Used machining centers with flat or grid table for sale (329)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, TECHNICAL DETAILS Number of milling spindles: 1 pc. Number of controlled axes: 5 pcs. Type of milling table: Beam table MACHINE DETAILS Gksdsx Ahguopfx Aaysf Weight: 3,450 kg EQUIPMENT Documentation CE marking

Condition: excellent (used), Year of construction: 2016, machine/vehicle number: 0-250-95-3275, Handling concept 2, consisting of Lift table, Section bridging by roller conveyor Vacuum arm for positioning material Pneumatically lowerable stop fences Push off device Dust extraction hood for protective boards Dust extraction channel at outfeed from below Transport belt 4050 x 2250mm 14-position tool changer Simultaneous push off and infeed Table Length: 3100mm Table Width: 2250mm Thickness: 100mm X/Y: 96m/min Z: 20m/min 3 Vacuum pumps with a total vacuum capacity 900/1080m3/h 4 Pneumatically lowerable stops 9Kw main spindle – liquid cooled Aggregate interface main spindle c-axis Flex 5 interface for c-axis Ait Jet integrated in extraction hood 12 vertical drilling spindles, including quick-change system Grooving saw swivelling 90 degrees Tool Change Assistance Device Tool length Control PowerTouch with power control hardware CE Weeke Quality Pack Gksdpfx Ajx Ap Akeayef Energy Saving Mode

Condition: excellent (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: AA2/0001518, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 300 mm, nominal power (apparent): 10 kVA, controller manufacturer: SCM, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,200 mm, number of spindles: 2, number of slots in tool magazine: 12, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, SCM Record RD 110NTTVN CNC Machining Centre, Series: AA2/000518 Year 2008. In very good condition. X=6m, Y=1.2m, Z=300m/m. Currently running software for staircase production. 12 Position Tool Changer with 1 Extra Head. Rail & Pod machine with 8 Rails. Can work in 2 Fields. Front Safety Mats, and Overhead Laser System. Fully tooled up with complete documentation. Overall size: 8m. x 2.4m. x 1850m/m (H) Weight : 5000kg. Can be viewed at: The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Video and Photos available on WhatsApp Gksdpfx Aaox Ek Rksyof

Condition: good (used), Infotec 1008 Rotary CNC machine adjustable RPM, manual or auto, 3Ph Gedpfx Aox Ai T Neayokf

Condition: ready for operation (used), Year of construction: 1999, Two Maka Machines: Year: 1999 · Machine No: 422 799 Key specifications Model: MAKA KPF 334R Control: BWO 900C CNC (integrated PC, ~1 MB memory) Working area: X = 1,000 mm, Y = 1,000 mm, Z = 300 mm (fixture height ~120 mm) A/B axes: A = 540°, B = ±100° (200° total) Rapid traverse: X/Y = 45 m/min, Z = 15 m/min, A/B = 10,000°/min Spindle: HSD high-speed spindle — 6.8 kW, 2,000–24,000 rpm, ceramic bearings, air-cooled (nominal power from 12,000 rpm) Tooling: SK30 spindle taper; 10-place drum tool magazine (tools up to Ø60 mm, length ≈130 mm depending on diameter) Table: Aluminium work table ~1,000 × 1,000 mm (T-slots / grid) Vacuum: Vacuum clamping system (vacuum pump spec commonly listed as ~54 m³/h on similar units) Lube: Central automatic lubrication system Electrical: 400 V, 50 Hz (verify on site) MAKA KPF 334 RT – 5-Axis CNC Machining Centre Year: 1999 · Machine No: 422 799 Key Specifications – MAKA KPF 334 RT Working travel: X ≈ 2,750 mm · Y ≈ 2,400 mm · Z ≈ 700 mm A-axis rotation: ~540° · B-axis swivel: ~200° Rapid traverse: X/Y ~40 m/min · Z ~15 m/min · A/B ~10,000°/min Dual work tables: ~1,000 × 1,000 mm each (coupleable) Gkjdpfx Aoxwux Tjaysf Control system: BWO 900 / BWO 900C CNC Spindle: High-speed milling spindle (eg ~27,000 rpm capacity) Tool magazine: Multi-station drum (tools up to Ø60 mm / L approx 130 mm, check actual) Vacuum clamping system & automatic central lubrication Electric: 400 V / 50 Hz (buyer to verify local connection)

Condition: ready for operation (used), 3.1x2.1 Nesting table , unloading table 4 axes 2 additional aggregates for door processing and low level drill on the nesting table , fully serviced by Felder UK. 3 vacuum generators Becker , label and nesting software. optional paramentric production software. low hours. Gkedpfjx Dra Iox Aayof

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,717 h, functionality: fully functional, machine/vehicle number: 904B0018, table width: 3,500 mm, table length: 14,400 mm, saw blade diameter: 1,000 mm, Equipment: CE marking, documentation/manual, TECHNICAL DETAILS Gsdpjx Hg Stjfx Aayskf Maximum saw blade diameter: 1,000 mm C1: 540° B1: 250° C2: 540° B2: 90° Table length: 14,400 mm Table width: 3,500 mm X-axis maximum travel: 5,000 mm Y-axis maximum travel: 15,870 mm Z-axis maximum travel: 1,000 mm MACHINE DETAILS Number of milling spindles: 1 Number of controlled axes: 2 5-axis unit power: 12 kW Operating hours: 1,717 h Main motor power: 55 kW Voltage: 400 V Current consumption: 130 A Power: 65 kW Transport dimensions (L x W x H): 40,000 mm x 2,400 mm x 2,700 mm EQUIPMENT Saw blade unit with flange connection Milling unit with tool changer Documentation CE marking

Condition: used, Year of construction: 2008, Biesse Rover A 3.40 FT K2 Numerically controlled machining center ROVER A 3.40 FT K2 Working fields: X = 3685 mm; Y =1290 mm; Z = 160 mm The composition includes: Automatic lubrication system FT Work Table 4 front stops + 4 back stops equipped with pneumatic system and sensors. 4 side stops equipped with pneumatic system and sensors. Vacuum Pump 300 m3/h 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowingunit Flange for the assembly of aggregates on the electrospindle Prearrangement for operating device with 360° interpolation and gear transmission. Boring head BH 21 L Revolving tool changer with 18 places Prearrangement for the assembly of the automatic unloading device for nested-based machined panels Controls on remote keyboard Numerical Control XP600 BIESSEWORKS BIESSE NEST Module Gedpfxsx Afvtj Aayskf Air conditioner for electric cabinet Inverter Safety devices with mats (Despite our great care all changes, mistakes in technical data, prices and all information is subject to (typing) errors. No guarantee on printed data! Availability subject to prior sales). (Trotz größter Sorgfalt bleiben Änderungen, Irrtümer bei technischen Daten, Preisen und allen Angaben (Tipp-)Fehler vorbehalten. Keine Gewähr auf gedruckte Daten! Verfügbarkeit vorbehaltlich Zwischenverkauf). Prices excl. advertisement cost MachineSeeker / Preise exkl. Inserierungskosten MaschinenSucher Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: excellent (used), Year of construction: 2004, functionality: not functional, machine/vehicle number: AA1/013950, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 300 mm, nominal power (apparent): 10 kVA, controller manufacturer: SCM, workpiece length (max.): 6,000 mm, workpiece width (max.): 1,200 mm, number of spindles: 3, number of slots in tool magazine: 10, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, SCM Record 132 TVN CNC Machine Centre in very good condition. Fully tooled up and currently running software for staircase production. Gkjdpfjx Ekxzex Aayjf Rail and Pod Machine with 8 Rails. 10 Position Tool Changer with secondary head and Saw Unit. Can work in 2 fields, Front Safety Mats, Overhead Laser system. Full documentation available. Over all dimensions: 8m. x 2.4m. x 1850m/m (H) Weight About 6000kg. Ready packed for shipment. Can be viewed at The Old Basket Works, Lyng Road, Burrowbridge, Somerset TA7 0SG Photos and Video available on WhatsApp

Condition: ready for operation (used), Year of construction: 2011, operating hours: 13,802 h, functionality: fully functional, machine/vehicle number: PRATIX Z2-27, travel distance X-axis: 2,700 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, overall weight: 2,000 kg, spindle speed (min.): 24,000 rpm, number of slots in tool magazine: 10, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Description Gsdpfexgdc Hsx Aayskf TECHNICAL SPECIFICATIONS PRATIX Z2-27 AXES Usable working area X-Y-Z * 2,700-1,300-180 mm Axis travel X-Y-Z 3,060-1,735-250 mm Vectorial speed X-Y 60 m/min WORK TABLE Type MF Alu grid table 1,225 – 2,750 Vacuum pump Becker 250m3 DRILLING UNIT F12 Vertical drills No.-rpm 12 (7X-5Y) – 4,000 MILLING MOTOR Power kW (HP) 7.5(10) Min - Max spindle speed rpm 1,500 – 24,000 Tool magazine in table No. 10 positions Installed power KVA 23÷28.5 Total machine weight 2,800 kg Price excluding VAT and tools

Condition: used, Year of construction: 2001, functionality: fully functional, Machine Data • Gantry system with fixed table and moving portal for minimal footprint • Base, bridge, and bridge columns made from steel, welded in one piece, stress-relieved and machined • Main machine assemblies are ribbed welded constructions, optimized for the best stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized via finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading with forklift or overhead crane • Ground precision linear guides with high preload and additional cover bands for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-sided, synchronized drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screws with double pillow block support on the Z-axis • Precision planetary gearboxes with low backlash • Fully enclosed cable drag chains protect cable harnesses from chips and dust • High-quality shielded cable drag chain wiring ensures superior protection against faults and failures • X-axis working area: 1,540 mm • Y-axis working area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 200 mm • Network connection via Ethernet • Remote maintenance via Internet Gkodpjx E Ttbsfx Aayjf FlexiCAM Control • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with Manual Tool Change • Power consumption: 2.2 kW • 5,000–24,000 rpm, steplessly programmable • Cooling by integrated electric fan Extraction System for Manual Tool Change • Hose connection diameter: 80–90 mm FlexiCAM Midrange Vacuum Table (Side Channel Blower) • T-slot profiles, individual ball valves, 6 zones • Side channel blower: 7.5 / 9 kW • Approx. 558 m³/h (50 Hz) or 654 m³/h (60 Hz) Safety Devices • CE-compliant to DIN EN 13849 • Includes EMC filter, emergency stop • Light barrier system controlled by machine controller

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2300x1250x1750 mm weight 800 kg Gjdpfx Aaov Dmrveyokf total power requirement 8,5 kw

Condition: used, Year of construction: 2006, Empty weight: 4.000 kg Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-05-25 - Year: 2006 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: Gedpsx Hfiksfx Aayskf - - Number of controlled axes [pcs.]: 5 - - Min. spindle speed [rpm]: 600 - - Max. spindle speed [rpm]: 20000 - - Main motor power [kW]: 11 - - C-axis present: Yes - Type milling table: Beam table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 6 - └ Vertical drilling spindles [pcs.]: 12 - Saw unit present: Yes - Tool changer positions [pcs.]: 16 - System/software: Xilog plus - Safety feature: Safety mat - Vacuum pump present: Yes - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 250 - CNC options: Offcut conveyor, Manual control - Table length [mm]: 3050 - Table width [mm]: 1240 - Z-axis working range [mm]: 200 - X-axis maximum stroke [mm]: 3500 - Y-axis maximum stroke [mm]: 1815 - Z-axis maximum stroke [mm]: 440 - Transport weight [kg]: 4000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2002, functionality: fully functional, Machine Data • Gantry-type machine with fixed table and moving portal for minimal footprint • Base frame, bridge, and bridge uprights made from welded, stress-relieved, and machined steel in one piece • Main machine assemblies consist of ribbed welded constructions engineered for optimal stiffness-to-weight ratio, vibration damping, and high acceleration • Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table for straightforward loading and unloading via forklift or overhead crane • Ground precision linear guides with high pre-load and additional cover tape for optimal chip removal on all axes • Brushless digital A/C servo motors and controllers on all axes • Dual-side synchronised drive on the X-axis (gantry drive) • Rack-and-pinion drive on the X and Y axes • Precision ball screw drives with dual-end bearing units on the Z axis • Precision planetary gearboxes with low backlash • Enclosed cable drag chains protect the drag chain cabling against chips and dust • High-quality shielded drag chain cables offer maximum protection against interference and failures • X-axis travel: 3,120 mm • Y-axis travel: 2,190 mm • Z-axis clearance: 200 mm • Z-axis stroke: 280 mm • Network connectivity via Ethernet • Remote service via Internet Panel-Based CNC Control System • Touchscreen display • Multifunction keyboard with integrated touchpad • Integrated industrial PC with Windows 7 Professional, hard drive, and Ethernet • Comprehensive remote maintenance functionalities • Includes hand-held unit with electronic handwheel • MCP with rotary switch for feed and spindle override • Mobile control cabinet Hand-held Operating Device • Fast, increment-precise positioning • Handwheel with magnetic detent • Coarse, medium, and fine positioning • 2-channel emergency stop Gkedpfxex E Tmbj Aayof • Protection class IP65 Milling Spindle • Max. spindle power: 4 kW • Max. speed: 30,000 rpm • ISO-25 tool taper • Max. tool diameter (shank): 12 mm • Air-cooled • Pneumatic tool taper clamping • Dry, clean, oil-free compressed air required on customer side (< 0.1 μm, < 7 bar) Automatic Tool Changer / Linear • Linear tool magazine mounted outside the working area • Basic configuration: 4 slots • Up to 20 slots ISO-25 Extraction Unit for Automatic Tool Change • Hose connection diameter: 110 mm • Automatic up/down function for tool change Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Measuring accuracy: 0.001 mm • Contact force: 1.5 N Tool Length Sensor • Automatic tool length measurement via M command • Hard metal contact plate • Sensor mounted outside the working area 2x Side Channel Blowers • Max. power consumption: 7.5 kW • Maximum airflow: 650 m³/h • Rated voltage: 400 V • Rated current: 14 A • Pressure: 39,500 Pa

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1900x1250x1750 mm weight 600 kg Gkjdpfev Dmriex Aayef total power requirement 6,5 kw

Condition: used, Year of construction: 2014, operating hours: 11,517 h, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 070614/B/1-407 - Operating hours: 11517 - Number of milling spindles [pcs.]: 1 Gkodox E Uk Uspfx Aayef - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 4 - - C-axis present: Yes - Working range X [mm]: 7220 - Working range Y [mm]: 1580 - Z-axis working range [mm]: 180 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2200x1250x1750 mm Gkjdpfxjv Dmrce Aayof total power requirement 6,5 kw weight 700 kg

Condition: used, Year of construction: 2009, Price: On request What are Presale Items at Second Owner? Gedpfxex Dil Ij Aayskf Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Details: - └ Description: Excluding tools - Year: 2009 - Documentation available: Yes - CE certificate present: No - Serial number: 113253 - Number of milling spindles [pcs.]: 1 - Material clamp system: Pneumatic - Drilling unit present: Yes - System/software: - Safety feature: Door interlock switches, Enclosed fence - CNC options: Unloading system, Loading system - CNC documentation available: USB stick - Voltage [V]: 400 - Current consumption [A]: 63 - Fuse [A]: 80 - Power [kW]: 32.0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2011, CNC Machining Center Biesse skill 15 36 G FT Year of construction 2011 Machine no. 52549 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks X axis 3765 mm Y axis 1560 mm Z axis 324 mm Inclusive - 2x vacuum pump, Busch Mink MM1322 AV; 360m³/h - Safety mats Spindle bearings need to be replaced, sounds bad. Gksdpfx Aaownh Ifsyjf Disassembled for transport on normal trailer; 6000x2400x2400mm; Own weight 2500kg - Year: 2011 - Documentation available: No - CE certificate present: No - Drilling unit present: No - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Vacuum pump present: Yes - └ Brand: Busch Mink - └ Type: MM1322AV - └ Capacity [m³/h]: 360 - Working range X [mm]: 3765 - Working range Y [mm]: 1560 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! Godpfx Aaoxr Evloyokf - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 89867 - Number of milling spindles [pcs.]: 1 - Type milling table: Flat table - Tool clamping system: HSK-F63 - Drilling unit present: Yes - Saw unit present: Yes - Tool changer positions [pcs.]: 12 - System/software: BiesseWorks - Safety feature: Safety mat - CNC options: Label machine, Loading system, Unloading system Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2020, total height: 2,500 mm, total length: 5,000 mm, total width: 2,400 mm, Empty weight: 2.500 kg CNC machining centre SCM Morbidelli N100 12 A Brand SCM Type Morbidelli N100 12 A Year of construction 2020 Serial number AM00002846 Machining table dimensions 2486x1255 mm (LxW) Groove pattern 40 mm distance Distance between holes vacuum cups 120 mm Equipped with 3 reference gauges Table has 1 vacuum field Table working range X axis 2486 mm Y axis 1255 mm Z-axis 150 mm Stroke of the units X axis 3120 mm Y axis 1685 mm Z axis 250 mm Movement of the axes  Maximum vectorial speed in rapid traverse XY axis 35 m/min Stroke of Z axis 250 mm Panel pass 150 mm Hiteco milling unit Motor power 5.5 kW (7.5 HP) Tool holder HSK-63-F Milling spindle speed 1500-24000 rpm Tool changer 8 positions Central exhaust connection 250 mm Control unit Gkedpewwa Hlofx Aayjf Windows EmbeddedStandard 7 64 bit  21.5 LCD touch screen XILOG-MAESTRO software package  Including vacuum pump Capacity 250 m3/h Power 5.5 kW Max. vacuum 0.9 bar Noise level 81 db (A) Total dimensions 5000x3000x2500 (LxWxH) Total weight 2500 KG - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: AM00002846 - Transport dimensions: 5000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2001, Empty weight: 5.000 kg What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AL/6222 - Number of milling spindles [pcs.]: 1 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 3 Gkodpfx Aajxbzg Esysf - Type milling table: Beam table - Drilling unit present: Yes - └ Horizontal drill spindles [pcs.]: 18 - └ Vertical drilling spindles [pcs.]: 6 - Tool changer positions [pcs.]: 14 - Voltage [V]: 400 - Current consumption [A]: 32 - Power [kW]: 26.0 - Transport weight [kg]: 5000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2012, CNC machining centre SCM Morbidelli M-600 5-axis machine Year of construction 2012 Machine no. AA2/002032 Working distance X-axis 5020 mm Working distance Y-axis 1680 mm Working distance Z-axis 250 mm Tool positions 36 Vertical drilling spindles 24  Software SCM XILOG MAESTRO SCM PRISMA K SCM TTS system Milling spindle liquid-cooled SCM TecPad MORBIDELLI TV Matic SCM PRO-SPACE SCM RAPID 12 SCM RAPID 24 Including vacuum pump Capacity 250 m3/h Disassembled for transport Weight 7450kg - Year: 2012 - Documentation available: No - CE certificate present: No - Serial number: AA2/002032 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 24 - Tool changer positions [pcs.]: 36 - System/software: SCM Maestro - Vacuum pump present: Yes - └ Capacity [m³/h]: 250 - Working range X [mm]: 5020 Gksdpfxswnhccs Aayof - Working range Y [mm]: 1680 - Z-axis working range [mm]: 250 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2014, Price: On request CNC Machining Center Biesse skill 12 24 G FT Year of construction 2014 Machine no. 60961 Recording HSK F63 10x vertical drilling 12 switch positions Software: BiesseWorks Gedpfownhanjx Aayjkf X axis 2465 mm Y-axis 1260 mm Z axis 324 mm Disassembled for transport on normal trailer; 4500x2200x2400mm; Own weight 2000kg - Year: 2014 - Documentation available: Yes - CE certificate present: No - Tool clamping system: HSK-F63 - Drilling unit present: Yes - └ Vertical drilling spindles [pcs.]: 10 - Tool changer positions [pcs.]: 12 - Working range X [mm]: 2465 - Working range Y [mm]: 1260 - Z-axis working range [mm]: 324 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, Year of construction: 2001, Price: On request What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AA1/011994 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets Gjdexzcnkjpfx Aayjkf