Automation

EROWA ERS

Condition: excellent (used), Year of construction: 2015, travel distance X-axis: 850 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, total length: 8,000 mm, total width: 3,325 mm, table width: 500 mm, table length: 600 mm, table load: 500 kg, overall weight: 12,000 kg, spindle motor power: 11,000 W, 5-axis CNC machine (VMC) MAZAK - VARIAXIS J600-5X MACH-ID 9484 Make: MAZAK Type: VARIAXIS J600-5X Control: MAZATROL matrix 2 Year: 2015 5 Axis Manufacturing cell with automation LANG 20 positions Renishaw 3D Taster with pre-setter ball LANG Preperation system with  vacuum 25 Units LANG pallet with vice / clamp / chucks Only 7155 Working hours ! New EUR 500.000 Lsdpfjyyybhjx An Uoab X - Travel: 850mm Y - Travel: 550mm Z - Travel: 510mm A - Axis: -120 to +30° B - Axis: - 120 to +30° Table Length: 600mm Table Width: 500mm Table load: 500 Table Ø: 600mm Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Feed rate B-Axis: 30Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 11kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 8000mm Width: 3325mm Height: 3060mm Weight: 12000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, beautiful veneer saw with planing unit Lajdpfoq Rb Irjx An Ueb cutting length 3100 mm with rear fence

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: AC, cooling capacity: 56 kW (76.14 HP), type of cooling: water, input frequency: 50 Hz, heating capacity: 67 kW (91.09 HP), fuel type: gas, "SANYO" PANASONIC ECO G Gas heat pump air conditioner Model: SGP-E190J2GU2W Nissan K25 Engine Power source: 230 V AC, 1 Phase, 50 HZ Max electrical input: 1,16 kW, 5,4 A (Continuous) Unit protection: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Heat input (HS)(Cooling): 43,5 kW Heat input (HS)(Heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high side: 30 bar Design pressure low side: 16 bar OUTDOOR USE ONLY! Lsdpfx Ansd Tiu Eo Ujab We have 4 pieces on Stock!

Year of construction: 2013, condition: used, cutting diameter 420 mm saw band length 41 x 5600 mm cutting width 1,3 mm Lsdpfx Ansd Izmas Ujab Control Simatic S7 Touch band speed 17 - 110 m/min sawing motor 7,5 kW diameter of round bars 420 x 3000 mm diameter of round bars 300 x 6000 mm total power requirement 30 kW weight of the machine ca. 18,5 t dimensions of the machine ca. 12,5 x 5,0 x 2,5 m CNC sawing machine with band saw JAESPA Compact 4S and round steel magazine and discharge gripper for sawing round bars from 50 - 420 mm and 6 pockets with a max. bar weight per pocket of 3400 kg. Cut-off lengths 20 - 1000 mm. As good as new condition, approx. 1,000 working hours.

Condition: ready for operation (used), Year of construction: 2012, controller manufacturer: SIEMENS, controller model: 840 D, number of axes: 4, This 4-axis Mazak VTC 800/30SR was manufactured in 2012. It features a high-pressure coolant system at 15 bar, a 48-tool magazine, and dual auto tool length measurement units. Equipped with Siemens software, a Visiport, and an RMP60 probe, it's ideal for precise vertical machining tasks. If you are looking to get high-quality milling capabilities, consider the Mazak VTC 800/30SR machine we have for sale. Contact us for more information. • High-pressure coolant (15 bar) • Auto tool length measurement x 2 units • Visiport • 19" screen • Siemens software P • Signal tower • Additional work light • RMP60 probe • Bracket for NCRT for vertical use • Table centre partition • 48-tool magazine Lodpfxsx D I A So An Usab Additional equipment • Consep 2000 (chip conveyor/coolant system) for 15 bar, left-hand discharge

Condition: refurbished (used), Measuring Range X/Y/Z = 900 x 1200 x 850mm Accuracy 4,0 + 4,5L/1000 (origin setup, now better after Retrofit) Ljdpfx Ansdpak Ro Ueab Completely refurbished 2018 with new Pantec Eagle Pro Controller Probesystem is Renishaw PH10MQ and SP25M Software Inspect3D Inca Premium actual version Computer is a HP z240 Option : Laserscanner (e.g. Kreon) Probe changer

Condition: good (used), Year of construction: 2014, center height: 180 mm, center width: 600 mm, grinding diameter: 260 mm, Sinumerik 840D sl cnc control tail stock measuring device diamant roll portal loading device Technische Daten / technical details: Spitzenweite / center to center 600 mm Spitzenhöhe / center height 180 mm max. Schleifdurchmesser / max. grinding diameter 260 mm Lsdpjvygwwofx An Uoab Schleifscheibenmaß / grinding wheel dimension 600x80x304,8 mm Reitstock / tail stock MK4 Antriebsleistung Schleifspindel / drive capacity grinding wheel 12 kW Gewicht der Maschine / weight 7500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), 5-axis Year of production: 2018 Laodpfx Asun Rqgsn Ueb Machine working area dimensions for the X and Y axes: X 2100 mm Y 3100 mm Head stroke in the Z axis: 1250 mm Machine travel speed X, Y. Z: X: 80 m/min Y: 80 m/min Z: 12 m/min Vacuum table BECKER pump HITECO spindle in the HSK 63F standard Price of a new machine: approx. 135.000 €

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iB Lasdpfxjyhb D Es An Ueb

Condition: excellent (used), Sunnen GH210 Horizontal Hone Year 2010 Max Stroke 8000mm, Spindle Speed:0 - 300 rpm Maximum Spindle Power: 40 Hp (29.83 kW) Maximum Stroker Power: 18 Hp (13.42 kW) Stroke Speed Range: 0 – 100 ft/min (0 – 30.5 m/min) I.D. Range: 2 – 24 inches (50.8 – 609.6 mm) O.D. Range: 26 inches standard (660.4 mm) Maximum Part Weight: 8000 kg Approximate Machine Weight: 12,066 kg Ljdpfxjw U Uh Do An Ujab 400 VAC 50 Hz, 3-Phase (85 A) Siemens Simatic Control,