelogram system,for chip removal by means of degree scale- simultaneous height adjustment and locking of the work tables completewith anti-tilt device- quick changeover system for changing from dressing to thickness machining(CE version) by means of a special support for opening the dressing tablesand an autom. pneumatic positioning system of the suction hood, withhydraulic system- "READY" electronic control. Includes:* Thicknessing table adjustment* Manual, semi-automatic and automatic modes with 99storable work programs* Additional functions: Calculator and hour meter- Machine table with height adjustment through 4 steel threaded spindles- Feed with independent motorization Thickness- Rubber coated feed roller in outfeed- Link pressure shoes in infeed- Planer shaft and cutter holder with markings as positioning aid, withsetting gauge for planing knives- automatic star delta start for main motor- motor power kW9 Hz50 (kW 11 Hz60) (S6 -40%)[S1] kW7,5 PS10 Hz50 (kW9 PS12 Hz60)[S6 -40%] kW9 PS12 Hz50 (kW11 PS15 Hz60)- Operating toolsSafety/protection- Micro-protection switch for the correct positioning of the dressing tablesand extraction hoods- Dressing protection hood (CE Ausf.)- Automatic motor brake on main motor- Thermal protection switch- 110V auxiliary circuit- Emergency stop switch- Lockable main switch- CE declaration of conformity (CE version)Consisting of:R0.20.20 Linvincibile FS 7 CE version93.07.31 Volt 400 EU93.12.01 Frequency 50 Hz34.02.15 "TERSA" cutterhead with disposable reversible knivesComplete with a set of knives24.06.15 Swivelling auxiliary fence for thin workpieces08.32.28 base Fgsb Hbjvxr Swj Ntwsb

Condition: excellent (used), SCM F520 CE leveling machine Fgsb Hondhdteb Ntwsb Working width 520mm 4kw motor 4 knife shaft Traditional knives Hydraulic lifting and lowering of the work surface Main fence adjustable up to 45 Tops length 3000mm CE certificate

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Fsb Hbewaaq No Ntwjgb Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: used, Planing and moulding machine Weinig Unimat 30 EL for four-sided planing and profiling of large pieces of wood with feed table (homemade) and including planing heads. spindles: 5 working width: 300 mm Fgjb Hb Ntjqzmr Ujweb working height: 160 mm spindle 1: Bottom / Counter bearing spindle 2: Right spindle 3: Left spindle 4: Top / Counter bearing spindle 5: Bottom / Counter bearing Tools: Included Soundproofing: Kaschwig

Condition: ready for operation (used), working width 230mm working height 120mm 5 spindles Fobsrvhhqj Hb Ntwegb spindles set: bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation variable regulated feeder spindles speed 6000 RPM

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Fjbewaaqpo Hb Ntwjgb Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Weinig Powermat 600 2014 year of production 5 spindles 3 kW feed motor 1 7.5 kW motor 2 11 kW motor 3 7.5 kW motor 4 7.5 kW motor spindle configuration - bottom, right, left, top, bottom Fgebov Dac Ie Hb Ntwsb soft start heated control cabinet (webasto) pneumatic tables manual control of the tops electronic brakes manual axis adjustment smooth feed regulation