Used Mills for sale (118)

Condition: used, Year of construction: 2002, beside the press granulator Rapid 1528 2,2 KW Manufacturer: Rapid Manufacture year: 2002 Power: 2,2 kW Intake: 280x150 mm mm Rotor knife: 12 Stator knife: 2 Rotor diameter: 150 mm Rotor width: 280 mm Rapid 1528 2,2 KW year 2002 knifes like new price: € 1,850 Guodoxbq Tbepfx Aaceh contact: Mr. Rainer Eckerle

Condition: good (used), Equiptec 600-litre dryer Gjdol Sknxjpfx Aacjuh

Condition: used, Plastic mill Guedpfx Asxfv A Noacoh

Year of construction: 1977, condition: ready for operation (used), A Rapid heavy-duty granulator is available. Only unreinforced polyolefins were ground with the mill, so it was not subjected to any load. Flour chamber opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, sieve: 8mm, throughput: depending on material. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection is possible. Gedpfx Aovwcxfoacouh

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,000 kg, rotor diameter: 400 mm, number of blades: 6, rotor length: 600 mm, rotor width: 400 mm, power: 22 kW (29.91 HP), filling opening width: 490 mm, filling opening length: 590 mm, warranty duration: 12 months, input voltage: 400 V, The compact inline granulators of the GST series are designed for use in injection molding and blow molding operations. They are suitable for recycling, for example, voluminous parts such as bottles, canisters, crates, sprues, and molded parts. Thanks to the low feed height, the machines can be easily loaded by hand or with a small conveyor belt. The low noise emissions and space requirements make the GST series the ideal solution for inline size reduction. All GST series machines feature a compact, soundproofed housing and a noise-insulated feed hopper. The feed hopper can be tilted open and closed via a gas strut. The compact granulators are available with two rotor diameters (250 mm, 400 mm) and rotor widths from 300 to 1000 mm. The smaller models feature an open F-rotor, while the larger machines come equipped with the heavier S-rotor. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material blockages. Thanks to the modular design, the granulator can be easily upgraded with additional options such as replaceable wear plates. As with all ZERMA granulators, rotor and stator knives can be adjusted outside the machine to minimize downtime during maintenance. A setting gauge is included in the delivery. The control cabinet is mounted externally on the noise protection enclosure, with internal wiring throughout the system. Technical specifications: Rotor diameter (mm): 400 Rotor width (mm): 600 Drive (kW): 22 Rotor knives (rows): 3 x 2 Stator knives (rows): 2 Screen perforation (mm): > 6 Cutting chamber size (mm x mm): 400 x 600 Weight (approx. kg): 2000 Gsdpfxsvgncuo Aacsuh

Year of construction: 2021, condition: new, I will sell unusefd a VESPA 50/80 VGA mill. We are selling due to a change in the production profile. The cost of a new one is over 50,000 Euro. The mill is designed to recycle plastic waste and rejects, primarily from injection and blow molding processes. Year of manufacture: 2021 Capacity: up to 900 kg/h Rotor length: 800 mm Rotor diameter: 500 mm Rotor speed: 580 rpm Mobile knives: 6x400 no/mm Fixed knives: 4x400 no/mm Dimensions LxWxH: 2340x1630x3315mm Motor: 45kW Cooling: air Tank opening: manual Infeed opening: 820 x 565 mm Feed opening height: 2660 mm Diameter of sieve holes: 10 mm Sound-absorbing AEG fan motor: 7.5 kW Fan turbine diameter: 500 mm Flexible pipes: ⌀ 150 mm / ⌀ 125 mm Guodekzhfijpfx Aaceh Frame dimensions with cyclone Lx BxH: 2690 x 1440 x 4800 mm Weight with fan and cyclone: ​​4600 kg Included: - A set of spare knives - Spare sieve

Condition: used, Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs Gujdpfsb Hiylox Aacjh -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

Condition: good (used), Silo Mixer Beccaria 300 liters Gjdpfx Ajl Sknuoacjuh

Condition: used, Year of construction: 2009, Screenless Mill Xtra2-A / 26.26 St Slow-running screenless mill, equipped with two coarse pre-crushers, compact and mobile on 4 wheels, 2 of which are fitted with brakes. The feed hopper and cutting chamber can be easily and fully opened via a hinge mechanism and quick-release fastener, allowing for quick and easy cleaning. A crusher rotor with two pre-crushers, each featuring two breaker fingers, enables the processing of awkward and larger pieces of material. Technical data: • Motor power: 1.5 kW • Power supply: 3 x 400 V, 50 Hz • Cutting chamber opening: 260 mm x 260 mm • Pre-crushers: 2 units, each with 2 breaker fingers • Rotor speed: 32 rpm • Rotor: multi-tooth, 3 units • Static blades: 2 x 3 hardened blades • Cutting configuration: standard 4 mm cutting module (rotor tooth width); optional 5 mm Gsdpfx Asw Tumqeaceuh The mill is mounted on a high base but is also available with a low base as shown in the picture. The mill has been overhauled and is as good as new.

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Gjdpfjucw S Sox Aacjuh

Condition: reconditioned (used), partly overhauled granulator input 350x420 mm drive 11 kW new control board Optional: blower, pipes and cyclone against add. costs Ready for test-run with your material We have more granulators and shredders in stock, as; TRIA Herbold Gujdpfogchddox Aaceh Dreher Erema Vecoplan Alpine-Hosokawa Ask for our actual machine-stock-list or visit us in Wuppertal-Germany. You´re welcome

Year of construction: 1994, condition: used, functionality: fully functional, Plastic granulator with feed conveyor and dedusting system The CONDUX plastic granulator CS 300/300-S-II is a reliable solution for the size reduction and granulation of plastics. Equipped with an integrated feed conveyor and dedusting system, it ensures continuous processing in a clean working environment. Its robust design guarantees durability and consistent performance, making it ideal for recycling and recovery processes. Guedewtfavspfx Aacoh

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW Gusdpfxsh Di H Dj Aacsh -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Condition: good (used), Mouth width: 150x80mm Gujdpfx Aofhnv Ijacjh 2 rotor blades (95mm)

Condition: used, functionality: fully functional, The Rapid brand grinder is for sale; Gjdpfx Ajr Axcbsaceuh 3 axles 2 knives each which are good Impeller available

Year of construction: 2022, condition: ready for operation (used), A Getecha plastic granulator is available. Rotor diameter: 300mm, cutting width min./max.: 400mm/1260mm, number of rotor knives: 5, power: 5.5kW. Including an enlarged control cabinet. Overhauled with less than 100 operating hours. Documentation available. Gjdpfjucw S Esx Aacsuh

Condition: new, Year of construction: 2024, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces The best features of the proven GST and GSC series have been integrated into a compact redesign, with particular emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths of 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material feed and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to reduce maintenance downtime. The highly tangential, curved rear wall of the cutting chamber combined with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling voluminous parts such as bottles, canisters and crates. Due to the low feed height, the machines can be easily fed with material by hand or a small conveyor belt. The low noise emission and small footprint make the granulator the perfect solution for inline shredding 98T8Mrx Optional rear panel with higher stator knife M version: The feed method with a higher stator blade is better suited for thicker-walled and more compact parts, such as injection-molded parts, profiles, sheets, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high-quality regrind is achieved regardless of the material type or shape, e.g. injection molded parts, profiles, plates, etc. Godpfxjt Aagao Aacjuh Control system and control cabinet: The integrated control and control panel not only complies with all applicable safety regulations, but can also be adapted to specific requirements. In addition, peripheral equipment such as feed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 cyclone Rotor diameter (mm) 250 Rotor width (mm) 450 Drive (kW) 7.5 Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 700 Feed opening (mm) 380 x 450 Opening feed option of the M version (mm) 295 x 450

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Mill is equipped with new blade set without control, without sieve -Manufacturer: RAPID, side mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter knives: 2 pieces -Inlet cross-section: 600 x 300 mm Guodpewg Axvsfx Aacjh -Rotor width: 610 mm -Rotor diameter: 300 mm -Number: 2 cutting mills available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Year of construction: 2015, condition: ready for operation (used), A total of seven identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Gedpfewxd Upox Aaceuh

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, Optimization of an established concept. Shredding of large-volume blow-molded parts as well as start and end pieces The best features of the proven GST and GSC series have been integrated into a compact redesign, with particular emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths of 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material feed and prevents material jams. As with all ZERMA granulators, the rotor and stator knives can be adjusted outside the machine to reduce maintenance downtime. 98T8Mrx The highly tangential, curved rear wall of the cutting chamber combined with the aggressive open rotor design ensures reliable material intake and minimizes the risk of blockages. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling voluminous parts such as bottles, canisters and crates. Due to the low feed height, the machines can be easily fed with material by hand or a small conveyor belt. The low noise emission and small footprint make the granulator the perfect solution for inline shredding Optional rear wall with higher stator knife M version: The feed method with a higher stator blade is better suited for thicker-walled and more compact parts, such as injection-molded parts, profiles, sheets, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high-quality regrind is achieved regardless of the material type or shape, e.g. injection molded parts, profiles, plates, etc. Control system and control cabinet: The integrated control and control panel not only complies with all applicable safety regulations, but can also be adapted to specific requirements. In addition, peripheral equipment such as feed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available, which reduces power consumption during idle times and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 cyclone Rotor diameter (mm) 250 Rotor width (mm) 450 Drive (kW) 7.5 Guedpfx Aoum Rnvoacsh Number of rotor blades 3 x 2 Number of stator knives 2 Screen perforation (mm) > 6 Weight approx. (kg) 700 Feed opening (mm) 380 x 450 Opening feed option of the M version (mm) 295 x 450

Year of construction: 2003, condition: ready for operation (used), Opening dimensions: 450x500mm, rotor diameter: 400mm, rotor speed: 450/min, length: 1090mm, width: 1700mm, height: 2120mm, weight: 1.75t, connected load: 22kW, with cyclone separator and documentation, decommissioned since 2016, on-site inspection is possible. Gjdeq A Un Iopfx Aacjuh

Year of construction: 2025, condition: new, The G and H series compact mills are primarily designed for use in injection molding and blow molding applications for recycling voluminous product parts such as bottles, canisters and crates, as well as flush blow molding and injection channels. Their low height makes them ideal for use with manual feeding of such parts. The low noise level and small footprint This makes them perfect for inline recycling operations. Advantages: Compact design, small footprint. All knives are adjusted outside the machine in a fixture to reduce downtime for maintenance Gedpfx Aep N Drxsaceuh Aggressive feed due to curved rear wall of the cutting chamber Large screen area for high throughput rates Advanced V-Cut technology produces a high quality grind while reducing energy consumption and noise levels Rotor diameter (mm) 250 Rotor width (mm) 450 Drive capacity (hp) 15 Rotor blades (pieces) 3 x 1 Stator knives (rows) 2 Hopper opening (mm) 340 x 450 Total length (mm) 1207 Length machine (mm) 860 Width total (mm) 1020 Width machine (mm) 684 Height (mm) 1712

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Gusdpfxen Tpmus Aaceh

Year of construction: 2025, condition: new, Size reduction of large-volume blow molded parts as well as start and end pieces In a compact redesign, the best features of the proven GST and GSC series have been integrated, with special emphasis on weight, handling and energy efficiency. These compact granulators are equipped with complete sound insulation, resulting in extremely quiet operation. The granulators are available with 250 mm rotor diameters and widths from 300, 450 to 600 mm. The curved rear wall of the cutting chamber ensures aggressive material intake and prevents material jams. As with all ZERMA granulators, the rotor and stator knives are adjustable outside the machine, reducing downtime for maintenance. The highly tangential, curved rear wall of the cutting chamber, combined with the aggressive open rotor design, ensures reliable material pickup and minimizes the risk of jams. The compact granulators are suitable for use in blow molding operations. They are suitable for recycling e.g. voluminous parts such as bottles, canisters, crates. Due to the low feeding height, the machines can be easily fed with material by hand or by a small conveyor belt. The low noise emission and the small footprint make the granulator a perfect solution for inline size reduction Optional rear panel with higher stator knife M version: The feed method with a higher positioned stator knife is better suited for thicker walled and more compact parts, such as injection molded parts, profiles, plates, etc. Due to the cutting geometry and the lower aggressiveness of the rotor, a high quality regrind is obtained regardless of the material type or shape, such as injection molded parts, profiles, plates, etc. Control system and control panel: The integrated control system and control panel not only comply with all applicable safety regulations, but can also be customized to meet specific requirements. In addition, peripheral equipment such as infeed conveyors, metal detection and unloading systems can be seamlessly integrated into the machine's control system. For improved efficiency, an optional intelligent energy saving function is also available that reduces power consumption during idle periods and can automatically start and stop the system based on the status of upstream machines. Standard configuration with blower, power consumption 0.75 kW and 400 er cyclone Rotor diameter (mm) 250 Rotor width (mm) 300 Drive (kW) 7.5 Number of rotor blades 3 x 1 Number of stator knives 2 Screen perforation (mm) > 6 Gsdpfx Ajp Sr Ansacouh Weight approx. (kg) 950 Feed opening (mm) 380 x 300 Feed opening option of M version (mm) 295 x 300

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Guodpon Tpmxofx Aaceh