Used panel saws with a cutting length from 4000 to 4999mm for sale (75)

Condition: used, Panel saw, panel dividing saw, horizontal panel circular saw, dividing saw Gjdpfxob R Addo Admeil -Motor power: 6 kW -Speed: 2880 rpm -Diameter max. Saw blade: 340 mm -Cutting height: 100 mm -Saw motor laterally adjustable on dovetail guide: approx. 1000 mm -Saw motor pneumatically adjustable in height -with cleaning brush: 1000 mm wide -Max. Intermediate width: 1700 mm -Dimensions: 2200/1500/H2100 mm -Weight: 1220 kg

Condition: used, Numerical Control OSI Working dimensions mm 4300 x 2200 Automatic rear load with lifting table (mm) 4300 x 2200 Max blade protrusion (mm) 125 System for lifting and rotating the panels inside the machine Device for cutting thin panels (4 mm approx ) N. 10 pliers on the upper main pusher carriage N. 4 pliers mounted on the lower independent pusher carriage Twin Pusher Double lateral aligner Scoring group (max blade diameter / power) 180 / Kw 2,2 Main blade group (max blade diameter / power) 430 / Kw 15 Adjustable speed of the blade carriage (m / min) 1 - 150 N. 4 front benches for panel discharge air veil Gijdpfx Ajxt Sgtedmsl

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 00103, feed length X-axis: 4,800 mm, feed length Y-axis: 4,800 mm, feed length Z-axis: 100 mm, cutting length (max.): 100 mm, cutting height with scoring (max.): 90 mm, saw blade diameter: 400 mm, cutting height (max.): 110 mm, total length: 7,500 mm, total height: 1,700 mm, total width: 6,600 mm, overall weight: 7,700 kg, input voltage: 380 V, compressed air connection: 7 bar, Panel saw with a cutting length of 4500 mm, equipped with a rear table for panel loading. The machine is operational and will be disassembled due to installation of a new machine. Gedpfoxwqlpox Admjil

Condition: excellent (used), functionality: fully functional, cutting length (max.): 4,200 mm, cutting height with scoring (max.): 70 mm, saw blade diameter: 305 mm, feed rate X-axis: 40 m/min, feed rate Z-axis: 50 m/min, saw drive: 90,000 W, input frequency: 50 Hz, type of input current: three-phase, space requirement length: 4,200 mm, space requirement width: 4,200 mm, Equipment: rotational speed infinitely variable, scorer, Technical Main Data: Cutting length: 4200 mm Cutting height: 70 mm Saw blade diameter: 305 mm Scoring blade diameter: 200 mm Saw motor: 9.0 kW EM 4149 Scorer motor: 1.1 kW (can be switched off) Feed speed: 2–40 m/min (infinitely variable) Rapid return: 50 m/min Table dimensions: 4200 x 4250 mm Gjdpfx Adjwrn Rbjmeil Operating system: Linux (incl. USB, LAN, remote maintenance) Monitor: 15" flat screen with multifunction keyboard Features & Special Equipment: Automatic forward and return movement of the saw unit with lowering function Externally adjustable scorer—no need to open the safety cover 3-stage cutting height setting LA 4143 7 recesses in the clamp beam for residual cuts (min. 5 mm) Material feed table with servo drive, rack-and-pinion guide, 7 clamping fingers Air cushion tables HP 5025 & HP 5085 with abrasion-resistant “Pertinax” laminate top OPTIMIN optimization software for automatic cutting plan generation Cutting plan display & graphical workflow overview Remote maintenance via TeamViewer and Remote Desktop Condition & Service: Condition: Very good Functionality: Fully operational Warranty: 12 months CE-compliant and tested for dust emissions (limit < 2 mg/m³) Reliability in Continuous Operation: This machine is used worldwide under extreme conditions. Whether in the dry climate of Africa or in high humidity environments like Southeast Asia (e.g., Thailand): the PA 4137 operates reliably in three-shift systems, 365 days a year—renowned for its exceptional stability and endurance. Warranty: We are so confident in the quality and stability of our machines that we offer a 7-year warranty on the machine frame and guideways. (Electrical supply parts and wear parts excluded.) Flexibility & Customization: We offer various models and equipment variants to suit every budget. Additionally, we provide tailor-made special solutions according to your requirements. Extensions & modifications available upon request 📞 Contact us for a customized quote or to schedule a viewing appointment. Machine available from stock. Delivery, commissioning, and training optionally available.

Condition: used, Year of construction: 1996, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 272 / 9-604, cutting length (max.): 4,300 mm, cutting height (max.): 2,200 mm, main saw diameter: 300 mm, total width: 5,700 mm, The machine is used and in good overall condition. It is fully functional. It has only been used occasionally as needed (not daily) in the advertising technology sector. Cutting length: 4300 mm, cutting height: 2200 mm, motor power: 5.5 kW, equipped with Super Cut scoring unit, saw blade: 300 mm. Gijdpfx Adsw I Er Temjl IMPORTANT: The saw is available for demonstration. The technician who installed the saw can, if required, assist with dismantling for an additional fee.

Condition: good (used), Year of construction: 1999, cutting length (max.): 4,200 mm, cutting height (max.): 115 mm, Panel saw with lifting table loading Manufacturer Scheer Type PA 7004 horizontal panel dividing saw with automatic lifting table loading with cutting optimization software in 11.2020 new PC with DNC-AT control, operating system Linux with PA software S5 Cutting length 4200 mm Travel path of the material pusher 4250 mm Cutting height 115 mm Maximum saw blade projection 135 mm Panel saw size FM22 Main saw blade maximum diameter 450 mm Scoring saw blade maximum diameter 200 mm Saw blade bore 30 mm Feed speed of the saw 0-100 m/min. Return speed of the saw 100 m/min. Number of collets 7 pieces Feed speed of the material pusher in the forward direction 30 m/min, in the return direction 70 m/min. Remaining section device SP5004 Saw motor 11 kW, scoring unit 2.2 kW Saw feed motor 1.1 kW, table feed motor 1.63 kW Lifting table motor 4 kW, drive motor for roller conveyor 0.37 kW Total power 20.4 kW Front air cushion support tables 3 pieces Width of the tables 800 mm, length 2000 mm Compressed air maximum 6 bar, limit pressure 7 bar Compressed air hose diameter 10 mm Air consumption approx. 15 liters per cycle Angle pressing device WP 5033 Lifting table device with driven roller conveyor Dimensions 1700 mm x 4700 mm 3 x suction connection diameter 120 mm Godpfevyyn Nox Admeil Documentation available Declaration of conformity available

Condition: excellent (used), Year of construction: 2003, operating hours: 12,608 h, functionality: fully functional, machine/vehicle number: 0-241-06-5232, cutting length (max.): 4,300 mm, cutting height (max.): 125 mm, cutting width (max.): 2,200 mm, Panel Saw Holzma HKL11/43/22 Max. cutting width: 4300 mm Max. cutting length: 2200 mm Godsxfvp Ajpfx Admsil Max. cutting height: 125 mm The saw is in continuous operation, so viewing during operation is possible. The machine will be available from 02/03/2026.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, feed length X-axis: 4,300 mm, feed length Y-axis: 4,300 mm, cutting length (max.): 4,300 mm, cutting height with scoring (max.): 4,300 mm, saw blade diameter: 380 mm, HPP 380/43/43, fully automatec loading with TBP 200/31/22/ Main motor 18.5 kW Machine works perffectly, possible test run Holzma Profi HPP 380 Cutting length: 4,300 mm Cutting width (program-controlled pusher travel): 4,250 mm Air cushion table: 2,160 x 650 mm, 3 pcs. + 1* 2,810 mm length Gjdpfx Adjxvz T Iemeil Central blower: 1 unit with increased blower performance 2 additional alignment devices Technical Data: Saw blade projection: 95 mm Saw carriage feed: forwards 1–130 m/min, backwards constant 130 m/min Main saw motor: 18 kW Scoring saw motor: 2.2 kW, VVSH aggregate, program-controlled, vertically rising Operating voltage: 400 V (+10%/-5%) / 50 Hz Electrical connection rating for main saw motor 18 kW: 24 kW Power Control CADmatic 4.0 control with 17-inch flat display Labeling with part graphics / label program / label printer PICA 104

Condition: good (used), Year of construction: 2012, Selling on behalf of a customer: ELCON 215D panel saw Gijdowrm Dgepfx Admjl Year of manufacture: 2012 Immediately available Little used - very good condition Max. vertical cutting height: 2150mm Max. horizontal cutting height: 2105mm Max. cutting depth: 60mm For more details on the machine, see PDF file

Condition: used, functionality: fully functional, For sale is a combination of two saws connected to a Bargstedt warehouse: HPP380 + HPL380 (including slotting table) + TL420 Giedpfowkhcbjx Admsl

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Giodpfx Aetk It Sodmel Subject to incorrect technical data presented

Condition: used, Year of construction: 2005, functionality: fully functional, Manufacturer: HOLZMA Model: OPT HPP 350/43/43/X Machine type: Beamsaw Year of manufacture: 2008 Operating status: still connected Gijdoxwwfvjpfx Admel Cutting length 4.300 mm Width of lifting table 2.200 mm Number of grippers 8 Feedrate max 150 m/min Saw blade projection 80 mm Saw blade diameter max 350 mm Scoring saw Yes Labelling manually Lift table loading from behind Stop side Right side HOLZMA | HOMAG Machine table with air nozzles throughout Control HOLZMA CADMATIC 4.1 Declaration of CE-conformity Conformity marking CE mark Space requirement Length 8,2 m Space requirement Width 6,5 m

Condition: excellent (used), Year of construction: 1995, Max. panel width 4400 mm Max. panel length 4300 mm Main saw blade projection 110 mm No of Grippers 8 Front Loading Beam Panel Saws Max. saw blade projection 110 mm Front support tables no. tables 4 Control system NC 410 Gsdpfsmt Hhwsx Admeil Safety standard CE mark Total installed power 20 KW

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Additional key for office programming software Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 90 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 11 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher carriage with 9 clamps Blade carriage speed 120 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Gsdpjvtbzkefx Admjil

Condition: excellent (used), Year of construction: 2011, operating hours: 20,000 h, functionality: fully functional, cutting length (max.): 4,300 mm, cutting width (max.): 4,300 mm, HOLZMA HPP 350/43/43 from 2011 The machine is 100% efficient, dismantled and ready for transport. The machine has worked 20 thousand mth Gedpfx Adevzxa Tjmoil Complete documentation for the machine. We provide a start-up WARRANTY!! Possible transport

Condition: new, Year of construction: 2024, TECHNICAL DETAILS: Gisdpfx Adeq Rvymjmol -Max. length of horizontal cut :mm 4200 -Max. length of vertical cut :mm 4200 -Max. height of cut :mm 2200 -Max. height of horizontal cut :mm 2080 -Max. depth of cut :mm 60 -Motor output :HP 5 (3.7 KW) -Blade diameter :mm 250 -Blade speed :rpm 5300 -Manual shifting frame, with visual reminders. -N° 4 positioners for horizontal cuttings. -N°1 Stop for vertical cuttings. -Short piece cutting device (L. 2340 mm), to support small panels. -Lift-up Rollers. -SELF-BRAKING motor. -V.400/3/50Hz. - pre-arranged for independent dust extraction -All standard accessories: safety device, soundproofing, set service tools, user’s manual. Optionel (not included in the price) Electronic Vertical measuring display Euro 1000,00 Optionel (not included in the price) Electronic Horizontal measuring display Euro 1000,00 ( not installed on the machine )

Condition: ready for operation (used), Year of construction: 1998, Brand: Schelling Model: FL430/410 Gsdpexf Idxjfx Admeil Machine no.: 211.178 Year of manufacture: 1998 With front and rear feed Technical data Saw length 4200 Pusher 4100 Setup 7×10 m (length×depth) Lifting table 6.5 tonnes

Condition: excellent (used), Year of construction: 2022, Selco WNT 630 Beamsaw working size 3800x2200 with back lift table Technical specifications: Max cutting lenght: 3800 mm, Saw blade projection: 108 mm, Max gripper opening: 100 mm, Min panel size: 1830 x 915 mm, Gijdpfev T Sdijx Admol Max panel size: 3660 x 2200 mm, Max packet hight: 630 mm, Min. thickness on lift table: 10 mm, Lift table max lift: 985 mm, Lift table capacity: 5 t Back loading table or side loading oppening for panels 3800 x 2200 mm

Condition: used, Year of construction: 1999, functionality: fully functional, cutting length (max.): 4,500 mm, saw blade diameter: 30 mm, cutting height (max.): 90 mm, cutting width (max.): 4,500 mm, power: 16 kW (21.75 HP), Cutting length 4500 mm Cutting width 4300 mm Cutting height 90 mm Saw blade diameter max. 350 mm Main saw motor: 7.5 kW Scoring saw blade diameter max. 160 mm Scoring unit motor power 1.5 kW Air cushion tables: 3 pcs 1230 x 400 mm Clamping jaws 7 pcs Saw carriage height adjustment on THK guides Pressure beam with slots (pass through) Side aligner Pneumatic quick-release saw blade system Extraction diameter 4 x 120 Installation dimensions L x W 6700 x 7100 mm Giodowu Ib Sspfx Admsl Weight approx. 2500 kg

Condition: used, Year of construction: 2019, Numerical Control with WINCUT software Printer for barcode labels Cutting length mm 4300 Cutting width mm 4300 Blade projection mm 110 Double lateral aligner with pneumatic rubber cylinder N° 1 Fixed front Bakelite table with air curtain system and lateral guide for loading \ unloading panels N° 3 Adjustable front Bakelite tables with air curtain system for loading \ unloading panels Engraving unit (max blade diameter / power) Main blade unit (max blade diameter / power) 20 hp (15 kw) Optimized blade / presser ascent in self-learning Electronic adjustment of the engraver Adjustable speed of the blade carriage m/min 150 - 170 Speed of the pusher carriage m\min 0-90 Pusher carriage with n° 7 clamps TECHNICAL DETAILS TO BE VERIFIED Gsdpfx Adowcdymjmeil

Condition: excellent (used), Year of construction: 2011, Panel saw with cutting length 4500mm Pusher depth 5580mm Lift table width 2200mm Number 7 clamps Gijdpfjwq Iqxsx Admjl Feed speed 170m/min Blade 450mm Blade projection 125mm

Condition: good (used), NUMERICALLY CONTROLLED PANEL SAW WITH AUTOMATIC LOADING  Brand: BIESSE SELCO  Model: EBT 120 L, CE  Availability: Immediate Description:  Solid, reliable and versatile panel sawing centre, able to satisfy the needs of all types of customers: from the small company looking for maximum simplicity in use, to the medium-sized company that works on multiple shifts or that wants to automate the process, up to the large company that works in batches.  Base: The single-shoulder structure makes the carriage/base assembly extremely compact. The guides are fixed to the base along their entire length to ensure maximum linearity of the stroke. The blades rise on prismatic recirculating ball guides that ensure perfect perpendicularity with the work surface, resulting in an excellent cutting finish.  Carriage and blade travel on prismatic guides: maximum rigidity and perpendicularity of the blade to the panel stack. Drastic reduction of friction and wear of materials, even at the highest speeds. Maximum stability over time of the linearity of the travel and the characteristics of the structure.  Presser: the openings made in the pressing bar eliminate the interference zone with the clamps allowing complete use of the panels with small tail cuts and trims as desired.  Blade carriage: The transmission of motion to the blade carriage carried out with a pinion/rack offers greater fluidity of translation and a better cutting finish  Material parking: by moving the tables it is possible to create a parking area for machined pieces and bars outside the cutting line. Technical characteristics: • Cutting dimensions mm. 4,400 x 2,200 • Lifting table dimensions mm. 4,960 x 2,270 • Blade projection mm. 122 • Blade diameter mm. 430 • Scoring diameter mm. 300 • Blade carriage speed m/min. 0-130 • Pusher speed m/min. 60 max with Bruschless motors • Pusher stroke mm. 5,240 • Total installed power Kw28 • Operating pressure Bar 7 • Suction nozzles: 1 x 200mm. - 1 x 150mm. – 2 x 100mm. • Machine dimensions 8,788 x 7,198 mm. • Machine weight KG 7,500 • Machine documentation: use and maintenance manual, software manual, spare parts catalogue, wiring diagram, CE declaration of conformity. Optionals: • Lateral aligner with two pressure elements • Comb stop for material with protruding edge • Loading lift table • Front aligners for automatic loading • Front air curtain tables no. 4 • Pneumatic grippers no. 7 • The blade protrusion is automatically adjusted based on the thickness of the pack to have maximum precision even when cutting a small number of panels • Electronic adjustment of the scoring blade • The alignment of the scoring blade with respect to the main blade is carried out from the outside of the machine body, with the blades in motion and in absolute safety • Quick and safe blade change with pneumatic locking device Gedpfevvb Agjx Admoil

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 021.06.440, cutting length (max.): 4,400 mm, main saw diameter: 380 mm, controller model: G-DRIVEAXS BASIC, working height: 1,050 mm, Equipment: scorer, TECHNICAL DETAILS Cutting length: 4,400 mm Cross-cutting machine width: 1,525 mm Gsdpfexf Eg Dox Admoil Saw blade protrusion: 105 mm Main blade diameter: 380 mm Scoring blade diameter: 180 mm Lift table dimensions: 4,400 mm × 1,600 mm Working height: 1,050 mm Minimum book height: 10 mm Minimum thickness when loading: 10 mm Minimum panel size when loading: 2,440 mm × 1,220 mm Maximum panel size when loading: 4,200 mm × 1,600 mm Maximum gripper opening: 110 mm Number of grippers for longitudinal stop: 5 Number of grippers for cross stop: 8 Feed speed of saw carriage: 5 to 100 m/min Feed speed of pushers: 1 to 40 m/min Return speed of pushers: 60 m/min MACHINE DETAILS Control system: G-DRIVEAXS BASIC Main motor output: 18 Hp 13.2 kW Number of front aligners (longitudinal area): 3 Number of side aligners (crosswise, lower): 2 Number of side aligners on pressure beam: 2 EQUIPMENT Left-hand configuration Side conveyor belt for loading

Condition: used, Year of construction: 2016, Angular panel saw with automatic pre-loading and twin pusher system for optimised cutting Osi Plus Numerical Control Os Labelling labelling machine with on-board graphic labelling with part drawings Label printing management software Optiplanning Cutting Optimizer Cutting length mm 4500 Cutting width mm 2200 Blade projection 95 mm Motorized rollers for lateral loading on lifting table 4500 x 2200 mm. The translation speed is 10.8 m\min (50hz) - 13.1 m\min (60hz) Automatic recognition of the lost panel (martyr panel) based on the thickness specified in the machine data Low battery stop Automatic side loading buffer. Includes: perimeter nets, double photocell, push-button panel, predisposition electric for the two motorized pre-rollers and the amplification of 4 rollers in place of the fork passages in the pre- intermediate roller conveyor Pre-loading side roller conveyor dim 3800 x 2200 mm with motorized rollers (height from the ground 325 mm) Inertial conveyor for conveying longitudinal trimmings for angular systems 4500 mm (total length 7295 mm) 3000 mm extension to the inertial conveyor to also convey transverse trimmings Long chute for manual conveying of cross-cut trimmings to the centralized inertial conveyor 2050 x 850 mm air curtain discharge table with wheels at the front Gsdpfx Asuc Idxsdmsil Air generator up to 6 floors with air curtain MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the transverse plane. The presence of this device allows to reduce from 1830 to 1220 mm is the minimum length of the panels that must be sent for cross-sectioning. Automatic blade shaft bending detection device for angular systems (longitudinal and transversal) consisting of a sensor that detects the deflection directly on the blade shaft and a device that detects the revolutions blade directly on the spindle. Remote cycle start button panel Automatic panel loading via rear lifting table Automatic double aligner with pneumatic cylinders Additional movable lateral aligner on the transverse plane Main blade, max diameter mm, KW 15 Scoring blade, max diameter mm, KW 2.2 Blade carriage speed 1-140 m/min. – BRUSHLESS motors Longitudinal pusher carriage speed 90 m/min. Cross pusher carriage speed 135 m/min. Double pusher carriage with 6 grippers on the longitudinal carriage + 10 grippers on the transverse carriage (8 fixed grippers + 2 on the multi-push system) Cutting system for thin panels

Condition: used, Year of construction: 2017, Osi Plus Numerical Control QUICK OPTI software for cutting pattern optimization directly on the machine Cutting optimization software OPTIPLANNING PROFESSIONAL version Barcode Label Printer - OS-Labelling Electrical cabinet air conditioner Cutting length mm 4400 Cutting width mm 4300 Blade projection 75 mm Manual front panel loading Lateral aligner integrated into the blade carriage No. 1 fixed front bakelite table with air curtain system for unloading the panels (mm 2050 x 850) No. 3 adjustable front bakelite tables with air curtain system for unloading the panels (mm 2050 x 650) Main blade group (max. blade diam. / power) 355 mm / 7.5 kW Engraving group (max blade diam. / power) 200 mm / Kw 2.2 Adjustable speed of the blade carriage Pusher wagon with 10 clamps Blade carriage speed 1-120 m/min Pusher speed 60 m/min Twin Pusher 1.2 system with 1 additional clamp on pusher carriage (position 570 mm) to perform different patterns cutting at the same time TECHNICAL DETAILS TO BE CHECKED Gjdpov Amx Tsfx Admsil