Used exhaust systems for sale (70)

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² Iodpfx Agehp S Tro Dsa 72 dB(A) 400/50 V/Hz 665 x 1100 x 1495 mm 200 kg - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Pre-filter: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the Cartmaster IFA type is thanks to the automatic Cleaning particularly suitable for welding work with unalloyed and alloyed steels, galvanized material and aluminum with heavy smoke development. It corresponds to the safety requirements for devices Welding fume class "W3" (high-alloy steels with alloy components > 30% Nickel-based alloy).If used as intended, the system can be used for the Recirculation mode used because the requirements for the Exceptions according to TRGS 560 are fulfilled. That special developed, dirt-dependent cleaning system ensures a good cleaning behavior of the filter cartridge, so that an optimal suction performance is guaranteed throughout the operation. The cleaned particles fall into a dust collection drawer from which they can then be disposed of. The powerful spiral fan ensures even with saturated Filter cartridges for a high volume flow. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: used, Year of construction: 1993, Technical details: motor capacity: 7,5 kW revolution per minute: 2860 U/min extraction suction socket - diameter: 200 mm electrics - voltage/frequency: 380 V/Hz weight of the machine approx.: 235 kg Isdpfeu Nu Exex Ag Dsa dimension machine xH: 1,0x1,0x1,65 m Dust Suction Device - impeller Dm = 600x160mm - impeller = 360mm Intake: - intake conical dia = 250x200x200mm - collar dia = 250mm Exhaust opening: - dia = 250mm; Collar dia = 310mm Accessories: - 3x wall clamps dia = 140mm - 90 ° arc dia = 250x600mm - 1x spare belts 15x1500mm *

Condition: used, Year of construction: 2015, air flow quantity 1800 m³/h suction power 1,275 kPa power capacity 1,5 kW weight ca. 125 kg Dimensions (HxWxD) 2,0 x 1,15 x 0,67 m Isdpjvvxr Sofx Ag Doa One used oil dust collector - Produced in 53809 Ruppichteroth/ GERMANY - 3,13 A/ 50 Hz - 3AC 400 PE

Condition: excellent (used), Year of construction: 2022, operating hours: 9 h, functionality: fully functional, machine/vehicle number: 22001476, input voltage: 230 V, overall weight: 115 kg, total width: 684 mm, total length: 692 mm, total height: 1,441 mm, volume flow: 950 m³/h, filter area: 1.2 m², power: 0.51 kW (0.69 HP), input frequency: 60 Hz, Equipment: documentation/manual, type plate available, ESTA Table Box Active Mobile Odor Filter Airbox / Extraction Device / Extraction System - Mobile single workstation extraction unit with energy-efficient fan and activated carbon filter for capturing gaseous and fume pollutants - The extraction system currently has only 9 operating hours - Extraction table with GRP grating (robust, corrosion-free, gentle on materials) - Additional hood made from corrosion-free aluminum sheet for improved capture of localized emissions on the grating Ijdpfx Agjwbfkds Dsa The extraction system is intended for extracting gaseous environmental pollutants, such as smoke, for example. ATEX classification not available, not Ex-protected All technical specifications are subject to errors/typing mistakes. Price on request Sale exclusively to EU countries.

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm Iedpfx Agsw Nhbms Dea -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Condition: excellent (used), Year of construction: 2013, Centrifugal oil mist filter system Losma type Darwin 1200 Capacity 1200 m³ per hour Iedpfswrt Ifjx Ag Doa Several units in stock

Condition: new, 1860 m³/h Pressung 2.900 Pa 1,1 kW filter surface area 10 m² 72 dB(A) 400/50 V/Hz 665 x 820 x 1365 mm 165 kg mobile extraction, welding fume extraction (manual cleaning by loss of pressure) - Hose arm 3 m, joints inside - Filter cartridge: dust class M - Particle pre-separator: baffle plate - Current type: 3Ph+N+PE The filter system ----- The mobile filter system of the type StrongMaster IFA is particularly suitable for Welding work with unalloyed and alloyed steels, galvanized material and Aluminum in case of heavy smoke development. She corresponds to the Safety requirements for devices in the welding fume class "W3" (high-alloy steels with alloy components > 30% nickel-based alloy). When used as intended, the system can be used for be used in the recirculation mode, since the requirements for the Isdpfx Agskm Ryns Dja Exceptions according to TRGS 560 are fulfilled. The filter will via a maintenance door using a compressed air gun from the clean air side cleaned. The cleaned particles fall into a dust collection drawer from the they can then be disposed of. The powerful scroll fan ensures a high volume flow even with saturated filter cartridges. The filter media ----- A baffle serves as a pre-separator for coarse particles. The filter cartridge installed below (dust class M, degree of separation > 99%) filters the finest smoke and dust particles. The cartridge is factory coated which increases the service life. The extraction arm ----- The extraction arm can be moved with the 3 internal joints Position spring support slightly and is in the set position cantilevered. A throttle flap integrated in the extraction hood enables the Flow rate setting.

Condition: used, Year of construction: 2008, Technical details: filter cartridge type: mechanisch air flow rate: Nenn-Volumen: 1.330 m³/h air flow rate: min.-Volumen: 1.108 m³/h total power requirement: 3 kW Ijdpfx Agou Nv Dce Dsa weight of the machine approx.: ca. 270 kg dimension machine xH: 1,7 x 0,78 x 2,0 m Industrial extraction system Sheet steel housing Can also be used for combustible dusts Dust extractor size Ø 580 x 1000mm, pipe connection Ø 160 x 60mm; mechanical filter Bar container size Ø 580 x 550mm; with an inspection window, with 4 wheels, 2x of which can be swiveled and braked *

Condition: good (used), Year of construction: 2018, power: 0.55 kW (0.75 HP), AR Filtrazioni ARF 700 YB air purifier, built in 2018. The ARF series is designed for the extraction and purification of micro-dust and fumes generated during dry/wet processing. The incoming air first passes through a metal filter sequence and a synthetic filter, which traps larger particles. In the next phase, the air is passed through a very high-performance HEPA filter (H13) in accordance with the European standard EN 1822, before being released back into the environment completely clean. Dimensions: 460 x 500 mm, H 1,050 mm Weight: 80 kg Flow rate: 700 m³/h Ijdov T Db Tspfx Ag Dsa Connection: 100 mm #8347

Condition: used, Year of construction: 2009, type of input current: three-phase, overall weight: 200 kg, suction capacity: 2,000 m³/h, filter area: 10 m², negative pressure: 2,300 Pa, Equipment: documentation/manual, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum for sandblasting, soda blasting, shot blasting and for all types of dry dust. Brand: Pionier Model: Entstauber PF-2B The filter is cleaned with compressed air pulses during operation, ensuring high device efficiency. Fan located on the clean side, minimizing explosion risk. Specifications: Capacity: 2000 m3/h Vacuum: 2300 Pa Filter surface area: 10 m2 Cartridge filter element. Motor power: 1.5 kW Isdpfx Agjxnmw No Dsa Inlet diameter: 180 mm HEPA filter, filtration class H13 Year of manufacture: 2009 Stock number: 1057

Condition: used, Year of construction: 2022, machine/vehicle number: SN00015, 12 months warranty, except for the engine. Light signs of use. Iedpfx Ajw H R Tqog Dsa

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 / H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH * Depending on the filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for small to medium-sized machine workrooms. Your advantages: Iodpfeh Rynqjx Ag Dja - Compact dimensions - High-efficiency EC fan as standard - Adjustable speed and air output (optional) - Washable pre-filter - H13 particulate air filter separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON-series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 1400/1995/H2100 mm -Shaking motor: 0.25 kW -Funnel frame: 1400/1995/H2350 mm -Opening: Ø 500 mm / 500 x 220 mm -Individual components: see photos -Weight: 220 kg / 521 kg Isdpfx Agow Hz T So Dsa

Condition: used, Technical details: filter cartridge type: mechanisch air flow rate: 1.330 m³/h total power requirement: 40 kW weight of the machine approx.: ca. 300 kg Mobile extraction system with wet separator - Industrial extraction system Use for combustible dusts (for aluminum and magnesium dusts); EX protected Construction: sheet steel housing Iedpsu Nv A Ejfx Ag Dea Dust cartridge dust class M 10 m² and dust class H 10 m² Dust extractor: -size Ø 580 x 1,000mm -Pipe connection Ø 160 x 60mm -mechanical filter Dust container: -size Ø 580 x 550mm -with 4 wheels Ø 100x36mm) swiveling Water separator: -with 2" drain valve with hand lever -max. capacity 75 liter *

Condition: used, Year of construction: 2015, operating hours: 424 h, type of input current: three-phase, overall weight: 1,000 kg, total width: 1,700 mm, total length: 1,650 mm, total height: 2,900 mm, suction capacity: 5,000 m³/h, filter area: 80 m², NOVUS Air FTower Filtration Tower, 5000 m³/h Industrial welding hall air filtration – suitable for various technological operations in manufacturing plants, primarily metalworking. Top air intake and draft-free bottom air discharge – delivers purified air directly to the workstations. Layered filtration and ventilation principle; the unit does not require duct installation. Cartridge filter inserts – self-cleaning via compressed air pulses during operation. Filter cleaning is controlled by pressure differential – ensures no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from above, filtered, and released at floor level as breathing-quality air, free of drafts, at a velocity below 1.2 m/s – precisely where employees inhale it, covering a wide 270° range. The tower operates according to the layered ventilation method, recommended by trade associations and considered the optimal air circulation method. Year of manufacture: 2015 Operating hours: 424 h Specifications: — Fan power: 5.5 kW — Capacity: 5000 m³/h — Filtration surface area: 80 m² — Filter cartridges: 4 units — Additional final stage F9-class fine filter increases purification efficiency and further protects the fan in case of main filter damage. — 100-liter dust drawer — Very quiet operation: 75 dB(A) — Filtration efficiency: > 99.6 % The unit is in very good technical condition. Isdpfoxg Nx Tox Ag Dja Warehouse number: 1049

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: SN037366, overall weight: 268 kg, warranty duration: 12 months, Shows slight signs of use. Iedpfx Agjw Dbpho Dsa

Condition: new, Extraction capacity of filter unit at spigot*: 2420 m³/h Total power consumption*: 1.84 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 72 db(A) Dimensions L/W/H in mm: L 1290 / W 588 /H 595 Colour: RAL 7035 Weight: 118 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application Ijdpfxeh Rfb Hj Ag Doa - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 2190/1460/H2080 mm -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos -Weight: 200 kg / 590 kg Isdpfx Agowrb I Hj Dsa

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, overall weight: 95 kg, Equipment: documentation/manual, type plate available, Extraction capacity of filter unit at spigot*: 2200 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 1623 / W 508 /H 545 Colour: RAL 7035 Weight: 95 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Filter equipment*: Isdpfeum Uzasx Ag Dja - 40 mm aluminium mesh pre-filter (optional/retrofittable: PrePac pre-filter package) - 1 piece electrostatic filter cell - 20 mm knitted aluminium post-filter (optional: 40 mm post-filter range) OPTIONAL: Several pre-filter packages possible The application: Horizontal, electrostatic air cleaner with EC centrifugal fan for separating oil mist, emulsion mist and smoke from the hall air in recirculation mode. Vertical raw air capture via intake manifold with suction nozzle. Clean air recirculation via adjustable diffusion grille. Your advantages of the ELBARON series: - 6 appliance variants available - Directly from the manufacturer - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large programme of mounting and connection accessories - Quality made in Germany We have developed the hall extraction system as a cost-effective alternative to expensive centralised extraction systems or complex individual machine extraction systems. This allows you to protect the health of your employees and maintain your factory building without major investment. We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter devices on the market and are in use worldwide.

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, welding fume filter, welding fume extraction, flue gas suction fan Iodpfx Ajrw A U Isg Dea -Manufacturer: Coral, dry grinding dust extraction filter system type GRINDEX -Power: 0.75 kW / 2810 rpm -Individual components/technical data: see photos -Dimensions: 855/750/H1085 mm -Weight: 120 kg

Condition: new, Extraction capacity of filter unit at spigot*: 600/720* m³/h Total power consumption*: 0.42 kW Operating voltage: 230 V, 50/60 Hz,1Ph+N+PE Noise level*: 67 db(A) Dimensions L/W/H in mm: approx. L 800 / W 493 /H 415 Colour: RAL 7035 Weight: 53 kg Manufacturer: ISI Industrieprodukte GmbH, Germany * Depending on the filter equipment Special voltage or special colour on request Your advantages: - Compact dimensions Isdpfjh Rynuox Ag Doa - ISI-TRONIC as standard - Electronically controlled EC fan as standard - Adjustable speed and air flow - Washable pre-filter - H13 particulate air filter provides separation rates of up to up to 99.95%. - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With our TEBARON, we offer a compact air filtration unit which meets today's diverse possibilities of processing and the possibilities of machining and the resulting pollutant profiles. pollutant profiles. The TEBARON is a compact air filtration unit for small to medium to medium-sized machine workrooms for the separation of emulsion mist. Our main development goals were compact dimensions with maximum energy efficiency economical operation due to low follow-up costs and maximum sustainability. To achieve these goals, we use highly efficient, controllable EC fans in the TEBARON- -series we use highly efficient, controllable EC fans. The standard, integrated pre-filter package consists of three parts and is completely washable! It is highly effective against liquids and large to medium particles to protect the main filter and maximise its and maximise its service life. The main filter can be individually adapted to the adapted to the application application. In the standard version, we use an H13 HEPA filter to achieve filter to achieve a filtration efficiency of 99.95% against particles of of 0.3 μ.

Condition: used, Year of construction: 2006, Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil and emulsion mist separator, suspended matter filter Iedpfx Ageiz Udwj Dea -Manufacturer: WW, oil mist separator filter system type ME-FI 600 -Voltage: 230V / 0.15 kW -Filter: without filter -Quantity: 1 piece available -Dimensions: 710/390/H445 mm -Weight: 38 kg

Condition: new, Extraction capacity of filter unit at spigot*: 980 m³/h Total power consumption*: 0.71 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 68 db(A) Dimensions L/W/H in mm: L 1290 / W 345 /H 595 Colour: RAL 7035 Iodjh Rfbqspfx Ag Doa Weight: 79 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Separation of emulsion mist, for medium to very large machine workrooms. Your advantages of the COBARON series: - 15 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Adjustable speed and air flow rate - Available with a wide range of filters - High-quality filter media in the pre-filter and main filter area - Separation rates of up to 99.95 - Large range of mounting and connection accessories - Flexibly adaptable to the application - Optimum service life - Quality Made in Germany With COBARON, we offer a filter system that meets today's diverse processing possibilities and the resulting pollutant profiles. In the standard programme alone, the COBARON combination filter system offers various filter equipment variants and can thus be variably configured for many applications. The various configuration levels of the COBARON series were specially developed for applications that were borderline cases for many filter systems (mechanical or electrostatic). The combination of both proven filter principles in the appropriate application increases the effectiveness of the air filter and extends the service life. COBARON can be operated as a purely mechanical filter unit with different filter stages - or additionally configured with an electrostatic filter cell. Our filter units are already digitalised as standard and can be controlled with a laptop, for example.

Condition: good (used), Year of construction: 1998, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, cartridge dust extraction system -Manufacturer: BTR Environmental, Unicell cartridge dust extraction system -Type: C16-2K7 -Extraction fan power: 3.0 kW -Inlet: Ø 220 mm -Individual components: see photos -Dimensions: 1210/1040/H2340 mm -Weight: 474 kg Iedpfxeu Uww Se Ag Dsa

Condition: new, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 66 db(A) Dimensions L/W/H in mm: L 111 / W 508 /H 545 Colour: RAL 7035 Weight: 111 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request NEW: Pre-filter system (optional) Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer Ijdpfxepkwaus Ag Dja - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.