Used milling machines - univ.conv. 400-499mm X-axis travel for sale (84)

Condition: reconditioned (used), Year of construction: 1994, operating hours: 27,545 h, functionality: fully functional, machine/vehicle number: 3701104, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 4,000 mm, feed rate X-axis: 2,000 m/min, feed rate Y-axis: 2,000 m/min, feed rate Z-axis: 1,500 m/min, spindle speed (max.): 5,000 rpm, quill stroke: 60 mm, spindle mount: MK 0, total height: 2,000 mm, total width: 2,500 mm, total length: 2,000 mm, table width: 475 mm, table length: 700 mm, type of input current: three-phase, rotational speed (min.): 5,000 rpm, table load: 300 kg, overall weight: 2,000 kg, input voltage: 380 V, workpiece weight (max.): 300 kg, space requirement length: 2,000 mm, space requirement height: 2,000 mm, input current: 25 A, Equipment: documentation/manual, rotational speed infinitely variable, Well-maintained milling machine from a training center, equipped with a HEIDENHAIN TNC 415B control system and an SK 40 milling spindle. It features a hydraulic clamping system and an automatic central lubrication system, and comes with technical documentation and an operating manual. Crodpfxs Ahfihj Aqvji

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS GENERAL Machine type: Tool milling machine Manufacturer: Kunzmann Model: WF9 Year of manufacture: 1998 Control system: Heidenhain WORKING AREA Travel in X-axis: approx. 800 mm Travel in Y-axis: 500 mm Travel in Z-axis: 500 mm WORK TABLE Table dimensions: 1,200 × 600 mm Number of T-slots: 9 SPINDLE Tool holder: SK40 ELECTRICAL DATA Operating voltage: 400 V Frequency: 50 Hz Rated current: 25 A MACHINE DETAILS Crodpfx Aqj Ad Dqcsvei DIMENSIONS AND WEIGHT Length: 2,500 mm Width: 1,500 mm Height: 2,000 mm Weight: 3,000 kg EQUIPMENT Heidenhain control system

Condition: used, Universal tool and cutter grinding machine DECKEL, Type FP 3 Serial No. 2201 - 5240, Year of manufacture 1981 Control system Type 2201, Serial No. 5594 Travel distances: X: 500 mm, Y: 300 mm, Z: 380 mm (manual adjustment and without bellows) Travel distances: X: 490 mm, Y: 290 mm, Z: 340 mm (with feed) Table size: 800 x 420 mm Crsde Ahzl Djpfx Aqvoi Spindle mount: SK 40 - S20x2 Tailstock travel: 100 mm Spindle speed: 25 - 2500 rpm, 18 steps Feed rate: Feed 5 to 500 mm/min. Rapid traverse speed: approx. 1200 mm/min. Motor power, spindle drive: 2/4 kW, pole-switching Power connection: 380 Volt, 50 Hz - Active digital display for 3 axes, HEIDENHAIN Type TNC 111 - Stepless feed in the X, Y and Z axes - Mechanical handwheels for all three axes - Spindle speed via 2 motor speeds and 18 gear stages - Vertical milling head, swiveling and extendable 200 mm horizontally - Fixed angular table 800 x 420 mm - Coolant system with mechanical pump in the machine base - Central lubrication - Control cabinet located beside the machine - Protective enclosure with hinged doors around the machine table - Original chip tray for attachment to the machine base Space requirement L x W x H: 1600 x 1600 x 1750 mm Weight: 1400 kg Good condition

Condition: used, Year of construction: 1976, functionality: fully functional, Used Weyrauch milling machine, model FR-BM 515, manufactured in 1976. Crjdpfx Aj Ah Rntoqvsi Travel distances: According to the scale: X = 1330 mm Y = 1030 mm Z = approx. 400 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, Universal milling machine WAGNER FCA 400 & 3-axis digital from a testing workshop - Year of manufacture 2008 - CE marking - 3-axis digital display - Travel ranges X/Y/Z 450x400x400mm - Fixed angular table 740x320mm - Automatic feed rates in all three axes - Rapid traverse - Speed range 40 - 2000 rpm - Tool holder ISO 40 Codpjz St Hqjfx Aqvori - Vertical milling head with drilling quill - Safety handwheels - Coolant system - Horizontal counter bearing - Work light - Machine feet Dimensions: L x W x H 1.4 x 1.2 x 1.9 meters / Weight 1800 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 124 control – in very good condition. CE compliant! Technical data: >> Year of manufacture 2000, machine no. 343017 >> Fixed angular table >> Speed: continuously variable up to 4000 rpm >> Feed rate: continuously variable in 3 axes from 0 to 2000 mm/min >> Travel distances X/Y/Z: 400/320/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg Codez E R Ahspfx Aqvjri >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 13 KVA Accessories and equipment: >> Heidenhain TNC 124 control >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control, and programming examples >> Handwheels >> Coolant system >> Electronic handwheel Heidenhain >> Heidenhain probe About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 124 control. This universal milling machine is in very good, original condition. It comes from a company where it was used primarily for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for both vertical and horizontal operation. The conversion from vertical to horizontal is very simple by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: excellent (used), Year of construction: 2002, Used CNC tool milling machine Codpjxz Rkyjfx Aqvori Year of manufacture: 2002 Control manufacturer: Heidenhain Control type: TNC 426 Working area: X: 400 mm Y: 350 mm Z: 400 mm Clamping surface: 650 x 350 mm (fixed table) Milling spindle tool holder: SK40 Spindle speed range: 5 – 5000 rpm Feed rate: 0–2 m/min Tool changer: none Accessories: Standard, chip tray, handwheel & documentation including declaration of conformity and data backup

Condition: excellent (used), Year of construction: 2014, Kunzmann WF 600 M Tool Milling Machine Kunzmann WF 600 M with Heidenhain TNC 124 Control Year of manufacture 2014 Excellent CONDITION CE-compliant!! Technical Data: Year of manufacture: 2014 Fixed angle table Crsdpfx Ajy Sihzsqvei Spindle speed: continuously variable up to 4000 rpm Feeds: stepless in 3 axes from 0 to 2000 mm/min Travel X/Y/Z: 600/400/400 mm Rapid traverse x/y/z: 5 / 5 / 4 m/min Table size: 650 x 350 mm Table load: 250 kg Vertical quill travel: 60 mm Vertical and horizontal spindle, SK40 Hydraulic clamping system Weight approx. 1700 kg Space requirement approx.: 2.3 x 2 x 2 m Drive power: 12 KVA Accessories and Equipment: Heidenhain TNC 124 control Hydraulic clamping vertical and horizontal Automatic central lubrication Spindle brake Technical documentation, spare parts diagrams, operating manual for the control and programming examples Handwheels, coolant unit, tool holders, vise About the Machine: Offered here is a Kunzmann WF 600 M tool milling machine equipped with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a facility where it was only lightly used for training purposes. The control is very easy to operate. Furthermore, the machine features hydraulic clamping both vertically and horizontally. Converting from vertical to horizontal is straightforward, simply by swinging away the vertical head. The guides are reliably lubricated via central lubrication. The Kunzmann has been mechanically and electrically tested at our facility. Take the opportunity to inspect and test the Kunzmann under power at our premises. You can find more milling machines from renowned manufacturers on our website.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Internal article number: 26082 Universal milling machine Deckel FP4M Overhauled by FPS in 2021 + Hydraulic machine vice, Röhm 135 + Machine lamp / protective cover + Operating manual Dimensions (L x W x H): 140 x 210 x 200 cm Weight: approx. 1500 kg Crsdpfezxgy Sjx Aqvji The machine comes from a training workshop and is in very good condition.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis digital display Heidenhain in special light gray paint!!! Technical data: >> Year of manufacture 1986, machine no. 2203-2308 >> Fixed angular table Csdpfx Aqezv Sdqjvjri >> Speed: 50 - 2500 RPM >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse rate: 1300 mm/min >> Travels X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle head, adjustable by 150 mm >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable by 90 mm >> Clamping system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3-axis digital display Heidenhain >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine in very good condition. The machine has little backlash and all spindles can be moved easily and smoothly. Even at maximum speeds, the milling machine runs smoothly. Rapid traverse in all axes. A reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically inspected. The Heidenhain digital display makes the work easier and even more precise. Take advantage of the opportunity to inspect and test the machine on site while it is powered up. CE marking available for an additional charge.

Condition: good (used), Year of construction: 1990, Ref. -No.: 10544 Manufacturer: DECKEL Type: KF 2 Year of construction: 1990 Type of control: N/A Control: N/A Storage location: Halberstadt Country of origin: Germany Power Capacity: 1,6 / 2,0 kW Tool Taper: 20 mm Ø Space requirements: 1600 x 1350 LxWxH (mm) Feed rate: 0-350 mm / min Vertical portal passage, clamping table - lower beam cross member: 300 mm Distance table - spindle nose with vertical milling spindle: 50 mm Distance table - spindle nose with horizontal milling spindle: 450 mm Machine Height: 1950 mm Weight: 2,1 t Pre-milling spindle: 80...1000 min-1 Crsdpfx As Ahmu Esqvji Collets: 20 O taper bushing: Morse 1 Touch lift: 12 O Speed of the milling motor: 1400 RPM Further information: - Optical testing device - Pre-milling spindle - Model milling device - Rotary table - Inclined spindle - Mirror image milling device - Reduction and enlargement device - Roller engraving devices - Machine vice hydraulic clamps - Auxiliary clamping table - Dividing head - Tool cabinet - Clamping claws - template bars - articulated light The machine can be viewed under power by arrangement.

Condition: excellent (used), functionality: fully functional, Measuring machine based on Zoller V520, including a fixture for pre-setting and measuring the grippers of the DMP60VLinear tool changer. It features 2 linear axes and 2 rotary axes and is supplied complete with a PC and Zoller Multivision II. The digital display for the two rotary axes is not included in the scope of supply and can be purchased separately. Csdpfxozvdbbo Aqvsri

Condition: like new (used), Year of construction: 2022, functionality: fully functional, Universal milling machine DMG FP4M Special Edition With 3-axis digital display ND7013 by Heidenhain, in new condition, Made in Germany, CE compliant!!! Technical data: >> Year of construction 2022 >> Fixed angular table, clamping area 480x800 mm >> Spindle drive, speed range 25-3000 rpm, stepless adjustment with input on the control panel >> Controlled main drive 6 kW >> Vertical milling head, swiveling +- 90 degrees (180 degrees) >> Linear axes, feed range 6-500 mm/min >> Rapid traverse 1500 mm/min >> Space requirement (W+D) approx. 2.2 x 1.9 meters >> Weight approx. 1600 kg Accessories and equipment: >> Heidenhain digital display ND 7013 >> Coolant system >> Minimum quantity lubrication >> Central lubrication >> Machine feet >> Operating manual, etc. About the machine: Offered is a universal milling machine DMG FP4M Special Edition with a 3-axis digital display by Heidenhain ND 7013, in new condition. A reliable and user-friendly machine, Made in Germany. An oil change has been performed. Mechanically and electrically inspected. Take the opportunity to inspect and test the Deckel machine on-site while it is powered on. Codpfxezung Ee Aqveri

Condition: not inspected (used), travel distance X-axis: 400 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, Universal Tool Room Milling Machine Manufacturer: DECKEL Model: FP3NC Control System: Dialog 4 Technical Specifications: - X-axis travel: 400 mm - Y-axis travel: 315 mm - Z-axis travel: 400 mm - Spindle speed: 3,150 rpm Condition: used, untested In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and work-holding devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale. Cjdpfx Aqozz S Rnovjri

Condition: like new (used), Kunzmann WF 7/3 Tool milling machine Kunzmann WF7/3 with Heidenhain TNC 124 control, manufactured in 1997, in good CONDITION. CE compliant!! The machine comes from the vocational school of the HWK Augsburg and, according to the master craftsman, has approximately 300 operating hours. Technical data: Year of manufacture: 1997 Fixed angular table Clamping slots: 6 Slot width: 14 H 7 Slot spacing: 63 mm Maximum load: 300 kg Spindle speeds S I: 1 – 1125 min-1 Spindle speeds S II: 1126 – 4500 min-1 Feed rate (potentiometer 100%): longitudinal and transverse 0 – 2000 mm/min. Rapid traverse: longitudinal and transverse 5000 mm/min. Feed rate: vertical 0 – 2000 mm/min. Rapid traverse: vertical 4000 mm/min. Travel distances X/Y/Z: 600/400/400 mm Vertical and horizontal quill - SK40 Hydraulic clamping system Weight: approx. 2000 kg Dimensions: approx. 2 x 2 x 2 m Main drive motor: 7.5 kW Accessories and equipment: Heidenhain TNC 124 control Hydraulic chuck, vertical and horizontal Automatic central lubrication Spindle brake Csdpfezy Uh Tjx Aqvori Technical documentation, spare parts diagrams, operating manual for the control unit and programming examples Handwheels Coolant system About the machine: Offered is a tool milling machine Kunzmann WF7/3 with a Heidenhain TNC 124 control. This universal milling machine is in very good original condition. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping both vertically and horizontally. Switching from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site under power. You can find more milling machines from well-known manufacturers on our website.

Condition: good (used), – 140–2500 RPM Codpfjzwwq Eex Aqvjri – Infinitely adjustable speed – Table 740 × 220 mm – Automatic feed – Rapid traverse – Heidenhain digital display – Swiveling milling head – Safety device – Emergency stop – Tool – Lighting – 400V

Condition: ready for operation (used), functionality: fully functional, DECKEL FP 2 E milling machine from an educational institution -Travel ranges X / Y / Z 400x200x400mm -Automatic feeds / rapid traverses in the X & Z axis -Spindle speed range 40 - 2000 rpm -Tool holder ISO 40 -Vertical / horizontal milling capability -Swiveling vertical head with drilling quill -Fixed angular table -Machine with sliding head / extended Y-axis travel Crsdpfxszx Rk Is Aqvji -New control cabinet -Coolant system -Chip tray -Documentation -Optional / Three-axis digital display Dimensions: L x W x H 1.5 x 1.5 x 1.8 meters / Weight 1500 kg Errors and omissions excepted.

Condition: good (used), Year of construction: 1984, functionality: fully functional, Travel range X: 500 mm Travel range Y: 400 mm Credjzi Uy Uopfx Aqvji Travel range Z: 400 mm Spindle speed: 31.5 – 2000 rpm Tool holder: SK 40 with S20x2 draw-in thread Table type: Fixed table Table clamping surface: 700 x 330 mm Weight: 1600 kg Dimensions: approx. 1700 x 1300 x 1900 mm Paint finish: RAL 6011 Reseda green Digital display: 3-axis HEIDENHAIN Accessories: Central lubrication, coolant tank, other accessories available upon request.

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Credps Adz Tzjfx Aqvei TECHNICAL DETAILS Manufacturer: Deckel Type: FP3NC Year of manufacture: 1984 Condition: Defective MACHINE DETAILS Dimensions (L × W × H): 200 × 1,500 × 2,000 mm Weight: 1,000 kg

Condition: like new (used), Year of construction: 2015, functionality: fully functional, Tool milling machine Kunzmann WF 400MA with Heidenhain 3-axis active digital display. Like-new condition. CE compliant! Technical data: >> Year of manufacture 2015, Machine no. 410749 >> Milling table clamping surface 600 x 375 mm >> 5 clamping slots >> Slot width 14 H7 >> Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed rate up to 5 m/min >> Travel distances X/Y/Z: 410/350/450 mm >> Vertical and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor (100%/25% ED) 8.5/16.2 kW Accessories and equipment: >> Heidenhain 3-axis active digital display >> Hydraulic chuck, vertical and horizontal Cedpfeztwy Esx Aqvjri >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the machine: Offered is a Kunzmann WF 400MA tool milling machine with a 3-axis active digital display from Heidenhain. It proves its qualities daily in workshops, production facilities, and training centers. This universal milling machine is in like-new condition. Furthermore, the machine has hydraulic chucks for both vertical and horizontal operation. Converting from vertical to horizontal operation is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up.

Condition: used, machine/vehicle number: 55191-08, equipped with a 2-axis digital display, manufactured by HEIDENHAIN, with an angular milling head, 2 indexing tables, an additional clamping table, counter support, 3-jaw chuck, various change gears, machine light, and a steel transport cart. Cedez Nhndopfx Aqvsri

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Tool milling machine Kunzmann WF 400MA with Heidenhain 3-axis active digital display – in like-new condition, CE-compliant!! Technical data: >> Year of manufacture 2016, machine number 410737 >> Milling table, clamping surface 600 x 375 mm >> 5 T-slots >> Slot width 14 H7 >> Maximum load 250 kg >> Speed range 1-4500 rpm >> Feed rate up to 5 m/min Crodpsztw I Aofx Aqvoi >> Travel distances X/Y/Z: 410/350/450 mm >> Vertical and horizontal quill – SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Dimensions approx.: 2 x 2 x 2 m >> Main drive motor (100%/25% duty cycle) 8.5/16.2 kW Accessories and equipment: >> Heidenhain 3-axis active digital display >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual >> Coolant system About the machine: Offered for sale is a Kunzmann WF 400MA tool milling machine with a 3-axis active digital display from Heidenhain. It proves its qualities daily in workshops, production facilities, and training centers. This universal milling machine is in like-new condition. Furthermore, the machine has hydraulic clamping in both the vertical and horizontal positions. Converting from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site while it is powered up.

Condition: used, For sale is a used Aciera F4 precision milling machine from Switzerland. Latest generation. Excellent condition. Travels: X400 Y175 Z450mm Tool holder: ISO 40 Spindle speeds: 50-3400 rpm, stepless Universal milling table Feeds on X and Z axes: 10-600mm/min stepless Rapid traverse on X and Z axes: 1500mm/min Cedpfx Aqey H Iupsvjri Extremely robust and precise toolroom milling machine. Includes several SK40 tools as well as a collet chuck with collet set. Original operating manual included. Weight approx. 950kg.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE-compliant, from a training workshop! Technical data: >> Year of manufacture 2008, machine no. 347139 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Quill stroke vertical: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m Crsdpfoz Eh Tqsx Aqvoi >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic clamping, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic clamping in both vertical and horizontal positions. Changing from vertical to horizontal is very easy by folding down the vertical head. The guides are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on site while it is powered up. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Tool milling machine Kunzmann WF4/3 with Heidenhain TNC 320 control system, in very good condition, CE compliant, from a training workshop! Technical data: >> Year of manufacture 2008, Machine No. 347142 >> Fixed angular table >> Speed: continuously variable up to 4500 rpm >> Feed rate continuously variable in 3 axes from 0 to 2000 mm/min >> Rapid traverse X and Y axis 5000 mm/min Crsdpsz Eh T Dofx Aqvei >> Z axis 4000 mm/min >> Travel distances X/Y/Z: 400/350/400 mm >> Table surface: 650 x 350 mm >> Table load: 250 kg >> Vertical quill stroke: 60 mm >> Vertical quill and horizontal quill - SK40 >> Hydraulic clamping system >> Weight approx. 1800 kg >> Space requirement approx.: 2.3 x 2 x 2 m >> Drive power: 15 KVA Accessories and equipment: >> Heidenhain TNC 320 control system >> Hydraulic chuck, vertical and horizontal >> Automatic central lubrication >> Spindle brake >> Technical documentation, spare parts diagrams, operating manual for the control system and programming examples >> Handwheels >> Coolant system (not shown in the pictures) About the machine: Offered for sale is a Kunzmann WF4/3 tool milling machine with a Heidenhain TNC 320 control system. This universal milling machine is in very good condition and has only a few operating hours. It comes from a company where it was only used for training purposes. It has a very easy-to-use control system. Furthermore, the machine has hydraulic chucks for vertical and horizontal operation. Changing from vertical to horizontal operation is very easy by folding down the vertical head. The guideways are regularly lubricated by the central lubrication system. The Kunzmann has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Kunzmann on-site with power connected. There are 5 identical Kunzmann WF4/3 milling machines available from a vocational school. The machines are available immediately.