Filter system extraction system

unbekannt Stofffilter

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: -Filter frame: 2190/1460/H2080 mm -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos Rodpfx Aowrb I Hoc Tocf -Weight: 200 kg / 590 kg

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Rodpsudi Uzefx Ac Tecf Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 3-phase 400V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg Additionally 2 M42 saw blades 5L Emulsol ZW580 magnetic chip collector

Condition: excellent (used), color: black, lifting height: 31,000 mm, Year of construction: 2018, operating hours: 1,940 h, General information Field of application: Construction Weights Empty weight: 3.475 kg Functional Lifting capacity: 1.600 kg Dimensions of cargo space: 900 x 199 x 258 cm CE mark: yes Condition Technical condition: very good Visual appearance: very good Other information Maximum lifting capacity at end of jib: 350 kg Delivery terms: EXW Production country: DE Additional information Please contact Vink Machinery for more information = Additional options and accessories = - Hook blocks Rodpexxaxbefx Ac Tecf = Remarks = Paus PTK 31 * 2018 * Diesel * 31-meter hook height * Remote control * Automatic outrigger * 24.5-meter horizontal reach * 1600 kg lifting capacity * 3475 kg net weight * Wheel drive via remote control * Documents included

Condition: ready for operation (used), Year of construction: 2015, Length: 9401mm, width: 2091mm, height: 5668mm, weight: 8.816t, with pipes and documentation, the dust collector was not used much. Rsdpjk Ea Uusfx Ac Tocf

Condition: new, range L-W-H 675 x 510 x 880 mm weight 56 kg Rjdpfx Aeu Iml Iec Tjcf 5 St. Professional tool trolley for workshop equipment. Internal dimensions of the upper 4 drawers 56 x 43 x 10 cm. Inner dimensions of the lower drawer 56 x 43 x 17 cm. Dimensions of the wheels 100 x 30 mm.

Year of construction: 1991, condition: good (used), Dust extraction,welding fume extraction,filtering,self-cleaning filter,pneumatic,vacuum dust collector,absorber for plasma,laser,sandblasting and all kinds of dry dust. Donaldson Torit model: 3DF18 Cyclo - with pre-separator Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, thus high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Cartridge filter cartridges. 7.5 Kw fan Capacity 6000 m3/h Underpressure 3000 Pa Filtration area 378 m2 Inlet diameter - 350 mm Rjdpfxjmrm Ras Ac Tocf Ultra WEB filter cartridges 18 pcs.

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 8 St. Tool trolley with 8 drawers, all with tools. - The pull-out drawers are all ball-bearing. - The entire workshop trolley is lockable. - The workshop trolley has 4 stable castors, 2 steerable and lockable. - The tools included are made of chrome vanadium steel. - The workshop trolley has 4 stable castors, 2 steerable, 2 lockable, which ensure very comfortable rolling. On the tool trolley there is a stable worktop made of polypropylene plastic. - The tools included in the workshop trolley are made of chrome vanadium steel and are stored in Styrofoam/foam inserts. + Drawer 1: - 1/4" inch: 13 nuts from 4mm to 14mm, 11 long nuts 4mm – 13mm Ratchet, universal joint, extension. - 3/8" inch: 10 nuts from 10mm to 19mm, 11 long nuts from 6mm to 19mm Ratchet, universal joint, extension. - 1/2" inch: 17 nuts from 8mm to 32mm, 9 long nuts from 10mm to 22mm Ratchet, universal joint, extension. + Drawer 2: - Accessories 1/4" inch ratchet: Torx nuts without hole T8,T9,T10,T15,T20,T25,T27,T30,T40 Torx nuts with hole TT8,TT9,TT10,TT15,TT20,TT25,TT27,TT30,TT40. Allen nuts H3 to H8 Slotted nuts SL4 to SL7 Cross nuts PZ0 to PZ3, PH0 to PH3 Multi-tooth nuts M8, M10, M12 Five-star nuts TS10, TS15, TS20, TS25, TS27, TS30, TS40, TS45, TS50 - Accessories 3/8" inch ratchet: Attachment for bits Torx nuts without hole T40, T45, T50, T55, T60, T70 Torx nuts with hole TT40, TT45, TT50, TT55, TT60, TT70 Allen nuts – H7, ??H8, H10, H12, H14 Slotted nuts SL8, SL10, SL12 Cross nuts PZ3, PZ4, PH4, PH8 - Accessories 1/2" inch ratchet: Allen H14,H17,H19,H22,H24 Allen key H5,H10,H11,H13 Torx T40,T45,T50,T55,T60,T70,T80 Ribe R9, R10, multi-tooth M16 Multi-tooth M9,M10,M12,M14,M16,M18 Short attachment, long attachment, medium attachment, Torx T30,T45,T50, Allen key H7 + Drawer 3: - Open-end ratchet wrench 8-9-10-11-12-13-14-15-16-17-19-22mm; - Double ring spanner set 8-piece 6-7mm, 8-9mm, 10-11mm, 12- 13mm, 14-15mm, 16-17mm, 18-19mm, 20-22mm - Torque wrench + Drawer 4: - Precision mechanics screwdriver Slotted: SL3.0 x 100mm, Cross: PH0 x 100mm - Screwdriver with soft grip and outside hexagon: Slotted: SL6 x 38mm ; SL5 x 75mm ; SL6 x 100mm ; SL8 x 150mm Cross: PH2 x 38mm ; PH1 x 75mm ; PH2 x 100mm ; PH3 x 150mm - Torx screwdriver: T6 x 80 ; T7 x 80 ; T8 x 80 ; T9 x 80 ; T10 x 80 ; Rcsdozb Rbtjpfx Ac Tsf T15 x 100 ; T20 x 100 ; T25 x 100; T27 x 100 T30 x 100 ; T40 x 150. + Drawer 5: - T-handle Allen / hexagon set with ball head: 3 x 115mm ; 4 x 120mm ; 5 x 140mm ; 6 x 160mm ; 7 x 170mm ; 8 x 175mm ; 10 x 200mm. - T-handle TORX T10 – T40 + Drawer 6 - Circlip pliers set inside/outside 4 pcs., 2x curved, 2x straight - Pliers set: combination pliers, side cutters, straight needle-nose pliers, curved needle-nose pliers, pipe wrench. - hammer + Drawer 7 - Socket wrenches 6, 7, 8, 10, 11, 12, 13, 14mm + Drawer 8 - Tools for bodywork processing

Condition: excellent (used), functionality: fully functional, Saw dust extraction unit SCHUKO STA 5.5 kW Width: 2200 mm Height: 3600 mm Rcjdjx I N A Dspfx Ac Tef Depth: 1100 mm Bag length: 200 cm Filter sleeve diameter: 140 mm Number of filter sleeves: 54 pcs Collection bags: 3 pcs Collection bag diameter: 500 mm Suction port: 250 mm Main motor power: 5.5 kW Filter bag shaking system Extraction pipes included

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz Rsdsu Nv Afepfx Ac Tjcf power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Suction capacity approx. 2000m³ mobile over 4 wheels, front braked *

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM300SA Dust Collector is an advanced industrial dust extraction system designed for intensive operation in woodworking shops, industrial facilities, and furniture manufacturing plants. Combining an impressive 3,900 m³/h extraction capacity, robust construction, and excellent suction performance, the FM300SA is built for demanding environments requiring reliable, continuous operation with large volumes of waste material. Equipped with four fabric filter bags and a WhirlWind series multi-blade metal impeller, the FM300SA provides efficient dust separation, stable airflow, and long-lasting performance in professional production environments. Key Features 2.2 kW / 400 V motor – ensures stable and efficient industrial operation. Extraction capacity of 3,900 m³/h – enables effective dust removal from multiple workstations simultaneously. WhirlWind multi-channel metal impeller – dynamically balanced for high efficiency, quiet operation, and vibration-free performance. Four fabric filter bags – provide an increased filtration area for longer operation with fewer interruptions. Reinforced steel construction with additional support brackets – ensures excellent stability and durability under heavy loads. Quick-release bag mounting system – allows convenient, tool-free bag replacement. Four-point sealing system – improves overall system tightness and maintains maximum suction efficiency. Mobile base with bearing-mounted wheels – enables easy movement around production halls and workshops. Construction and Technology Redpfx Acjvu A Dio Tecf The heart of the FM300SA is a precisely balanced WhirlWind multi-blade metal fan, designed to generate powerful and consistent suction pressure. The construction has been engineered for intensive industrial use, with reinforced supports and a double load-bearing structure ensuring maximum stability even when the collection bags are fully loaded. All critical connection points are fitted with flexible seals to improve airtightness and minimize suction losses. The multi-bag filtration system efficiently separates extracted air from sawdust and wood waste, ensuring reliable dust collection performance. Precision and Performance The CORMAK FM300SA chip extractor allows simultaneous operation with multiple woodworking machines thanks to its flexible extraction configuration: 1 × Ø150 mm extraction inlet, or 3 × Ø100 mm extraction inlets The four fabric filter bags provide a total capacity of 220 litres, reducing the frequency of emptying and improving production continuity. The unit operates smoothly, quietly, and with minimal vibration, contributing to improved operator comfort and efficient dust control. Standard Equipment 4 fabric filter bags Mobile metal base with bearing-mounted wheels Optional Equipment Galvanized hose clamps for extraction hose installation Cartridge filter with filtration efficiency down to 2 microns Technical Specifications Specification Value Extraction capacity 3,900 m³/h Maximum vacuum pressure 1,750 Pa Noise level 75 dB Filter bag capacity 220 L Number of bags 4 × fabric filter bags Extraction inlet 1 × Ø150 mm / 3 × Ø100 mm Overall dimensions (L × W × H) 1,400 × 570 × 2,250 mm Weight 64 kg Motor power 2.2 kW Power supply 3-phase, 400 V Operating manual CE Declaration of Conformity Yes