Nitrogen generator

Airtech Stickstoff GmbH Parker n2-20-80

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 24, number of axes: 3, This 3-axis HAAS VF-2SS-EU was manufactured in 2018. It features an impressive X-axis travel of 762 mm, Y-axis travel of 406 mm, and Z-axis travel of 508 mm. The machine is equipped with a side mount tool changer with a capacity for approximately 24 tools and a spindle speed of up to 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS-EU vertical machining center we have for sale. Contact us for further details. • Country of origin: USA • Certification: CE • Electrical: 440 V, 3 phase, 50/60 Hz • Full load current: 33 A • Maximum load current: 33 A • Short circuit capacity: 10,000 A • Software version: 100.19.000.1123 • Power on time: 1,056 h • Tool changes: 32,413 • Included machine equipment: coolant system, wash gun, LED work light, fully enclosed working area • Condition: very good condition, low operating hours, well maintained Gjdpfsywv Tnox Aaxsbl Additional equipment • Machine vise • Touch probe Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2019, functionality: unexamined, machine/vehicle number: 10021711, overall weight: 1,400 kg, load capacity: 210 kg, controller manufacturer: KUKA, controller model: KRC 4, 1. Robot Arm • Manufacturer: KUKA Deutschland GmbH • Type: KR 210 R3100 Ultra (KR210R3100 ULTRA C4 FLR) • Item number: 10021711 • Serial number: 1239324 • Year of manufacture: 04/2019 • Weight: 1154 kg • Payload: 210 kg • Reach: 3096 mm • Country of origin: Germany 2. Robot Controller • Type: VKR C4 • Item number: 1106074 • Serial number: 3007941 • Year of manufacture: 10/2019 • Weight: 168 kg • Supply voltage: 3x400V • Mains frequency: 50/60 Hz • Full load current: 22 A • Mains fuse: 25 A • Country of origin: Hungary 3. Extraction system • Manufacturer: ESTA Apparatebau GmbH & Co. KG • Type: Small Dust Collector OM-8 • Serial Number: 19002523 • Year of Manufacture: 2019 • Voltage: 400 V • Power: 0.55 kW • Current Consumption: 1.4 A • Noise Level: 10A [dBA] • Volume Flow (Max.): 600 m³/h • Weight: 60 kg • Protection Class: IP44 Gsdpfx Aov Tyw Djaxjbl • Max. Negative Pressure: 1600 Pa • Country of Origin: Germany 4. Equipment & Special Features • Teach panel with connection cable (visible in the control cabinet) • External electrical/control cabinet installation with Ethernet and safety connections (typical for KUKA) • Additional attachment mounted on the robot flange, for special applications (e.g. B. Grinding or deburring applications) • Base for stationary floor mounting • Control and power cables pre-assembled and integrated • System is stored on pallets and ready for transport

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Gbsdpfx Aeiyyf Ioaxsl Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, TruLaser 3030 L81 – FIBER 4000W Laser on: approx. 13,300 h Machine on: approx. 26,300 h Gbedpfx Aeyxc D Asaxol

Year of construction: 2008, condition: ready for operation (used), Sanding range: 2000x900mm, transverse movement: 875mm, longitudinal movement: 2450mm, distance table to spindle center: 845mm, magnetic clamping plate dimensions: 2000x800mm, max. table load: 2.3t, feed rate longitudinal axis: 1000-30. 000mm/min, feed transverse axis: 0,01-2000mm/min, feed vertical axis: 0,001-1500mm/min, grinding wheel dimensions: 500x100x203,2mm, power grinding spindle motor: 22kW, length: 6800mm, width: 3450mm, weight: 13t. On-site inspection is possible. Gsdpfx Asuyk N Ioaxobl

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,327 h, travel distance X-axis: 762 mm, spindle speed (max.): 12,000 rpm, number of axes: 3, This 3-axis HAAS VF-2SS was manufactured in 2014. It features advanced capabilities including tool measuring and a probe for enhanced precision. With a feed cutting time of 5327 hours, this vertical machining centre is designed for efficient operations. If you are looking to get high-quality machining capabilities, consider the HAAS VF-2SS machine we have for sale. Contact us for further details. • IKZ • Probe • Tool measuring • Axis configuration: 3 axes (X/Y/Z) • Frequency: 50 / 60 Hz • Short circuit interrupting capacity: 10,000 A • Short circuit current: 5,000 A RMS symmetrical Gbsdpfx Asyux Saoaxel • Arc flash rating: • 208-240 VAC models: HRC-1 • 360-480 VAC models: HRC-2 • Feed cutting time: 5327 h

Condition: good (used), Loypack One shot chocolate depositor Gjdpfjmqm E Ujx Aaxsbl Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Condition: new, Year of construction: 2025, Pressure blasting cabin DSK 11.11.30. Blasting chamber W=1050 D=1050 H=955mm. 1 TÜV-tested pressure vessel 30l with conical outlet funnel. 1 blasting medium dosing valve with blasting medium quantity regulation pneumatically controlled. 1 built-in closing cone with guide tube. 1 compressed air connection with pneumat. Shut-off valve and branch for control air. 1 pressure regulator to adjust the blasting pressure. 1 blasting hose DN19. 1 handpiece with boron carbide blasting nozzle Venturi 8mm. 1 pair of blasting gloves. Electrical height adjustment of the cabin for body-friendly posture. Memory position storage for 3 heights. Dust extraction filter 2000m³/h 2,2kW. Gsdega Ehbopfx Aaxobl

Condition: used, Grindermak 150-06 Grindermak 150-06 New Punch press tool grinder based on the Amada Togu CNC grinder Grindermak 150 06 / For sale Table Stroke/movement 180mm Distance between table and wheel (max) 230mm Z movement 0,0001-20mm Cutting wheel Diameter (max) 150mm Gbedpfx Ajfuakcsaxsl Cutting wheel rotation 3400 D/dk Cutting wheel power 1,1kw-3000 D/dk Stroke engine (z) 400W Complete with touch screen. In stock. Amada Togu / Trumpf quick sharp type grinder / Quick grind / Quick set / Quick load/

Condition: new, Year of construction: 2026, table length Rohmateriallänge 6500 mm table width Rohrdurchmesser max. 230 mm burner heads 1 Control CNC workpiece weight 300 kg traversing speed 91 m/min weight 5750 kg dimensions of the machine ca. 12900 x 2370 x 2650 mm Tube laser with T-loader Configuration 1. Bodor Power laser source 6 KW Gbjdpfewh Uldjx Aaxsl 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of jaw clamping force 6. Follow-up servo blanking clamp 7. Support for composite clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous jet nozzle 14. Intelligent maintenance reminder 15. WIFI internet connection 16. Water cooler 17. Extraction system 18. Wear parts set 19. Auxiliary feeding device T-Loader: - One-click adjustment - Material shortage alarm - Automatic loading - Scratch-resistant tube - Host safety lock - Tube size range: Round tube 20 - 220 mm Square tube 20 - 220 mm Rectangular tube 220 mm = side length = 20 mm - Maximum tube weight: 300 kg - Pipe loading length range: 4500 mm-6500 mm - Maximum loading weight: 1800 kg CUTTING CAPACITY: STRUCTURAL STEEL 16 mm STAINLESS STEEL 12 mm ALUMINUM 10 mm WALL THICKNESS STRUCTURAL STEEL* (mm) If DM < 50: WS = 1.2 If DM = 50: WS = 2.5% × DM Max. finished part length 4500 mm OPTIONAL: LANTEK FLEX3D TUBES PLUS