Used milling machines - univ.conv. 400-499mm X-axis travel for sale (70)

Condition: excellent (used), Year of construction: 1999, x-travel 400 mm y-travel 320 mm z-travel 400 mm Control HEIDENHAIN TNC 410 spindle turning speed - stepless 0 - 4000 U/min Ndodjunt Ihspfx Aqwea quill stroke 60 mm tool taper SK 40 table surface area 650 x 350 mm total power requirement 6,5 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2,5 x 1,8 x 2,0 m Electric handwheel HR 410 Probe MP 11, automatic tool measurement TT 120 Cabin, tool holders,...

Condition: used, Year of construction: 1983, functionality: fully functional, feed length X-axis: 460 mm, feed length Y-axis: 200 mm, Universal milling machine Kunzmann UF6/3 Year of manufacture: 1983 The machine is in good condition, and the spindle runs very smoothly. The feed motor has been fitted with new carbon brushes, and the Z-axis spindle has a new telescopic spring. The cam control system in 3 axes is perfect for the production of small series. --- Price net plus VAT (shown on invoice) --- Travel distances, feed/manual - Longitudinal: 450/460mm - Transverse: 190/200mm - Vertical: 400/410mm The milling head can be adjusted by approximately 100mm by hand, which increases the transverse working area. Table clamping surface (surface with 3 T-slots): 860 x 265 mm T-slots: 14mm Spindle speeds, horizontal: 30-1280 RPM Spindle speeds, vertical: 50 - 2150 RPM Feeds: 0-1000 mm/min, stepless Nsdozmfz Djpfx Aqweda Feed, vertical: 0-250mm/min Rapid traverse: 1000 mm/min Vertical milling head with fixed quill Tool holder: SK40 (Ott system) Distance, table - spindle lower edge: 440mm Accessories: - Manual - Counter support for horizontal milling - Cam control system in 3 axes (adjustable cams for switching off the feed) - Chip tray Drive power: 2.6/3.2 kW Connection: 400V three-phase Space requirement: approx. 1250 x 1200 x 1800 mm Weight: approx. 1300 kg Shipping by freight forwarder on request.

Condition: used, Year of construction: 1995, - Heidenhain position display - Infinitely variable feed in all axes - rapid traverse in all axes - Hydraulic tightening system - Rigid angular table - electric central lubrication - coolant system - workplace lighting - machine feet Nsdpfxsvhfqrs Aqwsda - year of construction 1995 Specifications Milling table: - Clamping surface: 650 x 350 mm - Clamping grooves: 5 - Slot width: 14 H7 - Groove spacing: 63 mm - Max. load: 250 kg Working range: - X-axis: 400 mm - Y-axis: 320 mm - Z-axis: 400 mm Max. Max. distances: - Top edge of table to horizontal spindle center: 140 - 540 mm - Max. table top edge to vertical head bottom edge: 430 mm Milling spindle: - Tool holder: SK40 - Vertical/horizontal speeds: 40 - 2550 rpm - Gear stages: 2 - Vertical quill stroke: 60 mm - Vertical head can be swiveled on both sides: 90 ° Feed rates: - Feed lengthwise & crosswise: 0 - 1000 mm/min - Rapid traverse lengthwise & crosswise: 4000 mm/min - Vertical feed: 0 - 1000 mm/min - Rapid traverse vertical: 3000 mm/min General data: - Drive power: 3 kW / 1410 rpm - Dimensions WxHxD: approx. 1600 x 1850 x 1350 mm - Weight: approx. 1300 kg

Condition: reconditioned (used), Year of construction: 2002, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 2002 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 344025 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 410 electronic handwheel - HEIDENHAIN KT 130 electronic 3D touch probe system for recording the workpiece position for determining workpiece reference points for measuring a finished part Ndedom Nbwtspfx Aqwoa incl. Weldon chuck SK40/Ø 16 mm - universal table 650 x 395 mm (T-slot: 14 mm) can be swiveled around 3 axes can be rotated 360° (as 4th axis digital displayed in the control) pivotable +/- 30° tilting range towards the machine 45° tilting range away from the machine 15° centering hole Ø 32 mm table load 150 kg - vertical milling head SK 40 with hydraulic tightening system DIN 69872 - central lubrication, electric - coolant system - splash guard cabin, travelling, electrically secured - operating instructions used as seen The machine is technically corresponding to the state of the year it was built.

Condition: used, Year of construction: 1965, x-travel 1000 mm y-travel 600 mm Ndodowqrw Njpfx Aqwea total power requirement 2,5 kW

Condition: excellent (used), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Tilting Table Nedslnfggopfx Aqwoda Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connection power: 8.7 kW Milling Spindle Drive Spindle speed: 21 steps Speed range: 25 – 2500 /min Step jump: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Arbor movement, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely adjustable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Torque at the motor Longitudinal + transverse: 4 Nm Vertical: 8 Nm Travel Longitudinal travel of the clamping table (X-axis): Automatic: 400 mm Transverse travel of the clamping table (Y-axis): Automatic: 400 mm Vertical travel of the clamping table (Z-axis): Automatic: 385 mm We cannot guarantee the accuracy, completeness and up-to-dateness of the information provided.

Condition: reconditioned (used), Universal Tool Milling Machine Make: harich (DECKEL) Model: B (FP 2) Aktiv Refurbished with CE certification Geometric inspection with test protocol with warranty Accessories: - 3-axis digital readout Heidenhain Positip 8016 - Fixed table or universal table - Vertical milling head SK 40 - Centralized manual lubrication - Coolant system Njdpfx Aex A T Evsqwjda - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored cover on the vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: repair required (used), Machine number: 1464 Type / Model: FUW 250/IV Travel ranges x-y-z: 400 - 220 - 400 mm Njdpfxed Hl Ste Aqwjda Table: 630 x 350 mm Table clamping area: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle connection: SK 40 Feed rate range, longitudinal: 6.3 to 1,250 mm/min Feed rate range, transverse: 6.3 to 1,250 mm/min Power consumption: 7.4 kW Accessories / Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Condition: used, Model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine -Milling machine head: pivoting/rotating -Feed: in X and Y no feed because no motors are installed (gears are available, see pictures) -Clamping table: 280 x 1300 mm -Travel: X/Y/Z 450/300/325 mm -Spindle mount: SK40 -quill stroke -quill feed: 0.04-0.16 mm/rev -Speeds from: 60 to 3000 rpm -Dimensions: 1700/1530/H2200 mm -Weight: 1362 kg Ndsdped Dt R Hofx Aqwea

Condition: reconditioned (used), Year of construction: 1999, Universal tool milling machine Make: KUNZMANN Model: WF 4/3 Year of manufacture: 1999 - partially overhauled, newly painted, RAL7035 light gray / RAL3027 raspberry red RAL7016 anthracite gray Mach. no.: 343006 with guarantee geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 path control - HEIDENHAIN HR 330 electronic handwheel - Fixed table 640 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic tightening system ISO 7388 - Central lubrication, electric - Coolant system Nedpfx Asub R R Sjqwjda - Splash guard cabin, electrically secured - Control panel on the base - Operating instructions Used as seen The machine is technically corresponding to the state of the year of manufacture.

Condition: excellent (used), Year of construction: 1986, Dear Sir or Madam, We hereby offer you well-maintained milling machines of the Deckel FP4M type. The machine will undergo a thorough technical inspection in our workshop and will therefore be fully functional. We look forward to receiving your inquiry! Delivery time: upon request Machine no.: xxxx-xxxx Year of manufacture: xxxx Table design: fixed Spindle speed: 50 - 2500 rpm Feed rate: 8 - 630 mm/min Rapid traverse: 1300 mm/min Drive power: 3.7 kW / 4.4 kW Rapid traverse: 1300 mm/min Travel distances X/Y/Z: 500/400/400 mm Tool holder: SK40 Drawbar system: M16 Vertical quill stroke: 90 mm Weight: approx. 1.6 t Further equipment and accessories: upon request Our service promise to you: Ndodslrw Tiopfx Aqwja - We are a certified master workshop in the field of mechanical engineering - All machines are thoroughly checked - All lubricants and, if applicable, worn parts are replaced beforehand - Upon request, we can completely or partially overhaul the machine of your choice - You can freely choose the paint color of the machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional accessories such as safety devices, etc. - We will gladly take care of the shipping and/or installation.

Condition: new, 3-axis digital display Fagor 40i Innova, Spindle speed: 65 - 2600 rpm Taper: ISO 40 Nodpfextu D Ijx Aqwsda Working area: 420 x 220 x 380 mm Table: 840 x 390 mm Motor: 2.2 kW Clamping surface of work table: 840 x 390 mm Rapid traverse in all 3 axes: 1000 mm/min T-slots: 5 Width x spacing: 14 x 63 mm Max. table load: 200 kg Longitudinal travel: approx. 420 mm Cross travel: approx. 220 mm Vertical travel: 380 mm Infinitely variable feed (X, Y axes): 0 - 600 mm/min Infinitely variable feed (Z axis): 0 - 600 mm/min Horizontal spindle speed range: 65 - 2600 Spindle centreline distance from column guideways: 90 - 310 mm Vertical spindle speed range: 65 - 2600 Spindle swivelling: +/- 90° Quill travel: approx. 100 mm Tool clamping: manual Spindle motor: 2 kW Vertical table: 950 x 250 mm Distance vertical milling spindle to milling table: 90 - 310 mm Distance horizontal milling spindle to milling table: 100 - 480 mm

Condition: excellent (used), x-travel 450 mm y-travel 175 mm Ndodpfx Aqovwgn Dowja z-travel 400 mm spindle turning speed range 60 - 2800 U/min tool taper ISO SK-30 weight of the machine ca. 1 t dimensions of the machine ca. 1,1 x 1 x 1,5 m Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand

Year of construction: 1968, condition: used, Cover milling machine FP1 with 3 axis digital display 380V Machine no. 37729 120-1900 rpm Travel X-axis:300 mm Travel Y-axis:150 mm Z-axis travel:340 mm Tool holder: MK 4 with tightening thread S 20 x 2 Milling head type:Vertical milling head Table type:Fixed table Table clamping surface:600 x 210 mm T-slot size:12 mm X-axis feed:290 mm Y-axis feed:150 mm Z-axis feed:330 mm Weight:700 kg Cover milling machine FP1 Njdpfjpmrpxjx Aqwsda ID: M100000409

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet Ndedpfx Aovfdatsqwsa - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: good (used), Travel X / Y / Z: 475 / 330 / 280 mm Table size W x D: 650 x 250 mm Quill stroke: 60 mm Spindle speed: 63 - 2800 rpm / 12 steps Ndodped Dgdyjfx Aqwja Mounting cone: ISO 30 / DIN 2080, ISO 40 / DIN 2080 Weight: approx. 950 kg Machine size W x D x H: approx. 1100 x 1400 x 1600 mm Spindle bore: 17.8 mm (24.8 mm) Movement range: Longitudinal travel. table: 330 mm Table: 330 mm* 1 handwheel rotation: 5 mm Vertical travel: Console: 475 mm* 1 handwheel rotation: 2 mm Transverse travel: Milling spindle carrier head: 400 mm 1 handwheel rotation: 5 mm *These two directions of movement are provided with automatic feed and can be controlled by programs. Shortest cycle time 15 seconds, or 4 program sequences per minute. Reading accuracy at the scale drums: 0.02 mm Main motor: Milling head 2 speeds Engine: 1.1/1.5 kW, 1500/3000 rpm Automatic feeds: Rapid speed motor: 0.55 kW, 1000 rpm Rapid traverse lengthwise: 2500 mm/min Rapid traverse vertical: 1000 mm/min Working feed motor: 0.2 kW max. Control range in longitudinal direction 4 - 500 mm/min Control range in vertical direction: 1.6 - 200 mm/min Coolant device: Engine: 0.15 kW, 3000 rpm Coolant pump capacity: 20 l/min Coolant tank capacity: 30 l

Condition: reconditioned (used), Year of construction: 2008, Universal tool milling machine Manufacturer: KUNZMANN Model: WF 4/3 Ndodpfx Aqohikrrewoa Year of manufacture: 2008 - partially overhauled, newly painted, RAL 7035 light gray / RAL 3027 raspberry red Machine no.: 344349 Warranty: 6 months Geometric acceptance with test report Accessories: - HEIDENHAIN TNC 124 linear control system - HEIDENHAIN HR 410 electronic handwheel - Fixed table 650 x 350 (T-slot: 14 mm) - Vertical milling head SK 40 with hydraulic clamping system DIN 69872 - Central lubrication, electric - Coolant system - Chip tray - Operating manual - used, as is -

Condition: used, Year of construction: 1985, Technical details: Ndedju Ndcmspfx Aqwsa x-travel: 485 mm y-travel: 385 mm z-travel: 380 mm control: Contour 1 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90° ° quill travel: 80 mm milling head vertical adjustable: 150 ( y-Achse) mm range of revolution per miute: Spindel vertical: 50 - 2.500 / 18 step U/min feed:: X/Y/Z: 2 - 1000 steples mm/min rapid traverse : X/Y/Z: 2000 mm/min revolution per minute: horizontal: bis 1.000 U/min Table dimensions: 460 x 800 mm table load: 0,4 t total power requirement: 9,5 kVA machine weight approx.: 1900 kg dimension machine xH: 2,35 x 2,2 x 2,0 m -Equipment: - Operation via control panel Grundig elektronic with boom - Cooling with pump - machine lighting - Linear interpolation, circular polarization in XY and XZ planes - quick chuck - manual control unit *

Condition: reconditioned (used), Universal milling machine Manufacturer: Harich (DECKEL) Ndsdpfodvdczox Aqwsa Model: B (FP 2) Overhauled and CE-certified Geometric inspection with test report Includes warranty Accessories: - 3-axis digital display FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Coolant system - Operating manual CE and safety features: - New machine electrical system with control cabinet - Electronically monitored safety cover on the vertical milling head - Tool holder guard with electrical interlock - Drive motor with braking function - Control panel with emergency stop, release, start, and stop buttons - New documentation for the machine and control cabinet - CE declaration of conformity

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 420 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 380 mm, spindle speed (max.): 2,600 rpm, spindle speed (min.): 65 rpm, quill stroke: 100 mm, total height: 1,800 mm, total width: 1,500 mm, total length: 1,200 mm, table width: 390 mm, table length: 840 mm, workpiece weight (max.): 200 kg, distance table to spindle center: 470 mm, Equipment: documentation/manual, Table surface (angle table): 390 x 840 mm Max. workpiece weight: 200 kg Travel X: 420 mm Travel Y: 220 mm Travel Z: 380 mm Nodeu Nytzepfx Aqwoda Quill stroke Z1: 100 mm Speed range: 65 - 2600 rpm Number of gear steps: 12 Drive power: 2.2 kW Tool taper: SK 40 (DIN 69871) Weight approx.: 1200 kg Including extensive standard accessories, among others: Working area enclosure with front doors 3-axis digital readout Hydraulic tool clamping for vertical spindle with SK-40 (DIN 69871) Double-monitored spindle guard 3 conventional handwheels Complete electrical equipment for 400 V, 50 Hz three-phase current Ball screw spindles for X, Y, and Z axes Vertical milling head Fixed angle table with 840 x 390 mm clamping area Swivel device for vertical milling head LED machine light Protective bellows for vertical and horizontal guideways Automatic central lubrication for axes and ball screw spindles Coolant system with pump Set (4 pcs.) mounting elements