Used cycle-controlled lathes with a turning diameter of 0-399 mm for sale (32)

Condition: new, Year of construction: 2025, functionality: fully functional, spindle bore: 50 mm, turning diameter over bed slide: 400 mm, center height: 200 mm, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, total length: 2,495 mm, total width: 1,730 mm, total height: 1,700 mm, type of input current: three-phase, overall weight: 1,500 kg, rotational speed (min.): 50 rpm, rotational speed (max.): 4,000 rpm, three-jaw chuck diameter: 200 mm, Equipment: rotational speed infinitely variable, Cycle controlled lathe center width 1000 mm centre height 200 mm spindle bore 53/50 mm max. Speed 4000 rpm Pgsdpfx Aodtmwteg Djw Spindle connection size 5, DIN55029 Max. drive power Drive power 7,5 / 10 kW Manual machine (operation via electronic handwheels) Siemens 828D full CNC control dimensions (LxWxH) 2320 x 1730 x 1700 mm Machine weight 1500 kg As a regional partner of EMCO we offer maintenance, service and training in the field of conventional machines. Visit our showroom in Stuttgart for machine inspections.

Condition: repair required (used), Year of construction: 1997, functionality: limited functionality, turning length: 1,000 mm, turning diameter: 365 mm, turning diameter over bed slide: 570 mm, rotational speed (min.): 3 rpm, rotational speed (max.): 2,500 rpm, controller model: NUM 1062, No minimum price - guaranteed sale to the highest bid! Condition: Mechanically very good, old tube monitor defective TECHNICAL DETAILS Turning length: 1,000 mm Spindle speed: 3 - 2,500 rpm Machining diameter: 570 mm Swing diameter (max.): 570 mm Turning diameter (max.): 365 mm Workpiece length max.: 1,000 mm Number of cross slides: 1 Spindle diameter: 62 mm Feed Z: 0 - 10,000 mm/min Feed X: 0 - 5,000 mm/min Tool holder: Chisel holder Quill mount: MK 5 MACHINE DETAILS Psdpfx Aowqgqkeg Djgw Control: NUM 1062 Connected load: 35 kVA Connection voltage: 400 V Mains frequency: 50 Hz Overall height: 1,800 mm Total weight: 4,000 kg Space requirement length: 3,400 mm Space requirement width: 1,900 mm EQUIPMENT - 3-jaw chuck - Various soft jaws - Tailstock

Condition: not inspected (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 244, spindle bore: 82 mm, turning diameter: 350 mm, center width: 1,565 mm, turning diameter over bed slide: 540 mm, spindle speed (max.): 3,000 rpm, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Control: HEIDENHAIN MANUAL PLUS 4110 Swing diameter over bed: 540 mm Swing diameter over cross slide: 350 mm Distance between centers: 1,565 mm Workpiece weight: max. 1,500 kg Spindle bore: 82 mm Spindle mount: B 8 DIN 55027 Spindle taper: metric 90 Speed range: 0–600 / 0–3,000 rpm Power: 17.0 / 25.0 kW Torque: max. 1,620 Nm Axes X axis travel: 270 mm Z axis travel: 1,565 mm Rapid traverse X: 10,000 mm/min Rapid traverse Z: 10,000 mm/min Feed range: 0.002–5,000 mm/min Pgsdpfewvhxyox Ag Djw Tooling Type: Multifix size C Tool cross-section: max. 32 x 32 mm Quill diameter: 80 mm Quill stroke: 200 mm Quill taper: MK5 MACHINE DETAILS Dimensions: 5,000 x 1,700 x 1,880 mm Weight: 3,200 kg EQUIPMENT - technical documentation - 3-jaw chuck (diameter approx. 400 mm) - FORKARDT power chuck with 3 jaws (diameter approx. 250 mm, max. speed: 4,000 rpm) - 2 steady rests - Parat 4-position turret - digital axis drives - coolant system - chip container

Condition: good (used), Year of construction: 2000, turning diameter 340 mm turning length 2000 mm control FAGOR 8055 swing diameter 550 mm spindle bore 108 mm spindle turning speed - stepless 2500 U/min power capacity 16.5 kW quill stroke 220 mm diameter of quill 100 mm total power requirement 19 kW weight of the machine ca. 4300 kg Podpfjvwgpbsx Ag Djgw dimensions of the machine ca. 4300 x 1600 x 1800 m This EMCO E 300x2000 cycle lathe is supplied complete with all accessories. Description: - Coolant device - 1 piece Luenette open 20-145mm - 1 piece closed guide 15-185mm - 1 piece face plate - 1 piece three-jaw chuck - 1 piece wedge bar chuck D=400mm - Parat 4-fold tool holder - Various tool holders

Condition: used, Year of construction: 2017, Emcomat E300 for sale. The machine was manufactured in 2017. Machine type: EM300x1500 SIEM Some repairs have been carried out and the following defects are known to us: Geometry checked. Z-guides in the area of the main spindle (chuck) are slightly worn. Z-slide tilts in X and Y under load up to 0.1mm; in this range, precise work is no longer possible at higher clamping pressure. Pgedpfow I S Uuex Ag Djw Tool changer checked and adjusted. X-axis belt replaced and machine zero point set. Automatic band lubrication oil loss – troubleshooting performed, problem resolved, lubrication oil line renewed. Machine is operational – with reservation regarding Z-axis guidance.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, CNC cycle lathe Year of manufacture: 2003 Control: Fanuc 210i-T Spindle bore: 102 mm Chuck: 315 mm Turret: 4-position Travel: X 300 mm / Z 2,000 mm Turning diameter over bed: 500 mm Turning diameter over support: 300 mm Tool package: 32 tool holders Various accessories, documentation Pgodpfxjwww Nds Ag Dew

Condition: ready for operation (used), Year of construction: 2008, Year of manufacture: 2008 Control system: Fanuc Maximum length of the turning: 650 mm Max. turning diameter: 350 mm Spindle bore: 42 mm Maximum rotary speed of the spindle: 3500 1/min Length: 2400 mm Width: 1700 mm Height: 1500 mm Pgodpfxsv Tpanj Ag Dow Weight: 1800 kg Accessories/options: 3-jaws chuck lots of jaws collet type chuck collets steady faceplate Parat type tool holders Under power in our warehouse.