Used Filter systems for sale (58)

Condition: excellent (used), Year of construction: 1998, A stainless steel filter system with compressed air cleaning in very good condition. Filter area 50 m². Material: V4A (1.4571) 316TI Installed stainless steel radial fan drive power 22kW; volume flow: 6700m³/h; pressure: 8000Pa Compressed air valves: ASCO 24Volt Number of filter pockets: 48 Filter medium: no longer available Insulation: Yes with differential pressure measurement Size L/W/H: 3000mm/ 1700mm/ 2100mm (up to outlet) The filter consists of 2 modules that are divided in the middle. Cgolrefg Iphoi Hh Iot Also available stainless steel cooling screw Ø400mm; length 4100mm

Condition: like new (used), Year of construction: 2017, Functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 11 kW (14.96 HP), Equipment: documentation/manual, 3 Teka Pusch Pull fume extraction units for sale. The three units are sold together. Price 14400Eur, net. The units are equipped with Easy-Cleain-Plus filter cartridges. They were used in a welding plant with an area of 800 sq m from 2017 to 2020. Due to a change of activity, the 3 units are for sale together with the installed network. The units can be viewed after consultation in operational condition. The Push Pull system is excellent for cleaning the air in halls where local extraction is not sufficient for some reason or has a negative impact on productivity. The suction openings are placed at a height of approx. 5-6 meters, and the cleaned air is returned to the opposite side of the hall. The system collects and filters harmful substances on the suction branch, and the cleaned air is returned to the space on the pressure branch. It is possible to inhale fresh air on the suction line. Filter equipment: TEKA FILTERCUBE 4H – 11 kW (3DB) Fixed installation extractor and cartridge separator with automatic filter cleaning. The used “Easy Clean+ ” cartridges are provided with a protective layer (“precoat”) during production, which ensures surface filtration, thus Cgelriet A Uiij Hh Ijt high (>99%) filtration efficiency (BIA M filter class) and a long service life. Automatic pulse cleaning is ensured by built-in membrane valves and the microprocessor “Pulse Control” control, which is easy to operate and programmable according to the current requirements. Dirt accumulated on the surface of the filters leads to an increase in the pressure difference (constantly monitored before and after the filters). The control starts the pulse cleaning when the preset value is reached. The dirt thrown off by each pulse falls into the dust container, which must be emptied periodically. The cleaning pulses can be activated either by timing or manually. The text display shows the current operating status (pressure drop, operating hours, date, etc.). Technical data FC 4H 11kW: Pre-filter: perforated baffle Filter area [m²]: 100 (4 cartridges 25m²) Filter cartridge: BIA M Control: Pulse-Control Current consumption [A]: 0.3 Fan capacity [m³/h]: 8,000 (at operating point) Pressure [Pa]: 2,500 (at operating point) Motor power [kW]: 11 Power supply [V/Hz]: 400/50 Current consumption [A]: 22.5 Motor control: Star-Delta connection Noise level [dB(A)]: approx. 78 Intake port: Ø400mm on the left Exhaust port: Ø450mm on the right Dimensions (WxDxH) [mm]: Approx. 800 x 800 x 2920 Floor area of the Filtercube 4H extraction units: 800x800mm)  Each device is IFA (BGIA) certified in accordance with DIN EN ISO 15012-1. The biggest advantage of the Push Pull system is that it works unnoticed, without the need for workers, thus having a positive effect on productivity. The filter cartridges are cleaned using the microprocessor CONTROL UNIT2 control and the special POWER-SPRÜH system. CONTROL UNIT2 filter control The microprocessor CONTROL UNIT2 filter control can be monitored via a plain text display. This control monitors all operations of the extraction and filtration unit. It determines the amount of compressed air required for cleaning, based on this the air volume can be adjusted and the control can be changed manually or even depending on the pressure difference and time. There is also a possibility to remotely indicate the filter status. The control is connected to the operating hour counter and a clock.

Condition: excellent (used), Year of construction: 2013, J. Engelsmann AG cyclone separator, type: Palafix 200/300, year of construction: 2013, weight: 100 kg, dimensions: 1600 mm x 1060 mm x 1810 mm. Including extra crates with parts including eight sieves. Screening surface: 0.18m2m Motor: 0.55kw Cgjlri Hor Ei Ddoh Ijt

Condition: new, Year of construction: 2024, Construction As a standard, the exhaust filter frame is made of steel - AISI 304 (it is possible to make a special version of steel, e.g. AISI 316) Principle of operation The scrubber is equipped with two filtration towers - a pre-treatment column and a proper treatment column. The first column has one filtration level, the second column additional four levels of exhaust gas filtration. Each filtration level is equipped with spray nozzles, allowing for self-cleaning of the filter cartridges. Oils and impurities condensed from the exhaust gases enter the water tank located at the Cgoljitc Hheri Hh Ijt bottom of the machine. Then, impurities are filtered out of the bath using a lamellar oil separator. Installation Purchaser should ensure access to the machine of media such as: cold/hot water, compressed air and ensure the possibility of replacing the water bath after the cleaning process. The columns are disassembled to facilitate transport and installation.

Year of construction: 2020, Condition: new, DESCRIPTION The demineralized water station is used to produce the so-called demi water using ion exchange technology. The station consists of 3 columns Strongly acid cation exchanger working in the sodium cycle, Strongly basic anion exchanger working in the chloride cycle, Celrefz I Srsi Hh Ijgt Carbon filter Our RDI-2 / RDI-4 demineralization stations are equipped with fully automatic control heads. Rouezts The columns are made of AISI316L steel

Condition: used, Technical details: suction stud diamter: 380 mm filter surface area: 610 x 660 + 560 x 470 + 570 x 470 mm Cgjlsu Nwwdori Hh Ijt total power requirement: 4,0 kW dimensions L x W x H: 0,6 x 1,1 x 2,2 mm - 2x suction nozzles at the bottom left/right: Ø 300 x 200 / Ø 200 x 170mm - exhaust air outlet W x H: 280 x 145mm - 3 pieces slide-in filters - with wall fixation *

Year of construction: 2020, Condition: new, High hauling power Soundproofed construction Electronic control 4 "touch panel Constant measurement of flow and filter clogging Final filters Inverter controlled fan • Electrical data 22kW 380-400V 50-60Hz • Theoretical capacity 12000 m3 / h • 1/4 "pneumatic connection • Number of filters 8 pcs. Cgelrijfz I Sgj Hh Ijt • 160 m2 filtration area • Automatic filter cleaning • Air consumption max. 12L 6-8 bar / shot • 50L waste container capacity Description • Dust collector equipped with an efficient radial impeller • Two working modes - Full power and ECO • The basis weight of the material used in the filter is as much as 260g / m2 • High suction power with low energy consumption • Waste container for easy removal of paint deposits • Inspection door for filter replacement • Each filter has its own solenoid valve Power Inverter Constant air flow measurement Vacuum sensor Capacity (m3h) Filter area (m2) Paint container

Condition: used, Technical details: tank capacity: - l voltage: 230 / 50 V / Hz weight of the machine approx.: Anlage ist demontiert kg OSMOSIS PLANT Cgelrsu Nw Hlji Hh Ijt *