Used Emcomat 20 D for sale (64,680)

Condition: excellent (used), - Digital 3-axis position display. - Accessories included. Working Range Centre distance: 1000 mm Centre height: 200 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 250 mm Distance from top slide to turning centre: 40 mm Bed width: 260 mm Longitudinal slide travel: 900 mm Cross slide travel: 220 mm Top slide travel: 110 mm Bed carriage guide length: 380 mm Turning tool cross-section: 20 x 20 mm Spindle Spindle nose according to DIN 55 029 (Camlock): 5" Spindle bore: Ø 50 mm Internal taper according to 7178: 1:22 Max. faceplate diameter: Ø 260 mm Max. chuck diameter: Ø 200 mm Bwodpfx Aew U Ac Njgzsi Spindle speeds: 40 – 3000 rpm Speed control: stepless Mechanical speed ranges: 4 Drive Motor Three-phase AC motor with integrated brake Infinitely variable speed (frequency inverter) Power at 40% duty cycle: 5.3 kW Max. nominal torque at main spindle: 640 Nm Tailstock Quill diameter: Ø 50 mm Quill stroke: 120 mm Quill internal taper: MT 3 Machine Dimensions Overall length: 1950 mm Overall height: 1635 mm Overall width: 1060 mm Spindle height above floor: 1133 mm Total machine weight: 865 kg

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Emcomat Emco EM20D Lead and Feed Lathe, built in 1995, in excellent condition, CE compliant! Technical specifications: Bwjdpfxswag Stj Agzsi >> Year of manufacture: 1995 >> Center height 200 mm >> Swing over bed 400 mm >> Swing over cross slide 250 mm >> Turning length: 1000 mm >> Spindle speed: 4 speed levels, continuously variable from 35-3000 rpm >> Quill stroke 120 mm >> Tailstock: MT3 >> Spindle bore: 50 mm >> 20 longitudinal feeds 0.045 / 0.787 mm/rev >> 20 cross feeds 0.023 / 0.406 mm/rev >> Space requirements / installation dimensions approx. length 1.900 x depth 0.9 x height 1.3 meters >> Weight approx. 850 kg Accessories and equipment: >> 3-axis position indicator >> 1 piece Three-jaw chuck with 1 set of jaws >> Tool holder with 3 pockets >> Chip return wall >> Coolant system >> Bed stop About the machine: Offered is an Emcomat 20D centerline and feed spindle lathe, built in 1995, in lightly used condition. The machine is fully functional. All slides run very smoothly and evenly. The bed guides are in very good condition. Take advantage of the opportunity to view this machine on-site under power and see for yourself its condition.

Condition: used, empty load weight: 1 kg, maximum load weight: 42,999 kg, overall weight: 43,000 kg, axle configuration: > 3 axles, first registration: 06/2015, suspension: air, tire size: 385/55 22,5, tire condition: 50 %, color: black, Year of construction: 2015, front tire size: 385/55 22,5, rear tire size: 385/55 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 41033 D-Tec, Multichassis * Year of manufacture: 2015 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Air connection coupling head (red + yellow) * Connection plug 2x7-pin * Connection plug 15-pin * Lifting and lowering mechanism * Storage box / toolbox * Suspension: Air Bwsdpfxeyqnvte Agzoi * Gross vehicle weight: 43,000 kg * Unladen weight: 1 kg * Payload: 42,999 kg * Permissible total weight: 43,000 kg * Tire condition 1st axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire condition 2nd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 385/55 R22.5 * Tire size: 385/55 R22.5 * D-Tec VCC-01 * Central and rear extensions, Multichassis * 2x20/20/30/40/45 HighCube * Generator, year 2016 * Type: Modular Stage 4 * 16 kW at 1500 rpm * 12 Volt and 380 Volt * 4,054 operating hours, stainless steel storage box * Good condition, operated by an owner-operator Disclaimer: Subject to change, prior sale, and errors excepted. You can find further photos and videos on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Procurement of all (export) documents * Ordering of export / customs license plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration services * Transfer of commercial vehicles Please contact our trained specialist staff for advice – we are happy to assist you.

Condition: excellent (used), axle configuration: 3 axles, first registration: 04/2021, suspension: air, color: black, Year of construction: 2021, Make axles: SAF Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle Empty weight: 3.216 kg Carrying capacity: 40.784 kg GVW: 44.000 kg Technical condition: very good Visual appearance: very good Bwedpfx Agoxu Ddgszoi

Condition: not inspected (used), functionality: unexamined, total width: 430 mm, total length: 650 mm, total height: 1,100 mm, overall weight: 50 kg, rotational speed (max.): 2,800 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bwedpfx Aeyn Igyjgzsi Operating voltage: 220/380 V Rated current: 2.25/1.3 A Speed: 2,800 rpm Grinding wheel dimensions: 200 mm MACHINE DETAILS Length: 650 mm Width: 430 mm Height: 1,100 mm Weight: 50 kg EQUIPMENT (No accessories specified)

Condition: ready for operation (used), Year of construction: 1997, Immediately available from toolmaking: CNC vertical machining center Hedelius Type BC 40 D/20 Year of manufacture: 1997 Control: Siemens Sinumerik 840 D 4th axis Table: 2 x 1100 x 420 mm Pendulum machining possible Table load: 500 kg Bwsdpfx Aoyl Ugzegzei Travel (X/Y/Z): 1700/400/400 mm SK 40 Magazine for 20 tools Spindle speeds: 30 – 6000 rpm Rapid traverse in all axes: 30 m/min Drive power: 20 kW Weight: 7 t Price: EUR 12,500.— plus VAT ex location

Condition: used, functionality: fully functional, Year of construction: 2008, operating hours: 10,480 h, load capacity: 2,000 kg, lifting height: 5,050 mm, free lift: 150 mm, fuel type: diesel, mast type: simplex, construction height: 3,100 mm, fork length: 1,200 mm, drive type: Diesel, Diesel Forklift Load Centre: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Standard Transmission: Double pedal Condition: Operational and fully functional Technical Condition: Good Front Tyres Type: Super elastic Front Tyres Size: 23x9-10 Front Tyres Condition: 20 - 40% Bedpfx Ageyl A N Rezowi Rear Tyres Type: Super elastic Rear Tyres Size: 23x9-10 Rear Tyres Condition: 20 - 40% Description: Delivery includes new FEM 4.004 inspection with inspection book. For further questions, please feel free to call us. In addition to this model, we have approximately 150 other industrial trucks in stock. Feel free to browse our website fleischmann-foerdertechnik. We are happy to offer you attractive leasing & financing options as well as delivery at favourable rates. Trade-in of Linde equipment is also possible – even without purchasing another unit from us. Indicated operating hours refer to the reading at the time of listing. Subject to prior sale, alterations, and errors. Side shifter, integrated side shifter (Seith) 3rd valve, 4th valve, 4th valve to fork carriage unrestricted

Condition: used, machine/vehicle number: WSK00000001246641, axle configuration: 3 axles, first registration: 08/2009, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2009, = Additional options and accessories = - ADR - Air Suspension - BPW Axles - Disc brakes = More information = Bwodpfx Asyhb H Tsgzsi Tyre size: 385/65 Make axles: BPW Tyre profile: 40% Brakes: disc brakes Suspension: air suspension

Condition: used, Year of construction: 2000, Overview This bottle washer from the German manufacturer Klinger was built in 2000. The washer is made entirely of stainless steel, has a Siemens S7 control, 2-fold heaters and surge pumps for high cleaning performance. Technical details Capacity: 9,600 bph;   20 bottles per row Scope of delivery bottle washer | Klinger | Euro Class-D 20/1/73 | 2000 water treatment plant | Hager + Elsässer | 2000 incl. cation and anion exchanger, incl. salt container, pre-filter and UV probe with a capacity of 5 m3/h and  The water treatment system was designed to operate the bottle washer and the RO system RO reverse osmosis plant | Hager + Elsässer | 2000  with full desalination capacity of 2.5 m3/h Bwjdpfxjtxd A So Agzji

Condition: excellent (used), Year of construction: 2020, operating hours: 10,978 h, lifting height: 4,250 mm, fuel type: diesel, mast type: duplex, power: 26 kW (35.35 HP), motor manufacturer: Volkswagen, total height: 2,650 mm, total length: 2,400 mm, total width: 1,100 mm, color: other, Equipment: air conditioning, seat heater, Year of manufacture: 2020 Empty weight: 3.415 kg Lifting capacity: 2.000 kg CE mark: yes Technical condition: very good Visual appearance: very good General Country of production: Germany Condition Bodpfxeyf Uwgo Agzjwi CE type: CE

Condition: excellent (used), Year of construction: 2020, operating hours: 9,699 h, lifting height: 4,250 mm, fuel type: diesel, mast type: duplex, power: 26 kW (35.35 HP), motor manufacturer: Volkswagen, total height: 2,650 mm, total length: 2,400 mm, total width: 1,100 mm, color: other, Equipment: air conditioning, Year of manufacture: 2020 Empty weight: 3.409 kg Lifting capacity: 2.000 kg CE mark: yes Technical condition: very good Visual appearance: good General Bwjdpfx Agsyf Uv Nezoi Country of production: Germany Condition CE type: CE Air-conditioned cab, Side-shift

Year of construction: 2000, condition: ready for operation (used), A complete bottle rinsing system with Klinger bottle rinsing machine, Hager + Elsässer drinking water treatment system and Ro reverse osmosis system is available. 1) Bottle washer Klinger Euro Class-D 20/1/73, year of construction: 2000, capacity: 9600 bottles/h, cycle time: 7.5s, cycle time: 12.63min, bottles per row: 20, number of rows: 107, max. bottles in the machine: 2020, water consumption: 3.8m³/h, tank volume soft caustic/post-caustic: 5600l/740l. Dimensions X/Y/Z: approx. 8000mm/3400mm/2800mm, weight: approx. 16000kg, control system: Siemens S7. 2) Drinking water treatment plant Hager +Elsässer consisting of cation and anion exchanger, capacity: 5m³/h. Including salt tank, pre-filter and UV sonde. 3) RO reverse osmosis system, full desalination capacity: 2.5m³/h. Documentation available. On-site inspection is possible. Bsdpfx Agjtwqzlozjwi

Year of construction: 2026, condition: new, functionality: fully functional, The laboratory extruder model EX20-25d is designed for small-scale material development, small batches, or filament extrusion. It has a plasticising capacity of 5kg/h. Our extruder model is designed with a bimetallic barrel and through-hardened screw, allowing for high-temperature processing (up to 400 degrees). Bedpfx Ajiv H Ekegzewi This enables the processing of abrasive raw materials, engineering plastics, PEEK, metal compounds, ceramics, and fibre-reinforced materials. Inspect available machines at our factory in Königswinter. We can also provide machines in other dimensions.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, pedestal grinder -Manufacturer: Greif, double grinding wheel type D 20/4 -Grinding discs: max. Ø 250 mm -Motor power: 0.37 kW Bjdpfov Hawqsx Agzswi -Speed: 1400 rpm -Operating voltage: 220/380 volts -Dimensions: 500/310/H315 mm -Weight: 40 kg

Condition: used, Hydraulic cylinder, synchronous cylinder, steering cylinder -Piston diameter: 38 mm -Piston rod: Ø 16 mm (M12 thread) Bwodpfodkf I Tex Agzji -Stroke: 20 mm -Dimensions: 234/89/H50 mm -Weight: 3 kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer Bwjdpfxjfitfle Agzoi -Three phase transformer -Type: D 32/20 50/60 Hz 6000 VA -Primary: 3x 400 V -Secondary I: 1x 110 V 6 A -Secondary II: 1x 230 V 6 A -Secondary III: 3x 18 V 10 A -Secondary IV: 3x 66 V 30 A -Dimensions: 420/175/H430 mm -Weight: 80 kg

Condition: used, Year of construction: 2007, Technical details: Bjdpfxox Apd Us Agzswi turning diameter over bed: 340 mm turning diameter over slide rest: 190 mm turning length: 700 mm spindle turning speed range: 40 - 3000 U/min spindle bore: 50 mm

Condition: excellent (used), functionality: fully functional, Emcomat 17D Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C New from Training Workshop Excellent Condition!!! Technical Data: >> Year of manufacture: approx. 2000 >> Machine no.: D3F H1 010 >> Centre height: 170 mm >> Swing over bed: 340 mm >> Swing over cross slide: 190 mm >> Turning length: 700 mm >> Spindle speed: 4 speed ranges, stepless from 35 to 3000 rpm >> Tailstock quill stroke: 120 mm >> Tailstock: MT3 Bodpfxewvuf To Agzswi >> Spindle bore: 50 mm >> 20 longitudinal feeds: 0.045 – 0.787 mm/rev >> 20 cross feeds: 0.023 – 0.406 mm/rev >> Required floor space approx. (L x D x H): 1.600 x 0.9 x 1.3 meters >> Weight: approx. 730 kg Equipment and Accessories: >> 3-axis digital readout from K&C, new, with 12 months manufacturer’s warranty and operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 1 piece three-jaw chuck NEW 160 mm, 2 sets of jaws >> Multifix B toolholder with 2 tool pockets >> Chip guard >> Coolant system About the machine: Offered here is an Emcomat 17D lead and feed screw lathe, approx. year 2000, in very good condition. The machine is of course fully functional. The bedways are in excellent condition. The Emco is equipped with a new 3-axis digital readout from K&C and a new three-jaw chuck. Take the opportunity to inspect the machine under power on site and see the condition for yourself.

Condition: ready for operation (used), Year of construction: 1997, Max. workpiece length: 3600mm, max. workpiece width: 1400mm, length: 8750mm, width: 5250mm. Bwjdpfeqvnl Tex Agzji

Condition: new, Machine according to DIN 8605: lathe with increased accuracy. Tip width: 700 mm Peak height: 170 mm Circulating diameter over bed: 340 mm Circulating diameter over flat slide: 190 mm Bed width: 260 mm Laengs schlitten: 600 mm Shifting path cross slide: 220 mm Shifting path upper slide: 110 mm Flat slide: 410 mm Flat slide width: 150 mm Guide load-length bed slide: 380 mm Rotary chisel cross-section: 20x20 mm Center of rotation distance - Upper slide: 34 mm Swing range upper slide (Support): 60/120° Main spindle: Spindle connection DIN 55029 (Camlock): S 5 Spindle bore: 50 mm Inner cone according to DIN 7178: 1:22 Spindle diameter in the front bearing: dia. 70 mm Max chuck diameter: 200 mm Max. washer diameter: 200 mm Bwsdpfx Agodctnbszji Spindle speeds: 40-3000 rpm Speed control: Stepless mechanical speed levels: 4 Main drive: Power at 40% ED: 5.3 kW Max rated torque a. d.Main spindle: 640 Nm Feed: 20 (28) Laengsvorschuebe Z: 0.045-0.787 mm/U 20 (28) Plan vorschuebe X: 0.023-0.406 mm/U Thread: 20 (28) metric thread (basic): 0.4 - 7.0 mm 32 inch thread (with option Raed replacement D3Z200): 56 - 4 Gg/inch 28 Module thread (with option Raed replacement D3Z200): 0.2 - 3.5 32 diam. Pitch thread (with option Raed replacement D3Z200): 112 - 8 Tailstock: Pinole diameter: 50 mm Indoor cone of the pinole: MK 3 Pinole stroke: 120 mm Side adjustment: x 13 mm Zulessige Werkstueckweights

Condition: excellent (used), mileage: 38,900 km, power: 188 kW (255.61 HP), first registration: 12/2022, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,250 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 8, emission class: euro6, total length: 9,750 mm, total width: 2,600 mm, loading space length: 74,000 mm, loading space width: 24,600 mm, loading space height: 26,000 mm, Year of construction: 2022, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, power assisted steering, power mirror, traction control, = Additional Options and Equipment = - Euro 6 - Height-adjustable steering wheel - Leather steering wheel - Air suspension - Front center armrest - Radio DAB MP3 Bluetooth 4.0 - Reversing camera - Sun visor = Remarks = Refrigeration unit brand: Carrier Bwedpfov I Tyuox Agzoi = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 7,698 cc Maximum front axle load: 7,500 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 9,746 kg Payload: 10,754 kg Gross vehicle weight: 20,500 kg Functionality Temperature range: 20 °C to -20 °C Body manufacturer: ZUIDWIJK SUPRA 850 Reefer engine: diesel and electric Maintenance, History and Condition APK (Technical Inspection): valid until 05.2026 Technical condition: very good Visual condition: very good Identification Registration number: 32-BTP-9

Condition: used, Used pin mill by Jehmlich (Germany) model Rekord D, designed in carbon steel. Mill body made of cast iron. Unit has milling discs with a diameter of 610 mm made of carbon steel. Mill has one fixed and one rotating milling disc driven by a belts driven with an ex proof electric motor with a power of 20 kW, 2940 rpm, 380 V, 50 Hz. Machine is equipped with a stainless steel feeding hopper and bottom unloading. Under the mill outlet is installed a screw conveyor constructed as follows: stainless steel chamber and a galvanized carbon steel screw driven by a gearbox and electric motor with power of 0,75 kW, 3-phase, 50 Hz with an operating speed of 125 rpm. Whole thing is mounted on a frame made of carbon steel. Bodpfxjygvpaj Agzswi Specifications: Horsepower: 20 kW Material Of Construction: Cast iron and carbon steel Type Of Mill: Pin mill

Condition: used, Ferwood Code: RU0001121 - Condition: Used - Compatible Machine: CNC SCM - If interested we offer a revision service, contact us. Bodpfx Aju U D N Uegzowi

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with Emco digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special production department of a renowned German mechanical engineering company. CE-compliant! Technical data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working Area Travel distance in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4,000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Internal taper: MK 2 Quill stroke: 80 mm Dimensions (LxWxH): 1,280 x 730 x 1,480 mm Machine weight: 420 kg About the machine: Bjdpfx Agexyvbnjzowi The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest demands: with stepless speed control, constant cutting speed, and a robust 7.5 kW drive power (40% duty cycle). The compact machine with outstanding performance is ideal wherever maximum precision in limited space is required, such as optical, electrical, and automotive workshops, laboratories, and even Formula 1. Offered here is a lathe EMCO EMCOMAT 14 D with Emco digital readout, manufactured in 2006. This lathe is in excellent original condition. It was only used occasionally in special production. The control system is very user-friendly. The guides are regularly lubricated by a central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. You are welcome to inspect and test the EMCO EMCOMAT 14 D under power at our premises. You will find further lathes from renowned manufacturers on our website.

Condition: good (used), Year of construction: 2006, EMCO EMCOMAT 14 D Lathe EMCO EMCOMAT 14 D with EMCO digital readout, year of manufacture 2006, in excellent original condition. The machine comes from the special construction department of a renowned German mechanical engineering company. CE compliant!! Technical Data: Year of manufacture: 2006 EMCO EMCOMAT 14 D Technical Data Working area Travel in X/Y/Z: 135 / - / 590 mm Centre distance: 650 mm Centre height: 140 mm Main spindle Max. speed: 4000 rpm Spindle mount: Size 4 (DIN 55029) Max. drive power: 7.5 kW Tailstock Quill diameter: 30 mm Inner taper: MT 2 Quill stroke: 80 mm Dimensions (LxWxH): 1280 x 730 x 1480 mm Machine weight: 420 kg About the Machine: The EMCOMAT 14D is the smallest machine in the EMCOMAT series. The EMCOMAT 14D is a lathe designed for the highest standards: with infinitely variable speed control, constant cutting speed, and a robust 7.5 kW drive (40% duty cycle). This compact powerhouse excels wherever maximum precision is required in limited space, such as in optical, electrical, and automotive workshops, laboratories, and even in Formula 1. For sale is an EMCO EMCOMAT 14 D lathe with EMCO digital readout, year of manufacture 2006. This lathe is in excellent original condition. It comes from a facility where it was only lightly used for special construction purposes. It features an extremely user-friendly control. The ways are regularly lubricated by the central lubrication system. The EMCO EMCOMAT 14 D has been mechanically and electrically tested by us. Take the opportunity to view and test the EMCO EMCOMAT 14 D under power on-site. Bjdpfxoxyvbbe Agzjwi You will find more lathes from well-known manufacturers on our website.