Used Sac Fs 305 for sale (35)

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut Bledpjx Nrvvjfx Afnoc - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site - immediately available - Subject to prior sale

Condition: ready for operation (used), Year of construction: 1984, SAC Surface Planer FS 430 Table length mm 2900 Infeed table mm 1550 Outfeed table mm 1310 Table width mm 430 Table height mm 800 Cutterhead diameter mm 120 Bljdpex S Ivksfx Afnec Cutterhead speed rpm 5000 Number of straight knives 4 Straight knives mm 430 × 35 × 3 Rabbeting depth mm 20 Planer fence mm 1005 × 180 Fence tilt 0-45 Motor power HP 4 Required space mm 2900 × 700 × 960 Weight kg 475 Condition: function tested

Condition: used, Year of construction: 1992, working width: 530 mm cutter head: Leitz - Centrofix number of blades: 4 surface table length: 2900 mm Bledpfjug Tytex Afnec adjustment table: Hebel read out out table height: Scala surface fence tiltable: ja motor power: 4 kW machine length: 2900 mm machine width: 1000mm weight: 800 kg

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, planing width: 430 mm, total length: 3,970 mm, total height: 1,350 mm, total width: 950 mm, overall weight: 650 kg, extraction nozzle diameter: 1 mm, planer shaft diameter: 120 mm, working width: 430 mm, number of planer blades: 4, rotational speed (min.): 5,000 rpm, type of input current: three-phase, extraction connection diameter: 120 mm, Planer, jointer SAC FS 430.S Specification: • Condition: used, fully serviced • Manufacturer: SAC • Model: FS 430.S • Working width: 430 mm • Table length: 3960 mm • Infeed table length: 2500 mm • Adjustable tilting fence, dimensions 1800x160 mm • Motor power: 3.0 kW • Spindle speed: 5000 rpm • Chip thickness indicator • Max cutting depth: 8 mm • Electrically adjustable planing height from control panel • Electronic chip thickness indicator • Anti-noise combs on the shaft • Motor brake • Safety guard over the shaft • 4-knife shaft, 120 mm diameter, Tersa knife system • Star-delta starting • Sawdust extraction outlet: 120 mm diameter • Year of manufacture: 1993 • Weight: 650 kg • Overall dimensions: 396 x 95 x 135 cm (L x W x H) Additional information: • Very good technical condition Bledpfx Asxtd Ngsfnsc • Posted photos show actual condition of the item for sale • Test run and inspection on site possible.

Condition: excellent (used), Year of construction: 1990, Spindle moulder TS110 Year of manufacture 1990 380 Volts, 7.5 HP Fence with fine adjustment 4 speeds: 3,000, 4,500, 8,000 and 10,000 rpm Left/right rotation, brake Haffner 3-roller power feeder with 4 speeds, Power feed rollers new Bodpfsv Im Swex Afnslc

Condition: good (used), Code: 0288 Brand: SAC Model: F 12 Automatic working center for door and wooden window frames Technical data: Tenoning side : End cutting circular saw - Blade diameter mm 400 Motor power Hp 4 Horizontal positioning with indexing stops Bledoyg Iq Nepfx Afnsc N° 2 tenoning spindles each lenght mm 320 Max tools diameter mm 320 Spindle diameter mm 50 Motors power each Hp 10 Max thickness of pieces mm 100 N° 2 suction inlets mm 130 Automatic table with guideline Profiling side: N° 4 profiling spindles each lenght mm 270 - Spindle diameter mm 50 Motors power each Hp 10 N° 4 suction inlets mm 130 Glass bead recovery device - Motor power Hp 3 - Blade diameter mm 200 Exhaust outlet diameter mm 60 Glass bead recovery device - Motor Hp 3 Exhaust outlet diameter mm 100 Adjustable feed speed Return roller conveyor Overall dimensions - tenoning machine : mm 2900 x 2400 x 2200 h Overall dimensions - profiling machine : mm 2900 x 1400 x 1800 h Total weight kg 2900

Condition: excellent (used), Year of construction: 1998, For sale is this SAC bandsaw. It operates flawlessly and can be inspected and tested on site. Machine details: Year of manufacture: 1998, wheel diameter: 600 mm, cutting height: 435 mm, cutting width: 580 mm, motor: 1.5 kW. Accessories: spare blades, 2 stops. Bjdpoyc Ntdofx Afnolc

Condition: used, Year of construction: 1997, Belt width: 150 mm Belt length: Table size: Veneer sanding unit: yes Oscillation: yes Tilting table: yes, 0°÷ 45° Bjdpfxeyffxzs Afnolc Extraction connection: 120 mm Motor power: 3 kW Machine length: 1440 mm Machine width: 800 mm Weight: 530 kg

Condition: excellent (used), Top and bottom sander SAC 4R-300 Working width: 300 mm Working height: 2.5–150 mm 4 sanding units 2x bottom unit 2×5.5 kW 2x top unit 2×5.5 kW Top and bottom cleaning brush 2×0.55 kW Feed speed adjustable via frequency inverter: 4–16 m/min Electric sanding height adjustment Can be integrated into a line with other machines Bodpjygrb Sofx Afnslc CE certificate

Condition: excellent (used), Working length 300 cm, pneumatic clamp, motor 1.65 kW Bledpfx Afjygxgbjnec

Condition: used, Thickness planer SAC RS/530 - used - Segmented pressure beam, electric height adjustment, under-table roller, separate feed motor ----- Technical Data ----- Bledjw I T N Hopfx Afnsc Planing width: 530 mm, Number of knives: 4 units, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Extraction port Ø: 140 mm, Motor: 4 kW, Weight: 840 kg

Condition: used, Year of construction: 2005, total width: 1,250 mm, total height: 1,250 mm, total length: 1,050 mm, Weight: 820 kg Bljdpfownhyzsx Afnjc - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: AF 1.04487 - Main motor power [kW]: 4.0 - Max. planing width [mm]: 520 - Planing shaft speed [rpm]: 5000 - Planer block diameter [mm]: 120 - Number of cutters [pcs.]: 2 - Transport dimensions: 1050mm x 1250mm x 1250mm (l x w x h) - Transport weight [kg]: 820kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Milling machine for wood Make SAC type ts 80 4 milling spindles : Speed : 2900 - 4000- 5800 - 8000 n1/min Milling cutter stroke 150 mm Table 1000 x 800 mm 3 roller feed unit make ELU infinitely variable speed Motor 380 Volt 2800 n1/min. 11,3 Ampere 5,5 kw Transport dimension : Bjdetyv Aaopfx Afnslc L.1020 mm W. 800 mm H.1650 mm, with pallet Weight 470 kg

Condition: excellent (used), Technical data: Working width: 960 MM 1 Combination unit Shaft diameter: 160 MM Height of processed material: 160 MM Grinding belt dimensions: 990x1800 mm Extraction spigot(s) diameter: 140 mm Electric lifting Digital display Bledpfot Iv Azox Afnjc Safety switch Main motor power: 11 kW Voltage: 380V Overall dimensions: Length: 1550 mm Width: 1680 mm Height: 2200 mm

Condition: good (used), SAC spindle moulder with sliding carriage and power feed 3-roller Holzher power feed Side carriage adjustable up and down for the cutter, can also be used as a table extension Table with pull-out extension Spindle lock Adjustable fence with Aigner guides 5 spindle speeds (3000, 4500, 6000, 8000 and 10,000) Spindle diameter 40 mm 7.5 kW motor with brake CE mark Bedpfx Asx Sw Szefnelc Technical documentation included Machine tested, fully functional, ready for work

Condition: excellent (used), Calibration and fine sanding machine with 1 sanding unit 1 motor, processing from above Working width 1000 mm Sanding belt dimensions 2200 x 1030 mm Workpiece dimensions 3 - 170 mm Table height adjustment motor 0.18 kW, 400 V, 50 Hz Main motor 7.5 kW, 400 V, 50 Hz 2 feed speeds 5.5 & 11 m/min 1st unit: Combination unit, sanding drum, rubberized, 90 Sh / pneumatic sanding pad Sanding pad NEW 2nd unit: Bodpfx Afeudxchenjlc Cleaning brush Compressed air requirement approx. 6 bar Suction diameter 200 mm Dimensions approx. L x W x H = 1385 x 1980 x 1900 mm Weight approx. 1800 kg Automatic workpiece thickness adjustment with digital display Oscillation of the sanding belt Sanding belt emergency stop with disk brakes Table extension with 3 rollers in the outfeed Emergency stop button Main switch TRANSPORT CARPET LIKE NEW - was replaced by us approx. 3 years ago MORE THAN 30 WIDE BELT SANDERS Note used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: good (used), Year of construction: 1979, Spindle diameter: 30 mm Speeds: 2,800 – 4,500 – 6,500 – 10,000 rpm Motor: 10 HP Table dimensions: 1,100 x 1,000 mm Bodpsxran Nsfx Afnolc Extraction port diameter: 2 x 120 mm Tilting range: -5 to +45 degrees Max. spindle stroke: 130 mm Various tools available at an additional cost Includes 4-roller feed unit HOLZHER Type 1112 Each with 4 feed speeds forward and reverse Custom-built table extension right & left With tools as shown in the picture

Condition: used, Year of construction: 2001, functionality: fully functional, machine/vehicle number: AA0985, input voltage: 400 V, SECOND-HAND TOP AND BOTTOM WIDE BELT SANDER SAC MOD. 4R 300 - CE RULES - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each - Volt 400/50 - S/N AA0985 Bodpjx Riccsfx Afnolc - Year 2001

Condition: used, Year of construction: 1993, ANGULAR PROFILING MACHINING CENTER Brand: SAC Model: P4 Serial number: 9304 Bledpfx Asrx Tcgsfnoc Year: 1993 Model: F5 Serial number: 93030 Year: 1993 Machines visible in our workshops CHARACTERISTICS : - Cutter rotation speed: 6000 rpm

Condition: excellent (used), functionality: fully functional, SAC F4 window making tenoning machine Technical condition: good, the machine is in working order. The price of the machine includes a large set of spare parts. Technical data: Min. workpiece height: 30 mm Max workpiece height: 90 mm (105-130 mm) Min. workpiece width: 30 mm Max. workpiece width: 600 mm Min. workpiece length: 200 mm (measured inside the pivots) Max. workpiece length: 3000 mm Max. tenoning depth: 130 mm Max. trimming width: 1000 mm Wave length (Wellenlänge): 320 mm Shaft diameter: 50 mm Vertical stroke: 290 mm Zero tool diameter: 300-350 mm Stumpfstoßsäge (keel saw) Horizontal stroke: 130 mm Positioning with continuous axis Tool diameter: 400 mm RPM: 3000 rpm Motor power: 3.2 kW Zapfenschneidwelle (journal cutting shaft) Motor power: 5.5 kW (7.5 or 9.25 kW) RPM: 3500 rpm Profilschneiden (profile cutting) Min. workpiece height without guide on the left side: 20 mm Max. workpiece height: 140 mm Min. workpiece width: 45 mm Min. workpiece length: 200 mm (measured inside the pivots) Wave length (Wellenlänge): 320 mm Shaft diameter: 50 mm Horizontal movement: 60 mm Vertical movement: 290 mm Blsderzvkcopfx Afnec Tool diameter in zero position: 110-140 mm Maximum tool diameter: 240 mm First profile cutting shaft: Motor power: 5.5 kW (7.5 or 9.25 kW) Speed (clockwise and counterclockwise): 6000 rpm Second shaft for profile cutting: Motor power: 5.5 kW (7.5 or 9.25 kW) RPM: 6000 rpm Tenon cutting carriage: Work surface dimensions: 750x900 mm Motor power: 1.1 kW Working speed: 3-10 m/min Positioning speed: 45 m/min Number of splinter guard positions: 4-8 Scale positioning with continuous axis up to 3000 mm Angular guide ± 60° Saw for glass weld unit: Motor power: 2.2 kW Saw diameter: 200 mm RPM: 6000 rpm Profile milling feeding device: Motor power: 0.75 kW Feed speed (from ... to ...): 4-20 m/min Number of rollers: 16 Diameter of rollers: 145 mm Groove cutter for metal fittings (on request) Motor power: 3.3 kW (5.5 kW) Maximum tool diameter: 190 mm Spindle diameter: 30 mm RPM: 6000 rpm Horizontal movement: 70 mm Vertical movement: 40 mm Hydraulic power: 0.25 kW Weight: 4300 kg

Condition: ready for operation (used), Year of construction: 1985, Thickness planer SAC RS/530 electric height adjustment under-table roller separate feed motor Planing width: 530 mm, Number of knives: 4 pcs, Passage height: 240 mm, Feed speed: 7 / 14 m/min, Extraction port Ø: 140 mm, Bledpfjx Dylrjx Afnoc Motor: 4 kW, Weight: 840 kg Price: 3200.- Year of manufacture: 1985

Condition: not inspected (used), Year of construction: 1984, Connected load 380V 9A Motor power 4kW Cutting height 460 mm Cutting width 770 mm Extraction 120 mm Blodpfxevt Ttlj Afnec Height of the machine approx. 2500 mm Panhans band saw guide above and below Saw blade length 5700 mm

Condition: used, Year of construction: 1980, Spindle swivels: No Sliding carriage: Yes Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual Height indication: Scala Swivel angle display: - Milling stop display: Scala Milling spindle diameter: 40 mm Speeds: 3000, 4500, 6000, 9000 motor power: 5 kW Motor brake: Yes automatic Suction connection: 2 x 120mm Machine length: 1200mm Machine depth: 900mm Bjdpfek Eakcox Afnslc Weight: 600kg

Condition: used, Year of construction: 1999, spindle tilting: yes -5 bis 45° height adjustment: electric tilting adjustment: electric fence adjustment: manual altitude display: digital swivel angel display: digital Bjdpoiixxcjfx Afnslc tilting fence display: Scala spindle diameter: 30 mm speed: 1500, 2250, 3000, 4000, 5000, 3000, 4500, 6000, 8000, 10000 power consuption: 7,5 kW motor brake: yes, automatic suction connection: 2 x 120mm machine length: 2400mm maschine width: 1400mm weight: 1100kg

Condition: excellent (used), functionality: fully functional, SURFACE PLANER machines . different models second hand machines Bedpfxowt T Hdo Afnjlc n.4 knives volt. 380/50