Used pumps for sale (163)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total length: 1,840 mm, total width: 915 mm, total height: 914 mm, overall weight: 880 kg, 2x Apollo KRH-80/200-308CN Condensate Pumps and Spare Parts (Unused 2021) 2x KRH-80/200-308CN condensate pumps Bodpfxoy Tcc Uo Am Rewn L x W x H: 1840mm x 915mm x 914xx each Weight: 880kg each With spare parts Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement form (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Year of construction: 2020, condition: used, FISCHER – Cantilever racking for installation in enclosed spaces. The racking must not be clad on-site without consulting FISCHER. Design according to the specifications. Racking No. 1 - single-sided (cantilever arms bolted on). Number of racks: The following information refers to 1 rack. 1 unit Number of uprights: 3 units Racking length (center-to-center distance): 2,500 mm Distance between uprights: 2 x 1,250 mm Upright height (hole pitch 100 mm): approx. 2,500 mm Top storage level: 2,200 mm Foot length: 1st side/2nd side 2,000 / 0 mm Cantilever arm lengths (total length incl. end stop): 2,000 mm Cantilever arms: 1st side/2nd side 4 / 0 units Desired load capacity per cantilever arm: 500 kg Load capacity per upright side (without considering the foot): 2,000 kg Max. floor pressure: 0.11 kN/cm2 Shipping weight per rack: 607 kg Color of uprights: fire red, similar to RAL 3000 Color of cantilever arms: fire red, similar to RAL 3000 1 spray can The profile thickness applies to 100% utilization of the rack load capacity. Seismic zone could not be determined. A verifiable or tested static analysis is available for an additional charge. Bsdpfxozab Rcj Am Rswn Text for the static calculation: Important note regarding the static calculation of the storage system: The static calculations take into account the fundamentals according to Eurocode (DIN EN 1991-1-1, DIN EN 1991-3 and DIN EN 1991-1-4) and the framework conditions of the respective national annexes (NA) applicable in the countries where the system will be installed. Since storage systems are usually installed in urban or industrial areas, the requirements applicable to these areas (e.g., for Germany, ground category III and IV) are included in the calculation. Important note regarding building permits, please note: Storage systems may require a permit according to the respective state building code. In the event of an order placed with Fischer, the client undertakes to obtain the necessary public-law permits for the storage system. If the permit is not granted, or the granted permit is revoked or withdrawn, the contractor shall not be liable for this. In the event of installation by Fischer, we generally assume that a valid building permit is in place at the time of installation. Any necessary verifiable static calculations for the building application can be obtained for a fee; please contact us. Cantilever racking: 1 unit 1,500.00 Foot rounding as a safety element: 3 units 13.50 per foot and side Storage location: Customer

Year of construction: 2015, condition: used, Exhibit Bwedpfxov Dat Tj Am Ron Storage location: Sonnefeld

Condition: used, 3700mm long, 960mm high, and adjustable Bsdpov Dauqefx Am Rown Storage location: Nattheim

Year of construction: 2022, condition: used, The panel swivel fix facilitates handling when moving panels from a vertical to a horizontal position. The support frame is hydraulically height-adjustable and also pivots. Support rollers facilitate horizontal movement. Four swivel casters ensure safe movement. Technical data: Support height: • Vertical approx. 340-120 mm • Horizontal approx. 1200-890 mm Max. panel size: 5200 x 2100 mm Load capacity: 250 kg Bwjdpfx Aov T Ilvjm Ron Storage location: Bad Wimpfen

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Bsdpfsv Dauwex Am Rewn Storage location: Nattheim

Year of construction: 1999, condition: used, Crane attached to the warehouse, 5 m reach, 500 kg load capacity, without Schmalz lifting device! Storage location: Nattheim Bwedpsv Dau Dofx Am Rsn

Condition: used, Mobile Dimensions: 1200 x 1500 x 2000 mm Storage location: Nattheim Bsdpfx Aov T Ikxem Rjwn

Year of construction: 2022, condition: used, Uplifter mini crane MC 285-3 CWME, lifting capacity 2,820 kg at a radius of 1,400 mm. Maximum lifting height: 8,700 mm. Maximum working radius: 8,200 mm (at a load of approx. 150 kg). Equipped with assembly jib and transport cart UPT 200. Less than 100 operating hours. Storage location: at customer site. Bodpfx Asytrd Tem Rown

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: SNDE106744, input voltage: 400 V, input frequency: 50 Hz, Vacuum casting system was used to cast epoxy resin into plastic housings Bwodpfx Asvnrz Dsm Rjn

Condition: new, For sale: Original KSB RIO50-40D circulation pump, brand new, in its original packaging. The pump is intended for heating and cooling installations, as well as for applications in building technology and industry. ⸻ Technical Data • Manufacturer: KSB • Model / Type: RIO50-40D Bwsdpfeyhhmgox Am Rjn • ID Number: 29 132 136 • Power supply: 230V, 3~ 400 V / 50 Hz • Number of speeds: 3 • Power consumption (P1): 180 / 240 / 330 W • Nominal diameter: DN50 • Connection: flanged • Operating pressure: PN6 / PN10 • Max. medium temperature: 130°C • Protection class: IP44 • Insulation class: H • Weight: approx. 14.1 kg • Manufactured in: EU ⸻ Condition • New, unused • Original KSB packaging • Manufacturer's manual included • Condition exactly as shown in the pictures ⸻ Applications • Central heating systems • Heating and cooling circuits • Industrial and commercial facilities

Condition: excellent (used), I will sell a DDR motor pump. - 800l/min - 28PS. Bjdpfsv Nrf Esx Am Rewn - Very good condition.

Condition: excellent (used), For sale: professional industrial pump ASTRA CM 50-125A, manufactured in Italy (Padova, Italy). The pump is in very good visual and technical condition. Robust construction designed for installations, water systems, and technological circuits. Three-phase motor 5.5 kW, 2800 rpm, 400 V power supply. The pump is equipped with threaded connections. The unit has been regularly serviced – inspection sticker by DPT is present. Very durable equipment – Italian production, heavy-duty cast iron construction. Technical data • Manufacturer: ASTRA (Padova, Italy) • Model: CM 50-125A • Type: three-phase electric pump • Motor power: 5.5 kW • Power supply: 230 / 400 V • Speed: 2800 rpm • Maximum capacity: 1200 l/min • Head: 25 m • Insulation class: F • Protection rating: IP55 Shipping or personal collection possible. Bwodpjyuqrfofx Am Rjn The listed price is for 1 piece.

Condition: excellent (used), Professional fire-fighting motor pump from the renowned German manufacturer Ziegler (Albert Ziegler GmbH). This device is designed for water transfer—ideal for fire departments, agriculture, construction sites, and industrial applications. Robust, compact build on a transport frame (can be transported with a forklift truck). The pump is in good technical condition and complete as shown in the photos. Technical data: - Manufacturer: Ziegler (Germany) - Model: TS 8/8 - Year of manufacture: 1992 - Output: 800 l/min - Operating pressure: 8 bar - Speed: 4,400 rpm - Engine: petrol/gasoline - Operating hours: approx. 56 h - Weight: approx. 143 kg (ready for operation) - Standard: DIN 14410 / 14420 Condition: - Used - Normal signs of use - Technically flawless and fully operational Scope of delivery: - Ziegler motor pump - Firefighting couplings - Complete set as shown in the photos Bsdpfoy D An Ssx Am Rswn Additional information: - The price refers to 1 unit of the pump - Sold as shown in the pictures - Can be shipped on a pallet or collected in person

Condition: used, Abel Piston Diaphragm High-Pressure Pump as Feed Pump, used Model: TH-G332-200/2 Features: including drive unit Description: Robust and high-performance industrial piston diaphragm pump. This unit is ideally suited for demanding conveying tasks such as slurries, suspensions, or abrasive media. Manufacturer: ABEL Year of manufacture: 1993 Flow rate: approx. 30 m³/h Operating pressure: up to 1.5 MPa Motor power: 15–18.5 kW Stroke rate: approx. 50 min⁻¹ Stroke length: 150 mm Equipment: Electric motor with drive unit, - Pulsation damper / pressure vessel Bsdpfx Amoy Exqle Rjwn - Piping & valves - Lubrication unit - Completely mounted on base frame Condition: used, tested (see inspection sticker) Applications: industry, mining and mineral processing, tunneling, chemical, wastewater treatment Availability: immediately ex stock, inspection by appointment possible

Condition: used, Year of construction: 1991, Type: WKF 50/12 N.SE Size: DN50 12 stages Standard version with mechanical seal Bedpfjy A Rbdex Am Rjwn Flow rate: 26.9 l/s (96.8 m³/h) Head: 380 m Speed: 2,960 rpm

Condition: used, High-pressure pump unit Bodpfsyt Nv Tjx Am Rewn Type: 1502 35 High-pressure plunger pump of the 2 series Max. pressure: 228 bar Flow rate: 130 l/min Driven by ABB 55 kW electric motor

Condition: used, Year of construction: 1998, operating pressure: 100 bar, overall weight: 590 kg, rotational speed (max.): 600 rpm, power: 30 kW (40.79 HP), URACA high-pressure pump unit Type: RS606E/100 URACA 3-plunger pump KD606 Flow rate: 138 l/min Bwodpfx Asv Hqpqom Rsn with 30 kW electric motor

Condition: good (used), in total 8 pieces available 1 x NETZSCH Nemo NM021BY0, year: 1998 Bwodpfx Amjlhr Hfe Rjn 1 x NETZSCH NM045, GETRIEBEBAU NORD, year: 2001 2 x ALLWEILER SEP 380.1A11P01, year: 1990/1992 2 x ALLWEILER AE1N25-ID, GETRIEBEBAU NORD 0,75 kW, year: 1996 1 x ALLWEILER AE1E550-ID, GETRIEBEBAU NORD 4 kW, year: 1996 1 x unknown brand, LEROY SOMER gearbox, 5,5 kW

Condition: used, 2 identical sludge pumps (manufacturer could be Warman) 1 x with 90 kW electric drive unit; 1 x without drive motor Impeller diameter: 600 mm Inlet diameter: 250 mm Outlet diameter: 200 mm Bsdetpplrspfx Am Rewn

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: 100166696, AHLSTAR pump APP43-300 S Centrifugal pump with mounting frame, motor not included. Bwsdpfx Aexg Nxaem Ren

Condition: new, For sale: industrial twin screw pump (twin spindle) by the renowned manufacturer Leistritz Nürnberg. The pump is new / stock item, unused – in excellent condition, as pictured. Identification data (from nameplate): • Manufacturer: Leistritz Nürnberg • Type / Series: LN • Model: 48/80-F-C • Serial number: 6812.129 • Design: twin screw pump (twin screw / twin spindle) Features and advantages: • Two intermeshing screws (no metal-to-metal contact) • Very low flow pulsation • Suitable for various media viscosities Bsdpfxoyga U Ho Am Rjwn • High operational reliability and durability • Bidirectional operation possible • Industrial-grade continuous operation Applications: • Oils and lubricating media • Industrial and process installations • Hydraulics, power industry • Cooling / lubrication systems • Process applications Condition: • New • No damage • Ports sealed with caps • Price listed is for 1 piece.

Condition: new, Sale, Lowara vertical pump/New Bwodpfx Ameviyuue Rsn Parameters : - Capacity max: - 39000L/h - 15000L/h. - Lifting height max: -93-38m - Motor power: 11 kW - Rotational speed: 2900 rpm

Condition: new, Sale, Lowara vertical pump/New Bsdpovilv Rsfx Am Rjwn Parameters : - Capacity max: - 36000L/h - 14000L/h. - Lifting height max: -39-19m - Motor power: 4 kW - Rotational speed: 2900 rpm

Condition: excellent (used), Lowara SV 15Kw 2900obr/min, 39m3/h Vertical Pump. Bwedpfovgba Hsx Am Rsn