Lathe - cycle-controlled

EMCO E 300-2000

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Njdpfx Agevbquiswscp Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: used, Year of construction: 1998, centre height 125 mm centre distance 400 mm Control FANUC 21i Capstan diameter max. 406 mm wheel dimensions 406 x 127 x 40 mm workpiece weight 30 kg longitudinal slide -travel 483 mm cross slide - travel 254 mm Njdpfx Agexwdwfjwocp total power requirement max. 20 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 3,0 x 2,0 x 2,1 m including 2 Pcs. internal grinding spindle incl. B axis 1° Hirt, controlled incl. C-axis incl. Quick-Set Probe including Sensitron including Magnetic Jaw including hydraulically foldable dresser including other small accessories including documentation without a coolant system, as it was previously connected to a central unit Power On hours approx. 71,000 h Spindle hours approx. 25,900 h

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 211031, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 740 kg Overall dimensions: 155 x 110 x 160 cm Installed power: 2.10 kW Customs tariff number: 8459.6930 TECHNICAL SPECIFICATIONS Vertical rectangular table: - usable surface: 740 x 200 mm - number of T-slots: 2 - width of T-slots: 12-H7 - distance between slots: 120 mm Fixed right-angle table: - usable surface: 700 x 250 mm - number of T-slots: 5 - width of T-slots: 12-H7 Nsdpfxsw Uc Npo Agwjcp - distance between slots: 40 mm - possible lateral movement: 250 mm total Universal tilting table: - usable surface: 600 x 210 mm - number of T-slots: 4 - width of T-slots: 12-H7 - distance between slots: 40 mm - possible lateral movement: 350 mm total Adjustable in 3 planes, on either side: 30°-45°-30° Spindle internal taper: - horizontal spindle head: ISO 30 (40) - vertical spindle head: ISO 30 (40) - universal rapid head: SV E20+ES20 Swivel in vertical plane: vertical spindle head: 360° Longitudinal travel, hand/automatic: 320/300 mm Vertical travel, hand/automatic: 375/355 mm Cross travel, adjustment handle: 150 mm Quill stroke: 60 mm Readout accuracy on micrometer verniers: 0.02 mm Main motor power/speed: 1.5 kW/1500 rpm Rapid feed motor power/speed: 0.45 kW/3000 rpm Coolant device motor power/speed: 0.15 kW/3000 rpm Spindle speed range: - 1st range: 58-375 rpm - 2nd range: 330-2000 rpm Feed rates (longitudinal or vertical): 12-400 mm/min - 10 feed rates, mm/min: 12-18-26-38-57-85-125-185-270-400 Rapid traverse speed (longitudinal or vertical): 1200 mm/min All technical data is given without obligation and subject to errors or omissions.

Year of construction: 1986, condition: ready for operation (used), A universal tool milling machine Deckel from the 1980s is available. Travel X/Y/Z: 300mm/160mm/340mm, table dimensions X/Y: 600mm/250mm, max. table load: 150kg, tool interface: SK40, speed: 2000rpm, feed rate: 1200mm/min, machine dimensions X/Y/Z: approx. 1200mm/1100mm/1500mm, weight: approx. 700kg. On-site inspection is possible. Nodpfx Agjygmcwjwocp

Condition: good (used), Inert gas welding machine, inert gas welding machine, arc welding system, MIG/MAG welding system -Max. welding power: 400 A -Wire feed: 4-roller drive -Version: Water-cooled Ncedpfx Aewl Dptjgwop -Accessories: incl. ground cable, removable wire feeder, gas fitting, hose package 4 m -Quantity: 1 piece available -Dimensions: 500/1010/H1600 mm -Weight: 162 kg

Condition: new, BRAND NEW 3-AXIS MACHINING CENTER HEIDENHAIN TNC 7 digital path control HEIDENHAIN 16" TFT display HEIDENHAIN package (motors, measuring systems, and handwheel) X-axis: 1,430 mm Y-axis: 670 mm Z-axis: 640 mm Table size: 1,500 x 620 mm Table load capacity: 1,200 kg Spindle speed: 10,000 rpm (oil-cooled) Nodpfx Ajhy Atfegwscp Spindle taper: SK 40-BIG PLUS (BVD 40) Maximum spindle motor power: 32 kW ICS – Internal coolant supply – 20 bar Rapid traverse: 30,000 mm/min Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm ATC tool changer: 30 positions (optionally up to 60) Hinged belt chip conveyor 4th axis preparation (rotary table) Full enclosure Only inquiries from Germany will be answered.

Condition: new, Precision control and lathe Make: OPTiturn Model: TH 4210 Item No.: 3462050 Condition: new machine Tip height: 210 mm Top width: 1,000 mm Ncjdpfx Aodbgxcogwsp equipped as standard with: -Machine base -Quad steel holder -Light machine -Reducing bushing MK 6 / MK 4 -2 fixed centres MK 4 -Fixed bezel, 15-105 mm -Bezel running with 10-65 mm -Chuck guard, electrically protected -Coolant system -Change gears set -Oil -Control tool -Manual

Condition: good (used), Year of construction: 1999, machine/vehicle number: 108401 23-D, Offer 25318 Technical Data: - Manual bandsaw machine - Bandsaw blade dimensions: 2375 x 20 x 0.9 mm - 2 cutting speeds: 33 / 66 rpm - Max. clamping capacity: 205 mm - Mitre adjustable left & right: 30° - Cutting range: - 90°: round 160 mm - square 160 mm Ncedpfx Asxta N Asgwop - flat 200 x 100 mm - 45° left & right: round 140 mm - flat 140 x 60 mm - Drive: 400 V / 1.5 / 1.8 kW - Coolant system - Discharge roller conveyor with stop: 3000 mm - Infeed roller conveyor: 1500 mm - Weight: approx. 350 kg - Space requirement: approx. W 1100 x H 1700 x D 1550 mm

Condition: repair required (used), Year of construction: 2003, Kern lathe CD 402 Baij 2003 in top condition but with control system issues. Nodpfx Aoxn Axcjgwocp

Condition: new, table length unterschiedlich mm table width unterschiedlich mm table height (lateral area) unterschiedlich mm weight ca. 240 kg Description : - SPECIAL SET for SIEGMUND 28er clamping tables - ORIGINAL SIEGMUND accessories (!!) included in the scope of delivery : - 1x 280910 .. 28 mm - mobile tool trolley incl. rollers - 8x 280410.N .. Universal stop 150 L nitrided - 4x 280420.N ... Universal stop 225 L nitrided - 2x 280162.N ... Stop and clamping bracket 500 G left nitrided - 1x 280166.N ... Stop and clamping bracket 750 G left nitrided - 1x 280167.N ... Stop and clamping bracket 750 G right nitrided - 1x 280164.N ... Stop and clamping bracket 500 G left nitrided - 1x 280165.N ... Stop and clamping bracket 500 G right nitrided - 4x 280152.N ... Stop and clamping bracket 300 G left nitrided - 16x 280610.N ... Professional screw clamp, nitrided Ncsdpfoxabvdox Agwjp - 6x 280630.N ... Professional screw clamp 45°/90° nitrided - 8x 280651.1.N .. Prism Ø 60-135° nitrided - 8x 280110.N .. Stop and clamping angle 175 L nitrided - 30x 280511 .. Quick-action clamping bolt, double without groove, burnished - 4x 280430.N .. Universal stop 500 S nitrided - 1x accessory set consisting of: - Eccentric, Allen key, brush, - further accessories such as: Probe CleanBasic, Probe Anti-Stick and torch holder