Industrial vacuum cleaner

MECAIR 3001-100

Condition: new, Wet exhaust system - available in steel and stainless steel Itedpfx Amsci Tlreijg - suction output 1650, 3750 or 7000 m3/h - engine 3,5.5 or 15 kW

Condition: used, Year of construction: 2015, front tire size: 650/60R34, Equipment: compressed air brake, Rear wheel weights Lower links Cat 3/3 Quick Steer Valtra Evolution / seat 2x sockets 12 V Tires 4x NEW front Mitas 650/60 R34 / Iedpfxor N Apfe Amietg

Condition: as good as new (ex-display), Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Feed speed (m/s) 1-5 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Iodpfx Amjtzkgbeietg Feed motor (kW) (2x) 0.12 Total power (kW) 5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250

Condition: new, Year of construction: 2023, Extraction capacity of filter unit at spigot*: 2600 m³/h (free-eye) Total power consumption*: 0.62 kW Operating voltage: 400 V, 50/60 Hz,3Ph+PE Noise level*: 65 db(A) Dimensions L/W/H in mm: L 975 / W 508 /H 545 Colour: RAL 7035 Weight: 90 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on filter equipment Special voltage or special colour on request Application: Extraction of oil mist, emulsion mist (for emulsions with higher oil contents) and smoke, for small to very large machine workrooms | Oil mist separator. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany Ijdpfxjh Rdxno Amietg We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as Option and can be controlled, for example, with a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: good (used), HR 4 automatic polisher Manufacturer: Hau Itsdpeqmfv Dofx Amieg With 4 working spindles. 1 spindle is used for loading and unloading, two work spindles are in constant use.

Condition: excellent (used), Year of construction: 1994, center height: 100 mm, grinding length: 380 mm, total width: 1,500 mm, total length: 1,300 mm, total height: 1,350 mm, grinding diameter: 200 mm, spindle speed (max.): 1,800 rpm, overall weight: 2,100 kg, pivoting range: 10 °, Centre height: 100mm Grinding Ø: 200mm Grinding length: 380mm Grinding stone dimensions:300 x 50 x 127mm Grinding stone speeds: 1800Rpm Table inclasement: 10° Tailstock: 4Mk Length: 1300mm Width: 1500mm Height: 1350mm Weight: 2100kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Ijdpfxsyu Nqgj Amistg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 250 kg, load capacity: 25 kg, controller manufacturer: Yaskawa, controller model: YRC1000, teach pendant manufacturer: Yaskawa, Equipment: documentation/manual, Industrial robot YASKAWA GP 25 Control unit YRC 1000 This robot was only used as a demonstration robot. Only about 600 operating hours. Ready for collection. Itedpfjxb T Syjx Amieg

Condition: new, Bernardo edge sanding machine KSM 3000 C with veneer sanding device Technical specifications working table 960 x 350 mm table height adjustment 210 mm belt length 3000 mm belt width 150 mm sanding belt back 1060 x 200 mm sanding unit swivelling 90° - 45° belt speed 20 m/sec. additional table 330 x 330 mm Oscillation stroke 20 mm Oscillation motor 0,25 kW (0,34 PS) suction connection Ø 120 mm Motor output power S1 100% 3,0 kW (4,0 PS) Motor input power S6 40% 4,5 kW (6,0 PS) Voltage 400 V Itodpod N Tdmefx Amiog Machine dimensions (W x D x H) 1910 x 840 x 1020 mm Weight approx. 330 kg Scope of delivery Sanding belt 3000 x 150 mm - K100 Sanding belt oscillation Veneer sanding device additional table Graphite coating Mitre fence Sanding shoe Suction hose Features - Heavy machine stand in torsion- and vibration-free construction, extremely stable - Grooved infeed fence, ideal for sanding veneer overhangs - Suction connection 80 / 100 mm on both sides for optimum chip removal - Oscillating sanding belt ensures high stock removal and a clean sanding pattern - Maintenance-free sanding belt oscillation with separate gear motor, optionally switchable - Height-adjustable sanding table for utilisation of the entire sanding belt - Standard veneer edge sanding device with fine adjustment - Quick changeover from veneer to solid wood sanding possible - Height adjustment of the working table or swivelling of the sanding unit via handwheels - spring

Condition: new, Year of construction: 2024, table length 3000 mm table width 1500 mm burner heads 1 Control CNC workpiece weight 1500 kg traversing speed 200 m/min total power requirement 55 kW dimensions of the machine ca. 10050 x 4920 x 2200 mm CUTTING CAPACITY: STRUCTURAL STEEL 40 mm STAINLESS STEEL 40 mm ALUMINUM 40 mm Iodpfx Amju Dpb Rsietg BRASS 16 mm

Condition: used, Year of construction: 2024, operating hours: 96 h, machine/vehicle number: 2152900, Weights Empty weight: 7.040 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 1.200 cm Other information Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Tyre brand: - Max. horizontal reach: 722 m Transport dimensions (LxWxH): 5.64x1.2x1.99 Additional information Isdpfxjtx Rp Se Amiotg Please contact PFEIFER GROUP for more information