Used manipulators for sale (41)

Condition: ready for operation (used), Year of construction: 2018, A Nutek PCB turning station with pneumatic lifting and turning mechanism for the semiconductor industry is available. Transfer height: 950mm, transfer height adjustment: +/-25mm, belt speed range: 2m-14m/min, PCB edge support: 3mm, component clearance (bypass mode) top/bottom: 30mm/30mm, PCB length range: 80mm-460mm, PCB width range: 75mm-460mm, machine dimensions X/Y/Z: approx. 1000mm/900mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Hfodpfx Ajwhfnpeayer

Condition: like new (used), Year of construction: 2022, operating hours: 5 h, functionality: fully functional, machine/vehicle number: 2260081, load capacity: 400 kg, Hello, I have this fully pneumatic DELMEC remote arm, which can lift and move up to 400 kg with one hand. Hfedpfx Aowcpl Uoayjr The machine has been used very little; it's a showroom model. The machine is complete and in perfect working order. It can be sold as is, delivered, and even installed (to be determined together).

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DS550 CA, overall weight: 50 kg, load capacity: 400 kg, VACUUM LIFTER PANEL SYSTEM DS550 CA Hfsdpjwutibsfx Aayjr Compact vacuum device for sandwich panels, ideal for wall installation. Its construction allows it to fit even in the trunk of a passenger car. The lifter is additionally equipped with a rotator, enabling 360° rotation of the panel. Available with radio control, manual operation, and a single-circuit version. Weight of the device: 50 kg Lifting capacity: 400 kg Control - radio/manual Power supply - external battery (DeWalt - one included, with charger) Battery charge indicator: Yes Mounting position: vertical/horizontal Vertical wall mounting: Yes Number of suction pads: 1 Material length: 1-8 m

Condition: excellent (used), Year of construction: 2005, Industrial manipulators (2 units) Mounting: ceiling-mounted Hsdpfx Aewvi Upjayjfr Ceiling guide length: approx. 15 meters Number of axes: 4 Load capacity: Manipulator 1: 30 kg Manipulator 2: 35 kg Gripper: pneumatic part gripper (for each manipulator) Year of manufacture: 2005

Condition: as good as new (ex-display), Year of construction: 2022, Alfa Star pickers available in 3 versions: P 450V, P 650V, P 850WV Available immediately from stock in Poland Year of production - 2022 P450V Injection molding machine short-circuit force range -30-60 tons - €1799 Vertical stroke [mm] -450 Transverse stroke [mm] -120 Rotation angle [°] -60-90 Pickup time [s] -1.3 Max. load capacity [kg[ -2 Dry cycle time [s] -4.0 Air consumption (NI/cycle) -11 P650V Injection molding machine short-circuit force range -50-160 tons -1985 euro Vertical stroke [mm] -650 Transverse stroke [mm] -120 Rotation angle [°] -60-90 Pickup time [s] -1.7 Max. lifting capacity [kg] -2 Dry cycle time [s]-4.5 Air consumption (NI/cycle) -14 P850WV Hfsdpfx Aeqwyi Djaysr Injection molding machine short-circuit force range-160-300 tons -2495 euros Vertical stroke [mm]-850 Transverse stroke [mm] -200 Rotation angle [°] -60-90 Pickup time [s] -1.9 Max. load capacity [kg] -2 Dry cycle time [s] -5.8 Air consumption (NI/cycle) -14 More than 30 units available off-the-shelf, all with CE. We have access to spare parts and service. Offer for users and distributors

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Hedpfx Ajurlcreayefr Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Condition: ready for operation (used), Year of construction: 2000, A total of three conveyor belts (transport modules) are available for the PCB industry. 1) Three-segment conveyor belt with buffer module Asys FPS 30, year of manufacture: 1996. 2) Transport module Rommel SM 600 T. 3) Transport module Rommel BM 500 S, year of manufacture: 2000. Documentation available. On-site inspection is possible. Hodswzlfuspfx Aayefr

Year of construction: 2020, condition: new, Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipment.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Hfodpsfy T Arsfx Aayor Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished.Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder.The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off.Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators.The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off.

Condition: excellent (used), Year of construction: 2019, 2-axis positioner - BEAR RT series Hfedpfx Aomu Agpoaysr Robot - Kawasaki BA006L from the year 2019 Power source - Fronius TPS 400i from the year 2019 Robot and positioner in very good technical and visual condition - as shown in the photos. In continuous operation.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,619 h, functionality: fully functional, machine/vehicle number: PEC 50 2158273, total height: 3,000 mm, total width: 1,000 mm, total length: 1,000 mm, type of input current: three-phase, input voltage: 400 V, Arm-mounted manipulator with a gripper for cylindrical parts. Hodpfx Aow Hwq Teayjfr

Condition: like new (used), Smart robot operation in harsh industrial environments Hfjdow Rl Tvjpfx Aayer Our teach pendants set your robot in motion and open up almost unlimited application options. With their intuitive operator control, they allow even complex tasks to be solved quickly and precisely – without programming knowledge. They also guarantee safe control in demanding environments. The application options are clearly displayed on the display of the KUKA teach pendant as well as on your own device, so that you can get started directly as an operator. Used for KRC4 controller.

Condition: ready for operation (used), Year of construction: 2008, A stacker and destacker cutter for the PCB industry is available. 1) Stacker for slotted cassettes Kuttler SUE 50, year of construction: 2008, running direction: right-left, operating hours (plate counter): 2.8 million, weight: approx. 800 kg. 2) Single stacker for slotted cassettes Kuttler RLE 160, year of manufacture: 2004, with conveyor belt CO 800, year of manufacture: 2008, running direction: right-left, operating hours (plate counter): 5.4 million. The system is missing cylinders and brackets for automatic format adjustment. Documentation available. On-site inspection is possible. Hedpfsv Daggox Aayjfr

Year of construction: 2020, condition: new, ROMER manipulators are characterized by quiet operation. They can be widely used both with simple, as well as complex multidimensional processes They are programmed using a PLC controller Working with long and short strokes Hodpfx Ajfz Dmmjaysfr The toothed belt transmission ensures quiet operation Maintenance-free AC motor Narrow column design for space saving. The robust construction of the manipulators ensures great possibilities and high stability. The manipulator is equipped with a 7 "touch panel or is externally controlled via the ModBus protocol with RJ45 cables

Condition: ready for operation (used), Year of construction: 2019, A conveyor belt is available for buffering and transferring PCBs between processing systems. Transport height: 870mm-970mm, max. transport width: 460mm, min. PCB dimensions X/Y: 70mm/50mm, max. PCB dimensions X/Y: 460mm/460mm, PCB thickness: 0.5mm-4.5mm, max. PCB weight: 3kg. Machine dimensions X/Y/Z: approx. 1590mm/800mm/925mm, weight: approx. 170kg. Documentation available. On-site inspection is possible. Hfjdpfewwvvvsx Aaysr

Year of construction: 2020, condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz Hfsdpfofz Dqmsx Aayor • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: KAP1, air demand: 16,000 m³/h, power: 36 kW (48.95 HP), suction capacity: 16,000 m³/h, Equipment: cabin, Dielectric automatic powder booth KAP1 Price: PLN 492,693.30 + VAT Hfodpfxev Rpx Ss Aayor Electrical and energy data • Voltage: 400 V (3P + N + PE) • Power connection: 36.34 kW • Pneumatic connection: 1" • Air pressure: min. 6 bar • Air quality: oil < 0.1 mg/m³, water vapor < 1.3 g/m³ • Air consumption: 1710 Nl/min (operation) • Compressor: SC-30 • Air tank: 1800 L Painting parameters • Painting speed: 1933 mm/min • Part dimensions: 800 x 1800 mm • Hanger height: 500 mm • Coating thickness: 100 µM • Gun array: vertical Technical data and configuration • Design: dielectric plastic • Passage dimensions: 1000 x 2400 mm • Air flow: 12348–16000 m³/h • Powder center: ProfiCenter CP02 • Manipulators: 2 pcs. • Guns: 8 automatic, 2 manual (ProfiSpray) • Part detection: yes (height, width) • Systems: cyclone separator, ProfiControl, beam pulling • ATEX: zone 22, II 3D Platforms and cabin body • Platforms: entry, exit, stainless steel floor, anti-slip stairs • Housing: dielectric plastic, LED lighting, slots for manipulators Air knives and suction channel • Automatic floor cleaning • Suction channel with pneumatic flap Gun blow-off and control • Automatic blow-off guns • 10" touch panel, 50 programs, manipulator control, dust extractor, drive speed X-axis and part pulling system • Automatic gun setting • Part pulling: speed 570–2830 mm/min, 2 pullers The machine also includes: • ProfiSpray A applicator • PSS-1 controller • PM-1 guns • ProfiCenter CP-02 powder center • CK-D1400L cyclone dust extractor • MA1-180 manipulator and MX1-10 X-axis • OZ-12H dust extractor • ProfiControl 10" control • BP-H2000 W900 part measuring system