Used Ultimax for sale (73)

Condition: used, CNC Vertical Machining Center HURCO Type BMC 25/M Serial No: ZB9-001-052 Year of manufacture: approx. 1995 Travel distances X: 610 mm, Y: 410 mm, Z: 560 mm Table size (clamping surface) 845 x 400 mm Table size (with coolant groove) 1050 x 500 mm Spindle taper SK 40 Distance spindle nose - table 155 - 710 mm Nsdpjw Nklhsfx Abyjdc Table load capacity max. 500 kg Overhang 420 mm Spindle speed max. 10,000 rpm Feed rate 3 to 5080 mm/min Rapid traverse 10 m/min Spindle drive approx. 5.5 kW Power supply 400 Volt, 50 Hz - CNC path control Ultimax 3 with two TFT monitors - Electronic handwheel - Indirect measuring system with rotary encoders on the ballscrew - Tool changer with 20 tool stations - Full enclosure with sliding door - Swiveling control panel - Yaskawa (Japan) spindle drives - Pneumatic-mechanical tool clamp - Without coolant system – pump included – coolant tray missing Machine width 2400 mm Space requirement for transport L x W x H = 3000 x 2400 x 2650 mm Weight 4200 kg Good condition

Condition: good (used), Year of construction: 2003, functionality: fully functional, X-axis travel: 1270 mm Y-axis travel: 660 mm Z-axis travel: 610 mm Control system: Ultimax 4 Table load capacity: 1300 kg Spindle speed: 10,000 rpm Automatic tool changer: 24-position Tool holder: SK 40 Drive power: 15 kW Table size: 1500x660 mm Nsdpfxez Anxws Abyjdc Total power consumption: kW Machine weight: approx. 9 tons Space requirement: approx. 4.8x4.5x2.95 m

Condition: used, Year of construction: 2020, operating hours: 13,674 h, travel distance X-axis: 810 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 640 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 4,211 h, spindle nose: SK 50, Horizontal Machining Center Manufacturer: HURCO Model: HMX 500 Ti Year of manufacture: 2020 Control system: Ultimax Technical specifications: - X-travel: 810 mm - Y-travel: 610 mm - Z-travel: 640 mm - B-axis: 360° - Spindle speed: 8,000 rpm - Drive power: 56 kW - Tool holder: SK 50 - Rapid traverse: 45/40/45 m/min - Power-on hours: approx. 13,674 h - Spindle hours: approx. 4,211 h Nsdpfxezbmzve Abyedc Equipment & accessories: - Internal Coolant Supply (ICS) 40 bar - 2-station pallet changer (500 mm x 500 mm) with tombstone and zero-point clamping system (Quant) In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are included in the scope of delivery only if noted in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2002, functionality: fully functional, Hurco VMX 64, Nodpfx Ajy T Iuvobyedc Year of manufacture: 2002, Control system: Ultimax 4, Travel range X/Y/Z: 1625/860/760 mm, Tool changer: 40-position, Spindle speed: up to 8,000 rpm, High-pressure coolant system, Chip conveyor system, Pocket with islands, DXF, Simultaneous threading, Ultinet, Workpiece positioning detection, Ramping/helix plunging, Advanced Velocity Control, Z-axis cover defective.

Condition: used, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, feed length X-axis: 1,270 mm, feed length Y-axis: 660 mm, feed length Z-axis: 610 mm, controller manufacturer: Hurco, controller model: Ultimax, workpiece length (max.): 1,500 mm, workpiece width (max.): 660 mm, workpiece weight (max.): 1,300 kg, table load: 1,300 kg, rotational speed (max.): 10,000 rpm, CNC milling machine Hurco VMX 50 | Year of manufacture: 2006 | SK40 | Chip conveyor | Spare parts For sale is a Hurco VMX 50 CNC milling machine / CNC machining center, manufactured in 2006, from our machine inventory. The machine is in a well-maintained and good condition. It is ideally suited for workshops, job shops, as well as training and production companies. Technical data: - Manufacturer: Hurco - Model: VMX 50 - Year of manufacture: 2006 - Control: Hurco Ultimax - Travels X / Y / Z: 1,270 / 660 / 610 mm - Table size: 1,500 × 660 mm - Table load: approx. 1,300 kg - Tool holder: SK40 - Spindle speed: up to 10,000 rpm, depending on the model - Rapid traverse X / Y / Z: 30 / 30 / 20 m/min - Tool changer: 20-position - Internal coolant system: included - Coolant system: included - Chip conveyor: included Equipment: - Chip conveyor included Nodjz Iri Iopfx Abyjdc - Various spare parts included - LAN-capable via existing WR box - Coolant system included Sale & Handling The machine is sold ex works. Pickup only. Inspection and demonstration under power are possible upon request. Loading can be arranged after consultation. Price: net plus statutory VAT. If you are interested, have any questions, or would like to arrange an inspection, please contact us.

Condition: not inspected (used), Year of construction: 2000, travel distance X-axis: 610 mm, travel distance Y-axis: 405 mm, travel distance Z-axis: 510 mm, overall weight: 4,000 kg, spindle speed (max.): 8,000 rpm, Ultimax control system Table: 760 x 400 mm Travel: 610 x 405 x 510 mm Tool changer: 24 tools Maximum spindle speed: 8,000 rpm Nsdpfxoy T Ekbj Abysdc Weight: 4,000 kg

Condition: not inspected (used), Year of construction: 2003, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 640 mm, Ultimax control BT 40 spindle, new in 2020 Ndedpfx Aboxu Ikqjyec speed 10,000 rpm travels 1270X660X640 mm 24-tool changer chip conveyor

Condition: used, Year of construction: 2002, functionality: fully functional, The machining center has been inspected by a Hurco technician and found to be fully operational without any faults. Technical Data - Travel ranges: X 1,270 mm, Y 600 mm, Z 610 mm - Drive power: 30 kW - Spindle speed: 15,000 rpm - Spindle taper: SK 40 Type B - Feed rate: up to 23 m/min Work Table: - Dimensions: 1,500 mm x 660 mm - Max. workpiece weight: 1,300 kg Control: - Hurco Ultimax 4, incl. software for milling simulation - electronic hand control unit - Interfaces: RS 232C / V24 - 2 monitors for text and graphics processing - 2 software units for plain text and ISO programming Machine Construction: - High rigidity, suitable for roughing operations Tool Changer: - Double-arm changer with 24 stations Equipment: - Cooling unit for milling spindle - Rinsing system for chip removal - Splash guard cabin - Coolant system with filtration - Internal coolant supply ICS 20 bar - Chip conveyor Ndedsx Iikbopfx Abyjc Machine Data: - Required space (without service areas!) LxWxH approx. 4,750 mm x 3,120 mm x 2,950 mm - Weight approx. 9,000 kg - Connected load 50 kVA, 400V, 50/60 Hz An inspection of the machine is possible by appointment. All tools and operating materials visible in the photos are not included in the scope of delivery. Technical changes and errors excepted.

Condition: used, Year of manufacture: 2014 Year of construction: 2014 Faymonville Multimax F-S43-1AAF 3 axle stepframe trailer 06-2014 Airsuspension 1 positive steert axle Ndjdoz I A Tqspfx Abyec Double hydraulic ramps Hydraulic floor Its own 24 V powerpack for the hydraulics Winch Loadingfloor lenght 9.2 m ABS HU tuv 02-2026

Condition: excellent (used), Year of manufacture: 2026 Carrying capacity: 38.370 kg GVW: 11.130 kg Technical condition: very good Ndodpfx Abozdizieysc Visual appearance: very good Please contact Christian Theißen for more information Manufacturer: Faymonville Model: Multimax Plus Year of build: 2026 Condition: New Data: Equipment: BPW axles and suspension, 1st and 2nd axles fixed, 3rd axle steerable. 3rd axle with electro-magnetic reverse lock via reverse gear and manually activatable. Technical axle load: 12,000 kg. Single-coat sand coating on the cover plates of the gooseneck as well as in the transition areas between the neck and the lifting bed, between the lifting bed and the loading surface, and between the loading surface and ramps. 1 spare wheel with mounting adapter under the loading surface on the right in front of the axles. Cutouts in the outer frame of the loading surface and the lifting bed for hooking in tension straps (LC 2,000 daN). Total dimensions LxWxH: 9,60 x 2,54 m Number of axles: 3 Payload: 38.370 kg Empty weight: +/- 11.130 kg Total permissible weight: 49.500 kg Information: sample images Information: Location: Essen immediately available.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,067 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, table width: 610 mm, table length: 1,270 mm, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis Hurco VMX42t was manufactured in 2007. It features an X-axis travel of 1067 mm, Y-axis travel of 610 mm, and Z-axis travel of 610 mm. The machine includes a table size of 1270 x 610 mm and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the Hurco VMX42t vertical machining centre we have for sale. Contact us for further details. Ndedpfxjzwgzts Abyec - Control System: Ultimax- Phase: 3 Phase- Frequency: 50 Hz- Largest Motor: 15 KVA- Full Load: 30 KVA- Interrupt Capacity: 10,000 AMPS- Optional Equipment: Chip conveyor, Simulation graphics, Tool and material library, Pocket milling with island, Synchronous thread cutting without compensating chuck, High-pressure through-spindle coolant

Condition: used, CNC Vertical Machining Center HURCO Type BMC 30/M Serial No: B3M92202056AB : 9650234 Year of construction 1996 CNC path control Ultimax 3 Travel X: 760 mm, Y: 460 mm, Z: 610 mm Table size (clamping surface) 1010 x 400 mm Ndedotrhq Hjpfx Abysc Table size (with water groove) 1120 x 500 mm Spindle holder SK 40 Distance spindle nose - table 150 - 760 mm Projection 450 mm Spindle speed 80 to 8000 rpm infinitely variable Feed rate 3 to 16,000 mm/min. Rapid traverse 24 m/min. Spindle drive 7.5 kW at 30 min / 5.5 kW at 100% Mains connection 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw spindle - Tool changer with 24 tool positions - Fully protected cabin with sliding door - Rotating control panel - spindle drives Yaskawa (Japan) - pneum. mechanical tool clamp - Coolant unit adjacent, pushed under from behind - trough rinsing Machine width 2400 mm Space required for transportation L x W x H 3400 x 2400 x 2550 mm Weight approx. 4800 kg good condition

Condition: good (used), Year of construction: 1997, Type / Model: BMC30 Control: Ultimax SSM Operating hours: 5,744 h Travel x-y-z: 760 - 460 - 610 mm Table: 1,130 x 500 mm Table clamping area: 1,000 x 400 mm Speed range: 80 to 8,000 rpm Spindle mount: SK40 Feed rates: 3 to 7,600 mm/min Rapid traverse: 7,600 mm/min Ndjdpfxjv I Dn Ns Abyoc Tool changer: 24 stations Power supply: 11 kW Accessories/equipment: Coolant system, external interface Condition: Good Weight: Approx. 4.0 t Dimensions: 2,200 x 2,300 x 2,800 mm (without display)

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. Ndsdpfxozylx Ao Abyjc - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Technical Specification Taper Size ISO 40

Condition: used, A CNC machining center with T-slot table is offered. Control: HURCO Ultimax with dual-screen console. Equipped with several fixtures mounted on the machine table, coolant system and available HURCO documentation including training documentation for the Ultimax CNC control. Inspection possible by appointment. Nedsz Hzd Sjpfx Abyedc

Condition: ready for operation (used), Year of construction: 2007, operating hours: 620 h, Travel path X/Y/Z: 1630mm/860mm/760mm, speed: 8000rpm, torque: 142Nm, power: 15kW, tool positions: 40, max. tool diameter: 75mm/127mm, max. tool length: 300mm, max. tool weight: 10kg, table dimensions X/Y: 1680mm/890mm, max. table load: 2700kg. Machine dimensions X/Y/Z: approx. 6400mm/4400mm/3300mm, weight: approx. 14500kg, control: Hurco Ultimax 4, operating hours: approx. 621h. Documentation available. An on-site inspection is possible. Expected to be available from mid-2026. Ndedpew Dfhzjfx Abysc

Condition: good (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 610 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 610 mm, - ULTIMAX 4 control - toolchanger for 24 tools - coolant through spindle - chip screw - electronical hand wheel - measuring feeler Renishaw Ndjdpfx Absx D A Ddsysc Technische Daten / technical details: Verfahrweg X / X-Travel 610 mm Verfahrweg Y / Y-Travel 510 mm Verfahrweg Z / Z-Travel 610 mm Tischgröße / table size 760x510 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 10-10000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 24 fach Eilgang / rapid feed 30 m/min Gewicht der Maschine ca. / weight 4700 Kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, For sale is a vertical 3-axis CNC machining center, Hurco BMC20, with Hurco Ultimax control. The machine is ideally suited for toolmaking, single-part production, and small batch sizes. Technical data: Control: Hurco Ultimax Travel in X: approx. 560 mm Travel in Y: approx. 355 mm Travel in Z: approx. 355 mm Table size: approx. 760 × 355 mm Tool holder: SK40 / CAT40 Spindle speed up to 6000 rpm 16-tool automatic tool changer Main motor: approx. 7.5–10 HP Rapid traverse: approx. 10 m/min Machine weight: approx. 2800–3200 kg Equipment: - various accessories Njdpfx Abjy T Hkpsyodc Condition: used Machine is complete Inspection possible while powered on

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis Hurco VMX24 vertical machining centre was manufactured in 2004. It features an impressive X-axis travel of 610 mm and Y-axis travel of 508 mm, with a maximum spindle speed of 10,000 RPM. The machine includes advanced control options such as synchronous tapping and advanced velocity control. If you are looking to get high-quality machining capabilities, consider the Hurco VMX24 vertical machining centre we have for sale. Contact us for further details. Nedpfjzc R Atsx Abysdc - CNC Control: Ultimax (Dual-screen console configuration)- System Software Version: 2.37.03e (Patch j) Oct 7 2013- Machine Class: Vertical- Machine Hour Meter: 0.0 (System screen value)- Spindle Hours: 10,500 h (Per text listing)- X-Axis Travel Limit (Plus): 610 mm- X-Axis Travel Limit (Minus): 0 mm- Y-Axis Travel Limit (Plus): 508 mm- Y-Axis Travel Limit (Minus): 0 mm- Z-Axis Travel Limit (Plus): 0 mm- Z-Axis Travel Limit (Minus): -610 mm- Maximum Spindle Motor Speed: 10000 RPM- Maximum Spindle Tool Speed: 10000 RPM- Maximum Rapid Traverse: 30000 mm/min- Maximum Contouring Feedrate: 15240 mm/min- AC Voltage: 400 V, 3-Phase- Frequency: 50 Hz- Largest Motor Rating: 7.5 kVA- Full Load Rating: 18 kVA- Interrupt/Breaking Capacity: 10000 Amps- Country of Manufacture: Taiwan- Control Options Installed: 1. Pocket with Islands, 2. DXF, 3. Synchronous Tapping, 4. UltiNet, 5. Advanced Velocity Control, 6. Ramp/Helix Entry- Structural Upgrades: New bearings fitted on X and Y axes- Exclusions: Vise, tools, and other shown accessories are not included

Condition: ready for operation (used), Number of axes: 3, connected load: 30kVA, control: Hurco Ultimax 4, weight: approx. 10.5t, equipment: chip conveyor, full enclosure cabin, electronic handwheel/control panel, coolant system, tool magazine. The machine should be overhauled, electronic components such as the mainboard and hard drive have been replaced repeatedly. An on-site inspection is possible. Nodpfey Tx Nqex Abysdc

Condition: ready for operation (used), Year of construction: 2003, X-axis: 1600mm, y-axis: 900mm, z-axis: 760mm, connected load: 38kVA, control: Ultimax, operating hours: approx. 50,000h, with CTS (coolant through spindle), Knoll AE 1058 coolant filtration and processing system. An on-site inspection is possible. Ndedpjza E Ryofx Abysc

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: B3M92212078CC, CNC Vertical Machining Center HURCO Type BMC 30/M Year of manufacture: 1998 CNC path control Ultimax 3 X: 760 mm, Y: 460 mm, Z: 610 mm Table: 1010 x 400 mm Spindle mount: SK 40 Distance spindle nose - table: 150 - 760 mm Overhang: 450 mm Spindle speed: 80 to 8000 rpm, stepless Rapid traverse: 24 m/min Spindle drive: 7.5 kW at 30min / 5.5 kW at 100% Electrical connection: 400 Volt, 50 Hz - CNC path control Ultimax 3 (with hardware update, e.g. TFT monitors) - Electronic handwheel - Indirect measuring system with rotary encoders on the ball screw - Tool changer with 24 tool positions Nodpfx Absw Tdiuoyodc - Full enclosure / sliding door - Swivel operating panel - Pneumatic/mechanical tool clamping Dimensions (L x W x H): 3400 x 2400 x 2550 mm Weight: approx. 4,800 kg Good condition

Condition: good (used), Year of construction: 2004, Extras Nsdpfezym T Ujx Abyedc Single extension Toolbox made of stainless steel Lashing points Spare wheel with bracket Mechanical landing gear Rear bumper with lighting Toolbox mounted on the gooseneck Warning signs for overwidth Twist-lock for containers Kingpin 2.0 inches = Further information = Year of manufacture: 2004 Unladen weight: 10,800 kg Payload: 47,200 kg GVW: 58,000 kg Technical condition: good Visual condition: good Price: On request

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Hurco machining center VM 1 very good condition x-way: 660 mm Ndsdporxfxhjfx Abysc y-travel: 355 mm z-travel: 455 mm Control system: Ultimax Table clamping surface: 760x355 mm Table load: max. 340 kg Tool magazine with: 16 places Tool holder: SK - A40 Spindle speeds: 10-10000 rpm Spindle hours Total power requirement: 7.8 kW Machine weight approx.: 3.8 t

Condition: used, total height: 2,400 mm, total length: 2,700 mm, total width: 2,350 mm, Year of manufacture: 2000 Colour: White Empty weight: 5.000 kg CNC Digital type: UNIMAX Number of axes: 3 Travel x: 1020mm Travel y: 510mm Travel z: 610mm Min. Spindle speed: 80rpm Max. Spindle speed: 8000rpm Table: 1220x510mm Motor power: 15kw Ndodpfxozrxvle Abysc - Year: 2000 - Documentation available: Yes - CE marking present: Yes - Serial number: 06584 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Hurco - Control system type: Ultimax - Power [kW]: 15.0 - Number of axes [pcs]: 3 - X-axis travel [mm]: 1020 - Y-axis travel [mm]: 510 - Z-axis travel [mm]: 610 - Table length [mm]: 1220 - Table width [mm]: 510 - Min. spindle speed [rpm]: 80 - Max. spindle speed [rpm]: 8000 - Transport dimensions: 2700mm x 2350mm x 2400mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum