Paper Belt Filter

AME PS 150

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: 15124, The system is an AME gravity belt filter system from PS. The filter system is used for the continuous cleaning of cooling lubricants using the gravity principle. Nwjdpfjvrwwfox Aa Ejr

Condition: ready for operation (used), Year of construction: 2005, A Stopa heavy-duty high-bay racking system for panel storage is available. Total loading capacity: 51t, storage units: 17, max. storage unit load: 3t, max. panel dimensions X/Y: 1525mm/4050mm. Documentation available. On-site inspection is possible. Nwodpfxewf Nyqj Aa Eer

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP Nsdpjppyhtsfx Aa Eowr dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: good (used), Year of construction: 1992, 1,0 St. gebr. Flachschleifmaschine Hersteller: ELB Typ: SUPER - RUBIN 024 CNC Baujahr: 1992 Verfahrwege: Nsdpfx Aoi Ra Tysa Eewr Schleiflänge: 600 mm Schleifbreite: 275 mm Schleifhöhe: 375 mm Tischaufspannfläche: 900 x 300 mm Tischbelastung: 300 kg Vertikal - Vorschub: max. 300 mm/min. Quervorschub: max. 2.000 mm/min. Steuerung: UNICON Im Lieferumfang sind Schleifscheiben enthalten siehe Fotos.

Condition: good (used), Year of construction: 2008, 1 used surface grinding machine Manufacturer: Elb Type: Smart NG STC SN: 511210608 Control: Siemens, type: Simatic Multipanel Touch Magnetic clamping table, 400 x 600 mm Hydraulic table drive, table speed 2 - 30 m/min Table load on magnetic plate: 400 kg Grinding area (L/W/H): 600 x 400 x 475 mm Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle output: 4.3 kW Grinding spindle taper: 36 mm Max. vertical travel: 475 mm Max. transverse travel: 370 mm Machine weight: 3,800 kg Nwodpsv T Rhaefx Aa Esr Machine dimensions: L/W/H 2,750 x 2,050 x 2,150 mm, Electronic handwheel for Y/Z axis, Dressing unit with dressing compensation/diamond dressing, height adjustable by 22 mm, Wet grinding unit with 50 l cooling pump, 60 l automatic paper belt filter, Distance measurement in the Y/Z axis via rotary encoder

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Nwsdov Scrbjpfx Aa Eor

Condition: excellent (used), Year of construction: 2011, CNC twin-spindle turning center Control: CNC path control including 19" TFT Siemens Sinumerik 840 D sl solution line with ERGOline control and with ShopTurn 3 G TECHNICAL DATA Max. turning diameter 340 mm Spindle distance 1470 mm Turning length 1135 mm Swing over bed 700 mm Swing to tool carrier 2540 mm Travel paths: X1 – Tool carrier I 270 mm Y1 – Tool carrier I 120 mm Z1 – Tool carrier I 1200 mm X2 – Tool carrier II 195 mm Y2 – Tool carrier II 80 mm Z2 – Tool carrier II 1200 mm X3 – Counter spindle slide 180 mm Z3 – Counter spindle slide 1200 mm Main spindle Nwedpfjwcd S Njx Aa Eer Integrated spindle motor ISM 102 Drive power (100/40% duty cycle) 40/48 kW Torque (100/40% duty cycle) 570/680 Nm Speed range 0-4000 rpm Bar diameter 102 mm Draw tube inner diameter 104 mm C-axis and spindle brake (angular resolution) 0.001° Counter spindle Integrated spindle motor ISM 76 Drive power (100/40% duty cycle) 25/32 kW Torque (100/40% duty cycle) 280/380 Nm Speed range 0-5000 rpm Bar diameter 65/75 mm C-axis (angular resolution) 0.001° Slide 1 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 2 Tool carrier (direct drive) Number of tools 12 Tool holder diameter VDI (DIN 69880) 40 mm Maximum power (100/40% duty cycle) 10.9/14.2 kW Maximum torque (100/40% duty cycle) 26/34 Nm Speed range 40 – 10,000 rpm Slide 3 Rapid traverse speed X/Z axis 30/45 m/min Tool resolution Z axis 0.001° Feed force (40% duty cycle) X/Z axis 16/13 kN EQUIPMENT/ACCESSORIES  IRCO ILS-RBK 100/16 short-bar loader  Various main spindle reducers  NC-controlled workpiece retrieval device from both the main and counter spindles The device consists of an NC-controlled *Horizontal axis *Swivel unit *Vertical axis *2-jaw gripper for interchangeable gripper jaws  Conveyor belt for removing workpieces from the machine  8/20 bar coolant system with immersion cooler  Chip conveyor  Oil mist extraction  Control cabinet cooling unit (up to 40°)  Counter spindle slide  Easy-Tool monitor  1 collet chuck for quick-change clamping head size 100 for the main spindle  1 collet chuck for quick-change clamping head size 100, Nova Achsfix for the counter spindle  Approx. 40 various quick-change clamping heads size 100 (complete inventory)  Pneumatic tool changer, ø 100 mm  Approx. 50 various tool holders, fixed and driven (complete inventory)  Mounting elements  Documentation

Condition: good (used), Year of construction: 2000, operating hours: 10,000 h, functionality: fully functional, turning length: 1,105 mm, turning diameter: 610 mm, spindle speed (max.): 3,500 rpm, spindle bore: 70 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 1,137 mm, mount diameter: 63 mm, rotational speed (max.): 6,000 rpm, type of input current: AC, Equipment: rotational speed infinitely variable, The machine is in good condition. Major maintenance work in recent years: 30.04.2020: Milling spindle overhauled CHF 35,000 16.07.2021: Software update (Wenk AG) CHF 1,600 20.06.2022: Central lubrication pump replaced CHF 400 (All prices are in CHF) Known issues: - Error message during startup - Coolant from internal cooling leaks out at the rear of the milling spindle - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 different tool holders included - Spare magazine sleeves for tool magazine - Spare limit switches for tool changer position monitoring - 2 x 3-jaw chuck diameter 250 mm (mounted for inspection) - 1 x 3-jaw chuck diameter 250 mm - 1 x 3-jaw chuck diameter 300 mm - 1 x 4-jaw chuck diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Various sets of used soft jaws - Spare filters for the high-pressure system (Kowap) (5 units in stock; approx. 2 units available by delivery – 1 filter approx. CHF 20-25) - Coolant cleaning system or oil separator (custom built) Njdsxp Hmajpfx Aa Eowr - Storage cabinet customized to fit the tool magazine for KM63 holders, numbered for 80 positions - Specific clamping equipment suited for the KM63 holders, allowing direct indexable insert clamping - Iscar disc milling cutter suitable for a D160 mm holder, 4 mm width - Gear milling cutter suitable for a holder (custom built – for soft jaws, pitch = 1.5 mm) - Cleaning/deburring brush suitable for a holder We are also happy to provide leasing and financing offers for the machine. A viewing appointment can be arranged upon request.

Condition: used, Year of construction: 1969, grinding length 500 mm grinding width 200 mm workpiece height 250 mm total power requirement 5,5 kW weight of the machine ca. 2500 kg dimensions of the machine ca. m J U N G Horizontal High Precision Surface- and Profile Grinding Machine Model HF 50 RD, Year 1969, partially reconditioned in 2021 Serial-no. 4082 _____ Grinding length max. 500 mm Grinding width max. 200 mm Table size 600 x 200 mm Grinding height under grinding wheel approx. 250 mm Table cross travel approx.. 230 mm Table slide cross stroke 0,2 - 8 mm/table stroke Table longitudinal travel max.. 550 mm Table speed longitudinal 1 – 20 m/min. Measurement of grinding wheel 225 x 25 x 51 mm Grinding wheel speed infinitely adjustable 1.000 - 4.500 rpm Vertical feed 0.001 - 0.01 mm/stroke Grinding spindle drive infinitely variable load 0,4 – 1,5 kW Total electrical load 5,5 kW - 380 V – 50 cycles Weight approx. 2.500 kg Accessories/Special Features: • Due to the infinitely variable speed range of the grinding wheel this design is especially suited for grinding of high alloyed steels and carbide, hardmetal, etc. • Set up switches for plunge-in or normal pendular-grinding with automatic infeed • Automatic infeed of grinding slide during surface- and/or profile grinding, (plunge-in cut)with automatic stop of infeed by contact-Gauge. • motorized rapid feed of grinding head up/down • Manual straight grinding wheel-dressing device mounted above the grinding wheel • Manual Table mounted, swivable magnetic chuck make BRAILLON size 400 x 200 mm • separate converter cabinet for infinitely variable speed regulation and with respective display of cutting speed in m/sec. • Wet grinding facility including coolant tank and bandfilter cleaning device, separate standing, • Including 3 separate flanges, some grinding wheels, service tools, etc. Condition : good – can be inspected here under power, partially reconditioned by a JUNG Specialist (table pistons, lubrication, infeed system, Dresser, covers, etc.) Delivery : ex stock – as inspected Nodpst Hwziefx Aa Eowr Payment : net– after completion of contract

Condition: excellent (used), Year of construction: 2018, operating hours: 100 h, We specialize in the remanufacturing of blowers, compressors, and vacuum pumps. We service equipment from manufacturers such as: Aerzen, Kaeser, Atlas Copco, Robuschi, Busch, and Tuthill. We also offer blowers and compressors for rental. We operate throughout Europe and beyond. Nsdpfsn Tntqox Aa Eewr