Used Filtration Device for sale (12,722)

Condition: used, DAF Plant Comprising of: - DAF plant white water system Chemical dosing Polymer mixing Air compressors and control system. Feed pumps and blower available if required. Dedoy Au Arepfx Aqvokn *Drawings available* Located in Bristol, UK (Buyer to remove)

Year of construction: 2015, condition: excellent (used), functionality: fully functional, Carlson Filtration Type FZ164 Filter Housing P/N: 5052164040 Diameter: 16"x4 Volume: 191L Year: 2015 Pressure PS: 0-8 Test Pressure: 11.5Bar Fluid Group: 1 and 2 316L 4 pieces available Dodpfxeyq Ryhs Aqvekn Carlson housings modified for Pall SUPRAPak modules. Parts are still there to return to original set up

Condition: good (used), Year of construction: 1999, The filtration system is used to filter oil (rapeseed, sunflower, soybean oilseeds and others). The system is made to work automatically, it has a command unit that manages the pneumatic valves, and with the help of sensors it controls and manages the work. The system includes a control unit, a piping system with fittings and valves, and a SS filter body. Dedpfx Aotxc Hpjqvekn Automatization is completely new and never used!

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. Dkedpfxsr A El Ee Aqvsn "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: used, Year of construction: 2009, Overview  This oil separator was manufactured in 2009 by the German company Donaldson Filtration GmbH. The UFA-AC0016M model was part of a compressed air installation operating with two Atlas Copco GA132 VSD low-pressure compressors. The unit is still installed and connected, has been maintained regularly, with the latest maintenance completed in August 2025, and is immediately available for sale. It can be visited on request. Technical data  Air operating pressure: 5.5 – 8.5 bar Water operating pressure: 3 – 5 bar Condensate operating pressure: up to 10 bar Operating temperature: 4 – 70 °C Dedpfx Aeyb Th Asqvokn

Condition: good (used), Image processing control unit, camera control -Manufacturer: Vision Device, camera controller for 2 cameras -Type: unfortunately no further type designation -Individual components/connectors: see photos Djdpfx Aoxvp S Ejqvekn -Dimensions: 200/145/H110 mm -Weight: 1.4 kg

Condition: like new (used), Device for cleaning die-cut sheets German production, Metabo. 230V power supply. Easy-to-use, manual device for removing external waste from the pallets of die-cut sheets. Safe, two-handed operation of the device. Dksdpfx Ajwyxi Rsqvjn

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, input frequency: 50 Hz, Complete Fuel Polishing & Storage System – 130,000 L Capacity Available for immediate decommissioning from a data centre: a fully equipped fuel storage and polishing system designed for reliable diesel generator operation. Main Components: Fuel Transfer Pumps (x4) Independently controlled via front-panel PLC Dkodpfx Aqjw Hdg Uevsn Operational indicators and flow meters (L/h) Filtration Units (Filtertechnik) High-efficiency diesel filtration skids Integrated monitoring and alarm panels (differential pressure, overload, emergency stop) Electrical Control Panels Manual/automatic operation modes System status and fault indicators (low flow, bypass, pre-alarm) Emergency stop functionality Underground Diesel Storage Tanks (x4) Total capacity 130,000 litres Connected via reinforced piping and fuel supply lines Fuel Pipework & Monitoring High-grade piping with safety valves and pressure sensors (Barksdale, Pyropress) Designed for safe and precise operation External Housing – Fuel Pump Room Weather-resistant metal cabin with safety signage (“Highly Flammable”) Internal insulation for added protection This system is ideal for data centres, industrial facilities, or any large-scale diesel generator installations, offering high reliability, complete monitoring, and easy relocation.

Condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: PEMA, swiveling, hydraulically height-adjustable welding rotator Dedpfszbutaex Aqvjkn -Type: 1500AHM -Load capacity: 15000 N -Control: with remote control -Base plate: Ø 850 mm -Speed: 0.02 - 1.6 rpm Right/Left rotation -tiltable: hydraulically -Height adjustment: hydraulic -Transport dimensions: 850/1650/H970 mm -Weight: 820 kg

Condition: good (used), Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, roller stand rotating device -Roller stand: Container rotator without drive, 2 pieces -Roller spacing: 220 mm -Rollers: Ø 185 x 117 mm -Load capacity: kg Djdpezbrqpsfx Aqvjkn -Dimensions each: 1070/200/H240 mm -Submission/Price: complete -Transport dimensions: 1070/410/H240 mm -Weight: 265 kg

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. High extraction capacity with low space requirement Maximum performance in this class Very quiet Range of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with corresponding extraction nozzle diameter Can also be used for several dust sources High-quality, sophisticated construction Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, thus flexible in use Large inspection openings Large-dimensioned, mobile spill container with clamp and spill collection bag unit already completely assembled at delivery, therefore quickly usable mobile Description of the filter Ultra compact with maximum filter area Filter material made of polyester fleece, aluminized, washable and therefore with long service life Dedpocnw U Dsfx Aqvekn Filter standard in antistatic design tested and approved according to category M-BIA Filter resistance monitoring via differential pressure box, adjustable with warning lamp on the control box The fan is connected downstream of the filter Equipment details: With innovative locking device for safe container positioning All units of this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan wheel Inspection opening

Condition: new, Year of construction: 2025, Description: IE 3 motor standard max. volume flow up to 8.500 m³/h at the fan approx. 73 m² filter surface, residual dust content according to H3 Pre-separator standard 71 dB (A) at full load (according to DIN EN ISO 11201) already complies with prEN 16770 Optional: Models with type-tested rotary valve (FSA) Tested back pressure flap Integrated automatic venting system Intake port: 350 mm Nominal motor power: 11 KW Voltage: 400 V/ 50 HZ Max. volume flow: 8500 m3/h Nominal volume flow: 6927 m3/h Negative pressure at Vnom. 2765 Pa Filter area: 73 m2 Spa collection volume: (net/gross) 3x165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dedecqy I Sepfx Aqvjkn Dimensions (LxWxH) 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock 54634 Bitburg

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Dkedpfxoy A Tpqj Aqvsn Good condition Location: in stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Al-Ko clean air dust extractor year 2024 Exhibition piece - Djdpfocdy I Rox Aqvokn Immediately available Absolute special price Technical data Power Unit 250 P Intake manifold: 250 mm Rated motor power: 6.5 kW / 3 Ph Voltage: 400 V / 50 Hz Max. volume flow: 4900 m³ / h Nominal volume flow: 3524 m³ / h Negative pressure: 2451 Pa Filter surface: 22.4 m² Sink collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: ex stock 54634 Bitburg

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. Dsdpfx Aqscnw T Iovskn All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: good (used), Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis Dsdpfx Asv Uwlneqvskn -Drive motor: 0.55 kW / adjustment motor 0.085 kW -Load capacity: 5000 kg -Roller spacing: 270 - 870 mm, rollers Ø 230 x 150 mm total width -Unwinding speed: 0.025 to 1.0 m/min Right/left rotation, Left rotation only continuous operation -Control unit: with hand control and foot pedal -Rail width: internal dimension 940 mm -Individual components: see photos -Transport dimensions: 1020/1020/H635 mm / 1020/500/H635 mm / 600/480/H955 mm -Total weight: 844 kg

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Included in delivery are: 01x slide-through protection, used Material color: hot-dip galvanized total length: approx. 2.700 mm U-profile: 50 x 50 mm Dedoh T Uwvepfx Aqvekn Agraffe dim.: 335 x 50 mm (HxW) 04x hexagon head screw: M10 x 35 mm 04x Toothed nut: M10 08x washers: M10 Further information: System: SSI Schaefer for type designation: PR350/400 designed for double rack rows suitable f. clear width: approx. 2.700 mm General information about the article: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which are separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, thread cutting apparatus -Manufacturer: Edalco, Thread cutting attachment with slip clutch -Type: Edalmatic EDM-R 1030 Dsdoza Tgcepfx Aqvokn -Thread cutting sizes: M10 - M30 -Integrated reversing gearbox: with rapid return -Recording: MK5 -Tap chuck: Ø 22 mm -Dimensions: Ø 123 x 475 mm -Weight: 9 kg

Condition: excellent (used), Collet set MK 4 Dkedpfx Ajupzbljqvsn Make Horma 17 pieces from 4-25 mm in diameter (28562) in carrying case

Condition: used, Year of construction: 1998, liter capacity 250 l/min conveying height ca. 2 m coolant capacity 500 l total power requirement 16 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 2,0 x 0,8 x 1,6 m Used mobil filter system for cleaning of coolant - take the dirty coolant out of the machine Dkedpozawgyjfx Aqvsn - clean the fluid with a band filter - use the 500 l tank - take cleaned cooland back to the tool machine - or use the high pressur gun to clean up the machine

Year of construction: 1990, condition: used, Used to work with multi-spindle automats Precoat filter oil 2.100 l/min Dedpsw T Tn Hjfx Aqvjkn *

Year of construction: 2009, condition: used, KSS/filter/cooling systems Emulsion Dedpfow Tbnujx Aqvjkn *

Condition: used, Vibratory spiral conveyor / sorting device / spiral conveyor / vibratory conveyor RNA Vibratory bowl, sorting device / screw feeder with vibratory conveyor for screw technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: presumably SRC-N 250-2R Year of manufacture: approx. 2000 Bowl diameter (bottom): 250 mm Bowl diameter (top): 380 mm Bowl internal height: approx. 90 mm Sorting track width: 30 mm Overall height (drive + bowl with sorting track): 405 mm Oscillation frequency: 100 Hz / 6000 min-1 Mains connection: 230 volts, 50 Hz - Control unit RNA, type ESG 90 for adjustable vibration speed - Vibratory bowl with rubber coating - The conveyor was used for feeding automotive fuses Space requirement Ø x H: 430 x 405 mm Dodpfx Aozbhuqjqvekn Weight: 38 kg Good condition A spiral conveyor always consists of two essential components. 1) Sorting bowl, in which the parts are aligned 2) Drive, which generates vibrations in the sorting bowl through mechanical oscillations and thus sets the parts in motion.

Condition: good (used), functionality: fully functional, type of input current: three-phase, input voltage: 400 V, volume flow: 2,400 m³/h, overall weight: 30 kg, power: 0.37 kW (0.50 HP), noise level: 67 dB, MAKRA oil mist collector system Technical characteristics: Supply voltage: 400 [V] Weight: 30 [Kg] Dkodpfx Aqoxxihljvon Air volume: 2400 [m³/h] Cycle: 50 [Hz] Installed power: 0.37 [kW] Noise level: 67 [dB] Machine visible in our premises by appointment. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed.

Condition: good (used), Welding device, welding robot -Welding device: for plates that are to be welded at an angle -with: travel distance adjustment (limit switch) -pneumatic: material clamping (angle) -Welding speed: adjustable Dsdpfx Aqsb A Hrlsvekn -without: MIG/MAG welding machine