Used Holzher Beam Saw for sale (167)

Condition: excellent (used), Pressure beam saw HOLZ-HER Cut 70 6110 -used- PC control with optimization, scorer unit, automatic cut length detection, side pressure device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical Data ----- Cutting length: 3900 mm, cutting width: 3100 mm, max. cutting height: 70 mm, number of grippers: 6 pcs, max. saw unit feed: 0-70 m/min, max. rip fence feed: 25/70 m/min, main saw motor power: 11 kW, scorer motor power: 1.1 kW, main saw blade Ø: 350 mm, scorer saw blade Ø: 180 mm, dust extraction port Ø below: 120 mm, Ledpfxsyu N Rge An Ujab dust extraction port Ø on pressure beam: 3 x 120 mm, nominal current largest consumer: 20.6 A, max. fuse: 35 A Quality Info: - Saw spindle newly mounted - Scorer newly mounted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Condition: like new (used), Year of construction: 2004, I sell the panel beam saw HOLZ-HER CUT85. Year 2004. Cutting size 3200x3200mm. Laedpfxjppwtve An Ueb Cutting height 85mm. Max saw blade diameters 350 + 180mm Main motor 11kW Scoring motor 2,2kW Total power 15kW Total area covered W.5636mm x D.6520mm 6 pcs. gripper with pneumatic regulation Side alignment top roller with pneumatic stroke. Optimising software included. Label printing included. Very good condition. Available immediately.

Condition: ready for operation (used), Year of construction: 2007, cutting length (max.): 4,250 mm, Panel saw manufactured in 2007. This HOLZHER 6310 CUT 110 features a cutting length of 4250 mm and a cutting width of 2700 mm. It includes a Cut Control system with touchscreen operation, a saw carriage with main and scoring saw, and a grooving unit with adjustable depth settings. If you are looking to get high-quality cutting capabilities, consider the HOLZHER 6310 CUT 110 panel saw we have for sale. Contact us for further details. • Condition note: not rebuilt – without warranty Lasdpjy N Scpsfx An Ujb • Cutting width: 2700 mm (original 5250 mm, shortened by 2550 mm to 2700 mm) • Screen on the right • Control: Cut Control system with touchscreen operation • Angle clamping device on the right • Saw carriage: main/scoring saw controlled • Motor power: 18.5 kW (main) / 2.2 kW (scoring) • Scoring saw: manual adjustment in width and height • Grooving unit: 2 groove height settings (groove depth adjustable 2–12 mm, up to max. 9–19 mm) • Label printer: TLP2742 • Cutting-out unit • Additional blow-off unit traveling with the saw carriage • 3 additional support tables, 2400 mm, with travel mechanism • Control cabinet on machine side, incl. speed monitoring with safety shut-off • Postforming unit, incl. scoring unit • Automatic central lubrication • Enclosed pressure beam • Film cutting device Additional equipment • Optional at extra charge: Dust extraction system (€4,000.00) • Brand: AL-KO • Model: POWER UNIT 300P • Year of manufacture: 2011 • Airflow: 5089 m³/h • Vacuum: 2050 pA • Motor power: 7.5 kW • Suction inlet: 300 mm • Collection: 3 tanks, 250 l each • Integrated automatic shut-off

Condition: ready for operation (used), Year of construction: 2011, total width: 4,200 mm, total height: 2,900 mm, overall weight: 700 kg, Panel saw manufactured in 2011. This HOLZHER 1255 3858/1-101 features a maximum cutting length of 3,300 mm and a cutting height of 2,200 mm, providing versatile cutting capabilities. With a powerful 4.0 kW saw motor and integrated control system, it ensures precision and efficiency. Consider the opportunity to buy this HOLZHER 1255 3858/1-101 panel saw. Contact us for further details. • Cutting capacity: horizontal 3,300 mm; vertical 2,200 mm; cutting depth 60 mm • Saw motor power: 4.0 kW • Electrical: 400 V, 50 Hz • Blade diameter: 250 mm • Blade speed: approx. 5,450 rpm • Cutting directions: vertical and horizontal • Angle cutting device: 0°, 22.5°, 45° • Dust extraction interface: port diameter 120 mm; required capacity approx. 1,400 m³/h • Control system: Integrated HOLZ-HER control (electronic positioning system) • Safety equipment: full blade guarding; two-hand safety control; mechanical hold-down system Laedpfx Asy Nxkysn Ueb Dimensions Machine Depth 1600 mm

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 974/1-810, functionality: fully functional, operating hours: 1,483 h, workpiece height (max.): 60 mm, feed rate X-axis: 18 m/min, controller model: Edge Control 19 mit 18,5" Touchscreen, The machine was last serviced in February 2026! The machine has the following configuration: Grooving cutter head 1802 Motor power: 2 x 2.0 kW 1. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation for grooving cutter head 2. Cutter: Diamond Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation for grooving cutter head Edge feeder 1901 SYNCHRO (fully automatic) Glue application station Glu Jet GJ301 (automatic) Power: 2.3 kW, 50 Hz Cartridges: Storage compartment for 14 cartridges (1.4 kg) GluJet collection container Pressure unit 1913 MOT Cutting unit 1918 (60 mm) pneumatic Multi-function cutter head 1826 MOT4 Motor power: 2 x 0.65 kW Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, left-hand rotation Air Stream System cutter: Diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2 mm, right-hand rotation Profile cutter head 1833 MOT4 1. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, left-hand rotation with CM technology 2. Cutter: Diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 Radius R = 2 mm, right-hand rotation with CM technology Scraping blade unit 1929 MOT4 Carbide indexable inserts for scraping blade holder R = 2 mm (2 pcs. required) Surface scraping blade FK 701 Smoothing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 rpm) Spray device 1856 TECHNICAL DETAILS Feed speed: 10 - 18 m/min Workpiece length min: 160 mm Workpiece width min: 60 mm Workpiece thickness: 8 - 60 mm Edge height max.: 65 mm Edge thickness roll material: 0.4 - 3 mm Edge thickness strip material max.: 8 mm Laodpfx Aney Tw Edj Ujb MACHINE DETAILS Control: Edge Control 19 with 18.5" touchscreen Infeed guide length: 1,350 mm Electrical system for stepless feed: 400 V / 50 Hz Feed electric motor: 2.2 kW Operating hours: 1,483 h EQUIPMENT Motorized pressure bridge adjustment Nesting - touch probe vertical top & bottom Edition 18 package ECO MODE energy-saving mode ITronic system

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Storage location: Nattheim Laedpfx Anjvvi Nbs Usb

Condition: ready for operation (used), Year of construction: 2013, Edgebander manufactured in 2013. This HOLZHER Streamer 1054 features a premilling unit with diamond tools, capable of handling workpiece thicknesses up to 60 mm. It includes a Glu Jet S cartridge system for glue application and a pneumatic end trimming unit. The machine also offers a trimming unit for flush or radius edges, with a radius capability of up to 3 mm and edging thickness up to 6 mm. For more information about this machine, please reach out to us. • Premilling unit: diamond tools • Workpiece thickness: up to 60 mm • Glue application: Glu Jet S cartridge system (EVA / PUR) • End trimming unit: pneumatic • Pressure unit: 3 rollers (first roller motor-driven) • Trimming unit: flush / radius • Radius: up to 3 mm • Edging thickness: up to 6 mm • Scraper units: radius scraper (R); flat scraper (glue removal) • Automatic edging feed: coil or strips Lodpfx Aoy Ddycjn Uoab

Year of construction: 2018, condition: ready for operation (used), travel distance X-axis: 3,700 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 120 mm, total width: 4,600 mm, total height: 2,500 mm, spindle motor power: 10,000 W, product length (max.): 13,500 mm, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis HOLZHER Dynestic 7535 was manufactured in 2018. It features a working area of 3700 x 2100 x 120 mm and a powerful 10 kW spindle with a speed of 24,000 rpm. The machine includes an 18-position tool changer and a complete CNC nesting solution for high-performance cutting and drilling capabilities. If you are looking to get high-quality woodworking capabilities, consider the HOLZHER Dynestic 7535 wood mill we have for sale. Contact us for further details. Lajdoyzp H Njpfx An Ujb • Control: Beckhoff TwinCAT 2 (PC-based) • Software: WorkCentre, NC-Hops, Cabinet Control, CAMPUS v7 • Tool holder: HSK-F63 • Tool changer: 18 positions (gantry-mounted) • Drilling unit: 10 vertical, 3 horizontal (4 X, 2 Y) • Saw unit: Groove saw integrated in X direction • Table type: Matrix table (gantry construction) • Automatic tool measurement: up to Ø20 mm • Power: 22 kW • CE marked • Key features: Complete CNC nesting solution; high-performance cutting and drilling; advanced control with DXF compatibility; auto lubrication and cooling system; offline programming capability included • Additional services available upon request: • Mechanical and electrical decommissioning, as well as installation support • Basic application training (HOPS), depending on the operator’s experience • After-sales service, including warranty and potential service interventions handled by the seller (T&Cs apply)Please feel free to ask us for detailed pricing regarding these additional services. Additional equipment • Vacuum system: Becker, 250 m³/h • Air cushion table for easy material handling • Zoned safety mats for safe loading during operation • Additional saw blade holder (up to Ø350 mm)

Condition: ready for operation (used), Year of construction: 1994, Holzher 1245 Superslide electromotoric height adjustment with digital display electromotoric tilt adjustment with digital display Lsdpfsy Sgxdjx An Ujab Cutting length with sliding table mm 3200 Crosscut length with sliding table mm 3200 Cutting width mm 1250 Table size mm 1100 x 800 Max saw blade diameter mm 450 Saw blade bore mm 30 Saw tilting range 0-45° Maximum cutting height at 450 mm Ø mm 150 Cutting height at 45° at 450 mm Ø mm 106 Motor power kW 7.5 Saw motor speeds rpm 3/4/5000 Extraction port Ø mm 80/120 Machine weight approx. kg 930 Connection value V/Hz 380/50 Year of manufacture 1994 Price 5200.-

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 4,100 mm, travel distance Y-axis: 1,560 mm, travel distance Z-axis: 320 mm, number of axes: 3, spindle motor power: 12,000 W, This 3s HOLZHER dynestic 7507 was manufactured in 2017. It features an X-Axis stroke of 3100 mm or 4100 mm, a Y-Axis stroke of 1560 mm, and a Z-Axis stroke of 320 mm. The machine offers a vector speed of 110 m/min and a main spindle power ranging from 6 kW to 12 kW. If you are looking to get high-quality CNC wood machining capabilities, consider the HOLZHER dynestic 7507 machine we have for sale. Contact us for further details. • Machining height: up to 80 mm from top of suction cups • Vector speed: 110 m/min • Main spindle: 6–12 kW (air or liquid cooled) • Drilling head: 14–24 spindles (depending on configuration) • Tool changer: 6, 12, or 18 stations Additional equipment Laodoyi D Enspfx An Ujb • Vacuum pump(s): 250 m³/h per pump (up to 500 m³/h total)

Condition: used, machine/vehicle number: 008018, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 20 m/min Lajdpfewv Dfcox An Usb Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: used, Edgebander Holzher Streamer 1057 Pre-milling cutters Glue application, GLUE JET cartridge system Suitable for PUR glue Equipped with glue discharge Pneumatic pre-cut guillotine Laedpfeyrq Eaex An Uob Pressure rollers Final trimming saws adjustable at an angle Top and bottom milling units R1, R2 Corner rounding unit Profile scraper Flat scraper Max edge height mm: 60 Max edge thickness in roll mm: 3 Feed speed 10m/min Comes with fluids Polishing unit

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Lodpfx Aowwiybjn Usab

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Laedowwhn Dopfx An Usb

Condition: used, machine/vehicle number: 008369, X axis working area: 3100 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 10 KW Lsdpfex A Tinjx An Ujab Number of controlled axes: 4 axes Total number of drilling spindles: 14 Total number of tool changer positions: 6

Condition: used, Year of construction: 1987, total length: 4,300 mm, total width: 1,350 mm, total height: 2,550 mm, Colour: Grey Weight: 1.250 kg - Year: 1987 - Documentation available: No - CE certificate present: No - Serial number: 1454/8- 75 - Max. cutting height vertical [mm]: 1900 - Max. cutting width [mm]: 3300 - Min. saw blade diameter [mm]: 100 - Horizontal cutting: Yes - Vertical cutting: Yes - Transport dimensions: 4300mm x 1350mm x 2550mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Lasdpfow Rm Insx An Uob Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2021, Used machine Year of manufacture: 2021 Cutting length: 5300 mm Cutting height: 2200 mm Vertical panel saw for cutting sheet-type wood materials such as chipboard, MDF panels, veneer panels, multiplex, etc. Base machine Completely welded frame with extremely high rigidity Precise guidance of the saw beam / saw unit for accurate cutting. Automatic feed for vertical and horizontal cuts. Cutting depth: max. 60 mm Saw beam Sturdy saw beam guided on precision rails. Pneumatic latching of the saw beam in the upper and lower positions. Electric monitoring during vertical cuts Saw unit Smooth and ergonomic operation for plunging and retracting the saw unit. Plunge lever can be folded down from the upper position for precise entry. Generously dimensioned levers for easy swiveling. Housing cover opens the complete saw unit for easy tool changes, including ProLock quick-release chuck. View opening: riving knife can be retracted Automatic functions Automatic plunge, cut-through, retract, and stop or Automatic plunge, cut-through, retract, and return Shortened return travel (selector switch) The shortened return travel of the saw beam prevents unnecessary travel paths of the saw unit (short workpiece positioned on the right) Speed control: infinitely variable from 6 - 24 m/min Cutting depth: max. 60 mm Control panel Efficient operation of the machine. Ergonomically mounted at eye level. Lower workpiece support Stable, wear-free stainless steel support. Support up to the cutting line: narrow workpieces cannot tip or fall through. Extraction Effective extraction with two ports: saw unit Ø 120 mm, frame end Ø 100 mm (for TRK version) Lifting roller transport system: Manually raiseable and lowerable rollers for easy and gentle panel transport. Measuring tape For dimension display in horizontal cutting with three manual measurement displays: Absolute measurement from the lower workpiece support Absolute measurement from the middle workpiece support Series cuts from the top edge of the panel Powerpackage The package consists of the following options: 1. TRK extraction system 2. SuperCut scorer 3. Vertical digital display Lasdpfeyuld Aex An Uob 4. Stepless speed regulation Saw unit 7.0 kW, 1100–5500 rpm, 400 V, 50 Hz Incl. HW circular saw blade Ø 250 x 30 x 3.2 mm, Z 48, hollow-flat tooth TRK system according to CE guidelines SH 2200 (less than 2 mg fine dust/m³ of air) – mandatory for all CE-required countries (extraction system provided by customer) Pneumatic shifting grid Continuous shifting grid over the entire machine length for stable workpiece support. Automatically, pneumatically retracts during horizontal cuts. Prevents the shifting grid from being cut during horizontal cuts. Digital measurement display for horizontal cutting on the control panel Incl. electric fine adjustment Display of: Absolute measurement from the lower workpiece support OFF-Set measurement from the middle workpiece support Series cuts from the top edge of the panel Saw blade compensation (saw blade thickness can be individually programmed) If the unit is operated via the brake at the ba... (text cut off)

Condition: excellent (used), Panel Saw HOLZ-HER 1255 SECTOR pro – used – • Welded frame with extremely high rigidity • Pneumatically retractable support grid • Sturdy saw carriage latching mechanism at top and bottom • Electrically monitored latching in vertical cutting mode • Foldable plunge lever on the saw unit • Retractable riving knife for cut-outs Ljdpfx Aney N Rihe Ujab • Operator control panel at eye level • Digital display on longitudinal fence • Digital display for horizontal cut • Strip cutting device • Lift roller transport system • Trimmable support table • TRK extraction unit • Dust tested • Only used for 2 months ----- Technical Data ----- Cutting length: 5,300 mm Cutting height: 2,200 mm Cutting depth: 60 mm Saw blade Ø: 250 mm Motor: 4 kW Extraction port Ø: 120 +100 mm Compressed air: 8 bar Year of manufacture: 2025 Quality info: - Complete basic inspection - Complete basic cleaning - Ready for immediate use

Condition: used, Year of construction: 2005, Used machine Year of manufacture: 2005 Condition: Guides slightly worn, only suitable for rough cutting Lajdpowqifkofx An Uob Equipment and technical data: - Cutting length: 4300 mm - Max. passage height: 2200 mm - Max. trimming height: 2100 mm - Max. scoring height vertical: 2100 mm - Cutting depth: 80 mm - Motor: 5.5 kW - Saw blade speed: 4500 rpm - Saw blade diameter: 300 mm - Extraction: 2 x 100 mm - Compressed air consumption: 60 NL/min Dimensions: 5620 x 1480 x 2990 mm Availability: short-term Storage location: Flörsheim

Condition: used, functionality: unexamined, machine/vehicle number: 1205, input voltage: 380 V, Used Holz-Her 1205 Vertical Panel Saw – Wall Saw – Panel Saw with Saw Blade Manufacturer: HolzHer Model: 1205 Cutting range: 445 cm width, 175 cm height Voltage: 380 volts. Lajdpexiwvljfx An Usb

Condition: used, Year of construction: 2007, Used machine Year of manufacture: 2007 Equipment and technical data Ljdpfx Aey Scl Tjn Ueab Cutting length: 5300 mm Cutting height: 2200 mm (edging height 2110 mm) Cutting depth: max. 60 mm Extraction system: - Saw unit: 120 mm - Frame end: 100 mm Workpiece support: - Stable plastic support for optimal stability, also suitable for narrow workpieces. - Chips are removed via diagonal slots. Roller transport system: Manual for easy and gentle material handling Indexing: Manual, vertical and horizontal Feed: Manual, vertical and horizontal Saw blade: Carbide (HM), 250 mm, hollow ground, 48 teeth Saw motor: 4 kW at 5450 rpm, 400 V, 50 Hz Folding rail: incl. workpiece support for narrow parts (5 positions) with strip stop with Supercut scoring unit Extraction system according to BG guidelines TRK (below 2 mg fine dust / m³ air) Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Fully automatic vertical machine, Cutting area 5,300 x 2,200 mm (cutting width x cutting height), Saw blade diameter 300 mm, Control for vertical and horizontal cuts, with ALU folding stops and ALU center support, with SUPER-CUT scoring unit Motor 3 kW - 400 V Laedpox Rr D Aefx An Ujb Availability: short-term Location: Röllbach

Condition: used, Storage location: Nattheim Lsdpfx Anjvvkrdj Usab

Condition: excellent (used), Panel Saw HOLZ-HER 1255 -used- Welded frame with extremely high rigidity, pneumatically retracting shifting grid, stable latching of the saw carriage at both top and bottom, latch monitoring in vertical cut electrically controlled, foldable plunge lever on the saw unit, retractable riving knife for cut-outs, operator panel at eye level, digital display on the longitudinal fence, digital display for horizontal cut, strip cutting device, roller lift transport system, trim-capable support surface, dust extraction device TRK, dust-tested. ----- Technical Data ----- Lajdpeyyzp Hsfx An Usb Cutting length: 5200 mm, Cutting height: 2200 mm, Trimming height: 2100 mm, Cutting depth: 60 mm, Minimum height on folding rail: 120 mm, Saw blade Ø: 250 mm, Motor: 4 kW, Extraction port Ø: 120/100 mm, Compressed air: 6 bar, Required space (LxWxH): 6500x1650x3050 mm, Weight: 900 kg Quality Information: - Fence strips replaced / refurbished - Comprehensive basic inspection - Complete basic cleaning - Electrical system checked - Immediately operational

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: 226/0-206, Max. cutting length 4,300 mm, Max. cutting height (vertical) 2,100 mm, Max. cutting height (horizontal) 2,010 mm, Max. cutting depth 60 mm Motor 4 kW Max. circular saw blade diameter = 250 mm, Extraction nozzle diameter = 120 + 100 mm Lodpfswgm Ihox An Ujab Max. installation dimensions 5,080 x 2,780 x 1,600 mm, Support rails have been replaced! --- Excluding transport and assembly of the machine --- Ex works in Seevetal, as seen, Subject to prior sale