Universal milling machine

Schaublin 22

Condition: good (used), Digital read-out With milling and drilling head Gsdpfx Asw Nnutjf Tjip Working travels 330 x 400 x 475mm Table size 650 x 245 mm Spindle taper for collets ISO 40 Spindle speeds 63-2'800 rpm Misc.accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Gisdexf Ey Ropfx Af Tep Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: not functional, Year of construction: 1971, The abbreviation LARC stands for Lighter Amphibious Resupply Cargo. This refers to the tailgate of the vehicles, which enabled the military to transport a truck or other military equipment. The XV in LARC denotes the maximum payload: 15 tons. The vehicles are made of aluminum and have the following (precise) dimensions: 13.71 m in length, 4.41 m in width, and 4.70 m in height. (American measurements: 45 ft x 15 ft x 14 ft). The original LARC vehicles were equipped with two Cummins 8-cylinder diesel engines, each delivering 300 HP. On land, the vehicles could reach a maximum speed of 48 km/h and, on water, 9.5 knots, which is approximately 18 km/h. The unladen weight of the vehicle is 22 tons. The maximum permissible weight was 35.5 tons. The previous owner intended to convert the boats to fully electric drive in order to subsequently organize tours on the Wadden Sea. Around €200,000 was invested, but the project was not completed. The diesel engines have been removed and are no longer available. Battery packs are present and partially installed. Gisdoxcgy Hopfx Af Tjp The exact remaining work required is not known.

Condition: excellent (used), Year of construction: 2008, TECHNICAL DATA Table Clamping surface: 1200 x 450 mm Longitudinal travel: 650 mm Cross travel: 510 mm Vertical travel: 475 mm T-slots: 6 x 18 H7 Maximum load: 400 kg Distances Between T-slots: 65 mm From spindle center to underside of counter-support: 160 mm Feeds Longitudinal feed: 0-4000 mm/min Cross feed: 0-4000 mm/min Vertical feed: 0-1500 mm/min Rapid traverse Longitudinal feed: 4000 mm/min Gijdpfx Ajwuurwjf Tsp Cross feed: 4000 mm/min Vertical feed: 1500 mm/min Spindle Taper: ISO40 / DIN2079 Speed range: 55-3000 Head, swiveling: 0-140 ° Quill Movement Quill diameter: 90 mm Quill stroke: Manual Feed: 75 mm Weight: approx. 2300 kg SCOPE OF DELIVERY Among others (not an exhaustive list): ABENE milling machine Heidenhain control Tool holder set Coolant pump Leveling feet Mounting block Complete operating documentation Exact scope of delivery according to photo documentation

Condition: excellent (used), Year of construction: 2001, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,600 mm, Travel paths X-axis travel: 3500 mm Y-axis travel: 2500 mm Z-axis travel: 1600 mm Worktable NC rotary table: 2200 x 1800 mm Max. table load: 12,000 kg Max. spindle speed: 2,500 rpm Gjdoyifpfopfx Af Teip Tool holder ISO-50 Accessories: - Chip conveyor

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual Giedpfx Afevfdats Tep CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: new, Universal milling machine Make: OPTimill Model: MT 50 Item no.: 3336005 Gisdpobnfxusfx Af Top Condition: New machine Travels: - X-axis 580 mm - Y-axis 200 mm - Z-axis 340 mm serially equipped with: - 3-A digital readout DPA 31 PLUS - Automatic feed in X-axis - Long milling arbor 16 mm - Mandrel long 22 mm - Drill chuck holder B 18 - Gear rim drill chuck 3-16 mm/B 18 - Reducing chuck MK 2 with drive-out slot - Reducing sleeve MK 3 with drive-out slot - Machine light - Coolant device - Operating tool - Operating instructions

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 838 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (min.): 50 rpm, quill travel distance: 127 mm, table width: 299 mm, table length: 1,245 mm, overall weight: 1,000 kg, input voltage: 400 V, warranty duration: 6 months, Rebuilt Bridgeport Milling Machine 2HP Variable Speed Fully Rebuilt Head And Machine Table has been reground on 3 Sides Bed ways have been reground and re scrapped in Brand New Lead Screws imperial X & Y & Z New Lead screw bushes imperial X, Y & Z Table Size 42” X 9” 50-4200rpm Brand New X Axis Powered Traverse Godjw Id U Hepfx Af Toip Brand New Y Axis Powered Traverse Brand New 2 Axis Digital Readout ( X & Y Axis ) Brand New Coolant Pump & System Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray Power - 3 Phase 400v (original wiring & Motor Pre CE) Comes with a techno piu machine safety guard fitted as shown in the photo which is interlocked Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new shafts, new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: new, Year of construction: 2026, Completely refurbished machine, as new, modernized to the legally prescribed "state of the art" safety standard in accordance with the safety regulations of the employers' liability insurance associations. Giedpfxeh Sptne Af Tsp Switch cabinet electronics Installation of a new CE - control cabinet according to the current legal regulations of the professional associations BGVA 3 / DIN-EN 60204-1 new machine standard. Optionally complete machine in CE execution. A CE declaration of conformity is issued for the machine. With this FPS Werkzeugmaschinen GmbH acts as manufacturer. The machine fulfills the requirements of the BETRIEBS-SICHERHEITSVERORDNUNG- Betr.SichV. The year of manufacture corresponds to the date of delivery of the machine. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 Control system 3-axis - FPS Active - digital display Speed 25 - 2500 rpm geometrically stepped direct gear with 18 speed steps for maximum torque / milling power Feed rate 5 to 500 mm/min, infinitely variable rapid traverse 1,2 m/min quill Extendable quill, vertical 100 mm SK40 with M16 tightening thread optional: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100mm Axes X/Y/Z 800/300/400 mm Table rigid angular table 1000x440mm, load 2000kg Equipment - Vertical and horizontal spindle - Milling head manually tiltable +/- 90 °. Options - Z-axis bellows - chip tray - machine light - central lubrication - universal table - rotary table - Shaper head - dividing head - counterholder - etc.

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 TECHNICAL DATA Gjdpfexflq Asx Af Tjip Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Serial Number: A04B-0102-B114#BDH Year of Manufacture: 2013 CNC Control: Fanuc Series 31i-MODEL B5 Spindle Speed: up to 24,000 rpm Travel X-Axis: 300 mm Travel Y-Axis: 300 + 100 mm Travel Z-Axis: 330 mm Rapid Traverse Rate: 54 m/min Tool Magazine: 21 positions Max. Tool Weight: 2 kg Total Tool Weight: 23 kg Max. Tool Diameter at 150–12,000 rpm: 80 mm Max. Tool Diameter at 12,000–15,000 rpm: 60 mm Max. Tool Diameter at 15,000–20,000 rpm: 45 mm Max. Tool Diameter at 20,000–24,000 rpm: 40 mm Permissible Table Load: 200 kg Machine Weight: 2,050 kg Power Supply: 200/220 V SCOPE OF DELIVERY Includes (list not exhaustive): • Fanuc Robodrill α-D21SiA5 Machining Center • 4th Axis Rotary Table • Coolant Pump and Chip Tray • Exact scope as per photo series No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.