Used multi blade saws for sale (204)

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Nedpfsmk E D Isx Amnelb Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: excellent (used), Meren Jonson Multi-Saw with Automation Powered roller infeed with centering Roller outfeed with side pusher Rubber crawler feed system Press rollers under the shaft for cutting short pieces Smooth feed speed adjustment Maximum cutting height: 100 mm Supported saw shaft Nljdsxm Sd Eopfx Amneb Main motor: 75 HP (56 kW)

Condition: excellent (used), chain width 320mm Nsdpfx Aow A H Dhomnslb cutting height 120mm max blades diameter 350mm shaft diameter 70mm shaft speed 3700 RPM two feeding speed iron cast body motor power 37kW weight 2200kgs

Condition: excellent (used), Outfeed table for multirip saw witich floating blade Raimann DTF Nsdpfxow A H Dus Amnolb

Condition: excellent (used), chain width 320m cutting height 120mm Motor power: 30 kW Nledow A H Akspfx Amneb max blade diameter 350mm shaft speed 3700 RPM shaft diameter 70mm variable regulated feeder 4-24m/min iron cast body

Condition: ready for operation (used), Year of construction: 2005, chain width 340mm max cutting height 120mm variable adjustment of feeder 5-35m/min 2 lasers year 2005 Nodow A H Dnepfx Amnjlb motor power 37kW weight 2200kg

Condition: good (used), chain width 200mm motor power 18,5kW max material heigth 120mm Refurbished track variable regulated feeder manual regulation of pressure rolls Nodpfx Amow A H Awonelb manual regulation of shaft max blade diameter 350mm

Condition: excellent (used), Year of construction: 2021, MC 1100 multi-blade saw from 2021, practically unused, purchased as a backup. It can cut 2200 x 2800 mm panels twice in a row without losses. The machine features 4 motors, 3 idle pressure rollers, and a saw spindle for blades with a diameter of Ø200-Ø250 mm. It boasts a robust, compact design. The main control panel at the front is equipped with a smooth feed speed regulator, allowing precise adjustment to any material for optimal finishing quality. Pawls and top rollers minimize kickback risk, ensuring maximum operator safety. The one-sided open frame provides unlimited capability for cutting extra-wide, oversized elements without the need for additional devices. Includes 3 automatic transport rollers and rubber rollers between saw blades to reduce vibration of MDF panels and wood during processing. Nedpfx Aowyqvvsmnslb TECHNICAL DATA: Cutting width: 1100 mm Maximum cutting height: 50 mm Minimum panel length: 650 mm Feed speed: 5-20 mt/min Feed motor: 0.75 kW, 1410 RPM Maximum power consumption: 22 kW, 380V Power: 30 HP Maximum blade diameter: 250 mm Saw shaft diameter: 70 mm Saw speed: 3500 RPM Maximum number of saw blades: 15 Working height: 900 mm Noise level: 80 dB Pressure: 8 Bar Dimensions (W/L/H): 1640x1495x1400 mm Weight: 1590 kg Infeed and outfeed table: Yes

Condition: excellent (used), MRS 350 multi-saw - feed band width 35cm - max. cutting height 13cm - main engine 37kW Njdpfjp Audxsx Amnslb - smooth adjustment of feed speed - max. saw size 400mm

Condition: excellent (used), Multisaw scm m3 Nledpji Ewnasfx Amnjb - track width 300 mm - cutting height 120 mm - engine power 37 kW - weight 1800 kg - year 2003 - max. element width 100 cm - min. element length 40 cm - smooth adjustment of feed speed - three rows of anti-kickback pawls - spindle diameter 50 mm - sleeve diameter 70 mm - sleeve equipped with spacers and 5 saw blades 350 mm - blade diameter from 200 to 350 mm - automatic central lubrication - four upper pressure rollers – a set of keys Machine and tape in very nice condition.

Condition: excellent (used), Main motor 25 kW Nlodpfoqwg Iaox Amneb

Condition: new, Year of construction: 2026, I am selling this industrial heavy-duty rip saw RS-ES-800 KUSING. The machine is in stock in Kežmarok (Slovakia). It is an industrial heavy-duty rip saw intended for processing soft and hard lumber of larger cross-sections with multiple blades. Technical parameters • Number of blades: up to 15pcs (+ 3pcs on the movable unit) • Motor power: 37 kW (standard), adjustable according to requirements • Machine weight: 3 500 kg • Pressure roller lift: Electric, controlled from external panel • Blade positioning: Electric, via computer • Number of feed rollers: 6 + 3 (upper and lower) • Front traction roller: Positioned in front of the wedges for rapid ripping • Extraction system: Upper and lower dust extraction for maximum cleanliness • Material width: 800 mm Multi-blade solution: - Possibility to install up to 15 blades + 3 movable blades. - Movable unit with a separate space for 3 blades, each 110 mm in length. Power: Nodpfx Asx Uty Tomnelb - Standard motor 37 kW (adjustable according to customer requirements). - Feed motor power 1.5 kW. Material feed: - A total of 9 feed rollers (6 + 3) ensures even advance and prevents torsion of the lumber during cutting. - Front traction roller placed in front of the wedges minimizes kickback and significantly facilitates feeding of boards or tall timbers. Electric control: - The lift of the pressure rollers and blade positioning are performed electronically via an external control panel, which increases the speed of setup during line ripping. Perfect dust extraction: - Integrated extraction systems in both upper and lower parts of the machine ensure maximum cleanliness of the workspace. Easy maintenance: - Special construction allows the top cover to be folded up, so maintenance and cleaning of the machine are quick and hassle-free. The specialty of this machine is the front traction roller, which is placed in front of the wedges against kickback—this speeds up feeding boards into the machine and especially helps when feeding tall timbers, as it is not necessary to overcome the resistance of the wedges and the machine pulls the material in by itself. Thanks to the three traction rollers, it is ensured that the material does not tend to twist during the cutting process, thereby increasing the quality of the cut. The machine has excellent dust extraction from both the upper and lower parts, which ensures maximum cleanliness of the machine. The machine is specially constructed to be as easy as possible to maintain and clean. The top cover folds open and allows the operator to easily clean the machine.

Condition: new, Year of construction: 2026, I am selling a KUSING RP-OP-600 PRO rip saw. Nledpfx Amjx Utyyenjb This is a top-of-the-line rip saw with one or two simultaneously digitally adjustable saw blades. The control has a memory with 5 values for faster and more precise work on the machine. The machine has both upper and lower traction using six steel traction rollers to ensure maximum traction even when processing thicker materials and prisms up to a maximum height of 105 to 130mm. The machine can be equipped with any number of blades with a clamping system using sliding housings for quick change of dimensions. Technical parameters: Input width: 700 (up to 900mm) Feeding roller length: 600mm Number of pulling rollers: 6x Maximum cutting size: 550mm (700mm) Main motor power: 11 / 15 / 18 kW Max. Disc diameter: 350mm Maximum cutting height: 105 mm (130 mm) Shaft diameter: 50mm Shaft length: 600mm The machine meets all safety requirements for CE standards. The machine is made in Slovakia. Possibility of configuring the machine according to requirements, whether it is the number of lasers, selection of input and output roller paths, etc.

Condition: new, Year of construction: 2026, I am selling this excellent helper in a carpentry workshop or a smaller sawmill for preparing plastered lumber and producing boards. This is a double-blade edge saw / Rip saw KUSING OP-400 ECO. Motor power: 2x 4kW Maximum cutting height: 55mm Feed speed: 4-18 m/min Maximum material width: 600mm Maximum width between blades: 400mm The machine's primary purpose is as a complementary machine to smaller band saws. Nedpex Utv Iefx Amnolb The machine rapidly speeds up the process of producing boards, saving time in their production. With a special option, it is possible to adjust and extend individual shafts by 55 to 105mm, thanks to which you can place up to 4 blades in the machine at once. Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. KUSING OP-400 ECO Double-Blade Rip Saw Are you looking to speed up board production in your carpentry workshop or smaller sawmill? The KUSING OP-400 ECO is the perfect partner for preparing planed lumber and turning logs into boards quickly and efficiently. _____ Why Choose the OP-400 ECO? • High Productivity: Dual 4 kW motors ensure consistent cutting power, allowing you to process lumber faster than with a single-blade setup. • Versatile Cutting Capacity: o Max. Cutting Height: 55 mm o Max. Material Width: 600 mm o Max. Distance Between Blades: 400 mm • Efficient Feed System: Adjustable feed speed from 4 to 18 m/min gives you precise control over material flow for different wood densities and board thicknesses. • Expandable Blade Configuration: With the optional shaft-extension kit, you can extend each shaft from 55 mm up to 105 mm, accommodating up to four saw blades simultaneously. This means you can rip multiple boards in a single pass, dramatically reducing setup times. • Ideal Secondary Machine: Designed as a complement to smaller bandsaws—speed up your workflow by rough-cutting logs into boards before final dimensioning. Technical Specifications • Motors: 2 × 4 kW • Maximum Cutting Height: 55 mm • Feed Speed Range: 4 – 18 m/min • Maximum Material Width: 600 mm • Max. Blade Gap (between blades): 400 mm • Shaft Extension (optional): 55 – 105 mm (fits up to four blades) The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: like new (used), I sell the multirip saw of italian production SCM M3. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 300mm. Njdpfx Asvll Ekomnelb Open design / possibility to insert wider workpieces Motor approx. 20KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator. Total weight approx. 2500kg. Blades and adjusting rings included. Feeding band very good condition. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: good (used), Year of construction: 2012, I sell the automatic pneumatic end cutting saw KuangYung PX60 CFS 200B, year 2012. Motor power 7,5kW Input table automatic feeding 5,10m (throughfeed system) Outut table 9,20m 5 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Nsdpsppwx Ejfx Amnjlb Available immediately. CE version. Documentation included.

Condition: good (used), Year of construction: 2016, I sell the multirip saw of slovenian production MEBOR VR900. Cutting height under the blade 160mm / possibility of adjustment Width of cut on the feed wheel max. 900mm. 1 pc. moving head with laser adjustment. Diameter of main saw blade 300 - 500mm. Motor 55 KW. Total weight approx. 4000kg. Blades and adjusting rings included. Njdpfx Amjxxgy Ssnjlb The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: ready for operation (used), 1 pc SCM CNC machine 1 pc SCM panel saw 1 pc SCM CY7LEX CNC machine Nlodpfsx Hwgbjx Amnob 1 pc SCM edge banding machine 1 pc SCM edge banding machine

Condition: used, Year of construction: 2014, functionality: fully functional, For sell a TOS Svitavy PWR 412 double-shaft multiblade saw with automatic vacum feeder and centering, manufactured in 2014. Includes: - PWR 412 multiblade saw - scissor table - roller infeed with automatic feeder and centering device - roller outfeed table - sawdust conveyor - control panels and control cabinet - several sets of saw blades - 112 used and 20 new Main machine points of specification: Saw shaft electric motor power: 2 x 90 kW Maximum blade diameter: 350 mm Maximum material height: 200 mm Maximum distance between horizontal blades: 400 mm Feeder speed: adjustable from 4 to 40 m/min Pneumatic and spring-loaded pressure mechanism Laser-guided sawn timber Saw shaft speed: 3800 rpm All technical parameters given in the last photos Very good condition, the machine has not been used from 2 years. It is connected to the power supply at the time of listing. Nlodpfx Amsx Hfvqsneb Price net, VAT invoice included. Disassembly and transport are the responsibility of the buyer.

Condition: used, Multisaw Length: 270 cm Nodpfxjxygbrj Amnjlb Width: 150 cm Height: 160 cm Motor power: 22 kW

Condition: used, Edger saw with output conveyor Manufacturer: Larmet Year: 2014 Edge banding machine: Length: 193 cm Width: 85 cm Height: 220 cm Motor power: 18.5 kW Board separating conveyor: Length: 615 cm Width: 68 cm Height: 190 cm Roll length: 40 cm Nlsdpfxjxyh U Hj Amnob Motor power: 1.5 kW

Condition: used, A.COSTA LEOPARD multirip saw with double arbor - Max cutting depth: 200 mm - Width of track: 350 mm Njdpfxovf Dago Amnslb - 2 x 55 KW / 75 HP - Weight: around 5 tons

Condition: used, Year of construction: 1994, Double spindle multi rip saw - Manufacturer: A.Costa - Model: Jaguar Nlodetqld Uepfx Amnjb - Max cutting height: 200 mm

Condition: used, Multi-saw Manufacturer: Standart Hjo Nedpfx Amoxf Hm Esnslb Model: SM 80 Length: 1.55 m Width: 1.15 m Height 1.25 m

Condition: used, Multisaw Nsdpfxoxf E E Ts Amnjlb Length: 1.00 m Width: 1.65m Height 1.30m