Used Copying Milling Machine for sale (65,251)

Condition: excellent (used), Year of construction: 2002, High-quality copy lathe, woodturning lathe with milling unit, PLC-controlled. A video of the machine in operation can be sent upon request. PLC-controlled wood copy lathe for turning and milling. The machine has two controlled axes: the longitudinal axis and the rotary axis. Input of various feed rates and corresponding lengths during turning, as well as additional divisions and pitches during milling. Multiple programs for turning and milling operations can be stored. Hydraulic copy sensing of a template or pattern. The roughing and copying tools are equipped with fine adjustments. Template adjustment can be made from the front and rear via fine-threaded spindles. Ljdpfxjzfwm Ns Al Ijhh The copy length can be divided into up to 6 sections with different feed rates for turning highly contoured workpieces. Drive motor 400V / 3kW with electric motor brake. Two speed stages adjustable via belt drive; within each stage, the speed can be continuously adjusted via a frequency inverter. Speed stage 1: 200 - 2000 rpm Speed stage 2: 350 - 3400 rpm Center distance approx. 1550mm Copy length with steady rest approx. 1350mm Bed length approx. 2100mm Feed rate continuously adjustable, rapid traverse with safety end stop. Hydraulic copy carriage with V-shaped turning tool. Spindle with M33 thread and MK3 internal taper. Tailstock MK3 and with quick-release mechanism. Extensive accessories: Ring steady rest with front turning tool and insert guide Four-jaw steady rest Four-jaw chuck 125mm Copying tools, center punches, hex drive, etc. Milling unit with 3kW motor for mounting on the copy carriage. 5 milling heads available, only the 16mm collet is missing. CE marking Operating manual V-belt new Original paint, only a few spots have been touched up. Very good condition from a small carpentry shop. It is evident that the machine was not used to produce large quantities. Dimensions approx. 2600 x 1300 x 1300mm (LxWxH). Weight approx. 800kg. The machine can be demonstrated on site after prior arrangement. We only offer machines that are ready for demonstration and are in our warehouse; see "other offers from this provider".

Condition: ready for operation (used), Year of construction: 1984, Deckel Copy Milling Machine Model KF 3 S Year of manufacture: 1984 Table surfaces: 600 x 555 / 620 x 750 mm Y-axis travel: 150 mm Z-axis stroke: 380 mm X-axis stroke: 150 mm Drive: 3 kW Roughing spindle Finishing spindle Locking arm Ledjzgadtepfx Al Iohh Control lever with cable Tracing stylus holder Collets Weight: 2400 kg Price: EUR 2,000—plus VAT, ex works

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 108/1008-3, functionality: fully functional, power: 4 kW (5.44 HP), total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, overall weight: 750 kg, workpiece width (max.): 180 mm, number of spindles: 2, TECHNICAL DETAILS Number of spindles: 2 Max. workpiece width: 180 mm MACHINE DETAILS Main motor power: 4.0 kW Lhsdjy Tnitepfx Al Ish Dimensions & Weight Dimensions (L x W x H): 1,750 x 1,500 x 1,450 mm Net weight: 750 kg EQUIPMENT CE marking

Condition: used, Year of construction: 2008, total length: 1,750 mm, total width: 1,500 mm, total height: 1,450 mm, Empty weight: 750 kg Lhodpfx Aeych Elsl Ish Price: On request - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 108/1008-3 - Main motor power [kW]: 4.0 - Number of spindles [pcs]: 2 - Max. workpiece width [mm]: 180 - Transport dimensions: 1750mm x 1500mm x 1450mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, x-280 ,y- 200 , Z 315 , Tischabmessungen 380x380/250x500 Sehr viele Schriftsaetze,wesentlich mehr als abgebildet Lodpfx Aleddxb Ne Ishh

Condition: good (used), Year of construction: 2000, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, rotational speed (max.): 12,000 rpm, I am offering my Rotox KF 347 copy milling machine for sale, which is in good condition. It is fully functional and ready for use in your workshop. -Model: Rotox KF 347 -Power: 1.5 kW -12,000 RPM -Year of manufacture: 2000 -Voltage: 400 volts -Condition: Very good and fully functional Lodpfxoyxy Nco Al Iehh The machine is available for demonstration and can be tested at any time.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, rotational speed (max.): 12,000 rpm, Technical specifications – Elumatec AS 70/44 1-spindle copy milling machine for aluminum and PVC profiles Feature Value Machine type 1-spindle copy milling machine Milling range with stop 230 × 90 mm Milling range with copy template 230 × 90 mm Lhedpfx Alszgglke Ieh Clamping range for profiles 180 × 130 mm Milling stroke 110 mm Mains connection 230/400 V, 3 ~, 50 Hz Motor power 0.74 kW Spindle speed 12,000 rpm Operating pressure 7 bar Air consumption 12 l/cycle without spray device, 24 l/cycle with spray device Dimensions (L × W × H) 720 × 650 × 1,440 mm Weight approx. 120 kg Equipment Versatile for processing aluminum and PVC profiles. Copy milling in a 1:1 ratio using templates or stops. Pneumatic material clamping. Manual feeler pin with three levels for different cutter diameters. Pulse spray device for tool cooling. Simple operation via two control levers. Quick setup and high machining accuracy.

Condition: ready for operation (used), Year of construction: 2008, The Balestrini CP 100 (manufactured in versions such as CP 100/6 or CP 100/8) is an industrial, multi-spindle wood profiling and copying machine. It is used for precise shaping and copying of curved components. It is typically used in the production of chairs, bent furniture, and door and window frame elements. Technical specifications: Construction: The machine is equipped with several working units (heads) that operate simultaneously based on copying templates. Drives: Main motors with power usually exceeding 2.9 kW (up to 10 HP depending on the configuration), often powered by 380-400V. Lhsdpfx Aljzbc Rtj Ish Working equipment: It features tables with adjustable angles in two planes and a pneumatic clamping system that ensures the stability of the workpiece. Parameters: The machine allows for milling components with a length often exceeding 2000 mm in larger versions. The weight ranges around 900 kg.

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, milling length: 750 mm, milling spindle length: 750 mm, spindle stroke: 150 mm, Equipment: documentation/manual, Wigo 1016 Cross Milling Machine Working length: 750 mm Maximum milling height: 150 mm Spindle diameter: 50 mm Spindle motor power: 15 kW Lhsdpfxsxzimto Al Ieh Hydraulic pump motor: 3 kW Pneumatic material clamping Foot pedal control Machine dimensions: 1450 x 1600 x 1800h mm

Condition: excellent (used), Sibo Taus 2 1/2 Stylus Profiling Machine Working diameter 18-63mm Main engine with 5.5kw power Lhsdpfx Alsv Tv Urs Ieh Minimum length of the processed element 470mm Feed speed regulated by means of a variator Possibility of producing elements such as: billiard cues, broom handles, shovels, rakes or chair legs

Year of construction: 2002, condition: excellent (used), functionality: fully functional, ELUMATEC KF 178 – 3-Spindle Copying Router Technical Data Upper Routing Unit Routing area with stops or copying templates: 340 × 100 mm Stroke: 110 mm Lower Routing Unit Routing area with stops or copying templates: 240 × 85 mm Front stroke: 95 mm Rear stroke: 45 mm General Data Continuously adjustable speed from 3,000 to 12,000 rpm. Also suitable for thin-walled steel and stainless steel profiles. Clamping range for profiles: 115 × 100 mm Mains connection: 230/400 V, 3 ~, 50 Hz Motor power per spindle: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Lhjdpfozcz Dnox Al Ieh Dimensions (L × W × H): 980 × 1,250 × 1,610 mm Weight: 360 kg Equipment Ideal machine for economical door production. For routing lock cases, profile cylinders and rosettes in aluminum and PVC profiles. Three fully independently operating copying routing units. Separate control of the horizontal and vertical routing spindles. Workpiece clamping upwards against the lock assembly surface, eliminating the need for readjustment with different profile heights. “Spindle Lock” for quick tool changes. Flexible stop system with support rollers and adjustable folding stops. Profile cylinders and rosettes.

Condition: good (used), Year of construction: 2013, – 2 pneumatic clamps – 12,000 rpm – Mist lubrication system Ledpfx Ajy An U Iel Iehh – Weight 180 kg – 230V

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: - Equipped with 1 vertical and 2 horizontal milling motors Lhodpfxoy Nm Ero Al Ish - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm - Operation via switches and 4 hand levers

Year of construction: 2000, condition: excellent (used), As-new lock copy milling machine for PVC and aluminium profiles from a training workshop Key features: - 3-sided machining of sash and frame profile bars in a single clamping, e.g. for profile cylinders, handle holes, and lock cases - Equipped with 4 tracing pins for flexible and simple use of the template system Lhjdpfx Aloyrh Nco Ieh - Convenient insertion of the profile bar without interfering milling units - Manual profile bar rotation device for 3-sided machining - Optimum machining quality due to the design-based use of short tools Max. workpiece cross-section (W x H): 200 x 100 mm Milling area (L x W): 315 x 130 mm Plunge depth: 200 mm Speed: 12,000 rpm Drive power: 1.5 kW at 400 V Machine dimensions (L x W x H): 1260 x 820 x 1650 mm Machine weight: 340 kg Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, ELUMATEC AS 170 – Single-spindle profiling machine Technical data Milling area, horizontal, against stop: 300 x 120 mm Milling area, horizontal, using template: 285 x 110 mm Milling spindle speed: 12,000 rpm Profile clamping range: 150 x 130 mm, adjustable up to 400 mm Stroke: 105 mm Electrical connection: 230/400 V, 3 ~, 50 Hz Lsdeza Iifspfx Al Iohh Power output: 0.74 kW Compressed air connection: 7 bar Air consumption per working cycle: 12 l without spray device 24 l with spray device Dimensions AS 170/00 Length: 780 mm Depth: 770 mm Height: 1,500 mm Weight: 200 kg Features Large milling area despite compact design Profiling using side stops or templates (1:1) Pneumatic, two-stage tracing device for different cutter diameters Patented suspension of the tracing lever for precise milling Table height adjustment for profiles up to 400 mm high “Spindle Lock” for quick tool changes Pneumatic material clamping device Metering spray device

Condition: good (used), Pantograph Milling / Engraving Machine Stock number: 3098 Manufacturer: Scripta Machine number: Type / Model: SR 300 Travel range x-y-z: mm Ledoy H Hhbopfx Al Ijhh Pattern table / working table: 600 x 400 // 600 x 250 mm Speed range: 700 to 18,000 rpm, stepless Transmission: 1 : 1.33 to 1 : 10 Accessories/equipment: Font sets; others (see pictures) Power requirement: kW Condition: good Weight: 0.7 t

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 43655, functionality: fully functional, rotational speed (max.): 12,000 rpm, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Lodpfxsyxgzxj Al Ishh Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system The machine is ready for operation

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Horizontal cutting range using a stop 230 x 90 mm Horizontal cutting range using a copy template 230 x 90 mm Spindle speed 12,000 rpm Clamping range for profiles 180 x 130 mm Travel 110 mm Power supply 230/400 V, 3~, 50 Hz Power output 0.74 kW Lhodpfjxz Sknjx Al Ijh Compressed air supply 7 bar Air consumption per working cycle 12 l without spraying, 24 l with spraying Length 720 mm, depth 650 mm, height 1,440 mm, weight 120 kg Versatile for many applications in aluminium and PVC profile machining Precision routing with a minimum of effort and easy, two-lever operation Copy routing at a ratio of 1:1 transfers the cutting pattern from a template to the profile Your own custom templates can be created (by copying the template to a blank) Copy routing using stops is also possible (only rectangular cutting patterns) Can be set up in only a few steps Pneumatic material clamping unit Manual tracer point with three levels for different cutter diameters Pulsed coolant system Shipping on demand

Condition: used, functionality: unexamined, Copy Milling Machine DECKEL Ledpfjy Hf Aqjx Al Ijhh Model: KF 1 Machine No.: 61510 Year of manufacture: 1981 Weight approx.: 1 t

Condition: new, Year of construction: 2025, Equipment: CE marking, documentation/manual, - 2 pneumatic clamps - Cooling system - Material stop - Documentation Ljdpfegg N Tajx Al Iohh - 400V

Condition: excellent (used), Milling machine, copy router in very good working condition. Ljdpfx Aljx Rrtdo Ishh

Condition: new, – 2 pneumatic clamping devices Lhodpfx Alsyug Trj Ioh – Mist lubrication system – Emergency stop – Air blow gun – Documentation – 400V

Condition: good (used), Year of construction: 2008, machine/vehicle number: 3486579, Offer 26048 Single-spindle Copy Milling Machine for 3-Sided Processing Technical Data: - 3-sided machining in a single clamping for lock and euro-profile cylinder (PZ) cutouts, - e.g. milling in aluminium / plastic / steel profiles - Operated via two-hand lever - Material clamping by pneumatic clamping cylinder Lhsdpfx Ajyymgksl Ioh - Manual profile bar rotation device for 3-sided processing - Working range - x (crosswise) 250 mm - - y (longitudinal) 90 mm (depending on position) - - z (vertical) 120 mm (depending on position) - Max. profile height, depending on position: approx. 120 mm - Max. profile depth: 100 mm - Spindle speed: approx. 6,000 + 12,000 rpm - Pneumatic connection: 8 bar - Drive: 400 V / 1.5 kW - Required space: approx. W 650 x H 1550 x D 850 mm - Weight: approx. 340 kg

Condition: excellent (used), Year of construction: 2001, spindle speed (max.): 12,000 rpm, Copy router Power (kW) 1.5 Voltage (V) 400 Operating pressure (bar) 7 Milling motor speed (min-1) 12,000 Max. Workpiece cross-section W x H (mm) 200 x 100 Milling area L x W (mm) 315 x 130 Lodpfxotqytie Al Ishh Immersion depth (mm) 200 Machine dimensions L x D x H (mm) KF 347 = 1,260 x 820 x 1,650 Weight (kg) approx. 350

Year of construction: 1980, condition: good (used), Copy milling machine, copy milling machine, hand lever milling machine, hand lever milling machine -Area of application: Processing of aluminium and steel profiles -with 1 vertical and 1 horizontal milling motor -per engine: 0.74 kW 12,000 rpm Lhedpfxogfcm Ao Al Ish -Installation dimensions 2800/1100/H1630 mm -Transport dimensions 800/1200/H1630 mm -Weight: 270 kg