5
* General * SKU254S1023 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
B7je9enxjo
3
year of construction: December 2010CE-conform22 kWimmediately available
Bisurr7wau
8
Type: HF R 800-13 D DS3
Manufacturer: Hürner Funken
Year of manufacture: 2009
Documentation: no
Inspection: yes
Storage location: customer
Status: used / second hand
volume flow: 48000 m³/h (max.)
pressure: 2572 Pa
Motor: (direct drive)
Voltage: 400 V
frequency: 50 Hz
amperage: A
Power: 55 kW
revolutions: 1280 1/min
Connections:
Diameter: 800 mm (suction side inside)
-: 692 x 692 mm (pressure side inside)
Material: PVC (housing (fan wheel coated))
Dimensions: (total)
Buoh9iapy...
10
We offer a 2.2 kW blower, which was been only rarely used.
Ypvmdlmr
1
Side channel blower 250 mbar, 5.3 cbm/min
Ca3mxdoxtp
Discover more used machines
9
An Aerzen rotary blower with acoustic hood.
Run until 2019 and regularly serviced by specialist company.
Has been used as a pressure blower.
Cbnq8kla
Ready for use and tested immediately.
Manufacturer: Aerzen RKR
Type: GM 7L Aerzen Stage
Year of manufacture: 2006 (inquired at manufacturer) !!!
Volume flow: 7m³/min
Pressure increase: 400 mbar
shaft power: 6,68 kW
motor power: 7,5 kW
speed compressor: 4140 rpm
Electric motor: Lammers
Efficiency: IE 3
Voltage: 400 Volt
Speed: 2950 rpm
Alternatively...
10
1 used top shafts = two-fraction wind sifter
Manufacturer: Schulz & Berger, Altenburg, Germany
7sdpdfw
Type: ZFS - 1800
Year of construction 2015
Nominal air volume 20,000m³ / h
for the separation of different bulk material grains by means of a stream of classifying air
in heavy and light goods
dismantled and ready for transport
Assembly plans + spare parts list available
10
MORO 11kw high pressure dust, chip extraction fan
Operating range: the fans in this series are designed to
to move a small amount of air under high pressure.
Manufacturer: MORO VA902 / pt3l
Bx9n2tgffv
year of production: 2013
air delivery: 860m3 / h
pressure: 14270-16460 Pa
impeller: pre-curved steel, direct drive.
motor 11kw 400v 50Hz
speed: 2900 rpm
suction side dia: 200 mm
trace side tube: 100 mm
machine weight: 220kg
Field of application: designed for pneumatic conveying, drying and press...
5
Description: Process exhaust fan for aggressive media mounted on stand. All wetted parts are made of plastic.
Type: HF R 630-13 R DS 3
Manufacturer: Hürner Funken
Year of manufacture: 2012
Documentation: yes
Inspection: yes
Storage location: Warburg warehouse
Status: used / second hand
volume flow: 25000 m³/h (max.)
pressure: 2307 Pa
S83ji9
revolutions: 1863 1/min (max)
Material: (PVC)
Diameter: 40 mm (condensate drain connection)
Length: 1580 mm
Width: 1400 mm
Height: 1560 mm
Co...
4
High performance fan
Type : MHI 28-78/4
Year of manufacture : 2016
M-No : 84668a
Kd.No. : 8026/ 20161369
Vn =6500 m3/h
V =8050 m3/h
t = 50 - 150 °C
p = 1,044 kg/m3
n =2955 max = 3300 min-1
The high performance fan is in a good used condition.an operating manual is available.
Price is VB
Cakb9ustcx
I am glad to receive your offers.
If you have any questions, please feel free to contact me.
L.g
10
Keller Lufttechnik MKR 063-55 fan
Air flow rate: 37,000 Nm³/h
Total pressure difference 3400 Nm³/h
Spec. gas weight at 20 degrees: 1.2 kg/m³
Motor power: 55 kW
Fan speed 1475 /min
year of construction: 1987
Item condition: used
Further articles - new and used - you will find in our shop!
International shipping costs on request!
Q3kknqta
8
KAESER BB 88 C ROTARY PISTON BLOWER,
( PVC POWDER SUPPLY DEVICE )
Unit: BB 88 C.
Year built: 2011
Pump speed: 6,50 m³ / min.
End pressure (abs): 1.01 bar
Maximum pressure differential: 500 / mbar
Nominal motor power: 11 KW
B3a0qxucln
Block speed: 5,180 rpm
7
We offer a 5.5kW radial fan for €500 and a ring fan for €230. The blowers can be purchased separately.
2ufbmilx
10
Manufacturer: Kongskilde
Machine type: 100503007
Overall size: 1200 x 1100 x 800 mm
Cahyt0drur
Impeller diameter: 600 x 200 mm
RPM: 4100
9
Type: FB 440
Manufacturer: Kaeser
Year of manufacture: 1999
Documentation: yes
Inspection: yes
Storage location: Warburg warehouse
Status: used - good
flow rate: 34.6 m³/min
pressure: 1 bar (suction pressure)
pressure: 1.99 bar (final pressure)
Pressure: 990 mbar (pressure increase max.)
Speed: 2970 (blower)
Power: 75 kW (motor)
Weight: 1167 kg
Other: 99 (dB(A) DIN 45635)
Cbvohjgiy3
length: 2560 mm
width: 1076 mm
Height: 1750 mm
11
Brand : Venti net
Type : SBE (TRU) 904T/exs-RD
Jkojlitn
In : Rund 550 mm
Aus : 500 mm x 700 mm
Abm : 150 cm x 155 cm x 175 cm
Gewicht : 671 kg
E-motor 400 volt 33 KW 1450 RPM
New
8
E.M.F. Dordt B.12 Radial blower, mobile on wheels
Manufacturer: E.M.F. Dordt B.12
power output: 1,1kW
Voltage: 220/380V
Hz: 50
PE: 242U 15/6
n: 920
More articles - new and used - can be found in our shop!
International shipping costs on request!
Dwmd0y
15
2 pieces Hermetically sealed centrifugal fans.
Mechanical seal with sealing water connection.
Iaridiez
Manufacturer FIMA Maschinenbau
Type: RC4R U 125KBG GR360 MB160
Year of manufacture: 2004
Operating speed: 4398 rpm
Volume flow: 0,35 m³/s (1260m³/h)
Pressure increase: 175 mbar (17500 Pascal)
shaft power: 9,5 kW
maximum casing pressure: 1,5 bar
maximum medium temperature: 80°C
material medium touching parts impeller/ housing stainless steel 1.4462
electric motor: Siemens 11 kW EFF Class 2.
Volt...
6
Radial Fan - Piller 7,5 kW
- Volumetric air flow: 160 m³/min.
- Compression: 160 mm/WS
Jasoazhj
- Motor power: 7,5 kW, 1.440 rpm, 380 V, 50 Hz
11
High Pressure Centrifugal Fan, Pressure Blower, Ventilation Fan, Centrifugal Blower, Blower
Fz282op
Manufacturer: Ebm-Papst D3G310-GG05-01
Operation: 3-Phase 400V AC
Power: 3.18kW
Speed: 3140 rpm
Environmental, Application factor: -25… + 40 ° C
Engine Type: M3G112-IA
Protection: IP 54
Air transport: 4990 m3 / hour
pressure: 300-1800 Pa
Fan Diameter: 310 mm
Fan housing Diameter: 370 mm
Overload motor
Extended voltage range 380V - 480V, both 50 / 60Hz
Without direct drive, belt and pulley
Simple ...
10
Description: GRP - Fan for conveying aggressive and corrosive gases.
Type: CMHR 42/GR90/C
Manufacturer: Ceilote Korrosionstechnik
Year of manufacture: 1981
Documentation: no
storage location: warehouse Warburg Z
Status: used - satisfactory
volume flow: 65000 m³/h
Pressure: 1570 Pa (differential pressure)
Temperature: 60 °C (max. permissible temperature)
revolutions: 590 1/min
connections: 1050 mm (cross section suction)
: 1000 X 1000 mm (flange pressure side)
Dimensions:
Length: 32...
3
Aerzen GMA 13.6 Positive Displacement Blower
with sound insulation hood
Engine power 30 kW
Very good condition, directly from production!!!
Br3eqbe8mj
5
There are two identical machines available, intake volume flow: 29.05m³/min, volume flow: 1980m³/h, mass flux: 1939kg/h, suction density: 1.112kg/m³, pressure gradient: 600mbar, inlet temperature: 40°C, exit temperature: 102°C, blower rotational speed: 4170/min, motor power: 45kW, length: 1800mm, width: 1500mm, height: 1978mm, weight: 1.33t, including Sea Container SC 40: inner dimensions: 11.900x2330x2350mm, total load: 26.98t, empty weight: 3.5t, Fassungsvermögen: 64m³, length: 12.192mm, width...
5
Centrifugal blower from Voith Howden.
Delivery volume: 202000 m³/h
Pressure increase: 4800 Pa
Rotational speed: 960 rpm
Shaft power: 421 KW
Nmefb
electric motor: 550 kW
Total weight: approx. 12000 Kg
Dimensions:
Width 3300 mm x length 6000 mm x height 4000 mm
Housing horizontally divided !!!
Frequency converter is included.
4
Radial Fan - Bühler 22 kW
Bzsryi7a00
- Volumetric air flow: 325 m³/min.
- Compression: 250 mm/WS
- Drive: 22 kW, 1.500 rpm, 400 V, 50 Hz
3
Scheuch Radial Fan
Capacity: 50000m3 / h
Working temperature: 85 degrees Celsius
Vacuum: 12,000 Pa
Rotation speed: 1500 u / min
B9of33pdvm
Weight: 6060 kg
Power: 250 kW
Atex: EX II 3D
VKD31 0630-HC14
1
1 blower year of construction 1987, 800 mbar, 24,2 m3/min, 45 kW, 500 V; 1 blower year of construction 1993, 400 mbar, 24,2 m3/min, 45 kW, 500 V; 1 blower year of construction 2007, 700 mbar, 21,8 m3/min, 45 kW, 500 V
Bfoxphzp7b
3
Aerzen VM 9 R Delta Screw Compressor
with sound insulation hood
Suction pressure: 1 bar
Suction volume: 600m³/h
Motor power: 55 kW
Very good condition, directly from production!!!
D9b78lzfa
6
Ventillator
Lr7w7
Diameter: 1200 mm
Capacity: 7.7 m3/s
Power: 45 kW
4
Two pieces centrifugal blower
Manufacturer: Kreisel
Type: LRMSDE 900-Z/R 30-L1
Type: 2 opposite suction nozzles
Speed: 1475 rpm
shaft power: 174,5 kW
required motor: 200kW
volume flow: 128.300m³/h
pressure rise: 3280Pa
B7otvygy9v
density of the medium: 0,79 kg/m³
maximum temperature of the medium: 160°C
total weight: 4100 kg
No more electric motor available !!!
6
Radial Fan - Bühler 22 kW
- Volumetric air flow: 280 m³/min
- Compression: 250 mm/WS
Jajp7qol
- Drive: 22 kW, 1.470 U/min, 400 V, 50 Hz
14
rotational speed - 1470 rpm
input flange diameter - 63 cm
exit flange dimension - 48 x 60 cm;
base dimensions - 47 x 86 cm;
height - 135 cm;
weight - 650 kg;
Btyixtn
8
Manufacturer: JHM
Type: CAT630-15/D-1880
Year of construction: 2004
Output: 7,5 kW
Bg0shqgip7
RPM: 960/min
suction side diameter: 620 mm
Blower side: 110 x 700 mm
11
Only 1 piece is still for sale
Volume flow 750 m³/min (45000 m³/h) pressure increase 5600 Pa; shaft power 84,6 KW; speed 1500 rpm. with swirl control vibration damper and intake silencer. Various bends and pipes are also available.
The casing and impellers are in excellent condition.
M3onx
5
3 different types of radial fans from Bühler:
2x E45 160
- Volumetric air flow: 160 m³/min.
- Compression: 160 mmH2O
- each with a 7,5 kW motor
2x 65 M. 500
- Volumetric air flow: 325 m³/min.
- Compression: 250 mmH2O
- each with a 22 kW motor
Ncpmx
3x 45 200
- Volumetric air flow: 165 m³/min.
- Compression: 200 mmH2O
- each with a 9 kW motor
8
Manufacturer: JHM
Type: CAT630-15/D-2220
Year of construction: 2004
Bg0sz9pfj2
Output: 7,5 kW
RPM: 1450/min
suction side diameter: 620 mm
Blower side: 110 x 700 mm
6
1 piece high pressure radial blower
volume flow: 7000 m³
Total pressure increase: 10850 Pa
Speed: 2935 rpm
Temp. of Gef. medium 20°C
Shaft power 29,1 KW
Total mass: 520kg
Dimension :L;W;H 1300x1350x1200mm
diameter of impeller: 900mm
Engine: VEM KPER 200 LX2 TWS
Power: 37 KW; 380/660V; 67/38.5A IP 54
Tms2ww9l
Speed: 2940 rpm
Mass: 255 kg
6
Fan - Piller 30 kW
- Voulemtric air flow: 1,7 m³/s
Tekpckw
- Compression: 11,3 Kpa
- Drive: 30 kW, 2.960 rpm, 400 V, 50 Hz
8
Manufacturer: JHM
Type: CAT630-15/D-2220
Year of construction: 2005
Output: 7,5 kW
RPM: 1450/min
suction side diameter: 620 mm
Bg0snyo8us
Blower side: 110 x 700 mm
6
1 piece high pressure radial blower
volume flow: 3500 m³/h
V8m3ldt97
Total pressure increase: 10095 Pa
Density of the medium 1,2 kg/m³.
Temp. of the medium 20 °C
Total mass: 363 kg
Motor: VEM
Type: KPER 180 M2
Power: 22KW; 380/660V; 39.5/23A IP 55
Speed: 2935 rpm
Mass: 165 Kg