Used extruders & extrusion lines for sale (218)

Year of construction: 2002, condition: excellent (used), SAW KUAG CUT 110 for PP , PE or PVC PIPE Cedpfx Aju D Udwobbehf With central pipe fixation Cutting and Chamfering without sawdust Cutting with a cutting roller/Circular knife or cutting steel and Carbide insert Min. Pipe diameter 20 mm, Max Pipe diameter 110 mm Year of construction: 2002 Condition: very good Hablamos español Nous parlons français We speak English

Year of construction: 1970, condition: ready for operation (used), A complete extrusion line with a Reifenhäuser extruder and a gravimetric system Plast-Control (2006) is available. 1) Unwinder 1. 2) Primer unit and hotmelt unit for water-based adhesive lamination. 3) Dryer. 4) Unwinder 2. 5) Dolci extruder for extrusion lamination. 6) Unwinder 3. 7) Two printing units with additional dryer. 8) Extruder Reifenhäuser. 9) Rewinder. 10) Guide roller in the basement. 11) Web guiding under unwinder 1 in the basement. 12) 2x resin silos in the basement. This is a complete extrusion line with peripheral equipment. Documentation available. An on-site inspection is possible. Chsdpfxsw R Dhrs Abbjf

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 Chedpfx Aouak Nlebbef - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: F96172.1, power: 57 kW (77.50 HP), input voltage: 400 V, Equipment: documentation/manual, I am selling a Paul Muller ELK 60-28 D extruder. We produced PVC material on the extruder. The chamber and screw are in very good condition. The machine did not show any problems during production; production was consistently within a 0.2mm tolerance. The machine is currently disconnected and stored in an air-conditioned warehouse. Cjdjxm Sbkspfx Abbjhf

Year of construction: 2001, operating hours: 64,499 h, condition: good (used), Conical screws, approx. 110 kg/h. A.C. motor 30.0 kW. New motor, 64,499 operating hours. Cedpew Hy Uusfx Abbohf

Year of construction: 2000, condition: refurbished (used), • Manufacturer: SICA • Type : C800 • Year : 2000 • 6 caterpillar • Up to 800mm • Motor power : 8,5kW • Great condition Cjdpfx Ajix I I Isbbehf

Year of construction: 2002, condition: excellent (used), KUAG PIPE-HAUL-OFF 160/3 CATERPILLAR Year of construction: 2002 Caterpillars: 3 with synchronous drive Diameter: Min 40mm Max 160mm Take-off speed: 0.2 - 15 m/min Condition: Very good operational Sachal Extrusionsmaschinen Codpfx Abjwki Dysbehf D-26345 Bockhorn-Grabstede Germany

Year of construction: 2000, condition: used, Rotational speed: 227/min, power: 31kW, heating output: 7.8kW, length: 1952mm, width: 840mm, height: 1920mm, weight: 820kg. Chjdpoduyyzjfx Abbef

Condition: used, Year of construction: 1970, functionality: fully functional, BARMAG extrusion system consisting of: 1x BARMAG BA KEP 90-26.3-S extruder 1x BARMAG 9E4-11-103/Z transmission gear 1x AEG G 16.04 drive motor with forced ventilation, 460V, 112A, 46.7KW, 3150rpm, rated at 330V, 2.21A 1x SCHOLZ dosing unit, incl. Feed hopper 1x Control unit System features: - Single-screw extruder, built around 1970 - Throughput 200 kg/h - Conversion to new screw geometry in 2016 - Screw diameter 90 mm - Screw length 2769.5 mm - Process length 26.3D - Geometry: Feed - Barrier - Mixing section - Screw material: 1.8550, nitrided - DC motor - Technical documentation This system is available in three versions. Subject to prior sale. Please send inquiries via email only. Note: The machine is still installed and can be inspected on site. Chsdpfx Abeuakzzobef The buyer must dismantle it and arrange shipping themselves. This is not included in the offer price.

Year of construction: 1994, condition: good (used), Max reel diameter 1600mm Cedsp Du A Tspfx Abbehf Die gap 1.25-2.26 Die diameter 350mm Thickness 25-130 micron Speed 250kg/hr

Year of construction: 1999, condition: used, functionality: fully functional, machine/vehicle number: 99031, DD Motor 27.9KW; 2655 RPM Automatic feeding system MAAG gear Pump; Type: EXTREX EX 28 - 4STE with control system MAAG; Type: MAAX 5 Input and Output pressure sensors (up to 350 Bar) on the gear pump Possibility to add Inox tank 2m length * 0.45m width with possibility to apply calibration system: - Equipped with vacuum pump, 8 exits vacuum collector and cooling collector with 8 exits. Chedpfx Abswqrprobef - Manual adjustments: right/left, up/down, forward/backwards

Year of construction: 1997, operating hours: 31,850 h, condition: good (used), Conical twin screw extruder - Manufacturer: CINCINNATI Chodpfx Abjv D Nzmsbof - Type: Titan 45 - Conical screws Ø45mm - Year: 1997 - 31850 operating hours - Engine power: 15kW - Flow rate: 120kg/h - Replacement motor - Replacement vacuum pump - Replacement material feed screw

Condition: excellent (used), Year of construction: 1995, HEIN TVP 160 Pipe Saw Year of Manufacture: 1995 With chipping jaws Application: Cutting and beveling PE, PP, and PVC pipes: Smallest diameter 30 mm Largest diameter 160 mm Cedovwm N Uspfx Abbohf Also suitable for short lengths starting at 10 cm Condition: The pipe saw is in working order. The saw is my property. Location: Sachal Extrusionsmaschinen, Bahnhofstr. 6 D-26345 Bockhorn-Grabstede, Germany

Year of construction: 2013, condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 145mm, L/D ratio: 42, extrusion capacity: 700kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/609kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. Chedpfx Asv Ip S Hjbbsf

Year of construction: 2017, condition: as good as new (ex-display), • Technical products + speed control Csdpfx Ajvzq R Rjbbehf • Suitable for pipes from 4.5 up to 25 mm OD

Condition: used, Year of construction: 2005, Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulate Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 µm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi’s; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET internal cooling system Air ring: Karat, with 3 air inlets, 45 segments (valves), with integrated thickness control Air ring blower: YES Thermoregulation chiller: YES (Eurochiller) Bubble cage: YES; rollers with silicone cover; motorized electronic control; secondary cage with motorized open/close and adjustment Thickness control: K design (Karat, Kundig K-150); contact system integrated with air ring Collapsing frame: Free aluminum rollers Rotation: Nip roller 1800 mm (max film width 1700 mm); motorized open/close; speed control motor; other free rollers in aluminum; 2 ceramic air rollers for cooling Water-cooled rollers after nip roller: / Film centering: 2 ultrasonic sensors (Five) Corona treatment (double-sided): YES (F&B); above winders; 8 kW generator; ozone extractor and film detector; 10 mm electrode width Cjdpfxew Nhavo Abbjhf Winders: Back-to-bac Winder model: Model BO; nip roller 1800 mm (max film width 1700 mm); manual shaft placement; max roll diameter 1000 mm; trim and multiple output rolls; film tension and winding control; 2 banana rollers; ‘flying knife’ (new Origa knife installed a few years ago); electric panel included Shafts: 4 x 76 mm and 4 x 152 mm Trim suction: YES; includes Supergrillo regranulation system Frame construction: YES Installed power: Approx. 150–200 kW (400 V, 3-phase

Year of construction: 2000, condition: refurbished (used), machine/vehicle number: 19018, KREYENBORG DOUBLE SCREEN CHANGER K-SWE-101/121/RS Year of construction 07.2000 With accessories: Various perforated disks, sieves etc. The screen changer was overhauled by NORDSON General for € 18,000 Application: 2-layer extrusion or single operation Chjdpfx Asufgfgebbsf

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Cjdpfx Asv Uz Awjbbshf

Condition: used, Year of construction: 1994, Film width: 1500 mm Thickness range: 25-200 Dosing system: Summit Garvimetric Screw: 90 mm Heating zones: 5 Heating power: 64 kWt approx. Driving system: D.C.11-110 KW Power: 415 Die head: fixed Diameter die head: 350mm Diameter of the gap: 1.25 to 2.25 IBC – yes Air ring type: optifil Die lip gap diameter: 2-50 Calibrating basket: yes with Ultrasonic control Motorized adjusting of calibrating basket in diameter / high: yes Take-off system: Oscillating Number of rolls: 2 Csdjwgcw Sspfx Abbjhf Web guiding system: Yes Final roll width: 1650 mm Final roll diameter: 1000 mm Final roll maximum weight: 1 t Rewinder speed: 100 Thickness Control System: Optifil Micro perforator: no Filter changer: Yes(hydraulic) Electrical requirements: 400 A PLC: Siemens Simatic S5-100 U Trim removal system: Rollers Yes-Extract No

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Year of manufacture: 1999 Little used Condition: Very good, needs cleaning Codpfx Ajvy It Tebbohf With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Year of construction: 1990, condition: ready for operation (used), A total of three extruders including throughput measurements (scales), as-new barrels (2018) and overhauled screws are available. Total extrusion capacity: approx. 100kg/h. 1) DC smoothbore extruder, output: 17kW, machine dimensions X/Y/Z: approx. 2300mm/600mm/1100mm. 2) DC smooth tube extruder, power: 32kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. 3) DC grooved barrel extruder, output: 49kW, machine dimensions X/Y/Z: approx. 3000mm/700mm/1200mm. On-site inspection is possible. Chodpfsvw Aqhjx Abbof

Year of construction: 2014, condition: ready for operation (used), A complete Artec recycling and extrusion line is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, screw diameter: 125mm, L/D ratio: 42, extrusion capacity: 650kg/h, degassing: 2-fold, shredder/extruder/screen changer output: 55kW/512kW/55kW. Total plant dimensions X/Y/Z: approx. 20700mm/3000mm/3400mm, control system: Siemens. Including shredder, conveying units, storage and mixing silo, feed belt, extruder, vacuum pump, melt filter, hot granulating cut-off, bag filling and weighing station and bagging station. Documentation available. On-site inspection is possible. The system has extensively documented defects. Codpfxov Ip Syo Abbjhf

Year of construction: 2011, condition: ready for operation (used), Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories. Cjdpfxshtvmhj Abbjhf

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Codpfx Ashz Dyaobbohf

Year of construction: 1979, condition: ready for operation (used), Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly. Chsdpfolp N Evsx Abbef