Used mounting technology for sale (165)

Year of construction: 2014, operating hours: 3,100 h, condition: excellent (used), functionality: limited functionality, MYDATA MY500JP Jet Printer 2014 in excellent condition with exceptionally low operating hours (approximately 3,100). Kept and used in a clean environment. Complete system supplied with offline programming PC, MYCAM JP software, 2D Inspection & Repair option, SMT Adhesive option, manual load tables and associated documentation. There are also some spares included which we can bundle into a sale deal for an appropriate price. Visits/Inspection are welcome by appointment. An excellent opportunity to acquire a MY500JP suitable for high-mix, low-to-medium volume SMT production. The machine exhibits an intermittent issue affecting movement on the X-axis during camera positioning. On occasion, a slight jitter or vibration is observed, which can prevent the vision system from reliably locating the PCB fiducial during initial board loading or machine initialisation. The fault is intermittent and does not occur consistently. Most of the time, reloading the PCB allows operation to continue normally. Occasionally, a machine restart is required. The root cause has not been determined, but the issue appears to be associated with the X-axis motion control system. Potential areas for investigation include the servo amplifier (drive), encoder, encoder cable or other associated motion control components. Despite this intermittent behaviour, the machine was used in active production of complex PCB assemblies, including fine-pitch BGA boards, for approximately 12 months prior to being replaced as part of an equipment upgrade. The machine is therefore offered for sale on the understanding that diagnosis and repair of this intermittent fault is outstanding. Included: MYDATA MY500JP (2014) Approx. 3,100 operating hours MYCAM JP offline programming PC and software 2D Inspection and Repair option SMT Adhesive option Manual loading Technical documentation 4pcs AE04 ejectors Bundle of spare parts Not included: Solder paste Cassette (Holding Assembly), Solder paste, Purge Gel, Filter boxes Conveyors Gbsdpfjzlx E Tex Aciot

Year of construction: 2008, condition: defective spare-parts repository (used), functionality: unexamined, power: 5 kW (6.80 HP), number of previous owners: 1, noise level: 69 dB, machine/vehicle number: 070523, Current operating hours of the tube: unknown Maximum PCB width: 450 mm x 400 mm Inline X-ray imaging + AOI History from the previous owner is available We acquired the machine as "functional," but it was likely used as a source of spare parts by the previous owner. Therefore, it cannot be guaranteed that all components are present. We have never put the machine into operation and cannot provide any information about its condition during operation. You are welcome to inspect the machine in 72108 Rottenburg and form your own opinion. Gbedpszhwvpjfx Aciet Since we are selling the machine as defective/in need of repair, the goods are sold with the exclusion of any warranty and any liability for defects.

Condition: not inspected (used), Year of construction: 2000, functionality: unexamined, overall weight: 3,500 kg, Siemens SIPLACE HS50 – Spare Parts Machine / Untested Technical Data Manufacturer: Siemens SIPLACE Model: HS50 Gsdpfxszyu N Ds Acijbt Heads included Condition: Used, untested Functionality unknown Sold as a source of spare parts Several systems available We do not test or commission the system. It is sold in its current as-is condition, with unknown functionality. Inspection is possible by appointment. Packing and worldwide shipping are available as options.

Year of construction: 2017, condition: excellent (used), functionality: fully functional, STANDARD FEATURES - REJECT CONVEYOR • Reject, inspect, and by-pass modes selectable. • Conveyor width adjustment using a hand crank. • Controlled by a PLC. • CE certified. OPTIONS • Non-standard conveyor/segment lengths • Electrical conveyor width adjustment. • Automatic conveyor width adjustment • Additional lift positions for extra buffer capacity • Inspection interval counter • Light fixture • Alarm buzzer. • Other options available upon request SPECIFICATION Gbodszy N Rpspfx Aciot Transfer height 950 mm ± 25 mm* Colour RAL 9002* Flow direction Left to right* Fixed rail Front* Machine interface SMEMA* Conveyor concept ESD belt Belt speed Variable 2-14 m/min. PCB edge support 3 mm Component clearance Bottom 30 mm, top + bottom = 65 mm max. (belt to belt) Power supply 230 VAC/50 Hz/1 Ph Power consumption 150 VA max. Air supply 4-6 bar Air consumption 10 ltr/min max. Machine L x W x H (mm) 1000 x 875 x 980 Weight (Kg) 95 PCB Length (mm) 80 - 460* PCB Width (mm) 50 - 460* Fixed rail to front (A) (mm) 186

Year of construction: 2023, operating hours: 5,027 h, condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, We are offering this very well-maintained Halter CNC Automation Millstacker Premium 25 handling robot for CNC milling machines, year of manufacture 2023, with very low operating hours. Custom modifications deviating from the standard model that were carried out for us: Gbodsy Nmmiopfx Acijt 1. An individual deposit position (in our case, onto a chute into a water bath) was added as an option. This setup also allows all 12 stacking positions to be loaded with raw parts—whereas when depositing onto the table, only 11 stacking positions can be loaded with raw parts. 2. Customized adjustment of the angular alignment in the magazine. As a result, longer/larger parts can also be placed lengthwise between the bars when diagonal placement is no longer possible. 3. An additional set of longer support bars was manufactured to securely position larger parts. If you have any questions or require more information, please feel free to send us a message or call us.

Year of construction: 2018, condition: excellent (used), functionality: fully functional, machine/vehicle number: 125102018, Manufacturer: TMA Automation sp. z o.o., Year of production: 2018 SET DESCRIPTION For sale is a complete set of two cooperating Cartesian robots manufactured by the Polish company TMA Automation, designed for use with injection molding machines. The set consists of a MIDI LINE linear robot and a UNI LINE in-mold labeling (IML) module. The robots were used in a production facility and are in a condition confirmed by technical documentation. The sale includes complete documentation. TECHNICAL DATA MIDI LINE robot (serial number: 125102018) Dimensions (L x W x H) 2400 x 2060 x 1435 mm (variable height), Weight 600 kg, Payload 8 kg, Z-axis reach 2300 mm, Y-axis reach 1400 mm, X-axis reach 1400 mm, Supply voltage 400 V / 50 Hz, Power 4.5 kW, Operating air pressure 6.5 bar UNI LINE robot with IML module (serial number: 126102018) Dimensions (L x W x H) 2540 x 1000 (1370) x 2090 mm, Weight 550 kg, Payload 8 kg, Stacker reach 1100 mm, Supply voltage 400 V / 50 Hz, Power 1.5 kW, Operating air pressure 6.5 bar EQUIPMENT INCLUDED Touchscreen control panel with a safety STOP button (e-stop), control software with the following functions: automatic mode, manual mode, no-label mode, no-part removal mode, program archive, graph and alarm module; complete technical documentation, CE marking on both machines. TECHNICAL CONDITION Robots from 2018, operated in industrial conditions (plastics injection molding). Control panel active; at the time of the photographs, program PRG 2 was selected, operating speeds: manual 22%, automatic 17%. The photographs show a red robot stop signal (standby condition, not an emergency). Recommended before purchase: personal inspection and test run at the installation site. SALES CONDITIONS Sold only as a set. Self-collection only. Transportation is the buyer's responsibility. Gbedpfx Ajzwdx Njcist

Year of construction: 2011, condition: excellent (used), We are offering for sale our Viscom AOI S3088 - III in very good condition. - Manufacturer: Viscom SE, Hanover - Type: S3088-III - Inventory No.: ZZ052495 - Year of manufacture: 03/2011 Gsdpszv S Dwjfx Aciebt - Serial number: 101159 - Camera configuration: 8M (4x orthogonal, 4x angled) - Software version: 9.40 (4) - Licenses: OCR and DMC - Last calibration: May 2025 - Operating system: Windows 7 Professional (Service Pack 1) - Processor: Intel Core i7-3770 CPU / 3.40 GHz - RAM: 16 GB - UPS functional The system has been inspected by our technician and found to be in very good condition. We will gladly provide you with a demonstration video of the system, or we look forward to your visit.

Condition: used, Year of construction: 2014, Working condition machines. Comes with a small patch of feeders. Gjdezzmplopfx Acisbt

Year of construction: 2014, condition: good (used), We are selling our Asys Insignum 1000 Scan. Asys Insignum 1000 Scan Serial No. 052939 Gjdpfozxgx Isx Aciobt Year of manufacture: 2014 Shipping is possible.

Year of construction: 2017, condition: used, Maximum placement speed: 16,000 components/hour IPC net placement speed: 13,800 components/hour Placement system: HYDRA Tools: 8 Max. component dimensions (X/Y/Z): 56 / 56 / 15 mm Max. component weight: 140 g Min. PCB size (X/Y): 70 / 50 mm Max. PCB size with T3 (X/Y): 443 / 508 mm Min./max. PCB thickness: 0.4 / 6 mm Max. PCB weight with T3: 5 kg Feeder capacity with T3: 112 × 8 mm feeder positions Conveyor height range: 880–975 mm Operating hours: approx. 7000 h Placement time: approx. 3000 Gbedpfxszzlq Ue Acijt

Year of construction: 2014, condition: excellent (used), For sale: our Asys Insignum 1000 Scan Asys Insignum 1000 Scan Serial number: 052441 Godpfxozxgu Ae Acisbt Year of manufacture: 2014 In very good condition. Shipping possible.

Year of construction: 2007, condition: used, X2 machine (Revolver head 12 + dubble twin heads) 2007/2008 year of many factory incl 4 tables. This machine has to be dismounthed to get out of the factory (Input and out conveyer, some has to do it) and there is also feeders incl in the package as follows hear under. Here it is a line computer with program incl. in the price. Feeder 00141088-01 – 26 stk ( 3 tape ) Feeder 00141092-04 – 13 stk Feeder 00141092-05 – 4 stk Feeder 00141094-03 – 1stk Gjdpfezzc A Ujx Acijbt

Year of construction: 2011, condition: good (used), For sale: our Asys LSB 03 (destacker) PCB loader Serial number: 036469 Year of manufacture: 2011 Good condition Gbodpfozxq Exsx Acijt Shipping possible. Inspection possible.

Year of construction: 2014, operating hours: 4,000 h, condition: used, Operational machine with low hours! Gedpfx Acoy R Dc Dsijbt Ask for additional information!

Condition: used, functionality: fully functional, For sale is a Versaflow 3/45 selective soldering machine manufactured by ERSA. Serial number: S011B-15G0525 Gbsdpfx Acezzldboiot Dimensions: 5.70 x 1.69 x 1.66 Weight: 2300 kg Note: Width adjustment is not possible (the transport width has been fixed to the frame width). Price upon request.

Year of construction: 2006, condition: good (used), For sale is our Teradyne Spectrum 9. Type: TSE 8862 Year of manufacture: 2006 Condition: fully functional (without monitor and keyboard) Equipment: 1 FIB/DeltaScan board 1 VP board Gbodpfxjzh Txto Aciet 1 VP Expander board 1 VXI-MXI-2 1 High voltage PRISM board 10 CC2a master and expander boards Maintenance documentation and CE declaration available.

Year of construction: 2012, condition: good (used), Technical specifications PCB buffer system Manufacturer: ASYS Model: PS 08 Year of manufacture: 2012 Buffer capacity: 8 PCBs Automatic width adjustment Individually driven conveyor belts SMEMA interface Godpfx Ajzxiwmociebt Condition: Used, functional

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Label dispensing module for print integration, print module 4L300 thermal transfer printer, belt conveyor, see photos for details. Gbodpfozn N Nnex Aciot

Year of construction: 2012, condition: used, A Atf selective soldering system in need of repair is offered. Process area: 350x250mm, extraction capacity: 200m³/h, power/capacity: 400V 50/60Hz. Machine dimensions X/Y/Z: approx. 1560mm/1375mm/1060mm, weight: approx. 380kg without solder. With spray fluxer, temperature sensor and nitrogen equipment. The Z-axis loses its reference position after repeated operation. Inspection by appointment is possible. Gsdpfx Acozwpgleisbt

Year of construction: 2019, condition: used, LAS coating system, Erlaser Clad, year of manufacture 2019. Gjdpozvwc Ssfx Aciobt

Year of construction: 2017, operating hours: 157 h, condition: used, functionality: fully functional, machine/vehicle number: 0000014/21, Essemtec pick-and-place machine paraquda.g2 with dual head Accessories: 8x 8mm double high-speed feeder; 10x 12mm high-speed feeder; 6x 16mm high-speed feeder 3x 16/24mm high-speed feeder; 2x 32/44mm high-speed feeder; 3x 8mm 10-lane feeder Gbodpjw U Dpqjfx Acijt 1x 8/12mm 8-lane feeder

Condition: used, functionality: fully functional, Year of construction: 2017, Operational condition 3D AOI machine. Gbsdpfx Ajw Ty Hcjcijt Ask for specification!

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: AAY366, overall weight: 900 kg, Equipment: type plate available, We are selling our EROWA as it is now surplus to requirements. It was previously connected to our DMG65H and functioned perfectly. The robot has been updated to the latest version of the software. Clamping devices can be included by agreement. The machine is currently in storage and has been disconnected by an Erowa technician. All manuals and documentation are available. Interface specification is available. Gbodpfxoxuh Ddo Acijt

Condition: good (used), Year of construction: 2007, functionality: fully functional, Maximum transport width: 460 mm Maximum travel distance: 636 mm Godpfjzwcr Usx Acisbt

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 700168, type of input current: AC, Automatic stencil printer Gedpfx Asyidw Ujcijbt Speedprint Technology Model: SP700 AVI Used, fully functional