Used Automatic Vertical Panel Saw for sale (39,923)

Condition: used, Year of construction: 1996, Panel sawElcon 185 RSXL Maximum cutting width 4150mm Maximum cutting height 1850mm Maximum cutting depth 80mm 3kW motor Bdy02V8A 4200 rpm Saw blade diameter 300mm Air pressure required 6 barMachine dimensions: 5550 * 1600 * 2730mm (L * W * H)

Year of construction: 2003, Condition: excellent (used), I sell the automatic vertical saw with scoring knives HOLZ-HER Supercut 1220 Automatic. Cutting range 5300x2100mm Motor 4,6kW. Cutting head tilting 0-90° Main saw blade 240-250mm / 2850rpm. With scoring knives unit. Automatic cutting. Condition very good. Cgfswv38 Available immediately.

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, Year of Manufacturing is 2018 however the machine has only been in operation between 2020 - 2023 Maximum Cutting Height - 2M (standard) Maximum Cutting Length - 4.2M Urvzflm8Vn Maximum Cutting thickness - 60mm Blade Width - 250mm No Scorer, however the machine has scraping head Additional Extras: Supporting block for cutting narrow boards Moving Fence - which will prevent the circular saw to cut the plastic slats when cutting along the with Additional Notes: Apart from pulley and plastic slats -this machine has not caused any issues, hence it is still very reliable.

Condition: used, Year of construction: 2019, Vertical panel saw Harwi Piranha 1550 Year 2019 Speed 2800 0mw./min 3kW Main Motor 400V Saw blade diameter 250mm Max cutting height 1550mm Max cutting width 3300mm Max cutting depth 55mm Overall dimensions 4200x2450x1200mm, weight 485kg Ujno3Vfu9J

Condition: good (used), Year of construction: 2004, Cut capacity 3300 x 2060 x 80mm 300mm max blade dia 3kw motor Overall floor area [ freestanding on legs ] 4451mm long x 2859mm high x 1598mm wide. Serial nr - 35111 Year - 2004 CE [ purchased refurbished 2021 ] Complete with Alko Mobil Jet 160H Dust Unit 160mm inlet dia 2.2kw motor Max flow rate 2,000m3/hr Dpm0Er Filter area 9.1m2 Year - 2021 CE

Condition: used, Year of construction: 1990, Functionality: fully functional, Machine/vehicle number: CPU11404, Cutting length (max.): 4,900 mm, Cutting height with scoring (max.): 2,300 mm, Saw blade diameter: 300 mm, Cutting height (max.): 2,300 mm, Cutting depth: 25 mm, Main saw diameter: 300 mm, Total length: 7,200 mm, Total width: 1,800 mm, Input frequency: 50 Hz, Input voltage: 230 V, Power: 4.4 kW (5.98 HP), Rotational speed (min.): 2,880 rpm, Space requirement length: 7,200 mm, Space requirement width: 1,700 mm, This machine has been used in a roof truss plant and a builders merchant environment. It is ready to operate and has been maintained to a good standard. It can be fitted to a dust extraction system. Dobidf

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 400 V Pluging: Three-phased Cnk9Kco8O3 Power: 4,4 Kw Overall dimensions Lenght: 6620 mm Width: 3035 mm Height: 1741 mm Weight: 1200 Kg

Year of construction: 2022, Condition: used, Main motor power: 11 kW Feedrate max: 130 m/min Continuously variable feed: Yes Feed-through line: Yes Stationary machines: Yes Panel storage system: automatic Beamsaw: Yes CNC machining centre: Nestingmaschine Automatic feeding: Yes Control: HOMAG POWER CONTROL Conformity marking: CE mark Ptjmivg7P2

Year of construction: 1995, Condition: used, Vertical band saw PEHAKA - Petzing & Hartmann Kassel type SLA 8 Machine No. 39150 Year of construction 1995 throat width 780 mm table size (working table) 1500 x 600 mm Hydraulic table movement 500 mm Table height 1080 mm throat in height max 475 mm Table load max 500 kg Roller diameter 800 mm saw band dimension 6300 x 32 x 1,2 mm band speed 1400 m/min motor power 5,5 kW mains connection 400 Volt, 50 Hz - working table with 13 T-slots for clamping Cbdzl3Edvr - hydraulic table movement 500 mm - infinitely variable feed speed via throttle valve 0-3000 mm/min. - 2x suction nozzles in the machine stand - hydraulic unit fixed at the bottom of the machine column - Operating instructions, electrical diagram, hydraulic diagram available space requirement L x W x H 2200 x 1500 x 2820 mm weight 2000 Kg very good condition

Condition: not inspected (used), Code: 0396 Brand: GMC Model: KGSA Manual vertical panel saw for cutting wood panels, plywood, chipboard, plastics, composite materials and various Technical data: Cutting length mm 5200 Cutting height mm 2150 Cutting thickness mm 50 Blade diameter mm 250 Motor power Hp 4 Pneumatic clamping of blade unit Compressed air 6 bar Suction mouth diameter mm 80 Overall dimensions of assembled machine mm 5200 x 850 x 3100 h Fzjgie8 Overall dimensions for transport: Frame mm 5200 x 2600 x 850 h - Beam mm 3100 x 700 x 800 h Weight kg 700 Machine in working condition - Not reconditioned MACHINE SEEN AND LIKED UNDER THE CONDITIONS IN WHICH IT IS FOUND

Condition: used, Cutting length 4300 mm Cutting height 2150 mm automatic , ELCON precision panel saw type D 215 ----- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length, individually Rkirx manually fold out -Scoring system: double cut of the main saw blade - Torsion-free, free-standing machine frame -Two folding stops for vertical saw cuts (above and below the middle support) ----- Special price "Partnership Edition" ex works in this version: on request! ----- plus pre-freight, freight, installation and instruction (if the machine does not have to be dismantled) Applies only within Germany. Unloading and cross transport to Installation location is determined by the customer. Price: EUR 1,900.00 plus statutory VAT ----- Options with extra charge: Cutting length 5,300mm instead of 4,300mm Order number: ELCO0075/O049 Surcharge: EUR 2,590.00 plus statutory VAT ----- Technical information according to the manufacturer - without guarantee!

Condition: used, Year of construction: 1981, used, good condition Make Holz-Her Type 1215 Year of manufacture 1981 MachineNo. 710 motor 4.0 kW cutting length approx. 5300 mm cutting height approx. 2100 mm cutting depth 80 mm saw blade diameter approx. 300 x 30 mm free-standing slatted frame moving away space requirement approx. 6550 mm x 1265 mm x 2895 mm weight approx. 1000 kg storage location 97447 Gerolzhofen, free loaded, unpacked handover in as-is condition as inspected without guarantee and warranty Bn2Spxezfh7

Condition: ready for operation (used), Technical characteristics Description : SELCO panel saw TYPE EBTR 120 Twin Pusher - 5600 x 2200 mm Numerical panel saw, with two independent automatic loading stations and electromechanical precision lifting table Dpn9Xl Principal technical characteristics Max cutting length : 5600 mm Max auxiliar pusher course : 4300 mm Max blade height from table level : 122 mm Max clamps opening : 110 mm Lifting table with direct loading : 5600 x 2200 mm Min panel dimension on loading position : 2440 x 1220 mm Min panel thickness from loading table : 10 mm Main blade motor 18,5 kW / 50Hz (25 Hp) Incisor blade motor 2,2 kW / 50 Hz (3 Hp) Brushless motor for blade chariot - Speed 1 -150 m/min Brushless motor for main pusher – Max speed 100 m/min 2 back rollers lateral alignment device with automatic positioning (60 mm to 2200 mm) Turning platform for automatic pre-cuts with 4 pile blocking device Auxiliar pusher TWIN PUSHER Main blade Ø 430 mm Incisor blade Ø 200 mm 4 pneumatical clamps with independent lifting in the transversal area for main pusher (placed at 70, 180, 390, 600 mm from the squaring line) 4 pneumatical clamps with independent lifting in the longitudinal area for main pusher (placed at 2235, 3845, 4650, 5450 mm from the squaring line) 4 pneumatical clamps with independent lifting in the auxiliar pusher (placed at 70, 180, 390, 600 mm from the squaring line) Air cushion rounded work plan 2050 x 850 mm for width optimization placement allowing simultaneous transversal cutting of several bands 4 air cushion tables 4 front transversal pre-aligning devices direct on the pile turning station 2 front and longitudinal pile aligning devices after the rotation Lifting loading table Auxiliar pusher for simultaneous different cutting phases, synchronized with main pusher The 2 pusher are managed by a software, which depending on the cutting instructions, selects the clamps of different pushers so that the insertion in the cutting zone is optimized to realize as many simultaneous cuts as possible The auxiliar pusher has 4 independent clamps and can be equipped with a fifth one (option). Automatic cut panels evacuation Heavy single structure, Industrial chassis, strong stability Cemented and calibrated chariot guiding rails, which supports the main blade and the incisor blade Les 2 pousseurs sont gérés par un logiciel qui, en fonction du schéma de découpe et des phases d'usinage nécessaires, sélectionne les pinces des divers pousseurs à Insérer dans la zone d'usinage afin de réaliser le plus grand nombre possible de cycles de découpe simultanés. Expulsion automatique des panneaux coupés Pressor group Lateral alignment group with 2 independent rollers The turning station has a lifting platform turning the panel pile at 90° which is held in place with blocking devices. The pile is then aligned by the front devices When the pre-cutting cycle is over the main part of the pile is returned again at 90° on the turning station, and the pre-cut part is sent to the transversal cutting operation PC Windows XP, 17" screen With cutting profiles, lists, manual cutting, simulation, diagnostic, online help, maintenance, statistics and settings Software and applicancies: "OPTIPLANNING" Pro Version software : Great number of cutting lists (including different types of material) allowing “all at once” optimization "IMPORT FILE" function Editing on external device and import files on machine PC. Automatic management of panel piles and waste material Panel stock and

Condition: used, Year of manufacture: 2024, cutting length: 3200 mm, saw blade projection 68 mm, scoring unit with pneumatic lowering, angled table on the left, fence fence with 2000 mm length, movable machine tables, 2 side tables, switching point on the air cushion table, lateral pressure device, motor-controlled grooving function, thermal label printer Hu3Pvqk

Condition: used, Year of construction: 2018, Functionality: fully functional, The used 2018 Format 4 Kappa Automatic Classic Beam Saw, currently located in The Netherlands. Crafted for excellence, this beam saw boasts a cutting length that flexibly spans 3200/4300 mm, complemented by a substantial 320 mm saw blade diameter, cutting through wood with unmatched precision. Equipped with a powerful 7.5 kW motor, it ensures robust performance across various applications. Technical specifications: Cutting length: 3200/4300 mm Saw blade diameter: 320 mm Saw blade projection: 68 mm Scoring saw blade: 150 mm Variable feed speed adjustment: 1 - 40 m/min Motor power: 7.5 kW Electrics: 3x 400 V, 50 Hz Weight: 3900 kg Ule92Pzjtr ____ *Information may be inaccurate and subject to change without notice. This description could have been automatically translated, and details in this classified ad are indicative and subject to change. GLOMACHT advises verifying specifications or else.

Condition: used, Vertical wall saw Striebig&nbsp Econom II 6220 E Saw blade max/min 300/290mm Maximum cutting width 5300mm Maximum cutting height horizontal 2100mm Maximum cutting height vertical 2200mm Maximum cutting depth 80mm 380V 9A2Icbn Horizontal and vertical cutting Overall dimensions 6500 x 1400 x 2750 mm (L x W x H),&nbsp 800 kg

Condition: used, Year of construction: 1985, used, good condition make Striebig type 6220 A year of manufacture approx. 1985 motor 4.4 kW cutting length approx. 5300 mm cutting height approx. 2100 / 2200 mm center support cutting depth 80 cm saw blade diameter approx. 303 mm wall mounting slatted frame moving away support rails wood Dpkg7N suction connection D 120 mm space requirement approx. 6300 mm x 1250 mm x 2720 mm Weight approx. 1200 kg Total connected load approx. 4.4 kW Storage location 97447 Gerolzhofen, free loaded, unpacked Handover as seen without guarantee and warranty

Condition: ready for operation (used), Technical characteristics Semi-automatic sawing process Maximum main blade diameter: 300 mm Blade rotation speed: 4750 RPM 5.5 kW motor Scorer (VSA) Dpn9Wn Maximum cutting capacity : Cutting length: 5300 mm Vertical cutting height: 2200 mm Horizontal cutting height: 2100 mm Cutting depth: 80 mm Digital stop Suction connection diameter: 160 mm Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7,5 Kw Motor: 7,5 CV Overall dimensions Lenght: 6765 mm Width: 1813 mm Height: 3015 mm Weight: 990 Kg

Condition: used, Year of construction: 2006, Vertical panel saw Harwi Piranha 1550 Speed 2800 0mw./min 3kW Main Motor 400V Saw blade diameter 250mm Bjwn7Rq2Tun Max cutting height 1550mm Max cutting width 3300mm Max cutting depth 55mm Overall dimensions 4200x2450x1200mm, weight 485kg

Condition: used, Year of construction: 1983, used Make Holz-Her Type 1215 Year of construction 1983 MachineNo. 1222 cutting depth 80 mm motor 4 kW cutting length approx. 5300 mm cutting height approx. 2000 mm saw blade diameter approx. 300 mm Bnjy8Sqrdms free-standing slatted frame moving away suction connection D approx. 100 mm space requirement approx. 6300 mm x 1100 mm x 2700 mm Weight approx. 1000 kg Total connected load approx. 3 kW Storage location 97447 Gerolzhofen, free loaded, unpacked Handover in as-is condition as inspected without guarantee and warranty

Condition: used, Vertical wall saw Holz-Her 1215 Max cutting height 2200mm Max cutting width 5300mm Max cutting depth 70/80mm Saw blade 300mm 380V 3kW Motor Horizontal and vertical cutting Cjcditen9Z 6800x1000x2850mm, weight 800kg

Condition: new, Partnership Edition 2022 Technical description: Cutting height: vertical: 0-2,150 mm, horizontal: 80-2,000 mm Cutting length: 5.300 mm Depth of cut: 80 mm (with clamps: 55mm) Saw blade: diameter 303 mm, bore 30 mm, Z=60 hollow roof tooth Saw blade rotation: 5.000 rpm. Required air pressure: 6 bar Dimension reading for horizontal saw cuts: - via scale from 0 - 2.070 mm - via strip cutting stop from 75 - 500 mm Dimensional reading for vertical saw cuts: - via scale from 0 - 1.300 mm Tcihxxfv Suction ports: 1 x 100 mm 1 x 120 mm Equipment features: - ADVANCE clamping system consisting of: 2 pneumatic clamping tongs moving on vertical axes motorized on a ball screw from top to bottom. The tongs carry plates with a weight of max. 150 kg. - torsion-free, free-standing machine frame - round bar guide, vertical and horizontal - pneumatic deflecting slatted frame - fine adjustable folding fence with fence extension - fine adjustment for horizontal saw cuts via hand wheel - strip cutting fence - manual programming rail with 5 grooves - pneumatic plunging of the saw unit - 25 material support rollers - 1 up and 1 down roller - pneumatic workpiece clamping device between the support rollers - 3 center support elements, pneumatic folding - pneumatic saw head blocking - control panel with template holder - switch unit on the saw unit: start button, stop button - tool cabinet - illumination scale for vertical saw cuts Partnership Editon equipment: - digital display for the folding fence - digital display for the saw unit with incremental function - pneumatic tilting saw unit - scoring system with controlled counter air nozzle, numerical display for scoring resp. and activation light - 5,5 kW motor incl. star delta start switch - cutting line laser order number: ELCO0223

Condition: used, Year of construction: 2005, Vertical wall saw Harwi Piranha 1850 Max cutting height 1850mm Max cutting width 4300mm Cukdmsmhk Max cutting depth 55mm Main motor 3kW Saw blade 250mm Year of construction 2004 380V Horizontal and vertical cutting Dimensions: Weight 570kg

Condition: used, Year of construction: 2006, Vertical wall saw Elcon 185 DSL Max cutting height 1850mm Max cutting width 4300mm Max cutting depth 80mm Year of construction 2006 Saw blade 300mm 7Lj2H09Lpx 380V 8 Amp 3kW Engine Pneumatic clamp Saw horizontally and vertically Transport dimensions 5300x1300x2665mm, weight 1000kg

Condition: used, Year of construction: 2012, Vertical wall saw Elcon 215 D Max cutting height vertical 2150mm Max cutting height horizontal 2105mm Max cutting width 4300mm Cutting depth 60mm Chkdocwwh8 Year of construction 2016 Saw blade 250mm 380V 10 Amp 4kW Motor Horizontal and vertical cutting Transport dimensions: 5720x1100x2865mm, weight 875kg